Impersonation of AP issue
Hi,
i have a WISM with release 6.0 and 150 AP connected all in the same RRM. In the TrapLog I see a lot of |"Impersonation of AP......" messages. This issue is between AP connected to the same WISM and in he same RRM.
Any idea?
Regards
Giovanni
An
Hi Roman,
sorry for the late but I'm in vacation. I read now the answer at the case that I opened to the TAC about this issue.
From the case notes which you have added, I can see that you are affected by the bug:
CSCsi18369
AP Auth: Known rogues are reported as impersonation alerts
Symptom:
If AP authentication is enabled, the controller will report the entries in the known AP MAC address
list, as impersonation alerts.
Workaround:
Use MFP or disable AP Authentication
Regards
Giovanni
Similar Messages
-
Permissions issues on folder/file created by impersonation workflow
Hi,
I have used impersonation to create a new
folder, copy a Word
template inside it, and rename the file. Content
management is on but checkin/out is off. When the doc is printed or saved, it should prompt for a label and barcode. The workflow works fine and when I test it the barcode/label works, but when anyone aside else (aside from our admin) tries to
edit the document it downloads to
their desktop and the label/barcode prompt doesn't happen. Also no refresh green arrow icon over the Save command in Word. We are all members of the same Owners group for that library (inherited from parent doc centre site: Full Control, Limited Access) although
I am also a Designer and User.
Any ideas?
Should I start experimenting with unique permissions until
I hit on the right set? There's only 1-3 people who need to be able to edit the documents. I'm not a programmer.
Thanks.Hi,
I have used impersonation to create a new
folder, copy a Word
template inside it, and rename the file. Content
management is on but checkin/out is off. When the doc is printed or saved, it should prompt for a label and barcode. The workflow works fine and when I test it the barcode/label works, but when anyone aside else (aside from our admin) tries to
edit the document it downloads to
their desktop and the label/barcode prompt doesn't happen. Also no refresh green arrow icon over the Save command in Word. We are all members of the same Owners group for that library (inherited from parent doc centre site: Full Control, Limited Access) although
I am also a Designer and User.
Any ideas?
Should I start experimenting with unique permissions until
I hit on the right set? There's only 1-3 people who need to be able to edit the documents. I'm not a programmer.
Thanks. -
Database access issue with EXECUTE AS with impersonated User account
Hello,
I have been facing one issue with EXECUTE AS option in SQL Server 2008 R2. Following is the scenario:
I have two databases TestDB1 and TestDB2 on the same SQL Server instance. I have SQL Admin level permissions on the server. I have written a stored procedure in TestDB1 which will execute the scripts(SELECT Statement) againest the table from TestDB2(using
three part query). To execute the proc from TestDB1 I have used EXECUTE AS option with a user (User1) having select permissions on table from TestDB2. The same proc working fine when I use table from TestDB1 but not working on TestDB2 database. Thorwing error
saying permission denied. I have tried enabling the Ownership chains on both the databases but no luck.
Please help me with the situation here.
Thanks!
Swami A Polnati.You can also use EXECUTE AS. But then you need to set the database trustworthy, which is not good for security reasons.
Enabling cross-database chaining will not help, since you are using dynamic SQL.
Dan was kind to point you to my article. I recommend that you read it, and learn to embrace the technique with certificates. Yes, it is a long article and I understand that you are impatient to get a solution quickly. However, the article is written from
the point of view that the reader is interested in learning for the future and not only get a solution for the moment. Certificate-signing as a technique is very very useful in several contexts.
The article does also discuss EXECUTE AS, and I discuss in more detail why setting the database trustworthy may be a security risk. (And as long you don't fully understand what I'm talking about, it is a security risk.)
Erland Sommarskog, SQL Server MVP, [email protected] -
Installation Issue with Adobe Reader 11.0.03.
Hello,
I am having issue getting Adobe Reader XI to install onto a machine and needing help resolving it. The machine itself meet and exceed the requirement for the installation. There was a previous version of it installed, but was remove via Group Policy and now it is being deploy via SCCM 2012. So far out of 100+ machines all have successful installed adobe reader XI through the new deployment, except one. Incase you're wondering what the installation logs look like I have copy and paste it below:
=== Verbose logging started: 6/5/2013 17:09:44 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\Windows\system32\msiexec.exe ===
MSI (c) (C4:E0) [17:09:44:988]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (C4:E0) [17:09:44:988]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (C4:F0) [17:09:44:994]: Resetting cached policy values
MSI (c) (C4:F0) [17:09:44:994]: Machine policy value 'Debug' is 0
MSI (c) (C4:F0) [17:09:44:994]: ******* RunEngine:
******* Product: C:\Windows\ccmcache\2p\AdbeRdr11000_en_US.msi
******* Action:
******* CommandLine: **********
MSI (c) (C4:F0) [17:09:44:995]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (C4:F0) [17:09:44:995]: Grabbed execution mutex.
MSI (c) (C4:F0) [17:09:45:042]: Cloaking enabled.
MSI (c) (C4:F0) [17:09:45:042]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (C4:F0) [17:09:45:045]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D8:90) [17:09:45:050]: Running installation inside multi-package transaction C:\Windows\ccmcache\2p\AdbeRdr11000_en_US.msi
MSI (s) (D8:90) [17:09:45:050]: Grabbed execution mutex.
MSI (s) (D8:AC) [17:09:45:052]: Resetting cached policy values
MSI (s) (D8:AC) [17:09:45:052]: Machine policy value 'Debug' is 0
MSI (s) (D8:AC) [17:09:45:052]: ******* RunEngine:
******* Product: C:\Windows\ccmcache\2p\AdbeRdr11000_en_US.msi
******* Action:
******* CommandLine: **********
MSI (s) (D8:AC) [17:09:45:066]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (D8:AC) [17:09:45:123]: Machine policy value 'LimitSystemRestoreCheckpointing' is 0
MSI (s) (D8:AC) [17:09:45:123]: Note: 1: 1715 2: Adobe Reader XI (11.0.03)
MSI (s) (D8:AC) [17:09:45:123]: Calling SRSetRestorePoint API. dwRestorePtType: 0, dwEventType: 102, llSequenceNumber: 0, szDescription: "Installed Adobe Reader XI (11.0.03).".
MSI (s) (D8:AC) [17:09:50:827]: The call to SRSetRestorePoint API succeeded. Returned status: 0, llSequenceNumber: 230.
MSI (s) (D8:AC) [17:09:50:889]: File will have security applied from OpCode.
MSI (s) (D8:AC) [17:09:51:049]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'C:\Windows\ccmcache\2p\AdbeRdr11000_en_US.msi' against software restriction policy
MSI (s) (D8:AC) [17:09:51:049]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (s) (D8:AC) [17:09:51:049]: SOFTWARE RESTRICTION POLICY: C:\Windows\ccmcache\2p\AdbeRdr11000_en_US.msi is not digitally signed
MSI (s) (D8:AC) [17:09:51:052]: SOFTWARE RESTRICTION POLICY: C:\Windows\ccmcache\2p\AdbeRdr11000_en_US.msi is permitted to run at the 'unrestricted' authorization level.
MSI (s) (D8:AC) [17:09:51:052]: End dialog not enabled
MSI (s) (D8:AC) [17:09:51:052]: Original package ==> C:\Windows\ccmcache\2p\AdbeRdr11000_en_US.msi
MSI (s) (D8:AC) [17:09:51:052]: Package we're running from ==> C:\Windows\Installer\2a70f78.msi
MSI (s) (D8:AC) [17:09:51:059]: APPCOMPAT: Compatibility mode property overrides found.
MSI (s) (D8:AC) [17:09:51:059]: APPCOMPAT: looking for appcompat database entry with ProductCode '{AC76BA86-7AD7-1033-7B44-AB0000000001}'.
MSI (s) (D8:AC) [17:09:51:059]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (D8:AC) [17:09:51:065]: MSCOREE not loaded loading copy from system32
MSI (s) (D8:AC) [17:09:51:069]: Machine policy value 'TransformsSecure' is 0
MSI (s) (D8:AC) [17:09:51:069]: User policy value 'TransformsAtSource' is 0
MSI (s) (D8:AC) [17:09:51:070]: Machine policy value 'DisablePatch' is 0
MSI (s) (D8:AC) [17:09:51:070]: Machine policy value 'AllowLockdownPatch' is 0
MSI (s) (D8:AC) [17:09:51:070]: Machine policy value 'DisableMsi' is 0
MSI (s) (D8:AC) [17:09:51:070]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (D8:AC) [17:09:51:071]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (D8:AC) [17:09:51:071]: Running product '{AC76BA86-7AD7-1033-7B44-AB0000000001}' with user privileges: It's not assigned.
MSI (s) (D8:AC) [17:09:51:071]: Machine policy value 'DisableLUAPatching' is 0
MSI (s) (D8:AC) [17:09:51:071]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (D8:AC) [17:09:51:071]: APPCOMPAT: looking for appcompat database entry with ProductCode '{AC76BA86-7AD7-1033-7B44-AB0000000001}'.
MSI (s) (D8:AC) [17:09:51:071]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (D8:AC) [17:09:51:071]: Transforms are not secure.
MSI (s) (D8:AC) [17:09:51:072]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'D:\ReaderXI.log'.
MSI (s) (D8:AC) [17:09:51:072]: Command Line: CURRENTDIRECTORY=C:\Users\lavdang CLIENTUILEVEL=2 CLIENTPROCESSID=7364
MSI (s) (D8:AC) [17:09:51:072]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{8017784A-94A5-40AD-AE48-D46040E2A00C}'.
MSI (s) (D8:AC) [17:09:51:072]: Product Code passed to Engine.Initialize: ''
MSI (s) (D8:AC) [17:09:51:072]: Product Code from property table before transforms: '{AC76BA86-7AD7-1033-7B44-AB0000000001}'
MSI (s) (D8:AC) [17:09:51:072]: Product Code from property table after transforms: '{AC76BA86-7AD7-1033-7B44-AB0000000001}'
MSI (s) (D8:AC) [17:09:51:072]: Product not registered: beginning first-time install
MSI (s) (D8:AC) [17:09:51:072]: Product {AC76BA86-7AD7-1033-7B44-AB0000000001} is not managed.
MSI (s) (D8:AC) [17:09:51:072]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (D8:AC) [17:09:51:072]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (D8:AC) [17:09:51:072]: MSI_LUA: Elevation required to install product, will prompt for credentials
MSI (s) (D8:AC) [17:09:52:894]: MSI_LUA: Credential Request return = 0x0
MSI (s) (D8:AC) [17:09:52:894]: MSI_LUA: Elevated credential consent provided. Install will run elevated
MSI (s) (D8:AC) [17:09:52:894]: Note: 1: 2205 2: 3: MsiPackageCertificate
MSI (s) (D8:AC) [17:09:52:894]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
MSI (s) (D8:AC) [17:09:52:894]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (D8:AC) [17:09:52:894]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (D8:AC) [17:09:52:894]: Adding new sources is allowed.
MSI (s) (D8:AC) [17:09:52:895]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
MSI (s) (D8:AC) [17:09:52:895]: Package name extracted from package path: 'AdbeRdr11000_en_US.msi'
MSI (s) (D8:AC) [17:09:52:895]: Package to be registered: 'AdbeRdr11000_en_US.msi'
MSI (s) (D8:AC) [17:09:52:900]: PROPERTY CHANGE: Modifying ADMIN_INSTALL property. Its current value is 'NO'. Its new value: 'YES'.
MSI (s) (D8:AC) [17:09:52:900]: PROPERTY CHANGE: Adding IsAdminPackage property. Its value is '1'.
MSI (s) (D8:AC) [17:09:52:900]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (D8:AC) [17:09:52:900]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (D8:AC) [17:09:52:900]: Product installation will be elevated because user provided elevated credentials and product is being installed per-machine.
MSI (s) (D8:AC) [17:09:52:900]: Running product '{AC76BA86-7AD7-1033-7B44-AB0000000001}' with elevated privileges: Product is assigned.
MSI (s) (D8:AC) [17:09:52:900]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:\Users\lavdang'.
MSI (s) (D8:AC) [17:09:52:900]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '2'.
MSI (s) (D8:AC) [17:09:52:900]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '7364'.
MSI (s) (D8:AC) [17:09:52:900]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (D8:AC) [17:09:52:900]: RESTART MANAGER: Disabled by MSIRESTARTMANAGERCONTROL property; Windows Installer will use the built-in FilesInUse functionality.
MSI (s) (D8:AC) [17:09:52:900]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
MSI (s) (D8:AC) [17:09:52:900]: TRANSFORMS property is now:
MSI (s) (D8:AC) [17:09:52:900]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '300'.
MSI (s) (D8:AC) [17:09:52:903]: SHELL32::SHGetFolderPath returned: C:\Users\lavdang\AppData\Roaming
MSI (s) (D8:AC) [17:09:52:905]: SHELL32::SHGetFolderPath returned: C:\Users\lavdang\Favorites
MSI (s) (D8:AC) [17:09:52:907]: SHELL32::SHGetFolderPath returned: C:\Users\lavdang\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (s) (D8:AC) [17:09:52:909]: SHELL32::SHGetFolderPath returned: C:\Users\lavdang\Documents
MSI (s) (D8:AC) [17:09:52:911]: SHELL32::SHGetFolderPath returned: C:\Users\lavdang\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (s) (D8:AC) [17:09:52:913]: SHELL32::SHGetFolderPath returned: C:\Users\lavdang\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (D8:AC) [17:09:52:914]: SHELL32::SHGetFolderPath returned: C:\Users\lavdang\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (D8:AC) [17:09:52:915]: SHELL32::SHGetFolderPath returned: C:\Users\lavdang\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (D8:AC) [17:09:52:915]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (D8:AC) [17:09:52:916]: SHELL32::SHGetFolderPath returned: C:\Users\lavdang\AppData\Local
MSI (s) (D8:AC) [17:09:52:917]: SHELL32::SHGetFolderPath returned: C:\Users\lavdang\Pictures
MSI (s) (D8:AC) [17:09:52:919]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (D8:AC) [17:09:52:920]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (D8:AC) [17:09:52:921]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (s) (D8:AC) [17:09:52:922]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (D8:AC) [17:09:52:923]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (D8:AC) [17:09:52:926]: SHELL32::SHGetFolderPath returned: C:\Users\lavdang\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (D8:AC) [17:09:52:927]: SHELL32::SHGetFolderPath returned: C:\Users\lavdang\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (D8:AC) [17:09:52:928]: SHELL32::SHGetFolderPath returned: C:\Users\lavdang\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (s) (D8:AC) [17:09:52:929]: SHELL32::SHGetFolderPath returned: C:\Users\lavdang\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (s) (D8:AC) [17:09:52:930]: SHELL32::SHGetFolderPath returned: C:\Users\lavdang\Desktop
MSI (s) (D8:AC) [17:09:52:931]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (D8:AC) [17:09:52:932]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (D8:AC) [17:09:52:932]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (s) (D8:AC) [17:09:52:935]: MSI_LUA: Setting AdminUser property to 1 because this is the client or the user has already permitted elevation
MSI (s) (D8:AC) [17:09:52:935]: PROPERTY CHANGE: Adding AdminUser property. Its value is '1'.
MSI (s) (D8:AC) [17:09:52:935]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
MSI (s) (D8:AC) [17:09:52:935]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
MSI (s) (D8:AC) [17:09:52:935]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (s) (D8:AC) [17:09:52:935]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (D8:AC) [17:09:52:935]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'SPEC Services, Inc.'.
MSI (s) (D8:AC) [17:09:52:935]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (D8:AC) [17:09:52:935]: PROPERTY CHANGE: Adding COMPANYNAME property. Its value is 'SPEC Services, Inc.'.
MSI (s) (D8:AC) [17:09:52:935]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Windows\Installer\2a70f78.msi'.
MSI (s) (D8:AC) [17:09:52:935]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'C:\Windows\ccmcache\2p\AdbeRdr11000_en_US.msi'.
MSI (s) (D8:AC) [17:09:52:935]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (s) (D8:AC) [17:09:52:935]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (D8:AC) [17:09:52:935]: Machine policy value 'DisableRollback' is 0
MSI (s) (D8:AC) [17:09:52:935]: User policy value 'DisableRollback' is 0
MSI (s) (D8:AC) [17:09:52:935]: PROPERTY CHANGE: Adding UILevel property. Its value is '3'.
=== Logging started: 6/5/2013 17:09:52 ===
MSI (s) (D8:AC) [17:09:52:936]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (s) (D8:AC) [17:09:52:936]: Doing action: INSTALL
Action start 17:09:52: INSTALL.
MSI (s) (D8:AC) [17:09:52:937]: Running ExecuteSequence
MSI (s) (D8:AC) [17:09:52:937]: Doing action: SystemFolder.21022.08.Microsoft_VC90_CRT_x86.RTM.0138F525_6C8A_333F_A105_14AE030B9A54
MSI (s) (D8:AC) [17:09:52:937]: PROPERTY CHANGE: Adding SystemFolder.21022.08.Microsoft_VC90_CRT_x86.RTM.0138F525_6C8A_333F_A105_14AE030B9A54 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 17:09:52: SystemFolder.21022.08.Microsoft_VC90_CRT_x86.RTM.0138F525_6C8A_333F_A105_14AE030B9A54.
MSI (s) (D8:AC) [17:09:52:937]: Doing action: WindowsFolder_x86_VC.AFA96EB4_FA9F_335C_A7CB_36079407553D
Action ended 17:09:52: SystemFolder.21022.08.Microsoft_VC90_CRT_x86.RTM.0138F525_6C8A_333F_A105_14AE030B9A54. Return value 1.
MSI (s) (D8:AC) [17:09:52:937]: PROPERTY CHANGE: Adding WindowsFolder_x86_VC.AFA96EB4_FA9F_335C_A7CB_36079407553D property. Its value is 'C:\Windows\'.
Action start 17:09:52: WindowsFolder_x86_VC.AFA96EB4_FA9F_335C_A7CB_36079407553D.
MSI (s) (D8:AC) [17:09:52:937]: Doing action: SystemFolder_x86_VC.AFA96EB4_FA9F_335C_A7CB_36079407553D
Action ended 17:09:52: WindowsFolder_x86_VC.AFA96EB4_FA9F_335C_A7CB_36079407553D. Return value 1.
MSI (s) (D8:AC) [17:09:52:938]: PROPERTY CHANGE: Adding SystemFolder_x86_VC.AFA96EB4_FA9F_335C_A7CB_36079407553D property. Its value is 'C:\Windows\SysWOW64\'.
Action start 17:09:52: SystemFolder_x86_VC.AFA96EB4_FA9F_335C_A7CB_36079407553D.
MSI (s) (D8:AC) [17:09:52:938]: Doing action: ISSetupFilesExtract
Action ended 17:09:52: SystemFolder_x86_VC.AFA96EB4_FA9F_335C_A7CB_36079407553D. Return value 1.
MSI (s) (D8:70) [17:09:54:074]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI17B2.tmp, Entrypoint: SFStartupEx
MSI (s) (D8:E8) [17:09:54:075]: Generating random cookie.
MSI (s) (D8:E8) [17:09:54:077]: Created Custom Action Server with PID 8648 (0x21C8).
MSI (s) (D8:A8) [17:09:54:108]: Running as a service.
MSI (s) (D8:A8) [17:09:54:109]: Hello, I'm your 32bit Impersonated custom action server.
Action start 17:09:52: ISSetupFilesExtract.
1: Starting to extract setup files
1: Getting SUPPORTDIR property :
1: Extracting SetupFiles to: C:\Users\lavdang\AppData\Local\Temp\{AC76BA86-7AD7-1033-7B44-AB0000000001}
1: Getting ISSetupFile table view
1: Executing ISSetupFile table view
1: Extracting Setup File:
1: C:\Users\lavdang\AppData\Local\Temp\{AC76BA86-7AD7-1033-7B44-AB0000000001}\FixTransforms. exe
MSI (s) (D8!64) [17:09:54:183]: PROPERTY CHANGE: Adding SUPPORTDIR property. Its value is 'C:\Users\lavdang\AppData\Local\Temp\{AC76BA86-7AD7-1033-7B44-AB0000000001}'.
MSI (s) (D8!64) [17:09:54:183]: PROPERTY CHANGE: Adding ISSETUPFILESCOMPLETED property. Its value is 'Completed'.
1: Setting SUPPORTDIR property to: C:\Users\lavdang\AppData\Local\Temp\{AC76BA86-7AD7-1033-7B44-AB0000000001}
1: Setting ISSETUPFILESCOMPLETED property
MSI (s) (D8:AC) [17:09:54:184]: Doing action: AppSearch
Action ended 17:09:54: ISSetupFilesExtract. Return value 1.
Action start 17:09:54: AppSearch.
MSI (s) (D8:AC) [17:09:54:184]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\Acrobat.exe 3: 2
MSI (s) (D8:AC) [17:09:54:186]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Adobe\Acrobat Reader\11.0\Installer 3: 2
MSI (s) (D8:AC) [17:09:54:186]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Adobe\Acrobat Reader\6.0\InstallPath 3: 2
MSI (s) (D8:AC) [17:09:54:186]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\Software\Adobe\Acrobat Reader\11.0\Installer\Optimization 3: 2
MSI (s) (D8:AC) [17:09:54:186]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\Software\Adobe\Repair\Acrobat Reader 3: 2
MSI (s) (D8:AC) [17:09:54:186]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\Software\Adobe\Acrobat Reader\11.0\Installer\Optimization 3: 2
MSI (s) (D8:AC) [17:09:54:187]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Adobe\Acrobat Reader\7.0\InstallPath 3: 2
MSI (s) (D8:AC) [17:09:54:187]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Adobe\Adobe Acrobat\11.0\InstallPath 3: 2
MSI (s) (D8:AC) [17:09:54:187]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Adobe\Acrobat Reader\8.0\Installer 3: 2
MSI (s) (D8:AC) [17:09:54:187]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\AcroRd32.exe 3: 2
MSI (s) (D8:AC) [17:09:54:187]: Doing action: SetOSSpecificProperties
Action ended 17:09:54: AppSearch. Return value 1.
MSI (s) (D8:6C) [17:09:54:212]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI1CA3.tmp, Entrypoint: SetOSSpecificProperties
MSI (s) (D8!9C) [17:09:54:227]: PROPERTY CHANGE: Adding WindowsSystemString property. Its value is '(Windows Vista 64-bit)'.
Action start 17:09:54: SetOSSpecificProperties.
MSI (s) (D8:AC) [17:09:54:228]: Doing action: LaunchConditions
Action ended 17:09:54: SetOSSpecificProperties. Return value 1.
Action start 17:09:54: LaunchConditions.
MSI (s) (D8:AC) [17:09:55:643]: Product: Adobe Reader XI (11.0.03) -- Adobe Reader XI (11.0.03) requires Internet Explorer 7.0 or greater. Please visit www.microsoft.com to upgrade Internet Explorer.
MSI (c) (C4:E0) [17:09:54:230]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
Adobe Reader XI (11.0.03) requires Internet Explorer 7.0 or greater. Please visit www.microsoft.com to upgrade Internet Explorer.
Action ended 17:09:55: LaunchConditions. Return value 3.
Action ended 17:09:55: INSTALL. Return value 3.
Property(S): Text = 0
Property(S): DiskPrompt = [1]
Property(S): Registration = No
Property(S): UpgradeCode = {A6EADE66-0000-0000-484E-7E8A45000000}
Property(S): WindowsSystemString = (Windows Vista 64-bit)
Property(S): ISSETUPFILESCOMPLETED = Completed
Property(S): VersionNT = 601
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): AppDataFolder = C:\Users\lavdang\AppData\Roaming\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FavoritesFolder = C:\Users\lavdang\Favorites\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): LocalAppDataFolder = C:\Users\lavdang\AppData\Local\
Property(S): MyPicturesFolder = C:\Users\lavdang\Pictures\
Property(S): PersonalFolder = C:\Users\lavdang\Documents\
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): SendToFolder = C:\Users\lavdang\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): System64Folder = C:\Windows\system32\
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): TempFolder = C:\Users\lavdang\AppData\Local\Temp\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): SUPPORTDIR = C:\Users\lavdang\AppData\Local\Temp\{AC76BA86-7AD7-1033-7B44-AB0000000001}
Property(S): ACTION = INSTALL
Property(S): VersionNT64 = 601
Property(S): UILevel = 3
Property(S): OriginalDatabase = C:\Windows\ccmcache\2p\AdbeRdr11000_en_US.msi
Property(S): DATABASE = C:\Windows\Installer\2a70f78.msi
Property(S): COMPANYNAME = SPEC Services, Inc.
Property(S): USERNAME = SPEC Services, Inc.
Property(S): MsiRunningElevated = 1
Property(S): AdminUser = 1
Property(S): RedirectedDllSupport = 2
Property(S): WindowsFolder_x86_VC.AFA96EB4_FA9F_335C_A7CB_36079407553D = C:\Windows\
Property(S): SystemFolder_x86_VC.AFA96EB4_FA9F_335C_A7CB_36079407553D = C:\Windows\SysWOW64\
Property(S): ALLUSERS = 1
Property(S): DirectoryTable100_x86.AFA96EB4_FA9F_335C_A7CB_36079407553D = DirectoryTable
Property(S): SystemFolder.21022.08.Microsoft_VC90_CRT_x86.RTM.0138F525_6C8A_333F_A105_14AE030B9A54 = C:\Windows\SysWOW64\
Property(S): Dummy_Microsoft_VC90_CRT_x86.0138F525_6C8A_333F_A105_14AE030B9A54 = 1
Property(S): Dummy_policy_9_0_Microsoft_VC90_CRT_x86.52105B6B_A3EF_3A90_882A_947B287C203A = 1
Property(S): MsiWin32AssemblySupport = 6.1.7601.17514
Property(S): MsiNetAssemblySupport = 4.0.30319.1
Property(S): Date = 6/5/2013
Property(S): Time = 17:09:55
Property(S): TTCSupport = 1
Property(S): ColorBits = 32
Property(S): TextInternalLeading = 3
Property(S): TextHeight = 16
Property(S): BorderSide = 1
Property(S): BorderTop = 1
Property(S): CaptionHeight = 19
Property(S): ScreenY = 768
Property(S): ScreenX = 1024
Property(S): SystemLanguageID = 1033
Property(S): ComputerName = SP8430
Property(S): AS_REPAIR_VERSION_LIST = A
Property(S): UserLanguageID = 1033
Property(S): ProductCode = {AC76BA86-7AD7-1033-7B44-AB0000000001}
Property(S): ApplicationUsers = AllUsers
Property(S): AgreeToLicense = No
Property(S): _IsMaintenance = Reinstall
Property(S): SetupType = Typical
Property(S): _IsSetupTypeMin = Typical
Property(S): ARPCONTACT = Customer Support
Property(S): ARPHELPLINK = http://www.adobe.com/support/main.html
Property(S): ARPREADME = Readme.htm
Property(S): ARPURLINFOABOUT = http://www.adobe.com
Property(S): ARPURLUPDATEINFO = http://www.adobe.com/products/acrobat/readstep.html
Property(S): DefaultUIFont = Tahoma8
Property(S): ErrorDialog = SetupError
Property(S): INSTALLLEVEL = 100
Property(S): ISSCRIPT_VERSION_MISSING = The InstallScript engine is missing from this machine. If available, please run ISScript.msi, or contact your support personnel for further assistance.
Property(S): Manufacturer = Adobe Systems Incorporated
Property(S): PIDTemplate = 12345<###-%%%%%%%>@@@@@
Property(S): ProductID = none
Property(S): ProductLanguage = 1033
Property(S): ProductName = Adobe Reader XI (11.0.03)
Property(S): ProductVersion = 11.0.03
Property(S): ProgressType0 = install
Property(S): ProgressType1 = Installing
Property(S): ProgressType2 = installed
Property(S): ProgressType3 = installs
Property(S): RebootYesNo = Yes
Property(S): ReinstallModeText = omus
Property(S): TRACKINGKEY = Software\Adobe\Acrobat Reader\7.0
Property(S): ARPPRODUCTICON = SC_Reader.ico
Property(S): Cancel = 0
Property(S): RadioGroup = 0
Property(S): TypicalText = 0
Property(S): ARPCOMMENTS =
Property(S): ERROR_MIN_OVER_BIG = Setup has detected that you already have a more functional product installed. Setup will now terminate.
Property(S): SecureCustomProperties = DEFAULT_VERB;ACTIONPROPERTY;ELEMENTS;RDRMIN;RDRBIG;RDRBIG_8X;RDRBIG_9X;RDRBIG_10X;UT_FRB; UT_FRS;UT_AT;UT_AP1;UT_AP2;UT_AS1;UT_AS2;UT_A3D;UT_6X;UT_7X;UT_MM61;UT_MM62;UT_MM63;UT_EB6 1;UT_EB62;UT_EB63;AS_OPTIMIZE_ENABLED;ACROBAT_APP_PATH;AS_HKCR_EXE;PDFSHELL_LOCALSERVER_CO MMAND;PDF_DEFAULTICON;PDF_PREVIEW_HANDERLER_DLL;PDF_PREVIEW_HANDERLER_HELPDIR;DISABLE_PDFO WNERSHIP_RESTORE;PDF_INPROCSERVER_VIEWERPS;READER_PATH;IS_CURRENT_PDFOWNER;SUPPRESSLANGSEL ECTION;MIN_SYSTEM;ACROBAT_11_INSTALLED;AS_INSTALLDIR;ARM_COLLECT;BLOCK_APP_TIMEOUT;BLOCK_E NTRYPOINT_LOGGING;UPDATE_MODE;UPDATE_UI_MODE;PDX_DEFAULT_PROGID;DEFAULT_PROGID;OWNERSHIP_S TATE;PDF_INTEGRATION;ENABLE_OPTIMIZATION;DEFAULT_PDF_PROGID;DEFAULT_CURVER_PROGID;PDF_ACRO BROKER_PATH;INSTALLMAJORVERSION;ARMED
Property(S): BrandName = Adobe Reader XI (11.0.03)
Property(S): ISVROOT_PORT_NO = 0
Property(S): UserSID = S-1-5-21-606747145-884357618-1801674531-3921
Property(S): IsMinIE_Message = requires Internet Explorer 7.0 or greater. Please visit www.microsoft.com to upgrade Internet Explorer.
Property(S): ISLANGFLAG = ENU
Property(S): FilesLabel = 0
Property(S): DisallowRunFromSource = 1
Property(S): AppsInUseSilentAbort = A process is running that cannot be shut down by Setup. Please either close all applications and run Setup again, or restart your computer and run Setup again.
Property(S): ENABLE_CACHE_FILES = YES
Property(S): OLE_VERB_OPEN = &Open,0,2
Property(S): REINSTALLMODE = omus
Property(S): Elevated = 1
Property(S): ENABLE_OPTIMIZATION = YES
Property(S): ERROR_DEFRAG_MSG = Optimizing performance ...
Property(S): ERROR_DEFRAG_ADTEMPLATE = Completed [1]% of process
Property(S): ERROR_CANNOT_OPTIMIZE_DISK = NOTE: Installation was successful. However, because your hard drive is fragmented, this application may not be able to launch as quickly as possible. To optimize performance, please defragment your hard drive and then repair this application under Add or Remove Programs in the Control Panel.
Property(S): EULA_ACCEPT = NO
Property(S): DISABLE_BROWSER_INTEGRATION = NO
Property(S): AcroIEHelper_Description = Adobe PDF Reader Link Helper
Property(S): ADMIN_INSTALL = YES
Property(S): AdminProperties = ADMIN_INSTALL
Property(S): REMOVE_PREVIOUS = YES
Property(S): SYNCHRONIZER = YES
Property(S): OpenWith = Open with Adobe Reader XI
Property(S): SetupCacheExport =
Property(S): LC_UNSUPPORTED_OS = This application cannot be installed on this operating system. Setup will now terminate. Please refer to the minimum system requirements at http://www.adobe.com/go/reader_system_reqs.
Property(S): ApplicationList = 0
Property(S): DEFAULT_ATTACHMENT_WHITELIST = version:1|.ade:3|.adp:3|.app:3|.arc:3|.arj:3|.asp:3|.bas:3|.bat:3|.bz:3|.bz2:3|.cab:3|.ch m:3|.class:3|.cmd:3|.com:3|.command:3|.cpl:3|.crt:3|.csh:3|.desktop:3|.dll:3|.exe:3|.fxp:3 |.gz:3|.hex:3|.hlp:3|.hqx:3|.hta:3|.inf:3|.ini:3|.ins:3|.isp:3|.its:3|.job:3|.js:3|.jse:3| .ksh:3|.lnk:3|.lzh:3|.mad:3|.maf:3|.mag:3|.mam:3|.maq:3|.mar:3|.mas:3|.mat:3|.mau:3|.mav:3 |.maw:3|.mda:3|.mdb:3|.mde:3|.mdt:3|.mdw:3|.mdz:3|.msc:3|.msi:3|.msp:3|.mst:3|.ocx:3|.ops: 3|.pcd:3|.pi:3|.pif:3|.prf:3|.prg:3|.pst:3|.rar:3|.reg:3|.scf:3|.scr:3|.sct:3|.sea:3|.shb: 3|.shs:3|.sit:3|.tar:3|.taz:3|.tgz:3|.tmp:3|.url:3|.vb:3|.vbe:3|.vbs:3|.vsmacros:3|.vss:3| .vst:3|.vsw:3|.webloc:3|.ws:3|.wsc:3|.wsf:3|.wsh:3|.z:3|.zip:3|.zlo:3|.zoo:3|.pdf:2|.fdf:2 |.jar:3|.pkg:3|.tool:3|.term:3
Property(S): EXEC_MENU_WHITELIST = Close|GeneralInfo|Quit|FirstPage|PrevPage|NextPage|LastPage|ActualSize|FitPage|FitWidth|F itHeight|SinglePage|OneColumn|TwoPages|TwoColumns|ZoomViewIn|ZoomViewOut|ShowHideBookmarks |ShowHideThumbnails|Print|GoToPage|ZoomTo|GeneralPrefs|SaveAs|FullScreenMode|OpenOrganizer |Scan|Web2PDF:OpnURL|AcroSendMail:SendMail|Spelling:Check Spelling|PageSetup|Find|FindSearch|GoBack|GoForward|FitVisible|ShowHideArticles|ShowHideF ileAttachment|ShowHideAnnotManager|ShowHideFields|ShowHideOptCont|ShowHideModelTree|ShowHi deSignatures|InsertPages|ExtractPages|ReplacePages|DeletePages|CropPages|RotatePages|AddFi leAttachment|FindCurrentBookmark|BookmarkShowLocation|GoBackDoc|GoForwardDoc|DocHelpUserGu ide|HelpReader|rolReadPage|HandMenuItem|ZoomDragMenuItem|CollectionPreview|CollectionHome| CollectionDetails|CollectionShowRoot|&Pages|Co&ntent|&Forms|Action &Wizard|Recognize &Text|P&rotection|&Sign && Certify|Doc&ument Processing|Print Pro&duction|Ja&vaScript|&Accessibility|Analy&ze|&Annotations|D&rawing Markups|Revie&w
Property(S): Browser_Integration = 2
Property(S): ARPNOREPAIR = 1
Property(S): ActionTextLabel = 0
Property(S): CurrentPdfOwner = 0
Property(S): ReadmeHtml = Readme.htm
Property(S): OprimizeError2 = 0
Property(S): KBDOCLINK_ERROR_INVDRIVE = http://kb2.adobe.com/cps/404/kb404946.html
Property(S): ReaderProcessPopup = 0
Property(S): BrandNameMajorVer = Adobe Reader XI
Property(S): DefragResetProgress = No
Property(S): PROGMSG_IIS_REMOVESITE = Removing web site at port %d
Property(S): PROGMSG_IIS_CREATEVROOT = Creating IIS virtual directory %s
Property(S): PROGMSG_IIS_CREATEVROOTS = Creating IIS virtual directories...
Property(S): PROGMSG_IIS_EXTRACTDONE = Extracted information for IIS virtual directories...
Property(S): PROGMSG_IIS_REMOVEVROOT = Removing IIS virtual directory %s
Property(S): PROGMSG_IIS_REMOVEVROOTS = Removing IIS virtual directories...
Property(S): PROGMSG_IIS_ROLLBACKVROOTS = Rolling back virtual directory and web site changes...
Property(S): PROGMSG_IIS_EXTRACT = Extracting information for IIS virtual directories...
Property(S): IS_COMPLUS_PROGRESSTEXT_COST = Costing COM+ application: [1]
Property(S): IS_COMPLUS_PROGRESSTEXT_INSTALL = Installing COM+ application: [1]
Property(S): IS_COMPLUS_PROGRESSTEXT_UNINSTALL = Uninstalling COM+ application: [1]
Property(S): IS_SQLSERVER_AUTHENTICATION = 0
Property(S): IS_SQLSERVER_USERNAME = sa
Property(S): PDF_INTEGRATION = 1
Property(S): _5789b66a5ab8e = {AC76BA80-0011-7AD7-0000-000000000000}
Property(S): AttentionCloseReader = 0
Property(S): RunTimeProperties = CACHE_DIR;ProductName;OriginalDatabase;REMOVE;WindowsFolder;SetupCacheExport;ALLUSERS;REI NSTALLMODE;PLUG_INS;DefragResetProgress;ALLUSERS_APPDATA_ADOBE;DEFAULT_VERB;IS_CURRENT_PDF OWNER;ACTIVE_X;Installed;READER;ProductCode;UPDATE_MODE;INSTALLMAJORVERSION;VersionNT;Vers ionNT64;SystemFolder;PATCH
Property(S): ReaderDefaultProgramDesc = is the trusted standard for reliably viewing, printing, signing and commenting on PDF documents. It's the only PDF viewer that can open and interact with all types of PDF content - including forms and multimedia - and is available across leading desktop and mobile device platforms
Property(S): DV = 11.0
Property(S): MSIRESTARTMANAGERCONTROL = Disable
Property(S): IS_PROGMSG_XML_COSTING = Costing XML files...
Property(S): IS_PROGMSG_XML_CREATE_FILE = Creating XML file %s...
Property(S): IS_PROGMSG_XML_FILES = Performing XML file changes...
Property(S): IS_PROGMSG_XML_REMOVE_FILE = Removing XML file %s...
Property(S): IS_PROGMSG_XML_ROLLBACK_FILES = Rolling back XML file changes...
Property(S): IS_PROGMSG_XML_UPDATE_FILE = Updating XML file %s...
Property(S): PROGMSG_IIS_CREATEAPPPOOLS = Creating application Pools...
Property(S): PROGMSG_IIS_CREATEAPPPOOL = Creating application pool %s
Property(S): PROGMSG_IIS_CREATEWEBSERVICEEXTENSION = Creating web service extension
Property(S): PROGMSG_IIS_CREATEWEBSERVICEEXTENSIONS = Creating web service extensions...
Property(S): PROGMSG_IIS_REMOVEAPPPOOL = Removing application pool
Property(S): PROGMSG_IIS_REMOVEAPPPOOLS = Removing application pools...
Property(S): PROGMSG_IIS_REMOVEWEBSERVICEEXTENSION = Removing web service extension
Property(S): PROGMSG_IIS_REMOVEWEBSERVICEEXTENSIONS = Removing web service extensions...
Property(S): PROGMSG_IIS_ROLLBACKAPPPOOLS = Rolling back application pools...
Property(S): PROGMSG_IIS_ROLLBACKWEBSERVICEEXTENSIONS = Rolling back web service extensions...
Property(S): RestartManagerOption = CloseRestart
Property(S): DEFAULT_VERB = Read
Property(S): UPDATE_UI_MODE = 3
Property(S): BLOCK_APP_TIMEOUT = 120
Property(S): BLOCK_ENTRYPOINT_LOGGING = 0
Property(S): LC_UNSUPPORTED_OS_2 = Setup will now terminate. Please refer to the minimum system requirements at http://www.adobe.com/go/reader_system_reqs.
Property(S): LC_UNSUPPORTED_OS_1 = This application cannot be installed on this operating system
Property(S): AppsInUseUnknownAcrobatApps = Applications that are using Adobe Reader or Adobe Acrobat
Property(S): EmbdUI = 1
Property(S): ADOBE_LINK = http://www.adobe.com
Property(S): _WebLinkChecked = 0
Property(S): CurrentProduct = 0
Property(S): DWUSLINK = CEFB870FBECC80BF79AC97C8298C978FD9DCB78FCEDC5098CE8B974F99DBF0F8CEEC50A809AC
Property(S): LogonUser = Lavdang
Property(S): PROCESSPATHWITHID = %s with process ID: %d
Property(S): LANG_LIST = en_US,ca_ES,eu_ES,bg_BG,zh_CN,zh_TW,cs_CZ,da_DK,de_DE,es_ES,et_ET,fr_FR,hr_HR,hu_HU,it_IT ,ja_JP,ko_KR,lt_LT,lv_LV,nl_NL,nb_NO,pl_PL,pt_BR,ro_RO,ru_RU,sk_SK,sl_SI,fi_FI,sv_SE,tr_TR ,uk_UA
Property(S): PROGMSG_IIS_EXTRACTDONEz = Extracted information for IIS virtual directories...
Property(S): PROGMSG_IIS_EXTRACTzDONE = Extracted information for IIS virtual directories...
Property(S): UNKNOWNPROCESSWITHID = Unknown process with process ID: %d
Property(S): Square = 1
Property(S): SUPPRESSLANGSELECTION = 1
Property(S): ISReleaseFlags = ENU,READERBIG
Property(S): VirtualMemory = 39564
Property(S): PhysicalMemory = 12278
Property(S): Intel = 6
Property(S): Msix64 = 6
Property(S): Privileged = 1
Property(S): MsiAMD64 = 6
Property(S): ShellAdvtSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): GPTSupport = 1
Property(S): RecentFolder = C:\Users\lavdang\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): PrintHoodFolder = C:\Users\lavdang\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): NetHoodFolder = C:\Users\lavdang\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): RemoteAdminTS = 1
Property(S): MsiNTProductType = 1
Property(S): ServicePackLevelMinor = 0
Property(S): ServicePackLevel = 1
Property(S): WindowsBuild = 7601
Property(S): VersionMsi = 5.00
Property(S): MsiSystemRebootPending = 1
Property(S): VersionDatabase = 300
Property(S): CLIENTPROCESSID = 7364
Property(S): CLIENTUILEVEL = 2
Property(S): CURRENTDIRECTORY = C:\Users\lavdang
Property(S): IsAdminPackage = 1
Property(S): PackagecodeChanging = 1
Property(S): ProductState = -1
Property(S): PackageCode = {8017784A-94A5-40AD-AE48-D46040E2A00C}
Property(S): MsiLogFileLocation = D:\ReaderXI.log
MSI (s) (D8:AC) [17:09:55:668]: Note: 1: 1708
MSI (s) (D8:AC) [17:09:55:668]: Product: Adobe Reader XI (11.0.03) -- Installation operation failed.
MSI (s) (D8:AC) [17:09:55:669]: Windows Installer installed the product. Product Name: Adobe Reader XI (11.0.03). Product Version: 11.0.03. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1603.
MSI (s) (D8:AC) [17:09:55:671]: Deferring clean up of packages/files, if any exist
MSI (s) (D8:AC) [17:09:55:671]: MainEngineThread is returning 1603
MSI (s) (D8:90) [17:09:55:671]: Calling SRSetRestorePoint API. dwRestorePtType: 13, dwEventType: 103, llSequenceNumber: 230, szDescription: "".
MSI (s) (D8:90) [17:09:55:672]: The call to SRSetRestorePoint API succeeded. Returned status: 0.
=== Logging stopped: 6/5/2013 17:09:55 ===
MSI (s) (D8:90) [17:09:55:673]: User policy value 'DisableRollback' is 0
MSI (s) (D8:90) [17:09:55:673]: Machine policy value 'DisableRollback' is 0
MSI (s) (D8:90) [17:09:55:673]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D8:90) [17:09:55:673]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D8:90) [17:09:55:674]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D8:90) [17:09:55:674]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (D8:90) [17:09:55:674]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (D8:90) [17:09:55:674]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (D8:90) [17:09:55:674]: Restoring environment variables
MSI (s) (D8:90) [17:09:55:675]: Destroying RemoteAPI object.
MSI (s) (D8:E8) [17:09:55:675]: Custom Action Manager thread ending.
MSI (c) (C4:F0) [17:09:55:676]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (C4:F0) [17:09:55:676]: MainEngineThread is returning 1603
=== Verbose logging stopped: 6/5/2013 17:09:55 ===This thread is pretty old, are you still having this issue?
-
Unable to load DLL after Impersonating (0x80070542)
I have an application that prompts a user for credentials and impersonates the user before taking some action on that user's behalf. However, when I try to call some framework methods that require .NET to load a native DLL, the call fails with the
following error:
System.DllNotFoundException: Unable to load DLL 'secur32.dll': Either a required impersonation level was not provided, or the provided impersonation level is invalid. (Exception from HRESULT: 0x80070542)
I've simplified the duplication scenario down to the following:
this.userToken = IntPtr.Zero;
bool authenticated =
Win32.LogonUser(
username,
domain,
password,
LogonTypes.Network,
LogonProviders.Default,
out userToken);
if (authenticated)
this.impersonationContext =
WindowsIdentity.Impersonate(this.userToken);
// This call blows up:
string userDomain = Environment.UserDomainName;
If I make a call to Environment.UserDomainName before impersonating, no exception is thrown (presumably the DLL is loaded before impersonation, so no attempt is made afterwards).Hi Travis,
I'm writing to check the issue status, please feel free to let us know if you have any concern.
Sincerely,
Eric
MSDN Subscriber Support in Forum
If you have any feedback of our support, please contact
[email protected]
Please remember to mark the replies as answers if they help and unmark them if they provide no help.
Welcome to the All-In-One Code Framework! If you have any feedback, please tell us. -
Issue with OSI PI WCF Web Service with wshttpbinding
Hi Experts,
System Details:
SAP MII 14 SP4
OSI PI Web Service: PITimeSeries
I am having issue when trying to call OSI PI web service using http post. it is returning status 0 when i am using exception handler in BLS.
Same web service works fine with basichttpbinding (SOAP 1.1) but with wshttpbinding (SOAP 1.2) it is giving error.
Following are Web config binding details for web service.
<wsHttpBinding>
<binding name="wsBinding_2011" sendTimeout="00:01:00" receiveTimeout="00:10:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false">
<reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" />
<security mode="Message">
<message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true" />
</security>
</binding>
</wsHttpBinding>
I am not sure it could be the issue with passing windows credentials.
Did anybody consumed WCF web service with wshttpbinding with security mode as Message and clientCredentialType as Windows.
Also i was trying to pass MYSAPSSO2 SSO token to service in http post but first i am not sure if this is correct windows token and second which header property of service should be mapped and i am not sure that I am going into correct direction or not.
Please let me know what i am missing.
I have tried following other options and tools:
SOAP UI: basichttpbinding works fine for wshttpbinding receiving Internal Server error in log and Response as
The security context token is expired or is not valid.
MII Web Service Action Block: basichttpbinding works fine for wshttpbinding not able to configure url through wizard because as per my discussion with other MII experts MII does not support SOAP1.2. that is one reason for using http post.
WCF Storm: both bindings works fine (There is option to select windows authentication and Impersonation level as delegation)
WCF Test Client: Both bindings works fine
Any help is appreciated.
Thanks & Regards,
Manoj BilthareHi Sam,
The web service is valid following are details of testing on various tools.
SOAP UI: basichttpbinding works fine for wshttpbinding receiving Internal Server error in log and Response as The security context token is expired or is not valid.
MII Web Service Action Block: basichttpbinding works fine for wshttpbinding not able to configure url through wizard because as per my discussion with other MII experts MII does not support SOAP1.2. that is one reason for using http post.
WCF Storm: both bindings works fine (There is option to select windows authentication and Impersonation level as delegation)
WCF Test Client: Both bindings works fine
Please let me know if additional details required.
Thanks & Regards,
Manoj Bilthare -
Crystal Reports Visual Studio 2010 SP2 Fixed issues
Hi All,
Here is the list with fixed issues in Crystal Reports Visual Studio 2010 SP2
http://www.crystaladvice.com/crystalreports/crystal-reports-2010-sp2
The following list with issues is fixed:
1566763 - CRVS2010 WPF Viewer error; "System.NullReferenceException was unhandled" PageControl.OnMouseMove
1540637 - Error: External component has thrown an exception. Launching the Database Expert in the embedded Crystal Reports designer in Visual Studio
1544675 - Error; 'Object reference not set to an instance of an object' when using the CR WPF viewer in VS2010
1578823 - CRVS2010; "Load Report Failed" error when Report is open in any full version of the CR Designer
1638191 - Using RTL language (Arabic) the CR viewer Group Tree Panel does not display RTL
1631283 - Error; 'Failed to load database information' when reporting off of file system data
1553469 - How to enable Database logging in Crystal Reports for Visual Studio 2010
1299185 - Error: Operation not yet implemented or Failed to Export, when exporting a Crystal Reports to Text format
1451960 - Null or empty values are not surrounded with delimiter when exported to CSV format
1659185 - The special Crystal Reports field, 'File Name and Path' shows temp path and temp name when viewing a report
1452648 - Dynamic Cascading Parameter prompts two times when using the Crystal Reports in VS .NET
1580338 - When refreshing a report that contains a linked subreport report takes long time to execute
1659111 - GCHandle left in memory for each open and close of a Crystal Report in VS2010 application
1356672 - Crystal Reports special field "File Path and Name" displays incorrect information in a Visual Studio .NET application
1593658 - Impersonation of database Log On credentials failure in report generation when set at runtime in a .NET application
1661239 - Summary fields are converted to String fields
1661276 - Using the Crystal Reports SetTableLocation method in VS .NET causes long report processing delays
1661200 - Not able to copy text from report objects using the Crystal Reports WinForm viewer for VS .NET
1631722 - Date function in a Selection Formula is removed when running a report in a VS .NET application
1525822 - Exception "Object reference not set to an instance of an object." thrown when clicking on Parameter Panel button in Crystal Report .NET Windows Form Viewer
1603082 - Cross-tab background colors not retained when exporting a report to PDF format
1603154 - Shared variable display the incorrect value in Crystal Reports
1427747 - Why does a CR .NET SDK web app have problems running on IIS 7 in integrated pipeline mode?
1545536 - Alignment set to Justify causes broken underline
Source: Resolved Issues in Service Pack 2 for Crystal Reports for Visual Studio 2010
With kind regards,
Pieter Jong
Crystal Advice
http://www.crystaladvice.comMany thanks for the link Pieter.
I recently created a wiki that lists all of the fixes, their tracking numbers, associated Kbase numbers, Kbase titles and links to the kbases:
http://wiki.sdn.sap.com/wiki/x/tgK3Dw
It's 90% complete. I think I have a few Kbases to do to complete it.
Now that I think about it, I'll also add the link to the [sticky thread|SP 2 for Crystal Reports for Visual Studio 2010 released!; re. SP2 release.
- Ludek -
Verizon Customer Service - Impersonal, scripted, unhelpful.
This email correspondence began because this is the 2nd time in 4 years that my service as degraded at my house for some unknown reason and in both cases, Verizon has been unwilling to do anything to help resolve that situation. I had good coverage in both of these locations initially but then something happened on Verizon's end that degraded the service. This is my attempt at getting some kind of resolution.
I'm not sure of this but in my current location, 4g service seems to be just fine but I have a 3g phone and have no need to upgrade to 4g and I don't want to be forced to have to upgrade two handsets just because the 3g service is degraded. Could this be on purpose? According to Verizon 3g and 4g should be the same.
By the way, my repeated request for escalation to upper management was ignored.
In any case, I'm posting this so others can see that VZW is a mail order phone company that has no personal interest in customer communication. Customer service is entirely script driven as you will see by the over use of "I'm delighted to help you" "I'm deeply sorry for...". This is not at all sincere as VZW was delighted to close the call without a resolution and happy for me to take a survey because they are "always looking to provide a better experience for our customers".
Perhaps other carriers are just as bad, but after 4 years of being treated like the lucky person who gets to use VZW, I'm going to find out first hand by moving to another carrier in July when my contract expires.
I'm sure some will see this as simply an unreasonable customer demand being handled by skilled customer service reps... until you call with a legitimate complaint. Then you will understand.
My original message Sent: Sun Feb 12 03:41:19 MST 2012:
Message Body: Please forward this email to someone in upper management. I have been a customer for 4yrs and have been paying nearly $200/mo for phone coverage and have HAD to upgrade my phones several times in order to try to get better service. Since 2010 I have had very poor phone performance and had to buy a network extender (non 3g) in August of 2010 just to receive phone calls in an area that was supposed to have good coverage. I found out only 2months later a 3g version of the network extender had been released. I was told there was NO 3g network extender when I purchased the one I did. I can't imagine no one at Verizon knew this. Last year, I have moved to another location and finally freed myself of the Network Extender until about 4 months ago when the service began to degrade. I was told by CSR I 'should' have good connectivity. The service has become so poor now that I often see missed calls, and voice mails when the phone never rang. I drug out the old network extender just to be able to receive calls again and I found I can no longer receive MMS texts. After calling CS I found it's because it is not 3g and was advised to upgrade to a 4G phone. My wifes' contract ends in July 2012 and mine has already expired.
I'm growing weary of this dance with Upgrade-degraded service service loop. My phones are 3G. I am happy with the performance when I can get coverage. I work from home and use my phone often from home. PLEASE, don't make me pay for another network extender. Send me a 3G network extender so I can use my phones. I have been a faithful customer for 4 years and all 3 of my kids are also customers. We want to stay with VZW but am forced to look for alternate Solutions. I have friends that come over to my house and show me their AT&T 3g Iphones with full coverage. It's very tempting to switch.
PLEASE RESPOND BY EMAIL because of lack of coverage.
VZW Response On 02/14/12 12:28 - 2 days later:
(Things to notice: Non-personal, scripted response that completely ignores the clear message that I no longer am willing to upgrade.)
Good afternoon David,
My name is Ariel and I am sorry to hear about the issues you have been experiencing with your service. I will be more than happy to assist you with forwarded your email to management today. I have forwarded your email to management. I also recommend contacting our Technical Support team at 800-922-0204 so we can do troubleshooting in your area
and to make sure the Network Extender will fix this issue. We may be able to fix the service in the area if it worked before.
I am delighted to inform you that your line ending in -xxxx is eligible to receive promotional pricing on a new wireless device. When participating in our Equipment Upgrade Program, the discounted price is contingent upon you accepting a two year Customer Agreement. To view your promotional pricing and to process your order, please sign
in to "My Verizon" on www.verizonwireless.com using your Account Owner Number and password. Next, click on the "Upgrade" icon located under "Device" in the "I Want To" section at the bottom of your home page and follow the instructions provided.
You also have the following options to process your order:
1. Complete the upgrade process by visiting a local Verizon Wireless store. To obtain a list of stores in your area, please click on the following link, which will direct you to the "Store Locator" page of our website:
www.verizonwireless.com/storelocator
2. Call Customer Service at 800-922-0204 or by dialing *611 (Send) airtime free from your wireless device. Regular delivery time is three to five days.
3. Call me directly at xxx-xxx-xxxx ext xxxx and I can get your new phones sent out with overnight shipping for free!
Based on your equipment history, I recommend that you upgrade this line to the Motorola DROID 3 for $149.99 (after $50 New Every Two). The retail price of this phone is $459.99, however; due to your loyalty and additional discounts, you will save $260 on this device! The NE2 and Annual Upgrade programs have been retired since the
beginning of 2011. You will not be eligible for these programs after you upgrade.
I also wanted to let you know that I performed a quick analysis of your account and I found you have the best calling plan and features for your wireless needs.
If you would like to perform an analysis of your account, you may go to www.verizonwireless.com and log into the "My Verizon" account attached to the account owner. After you have successfully logged in, you may select "More Actions" link under the "I Want To..." section of the homepage. The "Run Account Analysis" option will be under "Plan."
David, I appreciate you allowing me to assist you with forwarding your email. Again, I recommend also contacting Technical Support to ensure the Network Extender is the correct path. Feel free to reply to this email if you have any other questions or concerns regarding your account. Thank you for your time and for being a part of the Verizon
Wireless family since 2008.
Have a great day!
Sincerely,
Ariel
Verizon Wireless, Customer Service
Internet Response Team
My Response Tue Feb 14 13:48:18 MST 2012:
Ariel,
I did contact technical support which is why I opened this email correspondence. They did the same thing, recommending I pay more money in hopes of finally getting decent service. If you were me, you would understand why that is not only the wrong path but insulting. How many years of buying new equipment while still receiving consistently poor service would should I endure? It's been 2 years already. Giving another several hundred dollars for another set of device upgrades as I have already been doing? No. I think it's time VZW gave me $150/mo worth of good service first. Look at my usage on both phone and it's clear VZW is benefiting and I'm not. My phones are nothing more then cordless extensions with wifi. Texting is intermittent, MMS only works if I turn off the wifi, stand in the right corner of the room, get the text after many retries and then turn the wifi back on, data is wifi only. We can hardly use our 3G phones at home where we spend the majority of our time since we both work from home. I will be seriously considering an alternate carrier if this continues until July. You have my address, you can check if there is a 3G coverage problem in my area. If there is (or isn't) then VZW can provide the appropriate devices/solution as a customer service. I'm tired of paying to test faulty equipment.
Very frustrated,
David Ford
VZW Response On 02/16/12 16:19 - 2 days later:
(Things to notice: Different CSR, ignores email about trying to call because I'm not receiving phone calls reliably, wants me to call and "discuss". In other words, as you will see later, WE ARE NOT GOING TO GIVE YOU ANYTHING.)
Hello David ,
My name is Clyde. I was sorry to learn of all the issues that you are having with your service. I can definitely assist you with your concern. Please call me at xxx-xxx--xxxx ext. xxxx, and I will be glad to go over your options. I will provide additional information below in this email.
I attempted to reach you on 02/16/2012, and did leave a message. I was able to see that you form your previous emails, that you are interested in getting a free Network Extender. When you call me, we can discuss your options for the 3G Extender.
In closing, I was glad to give you my number, so that we can discuss your options for the 3G Network Extender from Verizon Wireless. It was a privilege to serve you! Should you have additional questions, please call me at xxx-xxx-xxxx ext.xxxx, or reply to this email. Thank you for choosing Verizon Wireless!
Respectfully,
Clyde
Verizon Wireless, Customer Service
Internet Response Team
My Response Thu Feb 16 19:09:01 MST 2012 :
Clyde,
I mentioned in my email to please correspond by email as I often miss calls. I can tell by your super positive response that you are going to offer me discounts against purchasing more equipment. I don't know if this is a Verizon programming thing, but discounts are not savings when you are forced to have to make a purchase. I'm only hope the government doesn't catch on to this. "What, you don't like paying 85% tax? You still save 15%!". Perhaps I can Verizon-speak my dilemma. In July my contract ends and I stop paying Verizon $152.00+ a month for service. Sooo... If you send me a 3G wireless extender and that solves my coverage problems, I'll continue to pay Verizon $152.00+ per month. Over one year that will be more the 7 TIMES THE VALUE OF THE ROUTER!!!! And the "savings" will continue on as long as I'm a happy customer. Isn't that a bargain?
I'm not meaning to be factious but offering me a discount is like a crappy restaurant offering coupons for a free meal to compensate for the crummy food and poor service.
Please, if FREE is on the table then I will gladly call you to discuss. Otherwise, hasta Julio (until July). Thanks for at least contacting me,
David
VZW Response 02/20/12 09:25 - 4 days later:
(Things to notice: 4 days later because of "higher then normal call volumes, yet it only took one day, see the end, to send a case closed email. No offer of any compensation or resolution apart from me having to upgrade and pay more money for a faulty service. More impersonal scripted response)
Hello David,
My name is Larry and I am sorry to learn about the service issues you have been experiencing. I am happy to address your request to receive a network extender. Please know, we are unable to guarantee service indoors and this is why the Network Extenders are not offered at no cost. We thank you for your understanding.
We appreciate your business and will be happy to offer further troubleshooting if you call. However, we are unable to offer a free Network Extender and apologize for any inconveniences this may cause.
The Verizon Wireless Network Extender enhances indoor voice and data coverage in areas with minimum or no in-building coverage, allowing customers to get the most of their plan minutes while indoors.
This indoor coverage solution operates with existing Verizon Wireless-branded devices and installation is simple - just "plug and play."
For additional information regarding Verizon Wireless Network Extender visit the following website:
Network Extender
Again, my name is Larry and I am sorry we are unable to offer the Network Extender at no cost.
Because my reply was not prompt, I would like to apologize for the delayed response to your email as we have been receiving a higher than normal rate of email inquiries. We appreciate your business and would like to thank you for helping to make Verizon Wireless the most reliable network in America.
Did you know, most of your questions can be answered with out calling or emailing? Simply visit www.verizonwireless.com/support any time, day or night!
Sincerely,
Larry
Verizon Wireless
Internet Response Team
My Response 02/20/12 15:03:
Ok, well. It looks like I will be canceling my service in July and moving to a better carrier that cares for it's customers. Please forward this email to management as I asked in the beginning for further review.
VZW Response 02/21/12 14:26 - 1 day later:
(Things to notice: Only 1 day response, case closed. No resolution. No concern for losing a customer to due faulty service. Impersonal scripted response.)
Dear Verizon Wireless Customer,
Thank you for your recent inquiry on verizonwireless.com. We are always looking to provide a better experience for our customers, so your opinion is important to us. Please take just a moment to give us your thoughts about your experience.
Just click on the link below to take a quick 3-question survey.
It is part of our commitment to making your wireless experience the best that it can be.
Sincerely,
Verizon Wireless
>Edited internal VZW phone numbers and extensions<
Message was edited by: Verizon AdministratorDavid, Don't give up. That's what they want by giving you and everyone else who has legitimate complaints the run around.
Send the FCC a complaint. You will get a response. I did after 5 months of getting the **. Please pass this along to everyone, that the FCC responds. They will log the complaint with Verizon and then you can followup with a confirmation number. It took approx. 30 days to receive a letter from Verizon. A few weeks later my issue was resolved.
I think it's time to gather enough willing customers to file a class action lawsuit. It is unfortunate that corporations won't take responsibility with customer complaints/issues unless they are threatened with a lawsuit. We need to hold businesses and their employees accountable. WWW.esupport.fcc.gov/ccmsforms 888-225-5322 email [email protected] -
Hi,
I am new to using EWS managed APIs.
Following is the issue:
1. I am using a service account e.g. [email protected]. This user is a global administrator and also has ApplicationImpersonation role assigned. (Sign into Online Office 365 account -> Admin -> select "Exchange" tab- > select Permissions
on the left panel -> create an impersonation role -> assign ApplicationImpersonation in Roles: and [email protected] in Members: -> Click on save)
2. Create a calendar item by other user for e.g. [email protected], and invite an attendee - [email protected].
3. In a c# program, I connect to EWS service using a service account - [email protected], fetch its calendar events. If organizer of an event is some other user - [email protected] then
I use impersonation in the following way to update the calendar event/item properties- subject, body text etc.
private static void Impersonate(string organizer)
string impersonatedUserSMTPAddress = organizer;
ImpersonatedUserId impersonatedUserId =
new ImpersonatedUserId(ConnectingIdType.SmtpAddress, impersonatedUserSMTPAddress);
service.ImpersonatedUserId = impersonatedUserId;
4. It was working fine till yesterday afternoon. Suddenly, it started throwing an exception "Access is denied. Check credentials and try again." Whenever I try to
update that event.
private static void FindAndUpdate(ExchangeService service)
CalendarView cv = new CalendarView(DateTime.Now, DateTime.Now.AddDays(30));
cv.MaxItemsReturned = 25;
try
FindItemsResults<Item> masterResults = service.FindItems(WellKnownFolderName.Calendar, cv);
foreach (Appointment item in masterResults.Items)
if (item is Appointment)
Appointment masterItem = item as Appointment;
if (!masterRecurEventIDs.Contains(masterItem.ICalUid.ToString()))
masterItem.Load();
if (!masterItem.Subject.Contains(" (Updated content)"))
//impersonate organizer to update and save for further use
Impersonate(masterItem.Organizer.Address.ToString());
// Update the subject and body
masterItem.Subject = masterItem.Subject + " (Updated content)";
string currentBodyType = masterItem.Body.BodyType.ToString();
masterItem.Body = masterItem.Body.Text + "\nUpdated Body Info:
xxxxxxxxxxxx";
// This results in an UpdateItem operation call to EWS.
masterItem.Update(ConflictResolutionMode.AutoResolve);
// Send updated notification to organizer of an appointment
CreateAndSendEmail(masterItem.Organizer.Address.ToString(), masterItem.Subject);
masterRecurEventIDs.Add(masterItem.ICalUid.ToString());
else
Console.WriteLine("Event is already updated. No need to update again.:\r\n");
Console.WriteLine("Subject: " + masterItem.Subject);
Console.WriteLine("Description: " + masterItem.Body.Text);
catch (Exception ex)
Console.WriteLine("Error: " + ex.Message);
5. What could be an issue here? Initially I thought may be its a throttling policy which is stopping same user after making certain API call limits for the day, but I am still seeing this issue today.
Any help is appreciated.
ThanksYour logic doesn't sound correct here eg
2. Create a calendar item by other user for e.g. [email protected], and invite an attendee - [email protected]
3. In a c# program, I connect to EWS service using a service account - [email protected], fetch its calendar events. If organizer of an event is some other user - [email protected] then
I use impersonation in the following way to update the calendar event/item properties- subject, body text etc.
When your connecting to [email protected] mailbox the only user that can make changes to items within
abccalendar is abc (or ABC's delegates). If your impersonating the Organizer of the appointment pqr that wouldn't work unless the organizer had rights to abc's calendar. If you want to make updates to a calendar
appointment like that you should connect to the Organizers mailbox first update the original, send updates and then accept the updates.
When you impersonate your impersonating the security context of the Mailbox your impersonating so its the same a logging on as that user in OWA or Outlook.
Cheers
Glen -
Hi All,
I am facing an issue with SP2013 Custom Workflow developed using Visual Studio 2012.
Objective of the Custom workflow: User fills the form and submit, list get updated and workflow will initiate and go for the process.
Issue: After the deployment of WF, for first time when user is filling the form and submit, list is getting updated. But the Workflow Goes to "Suspend" mode. (
This Custom Workflow has a configuration file where we are providing other details including ID of Impersonator (farm is running under Claim Based Authentication).
Work flow works fine once when the Impersonator initiate the workflow (Fill the form and submit for approval) and everything works fine after that.
Following steps are already performed
1.Make sure User profile synchronization is started.
2.Make sure the user is not the SharePoint system user.
3.Make sure the user by whom you are logged is available in User Profile list.
4.Step full synchronization of User Profile Application.
From the ULS logs it seems the user's security token from the STS service and User profile service is not being issued.
Appreciate any thoughts or solution.
Following are the log files.
<-------------------------------Information taken from "http://YYYY.XXXXX.com/sites/xxxx/_layouts/15/wrkstat.aspx" where it is showing workflow status as "Suspend"------->
http://yyyy.XXXX.com/sites/xxxx/_vti_bin/client.svc/sp.utilities.utility.ResolvePrincipalInCurrentcontext(input=@ParamUser,scopes='15',sources='15',inputIsEmailOnly='false',addToUserInfoList='False')?%40ParamUser='i%3A0%23.w%7CXXXXX%5Csps_biscomdev'
Correlation Id: f5bd8793-a53c-2127-bfb1-70bc172425e8 Instance Id: 14a985a0-60c8-42db-a42c-c752190b8106
RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401
{"error_description":"The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug>
configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} {"x-ms-diagnostics":["3001000;reason=\"There
has been an error authenticating the request.\";category=\"invalid_client\""],"SPRequestGuid":["f5bd8793-a53c-2127-8654-672758a68234"],"request-id":["f5bd8793-a53c-2127-8654-672758a68234"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["34"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["Bearer
realm=\"b14e1e0f-257f-42ec-a92d-377479e0ec8d\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]79e0ec8d\"","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Fri, 10 Apr 2015 19:48:07 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
<----------------------------------------------------------------------------------------------------------------------------------------->
<-----------------------ULS Log--------------------------------------------------------------------------------------------------------->
04/16/2015 15:49:10.51 OWSTIMER.EXE (0x3B3C) 0x39A4 SharePoint Server Search Administration aij4q Medium SystemMetricsTraceAggregator error getting next value System.ComponentModel.Win32Exception (0x80004005): Unknown error
(0xc0000bc6) at Microsoft.Office.Server.Search.Performance.Pdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError) at Microsoft.Office.Server.Search.Performance.PerformanceCounter.NextValue(Int32 retry,
Int32 retryInterval, Boolean initialize) at Microsoft.Office.Server.Search.Monitoring.SystemMetricsTraceAggregator.Flush(ILoggingProvider persist) 3f5ffd9c-1ea7-d0c8-efd5-08730af690a1
04/16/2015 15:49:10.95 w3wp.exe (0x1C74) 0x20CC SharePoint Server Workflow Services aj526 Medium WorkflowMessagingClient is using MSMQ 3f5ffd9c-fec7-d0c8-efd5-089b983d7c28
04/16/2015 15:49:14.11 w3wp.exe (0x1C74) 0x1E74 SharePoint Portal Server User Profiles aj2aw High [Forced due to logging gap, Original Level: Verbose] GetPartitionPropertiesCache :: ApplicationId = {0} 405ffd9c-ae9d-d0c8-efd5-045b09583aac
04/16/2015 15:49:15.43 w3wp.exe (0x0C48) 0x2AA4 SharePoint Portal Server User Profiles ae0s1 High Identity claims mapped to '0' user profiles. Claims: [nameid: '', nii: 'windows', upn: '', smtp: '', sip: ''], User Profiles: f5bd8793-a53c-2127-a845-3695a6bf9678
04/16/2015 15:49:15.45 w3wp.exe (0x0C48) 0x2AA4 SharePoint Portal Server User Profiles ae0sr Unexpected UserProfileException caught.. Exception Microsoft.Office.Server.Security.UserProfileNoUserFoundException: 3001002;reason=The
incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() is thrown. f5bd8793-a53c-2127-a845-3695a6bf9678
04/16/2015 15:49:15.45 w3wp.exe (0x0C48) 0x2AA4 SharePoint Portal Server User Profiles ae0su High The set of claims could not be mapped to a single user identity. Exception 3001002;reason=The incoming identity is not mapped
to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. has occured. f5bd8793-a53c-2127-a845-3695a6bf9678
04/16/2015 15:49:15.46 w3wp.exe (0x1C74) 0x1E74 SharePoint Server Search Query dn4s High FetchDataFromURL start at(outside if): 1 param: start 405ffd9c-ae9d-d0c8-efd5-045b09583aac
04/16/2015 15:49:15.56 w3wp.exe (0x0C48) 0x0518 SharePoint Portal Server User Profiles ae0s1 High Identity claims mapped to '0' user profiles. Claims: [nameid: '', nii: 'windows', upn: '', smtp: '', sip: ''], User
Profiles: f5bd8793-a53c-2127-94b8-bfec2dd819f1
04/16/2015 15:49:15.56 w3wp.exe (0x0C48) 0x0518 SharePoint Portal Server User
Profiles ae0sr Unexpected UserProfileException caught.. Exception Microsoft.Office.Server.Security.UserProfileNoUserFoundException: 3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible
cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager upManager,
IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() is thrown. f5bd8793-a53c-2127-94b8-bfec2dd819f1
04/16/2015 15:49:15.56 w3wp.exe (0x0C48) 0x0518 SharePoint Portal Server User Profiles ae0su High The set of claims could not be mapped to a single user identity. Exception 3001002;reason=The incoming identity is not mapped
to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. has occured. f5bd8793-a53c-2127-94b8-bfec2dd819f1
04/16/2015 15:49:17.68 w3wp.exe (0x1C74) 0x1AB8 SharePoint Server Search Query dn4s High FetchDataFromURL start at(outside if): 1 param: start 415ffd9c-fe81-d0c8-efd5-069f50839f81
04/16/2015 15:49:18.05 w3wp.exe (0x1C74) 0x2554 SharePoint Server Search Query dn4s High FetchDataFromURL start at(outside if): 1 param: start 415ffd9c-7e98-d0c8-efd5-036cbbbe1377
04/16/2015 15:49:19.99 w3wp.exe (0x1C74) 0x3BBC SharePoint Server Search Query dn4s High FetchDataFromURL start at(outside if): 1 param: start 425ffd9c-8e0d-d0c8-efd5-0dc40744b558
Regards
SaktiI have the same problem, so i resolve it like :
1. The user that launch the Workflow instance, is not exist in the profile DataBase.
2. Connect with this user.
3. Navigate to Profile Site of this user.
4. Retry to retake to instance.
5. You can also verify the Debug table of Workflow Databases, its contains all log errors -
SSO + OBIEE + Impersonation :: Invalid user/password
I am running the following setup:
OBIEE
Oracle Business Intelligence Product Version 10.1.3.3.2 (Build 071217.1900)
Physical Presentation Catalog Path /apps/installs/OracleBIData/web/catalog/paint/root
Oracle BI Server Data Source AnalyticsWeb
Analytics WebApp
Turned off OC4J, and deployed Analytics.war file on its own Apache-Tomcat instance
The Tomcat instance listens on port 9090
Siteminder (SSO) / Proxy Tier
I am running an Apache Web Server instance protected by CA Siteminder's SSO policy
AWS is listening on port 80, and acting as a proxy to redirect requests for Analytics.
Example:
Tomcat Analytics: http://localhost:9090/analytics/
AWS: http://localhost:80/obiee/ ==> http://localhost:9090/analytics/
I am doing testing with the out of the box PAIN repository & set of dashboards. My goal is to:
1. Protect OBIEE behind SSO
2. Allow ANY SSO authenticated user to gain access to OBIEE Analytics
3. Remove OBIEE's own authentication / login screen
Effectively:
1. Browse to http://localhost/obiee/
2. Get redirected to SSO login landing page
3. Authenticate via SSO
4. Upon successful SSO authentication, get redirected to the default OBIEE dashboard
So far, so good. I followed the guide for SSO integration found here: http://download.oracle.com/docs/cd/E12096_01/books/AnyDeploy/AnyDeploySSO.html
I've added the necessary entries on my instanceconfig.xml ($ORACLEBIDATA_HOME/web/config/instanceconfig.xml) as follows
<Auth>
<SSO enabled="true">
<ParamList>
<Param name="IMPERSONATE" source="httpHeader" nameInSource="eid"/>
</ParamList>
</SSO>
</Auth>
<CredentialStore>
<CredentialStorage type="file" path="/apps/installs/OracleBIData/web/config/credentialstore.xml" passphrase="***********"/>
</CredentialStore>
I've created an Impersonator user and impersonation alias on my credentialstore.xml file using:
cryptotools credstore -add -infile $ORACLEBIDATA_HOME/web/config/credentialstore.xml
Credential Alias: impersonation
Username: Impersonator
Password: ***********
Do you want to encrypt the password? y/n (y):
Passphrase for encryption: ***********
Do you want to write the passphrase to the xml? y/n (n):
File "<OracleBIData>/web/config/credentialstore.xml" exists. Do you want tooverwrite it? y/n (y):
I've also added the Impersonator user to the repository using BI Administrator. I opened the respository online and added Impersonator as a user, with the same password I defined when I user cryptotools. I included the Impersonator user on the same groups as the default Administrator (Administrators & XMLP_ADMIN) and subsequently checked my changes back into the server. After everything was done, I bounced presentation and BI servers through:
$run-sa.sh stop
$run-saw.sh stop
$run-sa.sh start
$run-saw.sh start
Presentation services starts up fine, BI server starts up fine as well. When I browse to the Apache Web Server site, I get redirected to SSO, I pass my credentials, and the wind up on the /saw.dll?Dashboard URI but I get the following message:
You are not currently logged in to the Oracle BI Server.
If you have already logged in, your connection might have timed out, or a communications or server error may have occurred.
Here are the relevant log entries from $ORACLEBIDATA_HOME/web/log
sawlog0.log -I replaced the actual username with <SSOUID>. <SSOUID> is the actual SSO header I need.
Oracle BI Presentation Services have started successfully.
Type: Error
Severity: 40
Time: Fri Jul 23 12:02:57 2010
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
Properties: ConnId-1,1;ThreadID-4096981904
Location:
saw.odbc.connection.open
saw.connectionPool.getConnection
saw.threadPool
saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for <SSOUID> in repository Star: invalid user/password. (08004)
Type: Error
Severity: 42
Time: Fri Jul 23 12:02:57 2010
File: project/webconnect/connection.cpp Line: 276
Properties: ThreadID-4096981904
Location:
saw.connectionPool.getConnection
saw.threadPool
saw.threads
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
I am at a total loss with this. If I am understanding the OBIEE stack correctly, this would seem to indicate:
a. The impersonation credentials on the credentialstore.xml file are not being decrypted correctly, or the password actually doesn't match. But I've triple checked this.
b. The impersonation alias is not being recognized by presentation services.
I would really appreciate any input here. If I've left out any relevant items, please ask questions and I'll try to be as thorough as possible.
Thanks in advance!
Miguel.-
Edited by: user11343977 on Jul 23, 2010 11:49 AMChanges made. Here are the log entries:
sawlog0.log
Type: Error
Severity: 40
Time: Mon Jul 26 12:27:59 2010
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
Properties: ConnId-13,13;ThreadID-4091849616
Location:
saw.odbc.connection.open
saw.connectionPool.getConnection
saw.threadPool
saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for 7880429329 in repository Star: invalid user/password. (08004)
Type: Error
Severity: 42
Time: Mon Jul 26 12:27:59 2010
File: project/webconnect/connection.cpp Line: 276
Properties: ThreadID-4091849616
Location:
saw.connectionPool.getConnection
saw.threadPool
saw.threads
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
And here is the relevant entry from the NQQuery.log -which is enlightening if I should say:
--------- Oracle BI Version: 10.1.3.3.2.071217.1900 : New Session Timestamp: 2010/07/26 12:34:33
+++Impersonator:fffe0000:fffe0004:----2010/07/26 12:34:59
-------------------- An initialization block named 'Authorization', on behalf of a Session Variable, issued the following SQL query:
SELECT ':USERID','Administrators','GuestAccount' from dual
Returned 0 rows. Query status: Failure -
Clearing of impersonal account items
Hello,
how can I clear impersonal account items vs. another impersonal account?
Is it possible with FB05 in RFBIBL00?
Regards
NorbertHello !
I hope someone can help me with this .
i have been trying to look at other thread discussions and I couldn't find any similar issue yet. But I know that for some companies who have 3 currencies, this is also an issue.
Maybe, below will help:
1) When the item was delivered: Jan 02
Currency 1/Local Currency posting:
Debit AUC 1000
Credit GR/IR 1000
Curr 2 posting (automatic):
Debit AUC 181.81
Credit GRIR 181.81
Curr 3 posting
Debit AUC 125
Credit GRIR 125
2) When the invoice was received and posted: Jan 20
Currency 1/Local Currency posting:
Dr GRIR 1000
Cr Vendor 1000
Curr 2 posting
Dr GRIR 185
Cr Vendor 185
Curr 3 Posting
Dr GRIR 121
Cr Vendor 121
3) During the settlement, the postings became ( Jan 31)
Currency 1/Local Currency posting:
Dr FA 1000
Cr AUC 1000
Curr 2 Posting
Dr FA 188
Cr AUC 188
Curr 3 Posting
Dr FA 120
Cr AUC 120
Here you can really see that the LC in the AUC acct ended up zero but the two other currencies still have balances.
How can I clear them ?
I really can't find a way to solve this.
Thanks in advance for those who can extend their help.
Regards,
AC-2-IT -
Issues with migrating to SUN JVM
Hi
Chapter 4 of the "Microsoft Java Virtual Machine Transition Guide for IT Professionals" [part of the documentation for "The Diagnostic Tool for the Microsoft Virtual Machine"] contains[under a discussion of disabling Java] :
(a) '... the Sun JRE, which "impersonates" the Microsoft Java Virtual Machine in IE ...';
(b) 'Some Java plug-ins install in a Windows system by "impersonating" the Microsoft Java Virtual Machine using the same registry entry and Class ID in installation ... Be cautious when installing JREs that impersonate the Microsoft Java Virtual Machine ...'.
Can anyone provide more information about this "impersonation" and what to be "cautious" about?
In particular:
(1) Does the impersonation only affect interpretation of applets under Internet Explorer plus any direct HTML references to the associated registry entries [and not any direct executable references to the Microsoft Java VM]?
(2) Does the Microsoft Java VM have to be retained [even if another JRE is installed] to support any direct executable references to it?
When I run "The Diagnostic Tool for the Microsoft Virtual Machine" on a Windows 98SE system, its VM Dependency Report has many entries for Micrsoft library modules - eg IEDETECT.DLL - and its Visual J++ Class Report has many entries - eg C:\WINDOWS\SYSTEM\MSHTML.DLL.
There is no information about whether such dependencies are critical - the modules may have alternative paths if the MSJVM is not installed.
At this stage, I suspect that Microsoft is not going to issue updates to such modules [Windows 98 is no longer fully supported] and therefore it would be unsafe to remove the Microsoft Java VM.
Chapter 4 also mentions a "TreatAs" subkey, and recommends removing it. Does the Sun JRE install or rely on such a subkey?
Chapter 6 says that "The use of Microsoft extensions is easy to find in current J++ source files ..." but is there any way that users without access to such source files can find which executable modules are dependendent on the entries shown when I run "The Diagnostic Tool for the Microsoft Virtual Machine" and look at its Visual J++ JAVAREG Report [which lists CLSIDs and associated Java classes for msjava.dll].
Regards,
Peter JonesHI Owen,
JVM dependent web Applications are not working with IE after migrating to SUN JVM from MSJVM
steps I followed are as follows.
1)uninstalled MSJVM using MSJVM removal tool
2) Install SUNJVM 1.4.2_07
os used is windows xp sp2.
I did checked SUN JVM in Internet options.
Then I tried to test JVM dependent web apps on this they are not working. sometime JVM was attempting to upgrade to a newer version.
But strangely it started working when I followed follwong steps.
1) Install SUNJVM 1.4.1 (initial) - this version actually works proper with Documentum
2) Uninstall SUNJVM 1.4.1 from Add/Remove Programs AND Remove the two Java Folders from Registry, under the Software Folder
3) Reboot the pc
4) Install SUNJVM 1.4.2_07
5)checked SUN JVM in Internet options.
Can Some one help me to know the reason for both not wokring and working.espl working since deepending on this I need to decide on how to migrate to SUN JVM
Thanks
Nagaraj
History:
My client is having MSJVM on their PCs I had suggested to migrate all these MSJVM dependent apps to SUN JVM. In this process I wanted to test these MSJVM apps with SUN JVM. while setting test lab I observed above mentioned behaviour. -
How to fix Task form issue which is not opening in browser?
Hi All,
When trying to open task form link which is in email, facing:
How to fix this issue? thanks in advance!Paul,
My scenario is: Having a team site and a sub-site. In sub-site, created on list form associated with designer workflow which will assign approval task to a person who are not a member of this sub-site but member of team-site.
Before assign task, assign permission to that person using impersonation step like:
Add Approve to item in Current Item
Add Approve to item in Association: Task List
When click the task link which receive in email, that person facing above issue. After I add that person in sub-site site viewer group, then it working perfectly.
My question is, is it possible to give approve permission to task list by designer workflow to a person who are not a member of a sub-site? -
Move Certification Authority Web Enrollment to new server issue.
Hello,
i'm trying to move the Certification Authority Web Enrollment from one server to a new one. I've got a fully functional server where i can enroll any certificate i want and everything is working properly.
on the new server i configured I'm facing a problem that seems to be an impersonation issue. Indeed, while i try to enroll a certificate i get the following error msg from the interface :
Request Mode:
newreq - New Request
Disposition:
(never set)
Disposition message:
(none)
Result:
The RPC server is unavailable. 0x800706ba (WIN32: 1722)
COM Error Info:
CCertRequest::Submit: The RPC server is unavailable. 0x800706ba (WIN32: 1722)
LastStatus:
The operation completed successfully. 0x0 (WIN32: 0)
Suggested Cause:
This error can occur if the Certification Authority Service has not been started.
an i can also see on the CA it targets the following application error event :
Event 18209, ComRuntime:
The application-specific permission settings do not grant Local access permission to the COM Server application C:\Windows\system32\certsrv.exe with APPID
{D99E6E74-FC88-11D0-B498-00A0C90312F3}
to the user NT AUTHORITY\ANONYMOUS LOGON SID (S-1-5-7) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
While i register a certificate on the server were it all works fine i can see event in the Security log on the CA that authenticate the user i generate the certificate with, where-as with the server were it does not work, all seems to be anonymous.
IIS configuration are identical on both servers and the delegation has been set identically too ( ADUC object )
Any idea how what I could check next?Hi,
Regarding event 18209, please follow steps from this article below to assign access permissions for the user mentioned in the event message:
Event ID 18209 — COM Security Policy Configuration
http://technet.microsoft.com/en-us/library/cc726319(v=WS.10).aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Maybe you are looking for
-
How to add/set attribute "collectiveParentRDN" in DSEE6.3.1 installation.
Hi, I'm new to DSEE and I have a question , I have a code which 1. First it binds to LDAP server through a proxy user. 2. Authenticates a user 3. Gathers all the roles that a user is a member of. It uses ,collectiveParentRDN as a DN attribute. For
-
Locking multiple records in a database table at a time
Hi Experts, I have a requirement to lock multiple records in the database table for writing. I have created lock object in SE11. But with this we have only 2 possibilities either lock entire table or lock a single record at a time. My requireme
-
Options for Planning in Upgrade
We're currently running BPS in SEM 3.2 and are upgrading our BW to BI 2004s. We have the option of either: a) Upgrading SEM to 6.0 as we upgrade our BW...will we have to go to 4.0, or can we go direct to 6? b) Moving BPS to BW 2004s c) Migrating BPS
-
See question above.
-
COMPRESS=Y parameter in exp comand in signifies that
in oracle,COMPRESS=Y parameter in exp comand in signifies that