Implement and Reverse SAP Note in 4.0B

Hi All,
How do you implement and reverse SAP Note effects in version 4.0B?
For example, OSS Note 160970.
Thanks.
Tyken

Sadly it's not available until 4.5B, and only then as an add-on.
Back in the bad-old-days a note had to be applied manually by a developer, following the instructions in the note, looking at the context code around the changes and trying to type everything in without making mistakes.
And you have to check for dependencies as well.
Good luck.
Nick

Similar Messages

Is it possible to force the implementation of a SAP note?

Hi guys,
I am installing SAP CPM, software components CPD 1.0 and PICM 1.0. During the SAINT installation, I hit an error for both components in the ABAP Generation Phase. I have found two notes with automatic corrections (1843317 and 2040519) to fix the errors.
However, when attempting to implement both notes through SNOTE, it shows them as "Cannot be implemented". I am assuming this is because the software components are not fully installed yet.
I know that I can get the correction instructions from each note and manually put them in, but one of the notes has 15+ corrections. Not exactly how I want to spend my day.
Is there a way to force SNOTE to implement a note that is listed as "cannot be implemented"? If not, does anyone have a better way to get the corrections applied besides doing each one manually?
Thanks!
-Jayson

Hi,
Here i would recommend to go for correction instruction instead of searching force implementation of SAP Notes as notes are used to fix bugs under some specific SAP standard codes and affects specific programs even and only recommended if support package still to be provided by SAP.
Also need to check for the supported releases under SAP notes for performing corrections (strictly based or relevant for mentioned releases.)
Hope you will understand and will try to avoid any issues by opting any force methods to implement the SAP Notes.
Regards,
Gaurav

SAP System inconsistency for Inbound delivery / MIGO and a "sap note"

Hello Friends ,
After following SAP instruction on how to remove the inconsistency between posting GR through MIGO (Inv. mang.) and the reflection of the goods movement status in the inbound delivery document - done that using sap note 570991
the problem is that the system start behaving in a weird way throwing unjustified Error messages for any suggested goods receipt using MIGO with reference to inbound
for example after creating an inbound delivery document and trying to post it via migo , an error will pop up
- Inbound delivery storage location cannot be changed to here Message no. VLA316
the thing is i didn't even maintain any storage location entry up to that point and yet i cannot post any stock !!
also another error like
- Inbound delivery batch cannot be changed to *** here
which doesn't make any sense because there is not batches in the inbound document !!
i think this behavior is coming from the "Document Flow Update for Stock Postings" inbound indicator at the shipping parameter at client level customization
i need help on how to overcome this annoying SAP Bug/Problem specially i am in a post go live critical situation

Hi,
The messages you mentioned were introduced to avoid inconsistency between inbound delivery and IM, through the note: 1050944 - GR for inbound delivery using inventory mgmt as of ECC 6.00
If the messages are issued incorrectly, then you may check for SAP notes (I couldnt find anything relevant) or raise an OSS ticket to SAP.
Regards,
AKPT

How to find modules implemented and licensed but not used.

Hi, one of our customer is in such a situation that they have no idea of which are the modules implemented. They have a big list of modules licensed but these are not necessarily be implemented. Is there a query to find out the same or any other option.
Regards
Santy

Hi,
Hi, one of our customer is in such a situation that they have no idea of which are the modules implemented. They have a big list of modules licensed but these are not necessarily be implemented. Is there a query to find out the same or any other option.Please see (Note: 420648.1 - How to Establish if a Product is Installed in e-Business Suite) and (Note: 443699.1 - How to check if certain Oracle Applications product/module is implemented?).
Thanks,
Hussein

Quicktime Player fast-forward and reverse buttons not working for audio

I have Quicktime Player 7.7.3 for Windows and the fast forward/reverse buttons will not work while playing audio files. I've tried it with mp3 and m4a, neither will work.
The go to end/go to begining buttons are working fine.
The ff/reverse button don't work very well for video files, they only will move a few frames at a time, but they will not work at all on strictly audio files.
I've looked at the preferences, and the software is up to date.
the only way to ff/reverse is to go to Window > Show A/V Controls and use the Jog Shuttle, but that is a clumsy workaround. I'd rather have the playback buttons work properly in the first place.
Is there something else I should be doing (aside from purchasing QT Pro, that is)?

...stupid decision to replace the iTunes feedback...
Not replaced, just moved. Now grouped with all other Mac OS X feedback:
http://www.apple.com/macosx/feedback/
It's not a bug. If it was we would all have this problem. My Macs don't.
Shut iTunes down.
Go to ~/your user name/Library/Preferences and place the file "com.apple.iTunes.plist" in the trash.
Try iTunes again. If your problem is solved, empty the trash.

Sap Note:792372 Implement?

Hi,
My name is Samad Farooq.
Has any one implemented the SAP note:792372, by the name of kp97 cumalative copying. It is used to add two versions of planning from source to target.
I had implemeneted this note, but cannot see any changes. Can any one help me
how to see the changes or to administrator the note. when i implmented it prompeted with green lamps this indicates it had sucessfully implemented..but why i can see the changes.
Looking to hear from u all..
thanking you all for ur time.
Samad Farooq

Hi,
those Suggested SAP Notes are the prerequisites for Implementing your expected SAP Note. You will see the corrections list in that SAP Note, once you traverse that listed corrections, you will come to know about some prerequisite SAP Notes, which need to be applied along with the SAP Note, which you are going to implement.
The SNOTE will suggest you the list of other valid and required prerequisites/dependent SAP Notes, which will be downloaded and applied in one run along with that SAP Note. you can not ignore them. Before you implement the SAP Note, read the prerequisite SAP Notes carefully.
Refer [this link1 |http://help.sap.com/saphelp_nw04/helpdata/EN/60/8def3981fe5d7de10000000a114084/content.htm] and [link2|http://help.sap.com/saphelp_nw04/helpdata/EN/c3/0db13a95bed348e10000000a114084/content.htm] to get more information about such situation.
Regards,
Bhavik G. Shroff

Sap notes and general site usability

Why can't i find sap note 1219819? It was referred to me by a regular poster on the forums, http://forums.sdn.sap.com/profile.jspa?userID=3852876. if it's legitimate, then why does it not show up in searches, neither on the site or Google? Why is there no page for listing, searching and viewing sap notes? Why is it, in general, so hard to find the info I need on this site? I loathe having to use this site.
I recommend improving the search feature and make the site easy for new users to zero in on what they might be looking for.
(Rant complete)
-K

>
visualkev wrote:
> That's the key to support. You have to assume that someone coming into a forum asking questions doesn't know what you know and you therefore have to mention the obvious little bits, because they are not readily apparent to the casual (noob) observer.
Well, this isn't a support site, it's a user forum. (actually, it's meant to be an expert forum, but we'll let that go for now). So basic knowlege is assumed.
Anyway, you can find notes at service.sap.com.
Rob

SAP Note 2111087 - enhancement to PM/QM list edit reports

Hi,
Has anyone experience of implementing the following SAP notes which appear to give enhanced functionality within commonly used PM/QM reports:-
2111087 - Display of row count in list edit reports
2079317 - Preparatory note for display of row count in list edit reports
2079318 - Display of row count in PM list reports (SAP_APPL)
2079384 - Display of row count in PM list reports (EA_APPL)
2079386 - Display of row count in QM list reports (SAP_APPL)
2079387 - Display of row count in QM list reports (EA_APPL)
The above notes appear to enhance over 90 list edit reports within PM & QM and have been created from an improvement request within the EAM Customer Connect Cycle 3.
No business functions need to be activated to use this function.
Regards
Gary B

Hi Gary,
I have implemented the note 2111087 and its related notes
2079317
2079318
2079384
2079386
2079387
as per the above notes the counter field is appearing in most of the transaction, which are listed in the Note 2079318 given by SAP.
But still, the counter field does not appear in some of the transactions like IA08,IA09,IH06,IL05,IP15,IP16 and IP17.
I have checked the dependent notes and searched for correction notes, but couldnt find any.
Let me know if anyone has faced similar problem.
Thanks in advance.
Regards. Pavan

SAP Note implemetation - SNote or manually

Recently for Budget 2007-08 for India SAP has released a master note which has a series of notes to be implemented. These notes includes screen, DDIC and coding changes.
As far as I know screen & DDIC changes has to be manually implemented. For coding related changes if Snote status is "Can be implemented" should one implement through Snote or manually.
Kindly suggest the merits and demerits of these techniques.
Thanks
anu

Hi Ani,
After downloading the SAP Notes: Check the implementation Status. If it is "Can be Implemented" then the SAP Notes is suitable for implementation in your system.
Read the SAP Note carefully, this is mandatory there can be any other pre-requisite notes or some other notes that might have to be implemented along with this note which'll be explained in the SAP Note. Once you have gone through them.
Implement all the Pre-requisite notes and follow the Manual steps that are specified in the note. Once all the manual steps are implemented.
Click on the "Implement SAP Note" button to implement the SAP Note. you may get a pop-up here to read the SAP Note, say "YES". Now all the code corrections will be placed in the system in which you are implementing. The Activation pop-up will appear with all the objects that have been changed with the Code Corrections.
Click enter. Now the implementation of SAP Notes is completed. The implementation status changes to "Completely Implemented". Change the processing status to "Completed".
Please let me know if further details are required.
Thanks & Best Regards,
Goutham.

Object Locked under deleted TR, SAP Note 100409

Hi All,
We tried to implement SAP Note 100409 in TR1, but it showed an error, so we cancelled the operation, deleted the object from TR, ran SE03, and then deleted TR1.
Now when we try to implement the same SAP Note using TR2, it shows an error that the object ZKAOIDE0 is locked under TR1. Could someone tell me if its possible to unlock that object now? Or is there any other note which can be implement instead of this one.
Thanks for the help.

Hi,
Object name mentioned is a Z-object. What kind of object it is? If Z object, OSS note for custom object!!!???
Go to version management and check if you can see this object locked under TR1. It could be that buffers was not cleared. Always remember, while implementing OSS notes if the changes needs to be reverted, then you shouldn't go by deleting the object from TR. It wont delete the changes.
You have to reset the implementation from SNOTE t-code and then unlock the objects.
You can check the object list of the TR in E071 table..
Thanks,
Vinod.

Doubts relating to SAP Notes?

Dear All,
Being a new bee to ABAP environment, I am eager to know some information regarding SAP Notes.
often I am hearing that SAP notes have to be implemented for some programmes. Why we implement SAP notes, and how we add sap notes to the programmes.
If I want to add a note to Purchase Order process, under which transaction can I add, does it change any standard behavior of the system?
What is Development, how does it differs with standard sap process?
under which transaction all this developments take place,
How can I see all developments done by a consultant in a project?
Please clarify my doubts and your help will be highly appreciated
thank you
Raghu Ram

Hi,
Please do not create multiple threads for same question.
Your question has been answered in ABAP general forum.
How and Where SAP Notes have to be implemented?

Implementation and Overview

Hi,
What are the contents of the material "SAP BW Implementaion and Overview(TADMBW)"

hi Ramya,
check
https://websmp204.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TADMBW&COLLECTION=43&LANGUAGE=
TADMBW SAP BW Implementation & Operation German English
Course version: 2004/Q3
Duration
5 day(s)
Course Goals
This course will prepare you to:
- Perform administration tasks in an SAP BW system
- Optimize the performance of an SAP BW system
- Put to practical use SAP knowledge gained from previous courses and from this course in the role of junior consultant
Target Audience
Certified Technology Consultants responsible for the implementation and operation of SAP BW, who already have experience of implementing and operating SAP systems
Prerequisites
Essential:
Participation in this course and in the advanced certification examination is permitted only for certified Technology Consultants (2000 , SAP R/3 4.6)
or Technology Consultants mySAP Technology Administration (2002, SAP Web AS 6.10)
or Technology Consultants SAP NetWeaver Web AS Impl. & Oper. for [DB] (2003, SAP Web AS 6.20) for any operating system and database
(certificate must be submitted at the start of the course; content for the certificate required is contained in courses:
TADM10 SAP Web AS Implementation & Operation I
TADM12 SAP Web AS Implementation & Operation II
TADM5x
Knowledge of SAP Web AS
TBW10 SAP Business Intelligence Data Warehousing
Software Component(s) and Release(s)
SAP BW 3.0
R/3 4.70
WEB AS 6.20
Course Content
In-depth examination of SAP BW administration and SAP BW performance:
- In-depth examination of SAP BW Customizing for selected topics
- Concept of process chains
- SAP BW transport system
- Performance of loading processes (extraction, process distribution)
- Working with indices (index types, use)
- Query performance (optimizing OLAP access)
Aggregates for supporting query performance
Introduction to using SAP BW analysis tools:
- Creating and executing simple query definitions with the BEx Query Designer
Advanced certification examination covering the content of course TBW10 (Business Information Warehouse (BW)- Data Warehousing) and of this course
Notes
This course requires Knowledge of SAP Web AS. There will be no time spend on this topic during the course.
To ensure that you retain the knowledge gained in this course and for the successful completion of the certification examination, we recommend that you consolidate the content in your own time after the course.g.

SAP Note on CIS(UK) (Witholding Tax)

Hi Experts
Please Advise whether the above note (1047161) on Construction Industry Scheme (UK) is available on the ECC 6 as standard or we still need to implement and use the note?
Best Regards
Varun

Hi,
Normally, it depends on your support package...
SAP_APPL 470 SAPKH47029
SAP_APPL 500 SAPKH50017
SAP_APPL 600 SAPKH60011
SAP_APPL 602 SAPKH60205
SAP_APPL 603 SAPKH60304
SAP_APPL 604 SAPKH60402
If for your release you are in the aforementioned support package or higher, then you don't have to implement it.
Regards,
Eli

Search & Install SAP Notes using Solution Manager

Does anyone have specific documentation on how to search and install SAP notes using Solution Manager. I have read numerous times about this capability but have not found any success finding specific info on how this is done.
Can someone please share their experience? Can you also provide some documentation?
Thank you

Dear Ramesh,
Like what Rajeev has mentioned, you can use transaction tab in your message/ticket for searching for note or even deploying to satellite system.
for this in solman you need to maintain these 2 enties, so that it takes you to service market place.
trxn: dno_cust04
Field Name                             Seq                   Field Val
URL_DISPLAY_NOTE             1              http://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm={&1}&nlang=EN
URL_SEARCH_NOTE              1              http://service.sap.com/notes
Regards,
Shyam.

Issue regarding Web Application Designer (WAD) in SP25 / SAP note 1558066

Dear all,
we recently applied SAP NetWeaver BI SP25. After the update we encountered severe issues in WAD and applied SAP note 1558066, this means I deleted from RSZWMDITEM all records having MDITEMNAME TARTITLE and afterwards updated metadata.
The situation improved a lot, i.e. now I can open web templates or close WAD, but I still cannot drop Web Items in layout tab. I am able to include Web Items in overview tab, but again in layout tab I cannot change the sorting or remove Web Items.
Did anyone come across similar issues and find a solution?
Thanks for your input, best regards,
Bjoern

Hello Björn
I've exactly the same problem. See
Could you solve the problem and if yes, how did you do it?
Thank's
Patrick

Implement and Reverse SAP Note in 4.0B

Similar Messages

Maybe you are looking for