Implement support package SAPKH50010

Dear All,
Right now we are working on ECC5.00 with on supp pack SAPKH50009.
Recently we had an issue, referred the same to SAP, they have suggested to Implement support package SAPKH50010. New GL indicator has been activated in our system.
Let me know, how to proceed regarding this support pack SAPKH50010.
Treat this issue is on priority.
Thanks in advance
Regards,
Prasad.

RESOLVED

Similar Messages

How to implement support packages with BW connected to R/3??

Hello!
We use a BW system togehther with our ECC6. So we have activated Datasources in LBWE.
Every time, when I import a support package, there is a warning regardin LBWE an data to process.
Our workaround is to stop the updater in sm13, empty the queues and start the support packages.
The problem is: The updater is needed for the supportpackage too, so we have to activate it again...
Has anyone a "best practise" for this scenario???
Thanks
Juergen

Hi Dirk!
Thanks for the notes, yes, I know them...
Fine theorie...
The problem is:
Note that this processing must take place during system downtime because otherwise the different objects will be immediately filled with data again.
We are working worldwide and we have no real downtime, if the system is running...
So, we used the way to stop the updater to be shure to get no new objects...
Juergen

Support Package Manager for EBPCRM

Hi,
In CRM/EBP SAP systems there is used special 'Support Package Manager for EBPCRM' to implement Support Packages instead of standard transactions like SPAM/SAINT.
I'm trying to implement more then one Support Package into the system however this is probably not possible. It seems that it is not possible to create import queue with more then one Support Package? Importing SPs one by one is very time consuming task. SO that's why I'm wondering about this special tool.
Do you have similar functionality?
BR
m./

Hi Jose,
Yes I've put all the SPs into '\usr\sap\trans\Eps\in'. But 'Support Package Manager for EBPCRM' asks me for particular one while I'm going to import it. There is no such an functionality to use queue creation.
BTW: I'm on SAP CRM 4.0 on WIN/MSSQL platform.
BR
m./

There's any way of knowing what Support Package we had implemented?

Hi!
I need to know if exists a kind of "history" of the system. I mean, a trx that shows you when you implemented X support package and when.
My problem is that I need to implement some oss notes to a z program that is a copy of an standard. The z program was created (copied) some years ago.
I need to know the Support Package that we had at that time because I need to check if the prerequisites applies to the Z version.
I you don't understand what I need, please tell me...
Thanks in advance!
Bet

If you got the SNOTE transaction, you don't need to care about support packages -;)
Just pass the OSS note and the system is going to tell you if it can be implemented -:D
Greetings,
Blag.

Is the ASU Toolbox important for support package implementation?

Dear all,
when I want to implement new support packages there comes the hint with number 1000009 (ASU Toolbox).
Is it important to implement the toolbox or is it optional?

Hi,
Its not necessary!!
SAP Exchange Infrastructure (SAP XI) enables you to implement cross-system processes. It enables you to connect systems from different vendors (non-SAP and SAP) in different versions and implemented in different programming languages (Java, ABAP, and so on) to each other. SAP Exchange Infrastructure is based on an open architecture, uses open standards (in particular those from the XML and Java environments) and offers those services that are essential in a heterogeneous and complex system landscape.
With regard to POS lot of domestic softwares are avilable other than Triversity.
The SAP for Retail solution portfolio includes customer-centric solutions from SAP Triversity, an SAP company. The applications from SAP Triversity focus on the "sell" side of retailing. They enable retailers to deliver a best-in-class customer experience across all channels, while helping them to optimize their operating efficiencies and increase profitability.
You can integrate thirdparty POS system to SAP.
http://www.saptriversity.com/
Bye,
Muralidhara

HR Support Package (HRSP-manual implementation)

Hi,
Is someone know, how i can see the manual implementation to do during the installation of a support package?
Thanks,
Regards
Edited by: marc frenay on Jun 8, 2009 10:48 AM

Hi Marc
SP implementation is the responsibility of Basis Consultant and based on the requirement basis consultants will download the SP from the SAP.
Thanks
Sheetal

DDIC_ACTIVATION ERROR WHILE APPLYING SUPPORT PACKAGE SAPKW35020 IN ECC5.0

Hi Gurus,
I am getting error DDIC_ACTIVATION while applying support package(BW) SAPKW35020 in ECC5.0 with MSSQL database in Windows server.
I am not able to reset the queue, when i tried to reset the queue the system prompting that " cannot reset queue while DDIC_ACTIVATION" phase".
Can you please help to reset the queue and implementing this support package.
Thank you,
Regards,
Ganesh

Paste the SPAM log here.
Regards,
Nick Loy

Support package stack 11 (Java and ABAP)

Does anybody have any experience with the latest support package stack 11 already? Are there some problems solved, and more important: are there new errors introduced?
Thanks for your help.

Hi Deepu,
Thanks for your reaction. I'm familiar with this OSS note. I'm mainly curious to customer experiences who have already implemented it. This SPS will solve some of our problems, but we're a little scared for the new errors that will be introduced with it.
Guus

Queue / Support package issue

Hi everyone!
Can someone give me direction on resolving the following issue?
Ssytem: SAP ECC 6.0
I first updated the Kernel from level 58 to 83. eveything went fine from what I can see.
Then I have been importing a queue to implement some Support Packages. the import has now stopped with the following errors:
I am not too sure what it all means and where to go from there.
Thank you for any explanations or suggestions
Regards
Corinne
1 ETP199X######################################
1 ETP152 TESTIMPORT
1 ETP101 transport order     : "SAPK-60007INISOIL"
1 ETP102 system              : "QAS"
1 ETP108 tp path             : "tp"
1 ETP109 version and release : "370.00.09" "700"
2EETW165 Function "OIUREP_GET_RECENT_ROYHIST (OIUREP_ROY_HISTORY|05)" does not fit into the existing function group "(OIUREP_ROY_REPORTING|09)".
2 ETW167 Please transport the whole function group.
2EETW165 Function "OIUREP_GET_RECENT_VOLHIST (OIUREP_ROY_HISTORY|06)" does not fit into the existing function group "(OIUREP_ROY_REPORTING|10)".
2 ETW167 Please transport the whole function group.
1 ETP152 TESTIMPORT
1 ETP110 end date and time   : "20070213113558"
1 ETP111 exit code           : "8"
1 ETP199 ######################################

Hi Ammey and others ,
The queue import failed with the same error.
I have found in note 822379 that this message can actually be ignored.
SAPK-60006INISOIL - SAPK-60007INISOIL
           Symptom: If the Support Packages SAPK-60006INISOIL und SAPK-60007INISOIL are imported together in a queue, the TEST_IMPORT step returns an error for Support Package SAPK-60007INISOIL. The following error messages are displayed in the test import log:
Function OIUREP_GET_RECENT_ROYHIST (OIUREP_ROY_HISTORY 05)
   does not fit into the existing function group.
   (OIUREP_ROY_REPORTING 09)
Function OIUREP_GET_RECENT_VOLHIST (OIUREP_ROY_HISTORY 06)
   does not fit into the existing function group.
   (OIUREP_ROY_REPORTING 10)
           Solution: You can ignore this error by choosing 'Extras'-> 'Ignore test-import error'. The error will not occur during the later import.
based on your latest message (2.39 PM) suggesting to ignore "Warnings" I should be able to mark the queue now as "Ignore test-import errors" and bypass my original error. That was the only error of type 8 or above.
Thank you
Corinne

Import Lang. part of support package

Hi all!!!
I tried import language part for support package. In SMLT->Other Tools->Import Language part of support package. choose language. and i see table of supp.packages First position of support package is SAPKINBB9A PI_BASIS 2005_1_700. Where I have get this package

Hi Konstantin
SAPKINBB9A PI_BASIS 2005_1_700 is a SP you need to implement via SPAM
You can download the SP from SAP Marketplace at the software distribution center, just look for SAPKINBB9A.
Regards
Juan
Please reward with points if helfpul

Support package stacks: Do we need to import all SP in the stack?

Hi all.
We are about to import Support Package Stack 13 into our ERP 6.0 system. The SPS includes a lot of support packages for software components such as IS-OIL, IS-UT and other IS-* components.
These components are inactive in our system, and are not used. However, I know that the recommendation is to import the complete stack.
I am therefore having some doubts if it is wise to import the IS-* related support packages.
Please advise.
Regards,
Thomas

Thank you for your feedback.
However, I would like to ask if the only argument is to follow SAP recommendation? What risks are we running if we do not implement the IS component support packages?
As the IS-* components are not active, I don't see how not importing these support packages will cause "inconsistence" in the system. Also, it would reduce the total number of support packages that needs to be included.
I am generally positive to following SAP's recommendations, but in this case we are are in a situation where we need to lift the SAP system from SPS 8 to SPS 13 in one operation. That includes a massive amount of support packages, and possibly a lot more time than the timeframe we have available.
Regards,
Thomas

Support package requierement for unicode conversion

We are currently planning a unicode conversion for a SAP 4.7enterprise 1.1 extension version, running under Aix and Oracle, Basis/ABAP SP 35, HR SP20.
According to the conversion guide, we must implement at least Support Pachage 60 for Abap and Basis, no explicit requierement for HR SP level.
I believed that we must applied SAP procedure and exclusively HR Support Package Stack up to 27, which include SP 60 for Basis and Abap and HR 61.
Our HR guys argue there is no indication from SAP that the SUPPORT PACKAGE STACK policy is mandatory and that SAP will provide us with normal support if we run the unicode conversion with SP Basis/ABAP 60, in other word even if we do not respect the support package stack combinaison. Need help on this issue before starting the project

Exterprise 4.7 is Unicode-Compliant,meaning that you can have unicode in 4.7.
If that the case, you should convert to 4.7 Enterprise Ext 2.00 Unicode First.
later only upgrade to ECC 6.0 after 2 years, as you said.
My answer is yes, to your question.
You can download the installation kits at:
http://service.sap.com/swdc
anyway, it is recommended to have the latest SP in your system.
cheers,
Vincent

What is Plug-in, SUpport Package, Add in and how R3 and BW are interdep

Hello Every One,
Can some one explain me in simple words about the terms, Plug-ins, SUpport Packs, Service Packs, Add-in's, SAP Notes and how R3 and BW are interdependant in the above mentioned terms? Can anyone give a simple example?
regards,
kishore

Hi,
Plug-ins:[/b]
Additional program which enhances the functionality of an existing program. Additional functions which may not be needed or are mutually exclusive are often implemented as plug-ins.
For example ICMAN contains various plug-ins for the various network protocols which it supports (HTTP, SMTP, FTP,...).
The interface between mySAP.com components (for example, SAP APO, SAP BBP, SAP BW, SAP CRM) and one or more SAP R/3 systems.
The SAP R/3 Plug-In unites the plug-ins APO-CIF, CRM-R3A, BW-BCT and B2B-PRO-PI. This simplifies maintenance significantly and guarantees compatibility between the individual mySAP.com components. With SAP R/3 Plug-In, you can use several mySAP.com components simultaneously in a single system. SAP R/3 Plug-In supplies the mySAP.com component transaction data and master data in real time.
Technically, there are two versions of each release of the SAP R/3 Plug-In, a PI version and a PI-A version.
The technical names of the software components are PI and PI_A
SUpport Packs
A set of corrections for serious software errors in the SAP system.
Support Packages are compiled periodically and made available in the SAP Service Marketplace.
Service Packs
A grouping of different services for a quotation.
A service package can be agreed between a service provider and a customer within a service contract or as part of a complex service plan, which can also be additionally agreed in a service contract.
EXAMPLE
A "Winter Car Check" service package containing the following services is agreed in a contract:
Cooling water check
Brake fluid check
Battery inspection
Light inspection
Add-in's
add-ins are enhancements to the standard version of the system. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software
http://help.sap.com/saphelp_erp2004/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
SAP Notes
Documentaion Prepared by SAP for publishing clarity in case of corrections or changes happening to the SAP Software.
R3 and BW are interdependant
Then BW takes the Data from R/3 : so there has to be Support Pluggins which are mapped to the BW server.So the SAP Supported R/3 Versions should be used.
Eg: SAP Stoped the Support for r/3 4.0 series
regards
Happy Tony

Objects for deletion included in support package are not deleted

Hi experts,
How can i create a support package using Add-on Assembly Kit that deletes several objects?
This is the case:
We have DEV, QA and PROD systems. The objects are deleted on DEV and the transports are released. The transports are automatically imported on QA and the objects are deleted -checked they are gone. A support package of the product is created on QA including the transports that delete the objects. The SP is released successfully and imported on PROD successfully. The objects that should be deleted still exist on PROD. I've checked the logs for errors - no errors found.
Do you have any idea what could be the reason?
Best regards,
Petar

Note number 1581093.
As mentioned in the symptom. Version 2 of the note is created to extend the functionality provided in the Version 1. Version 3 of the note is created to correct the error in Version 2.
Information from SPAM
SAP_HR 600 0054 SAPKE60054 Human Resources
How can I find the information required if neeed?
WHen I try to reset the implementation I get the message
No correction instructions implemented for SAP
Note 0001581093
Edited by: Wojciech Walczak ITMAXI.COM on May 25, 2011 12:00 PM

Support Package Stacks Best Practice

Good morning all,
We're at the start of a mySAP ERP implementation and we'd like to set a strategy as regards how we implement SP Stacks.
We are only using the base mySAP ERP functionality; we're not using the HR, Retail, Public Services extensions. Because of this, I'd like to know what is the best practice for applying SP Stacks in our environment.
Do we need to install the SPs for the HR, Retail, etc.. extensions to keep the SP Stack consistent, or do we simply install only the base SPs that we require?
Any help is greatly accepted.
Thx,
Arwel.

Hi Kobby,
Thanks for your information.
The Support Package Stacks for 7.0 version is 15
I would like to know the Stacks for SAP Solution Manager - 4.0
Version.
Thanks and Regards,
Sateesh.Kandula

Implement support package SAPKH50010

Similar Messages

Maybe you are looking for