Implementation and upgrade

As a developer, what do you do in XI implementation and upgrades? Can anybody give step by step?

Hi
1. Project Preparation
2. Business Blueprint
3. Realization
4. Final Preparation
5. Go-Live and Support
. Project Preparation & Business Blueprint are the key responsible for Architect and Team Leads.Here they prepare the complete technical documentationsfor all the interfaces depending upon the requirements of the client.
Development of interfaces takes place in realization phase.
Dev - quality- production
During Go live and support you will monitor all theinterfaces. If they have any issues you will resolve them.
For documentation about XI interfaces see the below link
/people/krishna.moorthyp/blog/2006/07/29/documentation-html-editor-in-xi
Check this link given below...
http://service.sap.com/asap -> ASAP Implementation Roadmap for SAP Exchange Infrastructure

Similar Messages

Implementation and Upgrade - Workcenter

Hi!
We are setting up a SM7.0 SP-15 environment. We are planning to use ' Implementation Workcenter. I am looking for any pointers in using this new feature vs. the old way of using via solar transactions.
Thanks in advance
Mark

Hi Mark,
I am yet to make a practical use of it, but very keen to. [This thread|Work Centres as of SP15 - A doubt regarding authorisations; may provide you an idea.
Best regards,
Srini

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

SCM 5.1 Implementation Project, Upgrade Project

Hello,
Is any one working on SCM 5.1 Implementation or upgrade Projects..
If you are doing SCM 4.0 to SCM 5.1 upgrade what are the Delta changes you have observed for DP, SNP , PPDS, GATP modules?

i suppose its called SCM2007
you can find the help file for this in help.sap.com
you can also find the release restrictions and release notes for SCM 2007
not sure of active customers
the release date is 31/08/07 as per the PAM
i think it wouldve been beta tested for the last 6 months at least
one might fond some customer specific SCM 2007 notes and that might give an idea of the customers who are using it - nestle/ HP??.... am guessing

Implementation and support

what is the roles of abap developer in implemaentation and support .

hi Shankar,
ABAP Development, Implementation, and Support
The ABAP Developer will be responsible for the design, coding, testing, implementation, and support of SAP ABAP programming. This person will provide a solid understanding of the ABAP Workbench, including design, coding, testing, implementation, and support of ABAP-related tools. The Lead ABAP Developer will also provide strong expertise in the following ABAP tool sets: ABAP List Processing, including reporting, query tools, logical databases, list design, and control level processing; ABAP transaction processing, including screen objects and controls; SAPscript / SmartForms / Form Design; ABAP user exits; IDOC technology; and ABAP interface programming to and from other systems, including support and maintenance of the IM/3 tool.
The Lead ABAP Developer will work in conjunction with Business Analysts and Project Leaders to define needs, and to write technical and functional specifications. This person will guide and mentor other ABAP Developers, provide level 2 support, participate in unit and integration testing, act as a technical liaison, and coordinate ABAP-related issues during SAP release / version upgrades.
Reward if helpful.
Thankyou,
Regards.

Difference between implementation, support & upgradation projects

Hello Friends,
I am new to SAP. Can anyone tell me what are implementation, support & upgradation projects..what are the differences between those projects? what is role of ABAP developer in these projects?
Regards,

Hi,
SAP Implementation: SAP Implementation is the whole of processes that defines a complete method to
implement SAP software in an organization. It is based on best practices and case studies from various
literature sources and presents a collection of processes and products that make up a complete
implementation method to allow any organization to plan and execute the implementation of SAP (ERP)
software.The SAP implementation process is made up out of four main phases, i.e. the project preparation
where a vision of the future-state of the SAP solution is being created, a sizing and blueprinting phase
where the solution stack is created and training is being performed, a functional development phase and
finally a final preparation phase, when the last tests are being performed before the actual go live.
ABAP Developer Role is to prepare the Technical Specification (based on a Functional Specification given
by a Functional Consultant), build the code, Review the code and finally to prepare the Unit Test Cases.
Sometimes ABAPer may be asked to do a technical research for an optimal solution.
SAP Support: After a go live, the application needs a maintenance/support to resolve the issues/tickets raised by the users when using the application.Ticket is like a request for changes/bug fixing or a request for a new
ABAP Developer Role includes bug fixing/change the existing code due to new requirements/build a new code etc.
SAP Upgrade: SAP Upgrade is nothing but upgrading the software with a superior version which has got more advantages when compared to the earlier version.
ABAP Developer Role is to go through transactions SPAU/SPDD to compare the old and new version of the change and finally need to activate the relevant one.Some times might need to work on SAP notes too.
Hope this helps.
Thanks,
Srinivas

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

I've just bought an new laptop and downloaded itunes. I plugged in my iphone and upgraded to the newest itunes/ synched etc. Now I have no music or apps on my phone. The contacts photos and texts all seem fine. Just the itues stuff that's missing.

I have just bought a new computer and downloaded itunes. I plugged in my iphone and upgraded to the newest itunes/ synched etc. Now have no music or apps on the phone. Contacts, texts, photos all fine. Just all itunes content that is missiing. It isn't showing in my itunes account on my computer or on my phone. Any idea how to get it back? (No point synching with itunes on my computer as it isn't there either!)

I suggest copying your entire iTunes library to your new computer, also you might want to copy the photos you want to save. Then sync your device to the new iTunes and copy over your music, documents and photos that you want.
If you are no longer going to use the old computer you should open up iTunes on the old computer and use the menu to deauthorize it. Be sure to use the same iTunes menu on your new computer to Authorize the new one.

How can I restore my iTunes library via Time Machine after an erase/install and upgrade to Snow Leopard?

Actual problem:
I reinstalled all my programs that I need without a hitch. Meanwhile, I've been trying to recover the few files (mostly music) I actually store on my computer's hard drive as opposed to on my external HDs. I use one external HD for my graphic files and the other is strictly for Time Machine backups. I tried to recover my iTunes music, but I got a message that says: "The file: "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." I restored (I thought) my iTunes library Username/Music/iTunes." Additionally, I was going to upgrade to Mountain Lion, but I have seen that there were issues with Lion and iTunes libraries so I'm a little wary of this.
Excuse the long explanation, but I figure the problem may possibly be in the details of the weeks prior this problem:
I have recently been having issues with my iMac. I brought it in to see a Genius twice within the past month and they couldn't seem to find the problem. (It would restart Finder of it's own accord while I was using Adobe CS programs) I figured it was worth backing everything up via Time Machine and doing a complete erase/install/factory reset. I did so and had a problem again, and brought it in again, third time. The Genius did another diagnostics tests and found nothing and said my erase/install probably did the trick, but time will tell. I am, after the erase/rewrite and upgrade running Mac OS X 10.6.3 and previous to this was still running Tiger.

So, I didn't update iTunes and the rest of it after installing Snow Leopard. My stupidity, I figured that the OS was more up to date than the one I had previously so that all the programs that come with it probably were more current than the ones I was using. However, now that I have updated all my software, I am still getting the same message from iTunes that I was previously. I cannot open iTunes at all, same "The file: "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." message. I'm confused again. Checked a few other threads and whatnot and cannot seem to figure this out.

How to open and upgrade Keynote 08 presentations

Hello,
The new keynote can not open presentations saved with keynote 08. It asks for the presentation to be first opened in keynote 09.
The thing is, I don't have Keynote 09, and only the newest version is available from the app store.
So I can I open and upgrade my keynote 08 presentations ?
Thanks

MPSeevinck wrote:
Hello,
The new keynote can not open presentations saved with keynote 08. It asks for the presentation to be first opened in keynote 09.
The thing is, I don't have Keynote 09, and only the newest version is available from the app store.
So I can I open and upgrade my keynote 08 presentations ?
Thanks
The latest version of Keynote, 6.5 running in Yosemite can open all previous versions of Keynote.

Quicktime for Windows -- on Vista -- opens a .mov movie once, then won't open the move and Quicktime won't even open itself. I've installed the latest version, and upgraded it to Plus as well.

I am having trouble opening .mov videos with Quicktime on my PC with Vista. I installed the latest version of Quicktime for Windows (V.7.7), and upgraded it to Pro. It will open a .mov file once, then after that it will not open any .mov file and in fact, when I try to open the Quicktime player it will not open itself. If I switch users to Admin, it all works fine, but when I go back to my regular role (where all of my preferences and programs are there for me to use), the same thing happens. An .mov file will open once, then never again, and the Quicktime player seems to be disabled.
I've tried different .mov files, so it's not a corrupt file that's the problem. And, in the past (a couple of Quicktime versions ago, I guess), all of this worked just fine.
Any helpful suggestions would be appreciated!

I have the exact same problem. They play on my Mac under Snow Leopard. Transfer to Vista gets a window with black and white and some other noise. No sound either.

BO XI 3.1 installation and Upgrade activity Steps

Hi Experts,
Right now we are using BO XI R2 Version, Planning to uninstall XI R2 and do a fresh installation of BO XI 3.1 with SP3.
Do I need to install the Java latest version for XI 3.1? Right now we have the following setting,
         j2re1.4.2_04
         j2re1.4.2_16
         jre1.5.0_14
Since the up gradation of Reports, user, groups, universe events etc are from XI R2 version to XI 3.1.So Is it enough to
install BO XI 3.1 with SP 3, or do I have to go for FixPack inorder to avoid problem after this upgrade activity.
Could you please tell me about the BOXI R2 to XI 3.1 installation and Upgrade activity Steps.
Regards,
Sridharan

Hi,
you dont need a special JRE version on the Server. With the installation of BO a own JRE will be installed for BOE. Only for developing WebI reports the developer need a 1.6.x JRE later on.
There is already FixPack 3.1 out but installing "only" SP3 should be sufficient.
I would recommend you check the upgrade guide from Rel.2 to XI 3.1:
https://websmp208.sap-ag.de/~sapidb/011000358700001646952008E/xi3-1_bip_upgrade_en.pdf
You need a S-User to Login.
Regards
-Seb.

HT1338 when i try and upgrade my macbook pro with retina i get an error message that is not compatible

when i try and upgrade the OS on my new macbook with retina i get an error message that it is not compatable

Hello, i have the same problem i have my brand new MacBook Pro retina display with mountain lion, but i can´t upgrade any app or installing from App Store, because all that app are compatible with 10.8.2 and not with 10.8.1 i ´ve been downloaded the upgrade from this link http://support.apple.com/kb/DL1581?viewlocale=es_ES, and i try to install it and they said that my Hard Disk is not compatible with this software. ***!!!! is the last new machine and i can´t upgrade!!!! please i need a solution, or a link whatever. i tried to re-install the mountain lion and is the same problem, today at the afternoon i will try with my time machine hard drive to see what happened beacuse in my ex macbook air 2012 i have the last O.S.

I have ios7.1.2 on my iphone and am trying to upgrade to 8.0.2. I haven't installed 8 yet and when I try and upgrade nothing happens. It says just the improvements from 8 are available but not the whole ios. What to do?

I have ios7.1.2 on my iphone and am trying to upgrade to 8.0.2. I haven't installed 8 yet and when I try and upgrade nothing happens. It says ios8.0.2 improvements from 8.0.1 are available but not the whole ios. What to do?

It sounds like maybe 8.0.1 has downloaded onto your phone but not installed. You can check for it in Settings > General > Usage > Storage, Manage Storage. If it's there you should see it at the top of the list of apps. Swipe to delete it. 8.0.1 was pulled by Apple quickly after it was introduced due to issues and replaced by 8.0.2. Once it's deleted you should be able to download and install 8.0.2.

Implementation and upgrade

Similar Messages

Maybe you are looking for