Implementation issues in sap/bw

Hi,
This is srinivas can any one help me in telling what type of issues we will face in implementation project and can any one can send some scenario on cube and ods and multi-provider and infoset. please send me some issues in transporting and what type of issues we will face in implementation and answers for error4,error9 with solutions in sap/bw.
Regards,
srinivas.

These might be due to different reasons need to chk in ST22 for more details..anyway i am listing some
error 4
We will get this error when your flat file is opend and at the same time you are trying to load it, for this you have to close your file and reload it.
or
For invalid chars in the records then u can Go to PSA and edit the error record or go to RSKC and accept the special characters.
Error 9
This is due to timestamp then Replicate the data source and in se38 give RS_TRANSTRU_ACTIVATE_ALL for source system
Or
In ODS activation
Implementation issues
http://help.sap.com/bp_biv170/documentation/SolutionScope_EN.doc
http://help.sap.com/bp_biv235/BI_EN/documentation/BWProjectPlan_EN.mpp
Lifecycle Implementation
Regards,
B

Similar Messages

Critical Issues During SAP Implementation or After Golive

Can anybody tell me one of the most critical/ challenging issues During SAP Implementation or After Golive
in these modules:-
MM implementation
PP implementation
SD implementation
FI/CO implementation
PS implementation
QM implementation
HR implementation
BI implementation
XI implementation
Thanks and regards
RS

hi,
I will list out few of critical issues in
Implementation :
1 . Ensure 100% mapping of business process for all modules with SAP(avoid customization in support phase)
2. Unit & Integeration testing should be through with all validations
3. Master datas(Vendor,Customer) care must be taken will uploading datas thru LSMW,
If there are common vendors for all plants,Create a vendor for a plant extend it to other plants
4. Check tax procedures are customized according to requirements.
5. Complete all print document customizations before go live
6. Complete end user training(2 or more cycles) should be top priority before go live(This will avoid
cancellation/reversal of documents after post go live)
7. Ready with standard MIS reports & customized reports for business decision making
8. Excise opening balance updation in tables for RG1 register in tables(Note 951955) on go live
9. Check all tables datas are updating correctly
10. Declare go live to SAP Support
11. Check All user authorization should be correct according to their roles.
12. Centeralize all master datas creation(avoid duplication)
13. Create transaction variants to avoid entires in unnecessary fields & make certain fields mandatory.
14. Ensure document numbering is completed for all documents
15. Validate accounting entries are hit properly according to requirement in quality client with FI CTM(Core team member).
After Go live :
1. Missing authorization for users will play key part here,For ex : PGI while doing delivery,Excise capture & post in MIGO/J1IEX.
2. Do internal audit every month,identify transactions if there will possibility for misuse or wrong entries,requires validation,identify users weak in certain areas.
3. Identify there is enhancements to be done in transaction process(By step-2)
4. Prepare a list of month & year end activities to be performed for all modules give to users
5. Prepare a list of frequently used transaction codes module wise give it to users
6. If there is subcontracting,ensure challan creation,GR,reconcillation should be done regulary(monthly)
7. Train the users,take reports in respective modules.
8. Additonal customization might be done in print documents.
9. Instruct users/CTM's to adapt SAP Standard practise
10. Update excise tax rates after every indian budget
Hope it helps.
Edited by: Jeyakanthan A on Apr 29, 2010 6:48 PM

Performance issues with SAP BPC 7.0/7.5 (SP06, 07, 08) NW

Hi Experts
There are some performance issues with SAP BPC 7.5/7.0 NW, users are saying they are not getting data or there are some issues while getting data from R/3 system or ECC 6.0. Then what things do I need to consider to check, such as what DataSources or Cubes I need to check? So, how to solve this issue?
What things I need to consider for SAP NW BI 7.0 u2013 SAP BPC 7.5 NW (SP06, 07, 08) Implementation?
Your help is greatly appreciated.
Regards,
Qadeer

Hi,
New SP was released in February, and now most of the new bugs should been caught ,This has a Central Note. For SP06 it's Note 1527325 - Planning and Consolidation 7.5 SP06 NetWeaver Central Note to fix any issues. Most of the improvements in SP06 were related to performance, especially when logging on from the BPC clients.There you should be able to find a big list of fixes/improvements and Notes that describe those. Some of the Notes even have test description how to reproduce that issue in the old version.
hope this will help you
Regards
Rv

Issue in SAP CPS for Job Interception

Issue in SAP CPS for Job Interception
Scenario:
After triggering a Process Chain in BW and maintaining the Job Interception settings in SAPCPS(Redwood)
(so that any job which triggers in BW by that Particular User is intercepted and not let it proceed further until the job is released in SAP CPS.)
Issue:
The Jobs are getting into Waiting status in SAP CPS(Redwood) even though there is no progress in loads in BW side. Also the Jobs are in Intercepted state even after releasing the Parent Job in SAP CPS(Redwood).
Please let us know how to go about it.

Hi Ramesh,
What you plan to do is called monitoring of process chains (ie. process chains not started from CPS) and this should be available in the latest version of CPS.
This requires the interception of only the BI_PROCESS_TRIGGER process, just as you have configured now, and other than that the following prerequisites:
SAP Note 1080558 describes the SP levels for the BW/BI releases
XBP 2.0 or higher
Redwood transport files must be loaded
ProcessServerService.SAP.XBPVariant license key
Maybe this helps,
Anton.

Implementing UCES in SAP ISU- IDES system

Hi,
We are interested to implement UCES in SAP ISU - IDES system which we have for our internal competency and Customer POCs/Demos. ( ECC 6 with ISU)
Could any body please share their experience or knowledge on this, that would be of very helpfull.
Many Thanks
Raja

Hi,
There is something called UCES - Biller Direct where is there is an Interaction Between SAP Biller Direct and Contract Accounts Receivable and Payable.
Purpose:You should use SAP Biller Direct if you want to present information about customer accounts in your Internet portal and offer your customers the option of paying bills or of creating inquiries and complaints via the Internet.
Implementation Considerations : Your customer does not need to install any SAP software to be able to use SAP Biller Direct. All functions can be carried out using a standard Web browser.
Information on the necessary system requirements and the browsers supported by SAP Biller Direct can be found in the introductory sections of the installation guide.
SAP Biller Direct consists of an application based on JavaServer Pages. The accounting system runs on a standard application server and is used as the back end for SAP Biller Direct. The transfer of data between the front end and back end is done by RFC and is ensured using the SAP Java Connector (JCO), which you install as part of the SAP middleware.
Award points if this is found useful.

Finding the modules implemented in a SAP system

Hi All,
Is there any way of finding the modules implemented in a SAP system?
Please reply.
Thanks in advance
Dhanapal S

Hi Dhanpal,
This is more of a functional question than a technical question. But if you can give a list of all the modules that you would like to know about, then it may be possible to get fair idea of which of them have been implemented.
For example, if you'd like to know whether SD is imploemented or not, you would look for data in tables like TVKO, VBAK, VBAP etc.,
In case of HR, you will see if there are any infotypes being used. for example tables PA0001 etc.,
In case of MM, you will look at tables like MARA etc.,
These points are by no means comprehensive. There are so many other factors that neeed to be considered. For example, if SD is implemented, then in general MM will also be implemented (may not necessairly be the case, but this is common).
The point is that we examine the Customizing Data and Master Data for each of the modules and figure out if it is being implemented.
But the easiest way is to ask the customer which ones he is implementing.
Regards,
anand Mandalika.

Pre-requisites to implement PLANNING through SAP BPC

Hi,
Would like to know the pre-requisites to implement PLANNING through SAP BPC 7.5.
Please help.
Regards,
Deepankar Jain

Hi Raghu,
I have the below scenario:-
The thing is that R/3 team is implementing FICO right now and BPC for Planning only needs to be implemented parallely.
Client would have the Actual figures but not in SAP. so is it possible to go for it in this scenario.
Regards,
Deepankar Jain

Extraction issue after sap note

Hi Experts.
After applying sap note 1331090 to fix a program error while running extractoru2019s, one issue was solved but another one came up.
Now when a datasource is executed it appears to run without problems, but no data is extracted, it finishes successfully with 0 records, even when there´s data to extract. This happens for all datasources generated for our planning area.
Someone ever saw this issue?
Thanks in advance,
TP

Hi,
You could have missed some other Sub notes of this main note which you have mentioned. Kindly go through the note carefully and reapply the same.Still if you face the problem then I suggest you raise the issue with SAP.
Thanks,
Harsh

Required Implementation Guide for SAP Netweaver BI

Hi,
I need an Implementation Guide of SAP Netweaver BI.
Thank you,
Best Regards,
Shailu.

hello,
as i said please search in SDN.
BI 7 Blogs: Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
Installation Info: https://websmp205.sap-ag.de/installNW70
Troubleshoot BI 7 frontend installation: Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
Installation & Upgrade guides: https://websmp206.sap-ag.de/instguides
https://websmp205.sap-ag.de/~sapidb/011000358700005412792005E.pdf
Check some more info at:
Re: Urgent Help: Configuration Documents & Blue Print Documents for BI & BW
BI 7 User Guide
Regards,
Dhanya

BW Analyzer 3.x issue with SAP 7.1 Gui

BW Analyzer 3.x issue with SAP 7.1 Gui
After executing a BW worksheet and then "Selecting Filter Value" on a free Characteristic, The "Select Filter Value" Window pops up, but when you add or remove a characteristic it pops back to its original position. If you try a second time, the characteristic will stay, but when you click "OK" to re-execute the report the "Select Filter Value"Window does not close.
When you try to close the "Select Filter Value" Window, Excel error out and shuts down

Have you looked at OSS Notes. This may just be a 3.5 Analyzer ith a BI 70 server issue, or did this only begin to happen with a upgrade to e 7.10 gui?
The whole area of filters and variables with 3.5 Analyzer with BI 7.0 server has been shaky, so I'd look for Notes before I go down any reinstallion path.

Implementation Guide for SAP EWM

Friends,
I need to find Implementation Guide for SAP EWM ver urgently. I am not sure where is the guid. If any one of you have used it, Can you please send the link or address.
Thanks.Raj

Rajshekar
I think that you have had the answer to your question. I am trying to get people to keep the forum tidy. If you have what you require could you award you points if you want to and mark your question as answered.
This helps everybody as there are at the moment 48 pages of open questions and if people do not close them the forum will grow and then people like me will not go through all of the pages as it takes too long and some people will not get answers to their questions.
Thank you
Frenchy

Implement and Reverse SAP Note in 4.0B

Hi All,
How do you implement and reverse SAP Note effects in version 4.0B?
For example, OSS Note 160970.
Thanks.
Tyken

Sadly it's not available until 4.5B, and only then as an add-on.
Back in the bad-old-days a note had to be applied manually by a developer, following the instructions in the note, looking at the context code around the changes and trying to type everything in without making mistakes.
And you have to check for dependencies as well.
Good luck.
Nick

Credits & lock box issues in SAP XI

Hi All,
what is the credits & lock box issues in SAP XI....? can any body explain me in detail and how to solve all these credits and lockbox issues...
Thanks
Sudheer

Sudheer,
I dont think you have any issues with these files. These files are sent to the Bank. Just google for help on these files. If you are expecting in detail explanation then I think you should give us few inputs.
Regards,
---Satish

ASAP Implementation Roadmap for SAP Exchange Infrastructure

Does anyone know if the "ASAP Implementation Roadmap for SAP Exchange Infrastructure" is still available somewhere?
I'm looking for templates for documenting XI flows.
thanks!

hi,
try this link:
https://websmp109.sap-ag.de/~sapidb/011000358700004919702004E
Regards,
Michal Krawczyk
http://mypigenie.com - XI/PI FAQ

Alignmnet Issues with SAP Script

Hi All i have an issue with SAP script i have few columns in the script where in the values in the column changes dynamically.For example the value of second column in the first row can be 5 characters and the value of the same in the 2nd row can be of 10 characters and it keeps varying for every row but the max length of it would be 20 characters.
Now the issues is with the second column as the text in this column keep varying the text in the same row after the second column keep moving either towards right or towards left depending on the text in the second column,Can any one help me as how can i fix this issue.
Looking for your valuable inputs.
Regards
Hari Krishna.

Hari,
http://help.sap.com/saphelp_47x200/helpdata/en/d1/802d91454211d189710000e8322d00/frameset.htm
Even though it is not the solution,I guess this link will be helpful.
K.Kiran.

Implementation issues in sap/bw

Similar Messages

Maybe you are looking for