Implementation of BW3.5 or BI7.0
Hi Guys..
Our company is going to implement BW. Now our management got stuck that weither we go for Implement BW3.5 or go for BW(BI) 7.0.
As, we got the response from some of the company that BI7.0 is not stable much, there is not much support from SAP & even in the market there are not people expertise much in BI 7.0.
Please advise me, that weather we should go for implement BW3.5 or BI7.0. Which one proves to be more stable,cost efficient & got support from all sense.
Your early feedback will be highly appreciable.
Thanks
Santosh Khare
Dear Rocky,
I dont agree with ur comments that BI 7 is not stable as we have already implemented BI7 at Our Place and it is working fine without any troubles. There are so many new features available which are not there in BW.
Even if u implement BW then later on u havge to go for the upgradation so if u implement BI 7now itself. it will be better.
Even Sap also supporting fully as its their baby.
Regards
venu
Similar Messages
-
Work book size increased by 4 times after migrating from BW3.5 to BI7
Hi Experts
work book size increased by 4 times after migrating from BW3.5 to BI7
our client runs the report using BI web report and exports to excel sheet.
she asks us to investigate why the size of the work book isincreased by 4 times after migrating from BW3.5 to BI7.
please let me know what you think.
thank you for reading this.
Regards
satishANY suggestion would be greatly appreciated
-
How to migrate the Workbooks from BW3.1 to BI7
Dear Team,
How to Migrate the workbooks from Bw3.1 to BI7. We have recently upgraded to BI7. What are necessary steps and necessary cares needs to take for this.
Best Regards,
SGMigration is manual. When you open up a 3.x component in a 2004s tool in migrates it. There is no automatic migration available
Rolling out the New SAP NetWeaver 2004s BI Frontend Tools
Migrating Advanced BEx Analyzer Workbooks - What VBA is Supported?
Hope it Helps
Chetan
@CP.. -
Query Migration from bw3.5 into BI7.0
Hi friends,
I need to run the queries in BI7.0 which are in BW3.5. How can we do this and what are the prerequisites.
Thanks&Regards
Shaliny M.Hi,
Chk out this link....
/message/1969749#1969749 [original link is broken]
/message/2324740#2324740 [original link is broken]
All the queries will work if the peratining objects exists in the warehouse. Other than this there aren't any spl measures that actually needs to be taken care to while running the query on BI 7.0, to my knowledge.
Happy Life,
Aravind -
Regarding the upgradations from the bw3.5 to bi7.0 reporting
Hi Experts,
Can any one help me how i have to upgrade the reporting tool from the sap-bw 3.5 to sap-bi7.0 . right now allready we are having the sap-bw 3.5 version right now i want to upgrade it to the sap-bi 7.0 .I need clearly with the help of the steps.
Bye.Hi Vijay,
please check the following links:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6a19f233-0e01-0010-6593-c47af5a8df3b
https://www.sdn.sap.com/irj/sdn/event/webinars?rid=/library/uuid/90d58e76-e1b0-2a10-8b89-af8ceacf4b09
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
/message/2082536#2082536 [original link is broken]
Regards
Erwin
Edited by: Erwin Buda on Feb 9, 2009 11:35 AM -
Difference in Data Sources in BW3.5 and BI7.0
Hi Experts,
what is the difference between BW3.5 Data Source and BI 7.0 Data Sources
<removed by moderator>
Regards
Vijay
Edited by: Siegfried Szameitat on Nov 12, 2008 3:27 PMHi,
please use the search before posting --> search the forums, the internet, sap help.... You will find the information you want. Questions like yours are too general and so against the rules. Additionally they will motivate others to post tons of links which is also against the rules. Feel free to ask in case you have a specific question.
Happy posting with following the rules.
Siggi -
Abap routines from bw3.5 to bi7.0
Hi,
As you might aware that in BW3.5 , ABAP procedure language is used and in 7.0. ABAP OO.
when we try to migrate ABAp procedure language update rules to ABAP OO, would system convert them automatically or do we have to migrate each routine manually. I understand that certain abap statements that are in ABAP procedure language will not be suitable in abap oo?
Does any one have list of abap procedure language statements that do not work in ABAP OO?
Thanks
VennelaHi,
If you migrate them, it will automatically get converted.
Regards
Sathiya -
Diff between BW3.5 n BI7.0
hello experts!
can any one tell me abt wot r the changes that r made to BW to become BI
n
wot is netweaver 2004 n ECC
how does this help to BI
n
wot r the major diff between BI n BW,
thnx
gagan deepHi Gagan,
Welcome to SDN...
Thare is a lot of change between 3.5 and BI7
NW2004s Concepts
New NW2004s Data flow
R/3---->PSA only (using Infopackage) for all the Loads -Mandatory
PSA -
>ODS/Cube -->load using DTP ,create transformation first
No Datamart architecture in NW2004s
so ODS -
>Cube load using DTP ,creating transformation first
Once loaded to PSA in DTP you have the option of FULL or DELTA ,full loads all the data from PSA and DELTA loads only the last load of PSA.
Go through the links for Lucid explanations
Infopackage -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03808225cf5167e10000000a1553f6/content.htm
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
Pre-requisite-
You have used transformations to define the data flow between the source and target object.
Creating transformations-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
ODS to Cube -
http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/dc87c1d711f846b34e0e42ede5ebb7/content.htm
Assign points if this helps.
Regards,
Anil -
hi all,
now i am upgreding all info objects,infosorces,datatargets from 3.5 to bi7.can any one help me how to to achive this,if any docs are there plz let me know.
thanking u,
regards,
vastav.Hi Sri Vastav,
Check this- how to on BW 3.x Upgrade Checklist
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/ee14e25d-0501-0010-11ad-8eb2861a7ec0 [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20bw%203.x%20upgrade%20checklist
Please check this link and you will find all Upgrade guides
https://websmp209.sap-ag.de/instguides
Also Check this,
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
this is a good PDF on Upgrade from BW 3.5 to BW 7.0
latest on upgrade tp BI7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
http://help.sap.com/bp_epv170/EP_US/Documentation/How-to/Planning/Master_Guide_NW2004s.pdf
You can seek more information on BI 7.0 in the SAP NetWeaver2004s Ramp-Up.
/community [original link is broken]
Hope This Helps.
Regards,
Ravikanth -
Issue w RSCUSTV23 Analysis Authorization System after upg from BW3.5 to BI7
We set it to "Obsolete Concept with RSR Authorization Objects" and we do no understand why from the suddenly changes to
"Current Procedure with Analysis Authorization" from no where - any ideas why from the sudden this changes by itself?
still were not not migrating our security to the new version...we will do it around april...but in the meanwhile i would like ot understand why is happening by itself.
thanks,Note that the logging will probably only help you if you activate it in the transport tool profiles (STMS) as it sounds to me as if imports of the customizing are making this setting.
Did you set the value in DEV and transport it through or did you use one of the "BW utility reports" to change it (in which case you do not always have change documents and inconsistent customizing is "by design"...).
Cheers,
Julius -
BI7.0 and BW3.5 differences
Hi All,
I am going to work in BI 7.0, some one explain the differences of the bw3.5 and bi7.0, what are the main changes in bi 7.0 any relevant documents have please forward to this mail id :
Thanks& Regards,
KrishnaHi Krishna,
Some features of BI 7 are
1. In Infosets now you can include Infocubes as well.
2. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
3. The BI accelerator (for now only for infocubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accl is a separate box and would cost more. Vendors for these would be HP or IBM.
4. The monitoring has been imprvoed with a new portal based cockpit. Which means you would need to have an EP guy in ur project for implementing the portal !
5. Search functionality hass improved!! You can search any object. Not like 3.5
6. Transformations are in and routines are passe! Yess, you can always revert to the old transactions too.
check these link's
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
In this one - check out slides 28-34
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd64196ec6b
Check this link to get PDF doc on SAP BI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
Here is a powerpoint overview with illustrations of the differences between NW2004s (BI 7.0) and BW 3.5.x
http://csc-studentweb.lrc.edu/swp/Berg/Articles/NW2004s_what_is_new.ppt
check the presentaion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
http://csc-studentweb.lrc.edu/swp/Berg/BB_index_main.htm
http://csc-studentweb.lrc.edu/swp/Berg/articles/NW2004s_what_is_new.ppt
Web Blogs & Threads in SDN
/message/502929#502929 [original link is broken]
/people/sap.user72/blog/2006/01/27/sap-netweaver-bi-versus-sap-bw-the-sequel
Follow these links , which will show you what is enhancement of BI7.0 form BW3.5 and also what is new functionalities added in BI7.0 over 3.5
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/da/c91b42d10b5633e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/eb1442be645133e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/31/ec1342eb11de2ce10000000a1550b0/frameset.htm
Hope this helps.
Regards,
Ravikanth -
Delta not working after upgrade from 3.5 to BI7.0
Hello All,
We have recently upgraded from BW3.5 to BI7.0 and the standard delta is not working now after the upgade. The name of the Extractor is 0CRM_SALES_ACT_1.
Did anyone come across this problem before or can anyone suggest the solution.
Thanks
MadhuHi Madhu,
I've experienced a similar problem with this extractor. I attempted to Initialize Delta with Data Transfer to no avail. The job ran for 12+ hours and stayed in "yellow" status (0 records extracted). The following steps worked for me:
1. Initialize Delta without Data Transfer
2. Run Delta Update
3. Run Full Update and Indicate Request as Repair Request
Worked like a champ, data load finished in less than 2 minutes.
Hopefully this will help.
Regards.
Jason -
BW Upgrade from 3.1 to BI7.1
Hi,
we are planning to upgrade one of our BW3.1 to BI7.1 ABAP+JAVA system.I need some details about the BW upgrade before palnning.
Our BW current version is BW3.1(SAP BASIS 620)
Is it possible to upgrade BW3.1 ABAP system to BI7.1 ABAP+JAVA system in same upgrade tool?
Is it possible to upgrade BW3.1 to BI7.1 directly?
or do i need to upgrade first BW3.1 to Bw3.5 and then BW3.5 to BI7.1?
Thanks in advance.
VijayI dont think 3.1 had JAVA comnponents - you would have to necessarily go for a separate stack install..
The path would be :
Upgrade 3.1 kernel to 640
Upgrade to 7.1
Install and configure the JAVA Stack - you could have the JAVA WAS running on the same server if required - but your server has to be sized for the same.
You will have to install the JAVA stack separately...
else..
Upgrade to 3.5 - install the JAVA components
Upgrade to 7.1 as a dual stack - but this would mean that you will have to test and validate the 3.5 upgrade first.
Edited by: Arun Varadarajan on Oct 14, 2010 8:27 PM -
Issue while reporting on 0LANGU infoobject in BI7.0
I am facing a issue where in i have created a infoobject referencing InfoObject 0LANGU.After assigning 0LANGU InfoObject as inprovider i am trying to create a report in BI using query designer but unable to view the values of the infoobject.The query results in a exception message.
Can anyone help us with this.Hi Edwin
RSRV shows no error for both 0LANGU and the reference IO created Z_LANGU.By default 0LANGU is marked as 'attribute only' which should not be the problem as it works fine in BW3.5 but BI7.0 it is giving a error.
In query designer when i try to open the Z_LANGU characteristics values in left pane the system hangs and gives a dump after sometime. -
Modify Context Menu BI7.0
Hi,
I want to modify the context menu in the WAD, so that it includes SAVE rather than having this attached to a button.
I know I can modify the context menu in BW3.5 by using SAPBWAddToMenu and a combination of javascript and html.
I know in BI7.01 (EHP1) the option for SAVE, REFRESH etc is already in the context menu and it can be modified by using SAPbi_AddToMenu.
But in BI7.0, there is no help for modifying the context menu using javascript, this section doesn't exist.
We are currently on BI7.0 SP23, I have tried both SAPBWAddToMenu and SAPbi_AddToMenu, but both give errors in the webtemplate and the context menu does not work at all. It seems as though from BW3.5 to BI7.01 the option has been disabled.
Has anybody managed to modify the context menu of the WAD in BI7.0?
Thanks
DJLDid you have a look at this help-sap-com entry?
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/e073a356e32972e10000000a42189b/frameset.htm]
Reading your answer again, I see that you refer to BI 7.00 without any EHP.
So you might want to try using your own context menu as per [http://help.sap.com/saphelp_nw70/helpdata/en/43/152fa54b315a38e10000000a422035/frameset.htm] .
Edited by: Frank Besler on Aug 10, 2011 11:08 AM
Maybe you are looking for
-
How to find out the activation log for a info* from Business content
Hi, I work in a BW 3.5 environment where a lot of projects are being done simultaneously and a lot of Business content are getting activated. BW often activates a lot of other objects when a certain section of seemingly unrelated Business contents
-
Javascript API: how can I jump to library from custom store page?
I have custom store page, and I want to show library page and initiate the download process when user hits download button on custom store page. How can I finish these functionalities with Adobe DPS Javascript API V2? Thanks.
-
OBI Apps7.9.6.1 new AP holds subject area
I have a scenario to build the new subject area for the AP holds information along with some other AP and supplier information. Please advice me about the join conditions for the AP holds with these tables.. 1)AP_INVOICES_ALL 2)AP_INVOICE_DISTRIBUTIO
-
Hi, I'm sending an Idoc named HRSM_D01, for inbound time data to HR. However we don't understand why sometimes it populate only the table PTEXDIR and some other times the tables PTEXDIR and PTEX2000. Can you guys explain me this Time inbound interfa
-
How do I get frame commands when I right-click?
For some reason I thought there used to be a way to right-click a frame on a website, and from the menu that opens you could choose to view only the frame you right-clicked over, even possibly print only that frame or open it in a new window. I've lo