Implementing ALG with UC520

Our SIP providers is saying we should configure our UC520 to communicate with their proxy sip devices for more security between us and them. can anyone give me an ideas of how to configure ALG from UC520 to a SIP proxy. The current setup works fine but our access lists on the SIP lines are preventing some hosts to connect to us so we had to remove the ACLs reducing security. So in place of that we like to implement ALG with UC520. Is this even possible?

Wrong forum, should be "Ip telephony", or "small business, uc500".
Anyway, SIP ALG is automatically enabled when NAT is used. When NAT is not used, SIP ALG is not applicable.

Similar Messages

How to implement classes with alv's

hi
how to implement classes with alv's

Hi Jyotsna,
check this example codes.
*"Table declarations...................................................
TABLES:
EKKO, " Purchasing Document Header
CDHDR, " Change document header
SSCRFIELDS. " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
S_EKGRP FOR EKKO-EKGRP, " Purchasing group
S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE. " Creation date of the change
" document
*" Data declarations...................................................
Field String to hold Purchase Document Number *
DATA:
BEGIN OF FS_EBELN,
EBELN(90) TYPE C, " Purchase Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
" the Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header *
BEGIN OF FS_EKKO,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor *
BEGIN OF FS_LFA1,
LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
NAME1 TYPE LFA1-NAME1, " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user *
BEGIN OF FS_CDHDR,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
OBJECTID TYPE CDHDR-OBJECTID, " Object value
CHANGENR TYPE CDHDR-CHANGENR, " Document change number
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
END OF FS_CDHDR,
Field String to hold Change document items *
BEGIN OF FS_CDPOS,
OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
OBJECTID(10) TYPE C, " Object Value
CHANGENR TYPE CDPOS-CHANGENR, " Document change number
TABNAME TYPE CDPOS-TABNAME, " Table Name
FNAME TYPE CDPOS-FNAME, " Field Name
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name *
BEGIN OF FS_DATAELE,
TABNAME TYPE DD03L-TABNAME, " Table Name
FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element *
BEGIN OF FS_TEXT,
ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid *
BEGIN OF FS_OUTTAB,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
WERKS TYPE LFA1-WERKS, " Plant
NAME1 TYPE LFA1-NAME1, " Name1
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number *
T_EBELN LIKE STANDARD TABLE
OF FS_EBELN,
Internal table to hold Purchase Document Header *
T_EKKO LIKE STANDARD TABLE
OF FS_EKKO,
Temp Internal table to hold Purchase Document Header *
T_EKKO_TEMP LIKE STANDARD TABLE
OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor *
T_LFA1 LIKE STANDARD TABLE
OF FS_LFA1,
Internal Table to hold Change date and the name of the user *
T_CDHDR LIKE STANDARD TABLE
OF FS_CDHDR,
Internal Table to hold Change document items *
T_CDPOS LIKE STANDARD TABLE
OF FS_CDPOS,
Temp. Internal Table to hold Change document items *
T_CDPOS_TEMP LIKE STANDARD TABLE
OF FS_CDPOS,
Internal Table to hold Data Element Name *
T_DATAELE LIKE STANDARD TABLE
OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name *
T_DATAELE_TEMP LIKE STANDARD TABLE
OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element *
T_TEXT LIKE STANDARD TABLE
OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid *
T_OUTTAB LIKE STANDARD TABLE
OF FS_OUTTAB.
C L A S S D E F I N I T I O N *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables *
DATA:
W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
W_VALUE TYPE EKKO-EBELN, " Reflected Value
W_SPACE VALUE ' ', " Space
W_FLAG TYPE I, " Flag Variable
W_VARIANT TYPE DISVARIANT, " Variant
ALV Grid
W_GRID TYPE REF TO CL_GUI_ALV_GRID,
Event Handler
W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
Field catalog table
T_FIELDCAT TYPE LVC_T_FCAT.
AT SELECTION-SCREEN EVENT *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
START-OF-SELECTION EVENT *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
PERFORM DESCRIPTION.
END-OF-SELECTION EVENT *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
CALL SCREEN 100.
ENDIF. " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_HOTSPOT_CLICK
FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
PERFORM GET_CELL_INFO.
SET PARAMETER ID 'BES' FIELD W_VALUE.
CALL TRANSACTION 'ME23N'.
ENDMETHOD. " HANDLE_HOTSPOT_CLICK
ENDCLASS. " LCL_EVENT_HANDLER
*& Module STATUS_0100 OUTPUT
PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
CREATE OBJECT W_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = CL_GUI_CONTAINER=>SCREEN0
I_APPL_EVENTS =
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC 0
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT = W_VARIANT
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = T_OUTTAB
IT_FIELDCATALOG = T_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC 0.
ENDIF. " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form PREPARE_FIELD_CATALOG
Subroutine to build the Field catalog
<--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Vendor Name'(001).
LS_FCAT-SELTEXT = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Change Date'(002).
LS_FCAT-SELTEXT = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Modified by'(003).
LS_FCAT-SELTEXT = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
SELECT EBELN " Purchasing Document Number
ERNAM " Name of Person who Created
" the Object
LIFNR " Vendor's account number
EKGRP " Purchasing group
BEDAT " Purchasing Document Date
FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
WHERE EBELN IN S_EBELN
AND BEDAT IN S_BEDAT.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S401(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
SELECT OBJECTCLAS " Object Class
OBJECTID " Object value
CHANGENR " Document change number
USERNAME " User name
UDATE " Creation date
FROM CDHDR
INTO TABLE T_CDHDR
FOR ALL ENTRIES IN T_EBELN
WHERE OBJECTID EQ T_EBELN-EBELN
AND UDATE IN S_UDATE
AND TCODE IN ('ME21N','ME22N','ME23N').
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Header Not Found'(031).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EBELN IS INITIAL
ENDFORM. " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
SELECT OBJECTCLAS " Object class
OBJECTID " Object value
CHANGENR " Document change number
TABNAME " Table Name
FNAME " Field Name
VALUE_NEW " New contents of changed field
VALUE_OLD " Old contents of changed field
FROM CDPOS
PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
FOR ALL ENTRIES IN T_CDHDR
WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
AND OBJECTID EQ T_CDHDR-OBJECTID
AND CHANGENR EQ T_CDHDR-CHANGENR.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Item Not Found'(032).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP] = T_CDPOS[.
ENDFORM. " SELECT_CHANGED_VALUE
*& Form SELECT_PUR_DOC
Subroutine to select Purchase Order Details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
SORT T_EBELN BY EBELN.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
FS_CDPOS-OBJECTID BINARY SEARCH.
IF SY-SUBRC NE 0.
DELETE TABLE T_EBELN FROM FS_EBELN.
ENDIF. " IF SY-SUBRC NE 0.
ENDLOOP. " LOOP AT T_CDPOS...
LOOP AT T_EBELN INTO FS_EBELN.
MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
APPEND FS_EKKO TO T_EKKO.
ENDLOOP. " LOOP AT T_EBELN...
T_EKKO_TEMP] = T_EKKO[.
ENDIF. " IF NOT T_CDPOS IS INITIAL
ENDFORM. " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
SORT T_EKKO_TEMP BY LIFNR.
DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
SELECT LIFNR " Account Number of Vendor or
" Creditor
NAME1 " Name 1
FROM LFA1
INTO TABLE T_LFA1
FOR ALL ENTRIES IN T_EKKO_TEMP
WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
IF SY-SUBRC NE 0.
MESSAGE S002(M8) WITH 'Master Details'(033).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EKKO IS INITIAL
ENDFORM. " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
SORT T_CDPOS_TEMP BY TABNAME FNAME.
DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
SELECT TABNAME " Table Name
FIELDNAME " Field Name
ROLLNAME " Data element
FROM DD03L
INTO TABLE T_DATAELE
FOR ALL ENTRIES IN T_CDPOS_TEMP
WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
IF NOT T_DATAELE IS INITIAL.
T_DATAELE_TEMP] = T_DATAELE[.
SORT T_DATAELE_TEMP BY ROLLNAME.
DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
SELECT ROLLNAME " Data element
DDTEXT " Short Text Describing R/3
" Repository Objects
FROM DD04T
INTO TABLE T_TEXT
FOR ALL ENTRIES IN T_DATAELE_TEMP
WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
AND DDLANGUAGE EQ SY-LANGU.
IF SY-SUBRC NE 0.
EXIT.
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_DATAELE IS INITIAL.
ENDIF. " IF NOT T_CDPOS IS INITIAL.
ENDFORM. " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO BY EBELN.
SORT T_LFA1 BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
OBJECTCLAS = FS_CDPOS-OBJECTCLAS
OBJECTID = FS_CDPOS-OBJECTID
CHANGENR = FS_CDPOS-CHANGENR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
READ TABLE T_EKKO INTO FS_EKKO WITH KEY
EBELN = FS_CDHDR-OBJECTID
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
LIFNR = FS_EKKO-LIFNR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
TABNAME = FS_CDPOS-TABNAME
FIELDNAME = FS_CDPOS-FNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE T_TEXT INTO FS_TEXT WITH KEY
ROLLNAME = FS_DATAELE-ROLLNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
APPEND FS_OUTTAB TO T_OUTTAB.
CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM. " FILL_OUTTAB
*& Form GET_CELL_INFO
Subroutine to get the Cell Information
--> W_VALUE Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
IMPORTING
E_ROW =
E_VALUE = W_VALUE
E_COL =
ES_ROW_ID =
ES_COL_ID =
ES_ROW_NO =
ENDFORM. " GET_CELL_INFO
*& Form VALIDATE_PD_NUM
Subroutine to validate Purchase Document Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
SELECT EBELN " Purchase Document Number
FROM EKKO
INTO W_EBELN
UP TO 1 ROWS
WHERE EBELN IN S_EBELN.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E717(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EBELN[]...
ENDFORM. " VALIDATE_PD_NUM
*& Form VALIDATE_VEN_NUM
Subroutine to validate Vendor Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
SELECT LIFNR " Vendor Number
FROM LFA1
INTO W_LIFNR
UP TO 1 ROWS
WHERE LIFNR IN S_LIFNR.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E002(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_LIFNR[]...
ENDFORM. " VALIDATE_VEN_NUM
*& Form VALIDATE_PUR_GRP
Subroutine to validate the Purchase Group
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
SELECT EKGRP " Purchase Group
FROM T024
INTO W_EKGRP
UP TO 1 ROWS
WHERE EKGRP IN S_EKGRP.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E622(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EKFRP[]...
ENDFORM. " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM. " FILL_VARIANT
REPORT YMS_HIERSEQLISTDISPLAY .
Program with FM REUSE_ALV_HIERSEQ_LIST_DISPLAY *
Author : Michel PIOUD *
Email : mpioudyahoo.fr HomePage : http://www.geocities.com/mpioud *
TYPE-POOLS: slis. " ALV Global types
CONSTANTS :
c_x VALUE 'X',
c_gt_vbap TYPE SLIS_TABNAME VALUE 'GT_VBAP',
c_gt_vbak TYPE SLIS_TABNAME VALUE 'GT_VBAK'.
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max. "#EC NEEDED
PARAMETERS p_max(02) TYPE n DEFAULT '10' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_2 FOR FIELD p_expand. "#EC NEEDED
PARAMETERS p_expand AS CHECKBOX DEFAULT c_x.
SELECTION-SCREEN END OF LINE.
TYPES :
1st Table
BEGIN OF ty_vbak,
vbeln TYPE vbak-vbeln, " Sales document
kunnr TYPE vbak-kunnr, " Sold-to party
netwr TYPE vbak-netwr, " Net Value of the Sales Order
erdat TYPE vbak-erdat, " Creation date
waerk TYPE vbak-waerk, " SD document currency
expand TYPE xfeld,
END OF ty_vbak,
2nd Table
BEGIN OF ty_vbap,
vbeln TYPE vbap-vbeln, " Sales document
posnr TYPE vbap-posnr, " Sales document
matnr TYPE vbap-matnr, " Material number
netwr TYPE vbap-netwr, " Net Value of the Sales Order
waerk TYPE vbap-waerk, " SD document currency
END OF ty_vbap.
DATA :
1st Table
gt_vbak TYPE TABLE OF ty_vbak,
2nd Table
gt_vbap TYPE TABLE OF ty_vbap.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
v_2 = 'With ''EXPAND'' field'.
START-OF-SELECTION.
Read Sales Document: Header Data
SELECT vbeln kunnr netwr waerk erdat
FROM vbak
UP TO p_max ROWS
INTO CORRESPONDING FIELDS OF TABLE gt_vbak.
IF NOT gt_vbak[] IS INITIAL.
Read Sales Document: Item Data
SELECT vbeln posnr matnr netwr waerk
FROM vbap
INTO CORRESPONDING FIELDS OF TABLE gt_vbap
FOR ALL ENTRIES IN gt_vbak
WHERE vbeln = gt_vbak-vbeln.
ENDIF.
PERFORM f_display.
Form F_DISPLAY
FORM f_display.
Macro definition
DEFINE m_fieldcat.
ls_fieldcat-tabname = &1.
ls_fieldcat-fieldname = &2.
ls_fieldcat-ref_tabname = &3.
ls_fieldcat-cfieldname = &4. " Field with currency unit
append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
ls_sort-tabname = &1.
ls_sort-fieldname = &2.
ls_sort-up = c_x.
append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
ls_layout TYPE slis_layout_alv,
ls_keyinfo TYPE slis_keyinfo_alv,
ls_sort TYPE slis_sortinfo_alv,
lt_sort TYPE slis_t_sortinfo_alv," Sort table
ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv." Field catalog
ls_layout-group_change_edit = c_x.
ls_layout-colwidth_optimize = c_x.
ls_layout-zebra = c_x.
ls_layout-detail_popup = c_x.
ls_layout-get_selinfos = c_x.
IF p_expand = c_x.
ls_layout-expand_fieldname = 'EXPAND'.
ENDIF.
Build field catalog and sort table
m_fieldcat c_gt_vbak 'VBELN' 'VBAK' ''.
m_fieldcat c_gt_vbak 'KUNNR' 'VBAK' ''.
m_fieldcat c_gt_vbak 'NETWR' 'VBAK' 'WAERK'.
m_fieldcat c_gt_vbak 'WAERK' 'VBAK' ''.
m_fieldcat c_gt_vbak 'ERDAT' 'VBAK' ''.
m_fieldcat c_gt_vbap 'POSNR' 'VBAP' ''.
m_fieldcat c_gt_vbap 'MATNR' 'VBAP' ''.
m_fieldcat c_gt_vbap 'NETWR' 'VBAP' 'WAERK'.
m_fieldcat c_gt_vbap 'WAERK' 'VBAP' ''.
m_sort c_gt_vbak 'KUNNR'.
m_sort c_gt_vbap 'NETWR'.
ls_keyinfo-header01 = 'VBELN'.
ls_keyinfo-item01 = 'VBELN'.
ls_keyinfo-item02 = 'POSNR'.
Dipslay Hierarchical list
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
i_callback_user_command = 'USER_COMMAND'
is_layout = ls_layout
it_fieldcat = lt_fieldcat
it_sort = lt_sort
i_tabname_header = c_gt_vbak
i_tabname_item = c_gt_vbap
is_keyinfo = ls_keyinfo
TABLES
t_outtab_header = gt_vbak
t_outtab_item = gt_vbap
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " F_LIST_DISPLAY
Form USER_COMMAND *
FORM user_command USING i_ucomm TYPE sy-ucomm
is_selfield TYPE slis_selfield. "#EC CALLED
DATA ls_vbak TYPE ty_vbak.
CASE i_ucomm.
WHEN '&IC1'. " Pick
CASE is_selfield-tabname.
WHEN c_gt_vbap.
WHEN c_gt_vbak.
READ TABLE gt_vbak INDEX is_selfield-tabindex INTO ls_vbak.
IF sy-subrc EQ 0.
Sales order number
SET PARAMETER ID 'AUN' FIELD ls_vbak-vbeln.
Display Sales Order
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDCASE.
ENDFORM. " USER_COMMAND
Kindly Reward Points If You Found The Reply Helpful,
Cheers,
Chaitanya.

Source code of JSF implementation bundled with JDeveloper

Where can I get the sources of JSF implementation bundled with JDeveloper 10.1.3.1 (1.1_02-b08)?

Fair enough. Yes, as far as I know those implementation classes aren't available. Contacting Sun's consulting services is one option, of course. Make sure you get someone who has actual experience with the classes in question, rather than just anyone who happens to be on the bench right now, 'cos they'll charge you handsomely either way.
I take it you've considered decompiling the classes in question ? Obviously there are legal issues to consider if you go that route, but I've found the Kaffe tool handy before now.
http://www.kaffe.org/
The only other thing I can think of is taking a dig around the IBM site to see if any of their equivalent classes are available in source form. I've always used the Sun versions, however, so I've no idea how likely this is.
Ok, I'm out of ideas. Will be interested to hear if you come up with something even more devious.
D.

ESS implementation posibility with ECC 6.0 and EP 6.0

Hi ,
To implement ESS with ECC 6.0 and EP 6.0
Any body can suggest for this implementation feasibility and possibility.
What are the Business packages has to down load and where can we get those BPs.?
After importing into EP 6.0 , what are the configurations and settings required to get SAP HR screens/ivews (preview when we create after systems in EP),
What are the prerequisites and hardware and software requirements for 8000 users (apprx) ?
Any version upgradations are required for implementing this or
can we use this ECC 6.0 as backend and EP 6.0
and please help required for all those things.
Thanks
Kumar.

For ESS/MSS based on ECC 6.0 (ERP 2005), you can download the XSS business packages from
service.sap.com/download --> Support patches and packages --> Entry By application Group --> SAP Application Components --> SAP ERP -->
SAP ERP 2005 --> Entry By Component --> SAP XSS --> (SAP ESS 600, SAP MSS 600 and SAP PCUI_GP 600).
You can use JSPM to apply these business packages on to the portal. To use JSPM, you have to login to the portal server using <SID>adm to be able to use the JSPM tool.
Business Packages and components in it: you BP consists of the 2 following parts
1) BP_ERP5ESS / BP_ERP5MSS is Portal Business package which consist of iview, pages and roles.. while SAP_ESS / SAP_MSS. is WebDynpro part of it.
These iviews will direct to some WD application which are part of SAP_ESS / SAP_MSS. and they are deployed on server.
2) you have to simple go to
service.sap.com/downloadSupport patches and packagesEntry By application GroupSAP Application ComponentsSAP ERPSAP ERP 2004/2005--Entry By ComponentSAP XSS
pick the correct version and download. You get full package not incremental. Old ones will be overwritten when you deploy them. try to download them again if it failed first time.
3) Refer note 761266 for package compatibility.

Hi Any body guide me for Advance pricing setups and implementation manual with screen shots

Hi Any body guide me for Advance pricing setups and implementation manual with screen shots
Regards
Guru

Hi,
Please <b>read the rules of engagement</b> before posting.
<b>- Do not ask to send you an email.</b>
The question you ask and the solution to it is often also interesting for other users of the community. If you ask somebody to send you the answer per email, you deprive others of also learning to know the answer. Therefore any requests for sending material or answers to an email address will be modified by the forum moderators.

How to Implement SSL with Oracle Applications R12 without using Load Balanc

How to Implement SSL with Oracle Applications R12.1.3 without using Load Balancer

Please refer to (Enabling SSL in Release 12 [ID 376700.1]).
Thanks,
Hussein

Reducing your implementation time with Configuration Express Wizard

Dear B1 community,
recently a new tool has been published on the SDN which may help you to reduce the implementation time of SAP Business One 2005 A SP01.
It is provided as a non-supported version and you can download it here: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0033074f-9958-2a10-9cb0-ad9f75622b40.
The package contains: The Configuration Express Wizard, a presentation explaining how to use the tool, and two webex sessions for more details.
Try it - we are curious on your feedback.
Regards,
Markus

Hi guys
I've tried all links given here, but none of them are working properly. I've tried saving and opening, but either way I got a corrupted file.
Is there any other way I can download it?
I actually have CEW, but I think it is the old version, so I'm getting the following message:
Wrong digital signature for add-on installer
I supposed that the new version would fix this, according to this post:
Reducing your implementation time with Configuration Express Wizard
Can anyone help? I really needed this to do a presentation on thursday!
Thanks!!

Implement Comparable with multiple arguments

Is there a way of implementing Comparable<> with multiple different arguments to the Comparable generics?
For example:
public class Foo<K, V> implements Comparable<K>,
Comparable<V>
}The compiler complains with the error: "The interface Comparable cannot be implemented more than once with different arguments: Comparable<K> and Comparable<V>"
Clearly, this cannot be done exactly like this, so I'm wondering if there is a different way of accomplishing the same functionality.
Edited by: mgolowka on Apr 24, 2008 12:22 PM

I'm working on creating a generic binary search tree. Currently I have this:
public class BinarySearchTree<T extends Comparable<T>> implements Collection<T>
}With the add() function, I can simply do add(T) that will use T's compareTo(T) method to find its place in the tree, however with the remove() and get() functions that I want to have would require an input of T, which isn't what I'm entirely looking for. I could change this to have a key/value pair so it's functionality is like a set, but I'm not sure if that's the best course of action. I could make it implement Map<K, V> to get that functionality...
There is no time limit on this project as it is a part of a personal project.

How to Implement SSO with R12

Hi,
I have installed R12 with Vision Demo Database.now i need to implement SSO for it. can anyone tell the procedure to implement in a detailed manner?

Hi,
Please see these docs.
Integrating Oracle E-Business Suite Release 12 with Oracle Internet Directory and Oracle Single Sign-On [ID 376811.1]
Oracle Application Server with Oracle E-Business Suite Release 12 FAQ [ID 415007.1]
Starting R12 Apache errors with status 204 after Cloning SSO Enabled E-Business Suite Instance [ID 730982.1]
Thanks,
Hussein

How to implement JAAS With Weblogic 10.3

I am working on a migration project. A project is to be migrated from JBOSS to Weblogic 10.3. JAAS has been used in JBOSS for security purpose.
Required classess like LoginModule, CallBackHandler are customized and put into a jar file. Next a Login page has been created with action=”j_security_check”, which is supposed to be called whenever protected resource has been requested. In web.xml Roles and Policies are defined. There is a jboss-web.xml in which roles are mentioned. In web.xml
There is a login-config.xml that has been put into Jboss server classpath. In this file, some sql queries are there.
In weblogic I am not able to understand that how to configure this login-config, how to map roles and policies. Exactly I am not able to find what are the steps needed to implement this JAAS in weblogic10.3. I also tried using the Read-Only SQL Authenticator Provider under security Realms but not sure how to use groups, because I have no Group related tables in my DB.
Kindly anyone share the knowledge.

Hi,
I also want to do the same thing. Did you get any solution for this problem. If yes then please share it with me. I am struggling with this.
Thanks,
Sanjay

How can I implement this with CWGraph control?

Who can help me,i meet a difficult problem:
Now i have a form(historygraph.frm), four DTPicker controls(DTPicker1,DTPicker2,DTPicker3,DTPicker4), and three command control(cmdFind,cmdNextPage,cmdPreviousPage).
My database is SQL SERVER 2000,
In my table(mytable),I have two fields:
(1)savetime(datetime) (2)value(integer)
So DTPicker1 and DTPicker2 stand for the time that I want begin to find in the database table savetime field. DTPicker3 and DTPicker4 stand for the time that I want end to find in the database table savetime field.
DTPicker1.Format = dtpShortDate
DTPicker2.Format = dtpTime
DTPicker3.Format = dtpShortDate
DTPicker4.Format = dtpTime
When the user select the time query range.(from begin time to end time)
and press the command(cmdFind),I need these data value to display with the CWGraph control.Meanwhile,I must display the data savetime on X Axes,and the data value on Y Axes.
Because the amounts of data is very large,So I must display the Graph on limited amount,When the chartlength is full,user can press the Next Page command,also user can press the Previous Page command to look the last page data chart. The whole interval of the pages can set 1 hour or 3 hour and so on.
For Example:
data1 savetime:09:00:03,data1 value:1000
data2 savetime:09:00:08,data2 value:1020
data3 savetime:09:00:20,data3 value:2000
On the X Axes,display in order: 09:00:03 09:00:08 09:00:20 ...
I have complete the code that get the savetime and value when user select the datetime query range,But I can't display it with chart,and implement the function as I describe above.
Who can give me help ,how to use CWGraph control,How to set it,I have see the sample but can not solute this problem.
Please Help me,otherwhise My boss will ......
Thanks.

Okay, first you will want to use the PlotXvsY method of CWGraph. This method plots a 1D or 2D array of Y data against a 1D array of X data.
Place a CWGraph on your form. By default its name will be CWGraph1. You can change the format X axis by right-clicking on the graph and selecting Properties. On the Format tab, you will see that time is one of the Built-in format styles. Select the appropriate format string and press Apply. Anywhere you want the graph to plot your data you can place the command:
CWGraph1.PlotXvsY savetime, value
To view help on this method, you can type in the above command, place the cursor somewhere in the method call and press F1.
Now, in terms of displaying only part of the data, I recommend deciding the maximum number of data points you want displayed at a time. You can then create arrays of the desired subsets of times and values to display, and use these subsets in your call to PlotXvsY. If you create a Sub with arguments for selecting the subsets of data, the Sub could be called from the callbacks of your command buttons.
Regards,
Eric

RFC Implementation problems with SUP iOS

Hi All,
I have two RFCs, the first one is quite simple with two string inputs (defined as load parameters) and the output without any table. The Second one has several output tables and several inputs (String) including an Inputstructure.
The first one is working fine, the second one doesnt work at all. I'm really sure that I implemented everything according to the Documenatation:
Sybase Unwired Platform 2.1 > Sybase Unwired WorkSpace - Mobile Business Object Development 2.1 > Develop > Developing a Mobile Business Object > Creating Mobile Business Objects > Creating Multiple Mobile Business Objects From a Single Operation
Are there any known pitfalls regarding the RFC implementation in SUP that are not documented? I'm trying to implent this RFC now for days and I'm not sure if its my fault or a bug in SUP....
Thanks for any help

If I understand your problem correctly you are not able to see the out parameters while creating an MBO in SUP? if that's the case, for multiple parameters as an out put you might have to implement a result checker, it will not turn up as an output while creating the MBO.
Srinivas Divakarla

"No service implementation available" with adhoc template in 1.3

Hello
I'm trying to use the adhoc template available since 1.3, using "X" global variables for connection name, system, query name and query type ...
And I systematically get the error message :
"No service implementation available"
query could not be loaded
I know that some have faced this issue and that it's known from many specialists here...
- I've checked that everything is OK when I don't use the variables and execute the adhoc template app as a standard one (incl. the DSource, everything works well).
- I've also checked that the olap connection language was not saved (it solved most of the cases described in the community)
But I still have it.
Any idea?
Thanks a lot in advance
Best Regards

Hello Karol
Thanks a lot for your answer.
In fact it all has to do with events order : datasource manually assigned in designer will be initialized before X parameters evaluation, so if this datasource is an inexisting one, I'll get an error message before X parameters evaluation.
Understood!
It's not a problem to manually assign the datasource in designer.
By the way, if you refer to Michael Howles "making-adhoc-analysis-template-images-and-css-work" document, you have to manually set at least the datasource connection, whether or not it is replaced at run time by XSYSTEM parameter, to make the template work on BI platform.
So it works with a manually assigned query, as soon as this query exists : OK it's useless in case of X parameters usage, as this query will be initialized and immediately replaced by the one defined in the XQUERY parameter, but it works. It was not working for me (no effect from X parameters) because the manually assigned query was wrong and execution was some kinda stopped after the error message.
Question)
Finally, this template doesn't work for me (same error message : no service implementation available) if I use the system alias in the XSYSTEM parameter (for example "B73"). It works only if I use the cuid of the OLAP connection defined in the CMC (...&XSYSTEM=cuid:AUoUxgljSKNFkFeselrOJ1Q&XQUERY=DSTUDIO_DASH_4&XTYPE=BW). When I look at the adhoc template start up script :
DS_1.assignDataSource(XSYSTEM, DataSourceType.QUERY, XQUERY);
the assigndatasource method first parameter is supposed to be set with that kind of cuid : even if the contextual help describes a "Q99" parameter as an example - i.e. the connection name - in fact it doesn't accept this "name" format ; furthermore, using the wizard leads to a cuid anyway!
DS_1.assignDataSource("cuid:AUoUxgljSKNFkFeselrOJ1Q", DataSourceType.QUERY, "DSTUDIO_DASH_4");
I guess it's not normal, because both contextual help, documentation and tutorial (where "HBW" is used as XSYSTEM parameter) would then be wrong, and because this template would not be user friendly at all, if cuid were mandatory, as no one knows them by heart.
So where did I go wrong? Do you have any idea why I can't use connection alias ?
Thanks in advance,
Regards
Rémi
DS 1.3 SP0, BI Platform

Implementing versioning with a Java SDK

I have an SDK that I supply to vendors who want to develop custom classes that extend the classes in my SDK .jar (the specifics of the SDK is unimportant). I am trying to devise a way find out what version of the SDK the vendor compiled their class against without requiring the vendor to make code changes.
In my first attempt, I included a final method in the SDK called getVersion() that returned "1.0". The problem with this approach is that when I instantiate the vendor's class (that extended the class in the SDK), and call getVersion() on the vendor's class, I get the value "1.0" from the base class, not the vendor class. Therefore, if the vendor compiles his .class file with the "1.0" version of the SDK, and I later upgrade my SDK to "2.0", whenever I call getVersion() from the vendor's .class file, I always get the version from the base class (i.e. "2.0") and not the version that they used originally ("1.0").
What I am trying to do is figure out a way to mark a vendor's class in a manner that is independent of the SDK. Obviously, I could tell the vendor to implement getVersion() and return the number that the SDK is at, or I could have the vendor implement another class called "SDKVersion" and change this to "SDKVersion2_0"..."SDKVersion3_0" as needed, but these require the vendor to take specific action to identify what version they compiled against. I would rather the vendor be unaware of the versioning if possible.
Is there some way to "mark" the class when it is compiled with a number or name? That's all I need to do to accomplish my versioning goals.
Thanks for any help you have,
Michael

You mean, some option of the javac command that would automatically add a getVersion() method to your code? Or a constant containing the version number? When you put it that way, the answer is obviously NO. If you want to require your vendors to implement getVersion(), then declare your class as abstract and define an abstract getVersion() method.

Can we implement SAP with SD, MM, PP WITHOUT FI?

Hi All,
Can we implement SAP MM, SD & PP without SAP FI? If so, how? Please help me
Thanks
Edited by: sk mukka on Feb 9, 2011 1:54 PM
Edited by: sk mukka on Feb 9, 2011 2:19 PM

Hi Mukka,
Logically, It is not possible to implement for the said modules without SAP FI.
Because, account postings can only possible with FI implementation. And these accounting posting can happen for IM transactions/goods movements while recieving the goods and while delivering the goods and also while doing Invoicing /Billing. And moreover all the materials/finished goods are have some value when there is a value for that, defnetly FI process involves.
So, you must implement FI/CO along with the said modules, inorder to update the account postings.
Hope you understand.
Regards,
Sapsrin

Implementing ALG with UC520

Similar Messages

Maybe you are looking for