Implementing Badi ME_PROCESS_PO_CUST

Hi all,
I'm trying to implement the BADI ME_PROCESS_PO_CUST, the method PROCESS_ITEM, and I'm trying to change the field ls_positem-lebre, but it doesn't works. I've seen that this field is in the mepoitem_tech structure in the method set_data and it restores this value to his old value, anyone knows how to change this field?
..and another question...
In the same BADI, I'm trying to change the sale's area in the shipping data, but when I call the method set_shipping_data there is a firewall that only allows me to change the fields vstel, lprio, vsbed, route and ablad. Is there any way to change the other fields?
Thanks,
Xavi

Hi,
By implementing the above badi you can change limited fields at item level.
I am using this to change the following and it is working fine for me.
a) Chaning field -- PLIFZ and RESWK and NETPR based on some header conditions
DATA : LS_MEPOITEM TYPE MEPOITEM.
DATA : ZZPLIFZ TYPE EKPO-PLIFZ.
Get the Item data
    LS_MEPOITEM = IM_ITEM->GET_DATA( ).
     LS_MEPOITEM-PLIFZ = ZZPLIFZ.
     LS_MEPOITEM-NETPR = V_NETPR.
Set the Item data
    CALL METHOD IM_ITEM->SET_DATA
      EXPORTING
        IM_DATA = LS_MEPOITEM.
Try this.
I hope this will help.
Message was edited by: Lanka Murthy

Similar Messages

Custom tab data not saving in ME22N w/ BAdI ME_PROCESS_PO_CUST

Hello all,
I have implemented BAdis ME_PROCESS_PO_CUST & ME_GUI_PO_CUST and created a custom tab at the header level in ME21N/ME22N. I have fields such as Delivery Date and Ex Factory Date in my tab.
We are able to put data in these fields and have that data populate their respective fields in the Purchase Order.
Our users would like to be able to run ME22N and select certain line items and have only those items changed with the data from the custom fields.
So, my question is how do I handle line selection in the context of these BAdIs? Is there a way to know which lines have been selected and then only change the data in those items?
I have looked in Class CL_PO_ITEM_HANDLE_MM for an attribute or method that might help but I haven't found anything as of yet.
I have found that the field MEPO1211-TCSELFLAG is set when a line is selected in ME22N. However, I haven't found a way to work with it. It doesn't get passed to any of the methods in the BAdIs, as far as I know.
January 27, 2012 **************
We were able to capture the lines selected by using code from method mass_change in Include LMEGUICJK, Function Group MEGUI. The lines are in the lt_models table.
So, now my issue is getting data to save in ME22N. When I put data in my custom tabs and select a line, the data gets changed on the screen but does not save. It does work when I make a change in another field, like changing the description for instance. I'm using the set_changed method in Process_Header from ME_PROCESS_PO_CUST but it doesn't work.
I'm getting the idea that I'm the first ABAP developer to try this...
Thanks for any help.
Kind Regards,
Chris
Edited by: Chris Mowl on Jan 11, 2012 10:33 AM
Edited by: Chris Mowl on Jan 11, 2012 4:24 PM
Edited by: Chris Mowl on Jan 27, 2012 10:57 AM
Edited by: Chris Mowl on Jan 27, 2012 2:00 PM

Hi,
Checkout the below link :
<link to blacklisted site removed by moderator>
Shailaja Ainala.
Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

BADI ME_PROCESS_PO_CUST is not triggering while creating/changing PO

Hi,
I am new to BADIs,
I am trying to implement BADI ME_PROCESS_PO_CUST in ECC 6.0. I have done the implementation and activated. I kept a break point in PROCESS_ITEM method, but the BADI is not triggering while creating or changing the PO. Please advice me what could be the reason behind this?
I used the SQL trace but i couldn't get the BADI ME_PROCESS_PO_CUST in the list.
thanks in advance
Regards
Jagadish

hello jagdish,
implement this user exit.....
MM06E005...
go to EXIT_SAPMM06E_017 in that then you can put a break point in the user defined function module.....
or use
BREAK 'C5133392' (use your user in place of C5133392)....it will stop here while creating PO or changing PO...
now you can do whatever you want to do in create or change PO using this function exit......
perform the validations on import parameters.....to create or change ....and activate the project....
hope this will give you some idea and help

BADI: ME_PROCESS_PO_CUST~PROCESS_HEADER? it is urgent

Hi,
I implemented BADI ME_PROCESS_PO_CUST and write some lines in the method of process_header.
but i discover the field reswk is still no value. why.
Thanks.
Best regards.
DATA: re_data TYPE mepoheader.
get the header data
CALL METHOD im_header->get_data
    RECEIVING
      re_data = re_data.
re_data-reswk = 'L000'.
CALL METHOD im_header->set_data
            EXPORTING
              im_data = re_data.

Hi
First check whether this field is there or not in the table data of EKKO
If it is there then it should come into the code of your BADi header data re_data.
Also check after calling method whether other fields data is coming into re_data or not ? if other fields data is coming and only this particular field data is not coming then the problem with code(after it is there in EKKO)
if in EKKO itself it is not there it is not your mistake/code mistake.
Reward points for useful Answers
Regards
Anji

Issues while creating implementation for BADI "ME_PROCESS_PO_CUST"

Hi Group,
I have issues while creating implementation for BADI "ME_PROCESS_PO_CUST".
I tried to create implementation for the above mentioned BADI but, I was getting an error like this:
"Interface implementation IF_EX_ME_PROCESS_PO_CUST does not exist".
I want to implement this BADI and so, ideas/views at the earliest will be appreciated.
Please let me know how to overcome this error.
Thanks,
Vishnu.

Hi,
Have you activated the class which is implementing the interface? (in transaction SE19 you should see class name)
Best regards,
Wojciech

BADI ME_PROCESS_PO_CUST Implementation is not called

Hello,
I have created a test implementation(local object) for BADI ME_PROCESS_PO_CUST and implemented the Process_Item method to compare item price with material master commercial price. I have also activated the implementation.
When I create a PO using ME21N, this implemenation is not getting called. I have put a breakpoint in the implementation but processing doesn't stops here. Also I am not able to find 'Where used' of the BADI name or the interface 'IF_EX_ME_PROCESS_PO_CUST'.
What are the reason for above behaviour? Do we maintain this BADI name in some Customizing Table?
Please help.
Regards,
Shubham

i did the same as you did and the code is clearly getting triggerred.
Samle Code:
DATA : l_header TYPE REF TO if_purchase_order_mm.
DATA : l_conditions TYPE mmpur_tkomv.
DATA : l_item LIKE LINE OF l_conditions.
DATA : l_data TYPE mepoheader.
CALL METHOD im_item->get_header
    RECEIVING
      re_header = l_header.
CALL METHOD l_header->get_data
    RECEIVING
      re_data = l_data.
CALL METHOD im_item->get_conditions
    IMPORTING
      ex_conditions = l_conditions.
CALL METHOD im_item->set_conditions
    EXPORTING
      im_conditions = l_conditions.
if i put break-point on any of these methods the implementation is getting trigerred.

How to fetch newly updated item data in BADI ME_PROCESS_PO_CUST?

Hi Everyone,
While changing a PO, I have a requirement where I need to only modify fields of newly added items of a purchase order and keep the values of existing items as it is. I have implemented the BADI ME_PROCESS_PO_CUST for this. but not able to know how to achieve this requirement. please suggest a solution.
Thanks and Regards,
Indudhar P.G

Hi,
interfaces for PO header and item have method is_persistent. This method returns true if the item/header is persistent which is equal to that it has been written to DB. So new items are not be persistent and old items are persistent.
Cheers

BADI - ME_PROCESS_PO_CUST - To update Condition Types at time of creation

Hi All
I'm relatively new to Implementing BADIs. I'm using the BADI ME_PROCESS_PO_CUST.
I have to update certain condition types with values determined from a custom table maintained for related Vendors.
I have created a 'Z' implementation for ME_PROCESS_PO_CUST and activated the implementation. But when I try to create a PO, the code doesn't seem to be execute!
Following is the code bundle -
METHOD if_ex_me_process_po_cust~process_header .
DATA : l_items TYPE purchase_order_items.
DATA : l_single TYPE purchase_order_item.
DATA : l_item_cond TYPE mmpur_tkomv.
CALL METHOD im_header->get_items
 RECEIVING
 re_items = l_items.
LOOP AT l_items INTO l_single.
 CALL METHOD l_single-item->get_conditions
 IMPORTING
 ex_conditions = l_item_cond.
ENDLOOP.
ENDMETHOD. "IF_EX_ME_PROCESS_PO_CUST~PROCESS_HEADER
Could you please give me your inputs on this?
Regards
Kripal
[email protected]

Kripal,
 The method PROCESS_HEADER gets trigerred only when you make an entry in any of the header fields and then press ENTER or do some action.
For a simple case of analysis put a break-point at
CALL METHOD im_header->get_items
RECEIVING
re_items = l_items.
in your code.
Now if you execute ME21N you will see that the code will not get triggered.But make an entry for one of the fields say fpr purchasing organisation.Now if you press ENTER or click on any other tab your code will get triggered.
Hope this helps.
Reward helpful answers
Cheers
Nishanth

Urgent Help Needed in BAdI ME_PROCESS_PO_CUST

Hello friends,
I m workin on BAdI ME_PROCESS_PO_CUST , my requirement is to store header level text in po if it is left blank by user , for this i have creadted standard text for every po header text , and implemeted method POST of the badi. so when user is saving the po , i m checking whether all header text is filled by user or not , for this i have called method GET_TEXT , if the text is blank i m reading data from standard text using READ_TEXT function module and setting in perticular text by using method SET_TEXT , every thing is working fine , the respective text ifrom standard text getting filled to the perticular text of the po , if left blank by the user . But the actual problem is that when i m going to display the same po again , the text that i was supplied by standard text is not showing in po.
is there is anything that i missed out , i also done coomit work , but its not working ,
so please suggest.......
dont worry abt points

Dear Mr Mahesh
I also face similar problem . But my limitation is that I am new to BADI . Sir it will be great help if you can please mail me the steps / procedure and code to be written for implementing the above BADI .
Sir , I look forward for your kind help please .
Regards
B V Mittal
[email protected]

Rollback BAPI in BADI ME_PROCESS_PO_CUST

hi guys,
I used BADI ME_PROCESS_PO_CUST to implement a code before saving the purchase order (Method POST).
This code contains a BAPI to create a delivery BAPI_OUTB_DELIVERY_CREATENOREF. If this BAPI fails (this is when Return parameter contains 'E' message), I execute function BAPI_TRANSACTION_ROLLBACK.
Guess what is happening?
There is no purchase order created even when screen shows message "Standard PO created under the number 45#######".
What do I want to do?
- Rollback the bapi executed and let the system continue saving the purchase order.
- If possible show a message to the user that there is an error, but command MESSAGE doesn't seem to work in this BADI
Could you share your insights with this wannabe-abapper?
PD: it says in documentation that it is required ABAP OO to implement this BADI and I think I used it correctly for gathering all data I needed. But I just don't understand why MESSAGE statement and FM POPUP_TO_CONFIRM don't work.

Hello
You may try an approach like this:
IF ( 1 = 1 ).
 MESSAGE 'Creation of outbound delivery failed' type 'I'.
 data: ld_dummy type string,
 ls_msg type SMESG,
 lt_msg type tsmesg.
 message id '00' type 'E' number '398' with 'Creation of outbound delivery failed'
 space space space into gl_dummy.
 move-CORRESPONDING syst to ls_msg.
 APPEND ls_msg to lt_msg.
 CALL FUNCTION 'FB_MESSAGES_DISPLAY_POPUP'
 EXPORTING
 IT_SMESG = lt_msg
* ID_SMESG_ZEILE =
* IT_RETURN =
* ID_SEND_IF_ONE =
 EXCEPTIONS
 NO_MESSAGES = 1
 POPUP_CANCELLED = 2
 OTHERS = 3.
 IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
endif.
Regards
Uwe

Problem on Implementing badi ME_GUI_PO_CUST

Hi Expert,
I have implement BADI ME_GUI_PO_CUST, to add the new tab.
I have managed to View the tab in Both ME21N, and ME22N with implement SUBSCRIBE and MAP_DYNPRO_FIELDS.
method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE
DATA: ls_subscriber LIKE LINE OF re_subscribers.
CHECK im_application = 'PO'.
CHECK im_element = 'ITEM'.
CLEAR re_subscribers[].
ls_subscriber-name = subscreen1.
ls_subscriber-dynpro = '0002'.
ls_subscriber-program = 'ZRPP_ME_GUI_PO_CUST_SCREEN'.
ls_subscriber-struct_name = 'CI_EKPODB'.
ls_subscriber-label = text-001.
ls_subscriber-position = 7.
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
METHOD : IF_EX_ME_GUI_PO_CUST~MAP_DYNPRO_FIELDS
FIELD-SYMBOLS: <mapping> LIKE LINE OF ch_mapping.
LOOP AT ch_mapping ASSIGNING <mapping>.
 CASE <mapping>-fieldname.
 WHEN 'ZCNUM'. <mapping>-metafield = mmmfd_cust_01.
 ENDCASE.
ENDLOOP.
Method IF_EX_ME_GUI_PO_CUST~MAP_DYNPRO_FIELDS
DATA: lw_fieldselection LIKE LINE OF ch_fieldselection.
LOOP AT ch_fieldselection INTO lw_fieldselection.
 lw_fieldselection-fieldstatus = '+'.
 MODIFY ch_fieldselection FROM lw_fieldselection.
ENDLOOP.
I need to store the value, and some of thread said it required methods:
TRANSPORT_FROM_MODEL
TRANSPORT_TO_DYNP
TRANSPORT_FROM_DYNP
TRANSPORT_TO_MODEL
I have click on the subcreen, or enter at the field, but it will not able to trigger the Above Methods.
How do I do for the to trigger above Methods? Or Should I added some additional code at screen program? I want SAVE the data actually into EKPO.
Thanks in advance.

Hi Sim,
Recently we have the same reqirement.
You can have a look at the below code..
First method: SUBSCRIBE
DATA: ls_subscriber LIKE LINE OF re_subscribers.* we want to add a customer subscreen on the Header tab
 CHECK im_application = 'PO'.
 CHECK im_element = 'HEADER'.* each line in re_subscribers generates a subscreen. We add one subscreen in this example
 CLEAR re_subscribers[].
* the name is a unique identifier for the subscreen and defined in this class definition
 ls_subscriber-name = subscreen1.
* the dynpro number to use
 ls_subscriber-dynpro = '0001'.
* the program where the dynpro can be found
 ls_subscriber-program = 'SAPLZKMMM_KAU86037'.
* each subscreen needs his own DDIC-Structure
 ls_subscriber-struct_name = 'CI_EKKODB'.
* a label can be defined
 ls_subscriber-label = text-001.
* the position within the tabstrib can be defined
 ls_subscriber-position = 13.
* the height of the screen can be defined here. Currently we suport two screen sizes:
* value <= 7 a sevel line subscreen
* value > 7 a 16 line subscreen
 ls_subscriber-height = 7. APPEND ls_subscriber TO re_subscribers.Here, parameter u2018im_elementu2019 is defined as u2018HEADERu2019 as we are adding new tab in header section of PO.
Define a function group and take the main program and define it in ls_subscriber-program.
Also define a sub screen with the required fields and assign it to the parameter ls_subscriber-dynpro.
Then method MAP_DYNPRO_FIELDS
FIELD-SYMBOLS: <mapping> LIKE LINE OF ch_mapping.
 LOOP AT ch_mapping ASSIGNING <mapping>. CASE <mapping>-fieldname. WHEN 'ZZPAYMENT_AGRE'. <mapping>-metafield = mmmfd_cust_03.
 WHEN 'ZZPROJECT'. <mapping>-metafield = mmmfd_cust_04.
 ENDCASE. ENDLOOP. TRANSPORT_FROM_MODEL:
DATA: l_header TYPE REF TO if_purchase_order_mm,
 ls_mepoheader TYPE mepoheader,
 ls_customer TYPE CI_EKKODB.*--------------------------------------------------------------------*
* system asks to transport data from the business logic into the view
*--------------------------------------------------------------------* CASE im_name. WHEN subscreen1.* is it an Header? im_model can be header or item.
 mmpur_dynamic_cast l_header im_model.
 CHECK NOT l_header IS INITIAL.* transport standard fields
 ls_mepoheader = l_header->get_data( ).* store info for later use
 MOVE-CORRESPONDING ls_mepoheader TO dynp_data_pbo.
 WHEN OTHERS.
 ENDCASE. TRANSPORT_TO_DYNP:
Define a FM 'ZK_KAU86037_PUSH' to push the values.CASE im_name. WHEN subscreen1. CALL FUNCTION 'ZK_KAU86037_PUSH'
 EXPORTING
 im_dynp_data = dynp_data_pbo. WHEN OTHERS.
 ENDCASE. TRANSPORT_FROM_DYNP:
Define another FM 'ZK_KAU86037_POP'.CASE im_name. WHEN subscreen1. CALL FUNCTION 'ZK_KAU86037_POP'
 IMPORTING
 ex_dynp_data = dynp_data_pai. IF dynp_data_pai NE dynp_data_pbo.
* something has changed therefore we have to notify the framework
* to transport data to the model
 re_changed = mmpur_yes.
 ENDIF. WHEN OTHERS.
 ENDCASE. TRANSPORT_TO_MODEL:
 DATA: l_header TYPE REF TO if_purchase_order_mm,
 ls_mepoheader TYPE mepoheader,
 ls_customer TYPE CI_EKKODB,
 l_po_header_handle TYPE REF TO cl_po_header_handle_mm.*--------------------------------------------------------------------*
* data have to be transported to business logic
*--------------------------------------------------------------------* CASE im_name. WHEN subscreen1.* is it an item? im_model can be header or item.
 mmpur_dynamic_cast l_header im_model.
 CHECK NOT l_header IS INITIAL. ls_mepoheader = l_header->get_data( ).* standard fields changed?
 IF dynp_data_pbo-zzpayment_agre NE dynp_data_pai-zzpayment_agre
 OR dynp_data_pbo-zzproject NE dynp_data_pai-zzproject.* update standard fields
 ls_mepoheader-zzpayment_agre = dynp_data_pai-zzpayment_agre.
 ls_mepoheader-zzproject = dynp_data_pai-zzproject.
 CALL METHOD l_header->set_data
 EXPORTING
 im_data = ls_mepoheader.
 ENDIF.
 WHEN OTHERS. ENDCASE.
Then we have to implement one more BADI to display the tab and update the values.
Implement the BADI ME_PROCESS_PO_CUST. This cannot be used multiple times.
In this, we have methods (PROCESS_HEADER,PROCESS_ITEM).if we need to any validations for the fields we can write the logic here in this methods. In my case I need to check for the document type which I implemented in the method (PROCESS_HEADER).
Hope it helps you.
Thanks
Arbind

BADI ME_PROCESS_PO_CUST - DOES NOT CLEAR OUT ERROR

In ME21N I want to validate the field Commodity Code - STAWN. I have used the BADI ME_PROCESS_PO_CUST*
. Have used get_foreign_trade() in the PROCESS_ITEM method . I am able to throw an error . It is doing it but*
after throwing error then when we give a valid Commoditycode too it is still showing the error and not clearing the error .*
As suggested by Dean Q I used INCLUDE mm_messages_mac,
tried im_item->set_foreign_trade( ls_mepo_eipo) still when a valid Commodity code is entered after an invalid one it does not clear out the error. In fact on checking using break-point I found that the second time it does not enter into the method PROCESS_ITEM. Any help is welcome
Nivedita

Hi,
In SE18 give ME_PROCESS_PO_CUST as the enhancement spot and display. At the left side of the screen you can see the badi definition ME_PROCESS_PO_CUST. Expand the tree and double click on implementations. You can see the enhance implementations created. Double click on the enhancement implementation and in that screen there is a check box 'Implementation is active' and field 'Effect in current client'.
If you know the enhancement implementation name(not the badi implementation name), you can check it directly from se19.
Regards,
Poornima

BADI ME_PROCESS_PO_CUST Method Post

Hi, how can we know in the method post of the BADI ME_PROCESS_PO_CUST if we are in creation mode (me21n) or change mode (me22n), I need to do some coding only at the creation of the PO but this method is call anytime we click save!
thanks!

Hello Alexandre
It would be possible to check the transaction. However, if the BAPI BAPI_PO_CREATE is used the BAdI is also processed yet the transaction is most likely wrong.
An unambigous approach is to check IMPORTING parameter IM_TRTYP in method IF_EX_ME_PROCESS_PO_CUST~OPEN:
METHOD if_ex_me_process_po_cust~open.
* define local data
DATA:
 lo_po TYPE REF TO cl_po_header_handle_mm,
 ls_header TYPE mepoheader.
me->md_trtyp = im_trtyp. " save transaction type
IF ( im_trtyp = 'H' ). " add new purchase order
I would add an instance attribute MD_TRTYP to the BAdI implementing class and save the transaction type in method IF_EX_ME_PROCESS_PO_CUST~OPEN (see above).
Now you can simply add the following IF condition to your POST method:
METHOD if_ex_me_process_po_cust~open.
CASE me->md_trtyp.
 WHEN 'H'. " add new purchase order
... " do required action for CREATE
 WHEN ... .
 WHEN others.
ENDCASE.
The possible transaction types can be found at: im_trtyp -> data element -> domain (fixed values).
Regards
Uwe

METHOD PROCESS_ACCOUNT OF BADI ME_PROCESS_PO_CUST.

HI,
I need to implement the method PROCESS_ACCOUNT of badi ME_PROCESS_PO_CUST.
can anyone suugest me the samolw code for the same.
i know i can get the account assignment data in the mathod IM_ACCOUNT->get_data.
But how to declare the variable to store the data of im_account->getdata.
so that i can use it in the progra?
i mean for ex for header we will declare
ls_header type mepoheader
and then
ls_header = im_header->get-data.
similarly can you plese tell me the declaration for storing the account assinment data.
which table that variable will refer to.
Smriti

hai smriti
u can call the method
data: it_data type MEPOACCOUNTING
im_accoutn->get_data importing re_data = it_data.
just click the method type of parameter IM_ACCOUNT which is IF_PURCHASE_ORDER_ACCOUNT_MM an interface
u will get all the methods fro the same u have ur mehtod get_data just click on it and click parameters and u get the paramter type which is MEPOACCOUNTING
regards
m.a
Edited by: mohammad afzal on Jul 9, 2009 7:11 AM

PROCESS_HEADER not fired in BADI ME_PROCESS_PO_CUST

Dear experts,
I face the problem, that the method PROCESS_HEADER of BADI ME_PROCESS_PO_CUST is not fired, when I am changing po header text. My requirement is to set a customer po header field, whenever a po header text is existent.
Does anybody know, if this is the standard behaviour and how I can work around it?
Thanxs

Hi Aparna,
actually I tried this, too.
In the methods Check and Post (which both are fired normally) I coded my requirements, but in this methods I faced the problem that I was not able to save my programatic header field changes. (Even with the trick to cast the IM_HEADER to CL_PO_HEADER_HANDLE_MM to allow changes of internal attributes, used in method set_data(), any changes of po header fields were not saved.) But maybe I am wrong with my implementation? You may have a look:
DATA: lv_val_id TYPE thead-tdid.
DATA: lv_val_name TYPE thead-tdname.
DATA: lv_val_object TYPE thead-tdobject.
DATA: p_mepo_header TYPE MEPOHEADER.
DATA: it_tline TYPE TABLE OF TLINE.
DATA: lv_cl_po_header_handle_mm TYPE REF TO CL_PO_HEADER_HANDLE_MM.
check existents of po header text
lv_val_id = 'F09'.
p_mepo_header = im_header->get_Data( ).
lv_val_name = p_mepo_header-ebeln.
lv_val_object = 'EKKO'.
CALL FUNCTION 'READ_TEXT'
EXPORTING
      client = sy-mandt
      id = lv_val_id
      language = sy-langu
      name = lv_val_name
      object = lv_val_object
    TABLES
      lines = it_tline
    EXCEPTIONS
      ID = 1
      LANGUAGE = 2
      NAME = 3
      NOT_FOUND = 4
      OBJECT = 5
      REFERENCE_CHECK = 6
      WRONG_ACCESS_TO_ARCHIVE = 7.
any text there, then update customer po header field
IF sy-subrc = 0.
    p_mepo_header-zzfield = 'X'.
else.
    p_mepo_header-zzfield = ' '.
endif.
QD
lv_cl_po_header_handle_mm ?= im_header.
lv_cl_po_header_handle_mm->my_cust_firewall_on = 'X'.
im_header->set_Data( p_mepo_header ).
im_header->set_changed( ).
po is still same as before and field zzfield was not updated.

Implementing Badi ME_PROCESS_PO_CUST

Similar Messages

Maybe you are looking for