Implementing MSS and PCR

Hello Every one,
Can any one please point me to good documentation on how to enable PCR for MSS.
If any one has step by step implementation of MSS . Can you please forward me.
Thanks,
Boiler

Refer [this|http://www.google.co.in/search?hl=en&q=HCMProcessesandFormsfiletype%3Apdf&meta=&aq=f&oq=] for documentation.
Regards
Shital

Similar Messages

MSS and BW Reporting

Hello - does any one have any experience with MSS and BW reporting?
We have a requirement to implement BW reports to Line Managers through MSS.
For R/3 Reports we have no issue as we can use the standard structural authorisation function module to restrict access to empoyees directly reporting to the manager.
How can we restrict BW reports in the same way? i.e. When Manager runs the report they should only see data about the employees that report to them in the Org structure.
We are using BW 7.0.

Hi Mike,
Did You implement this scenario. Even we are trying to do the same.
I am kind of no clue about which authorizations a manager needs in BW system.
We are using EP6.0 SP16 and backend system is ECC5.0.
I have couple of questions.
1. What authorizations in BW system the portal user (Me with content admin, system admin, user admin roles) needs to view the BW reports or BW iviews?
2. Manager (MSS) can not view crystal reports in the work set 'Reporting' assigned to a manager in ECC5.0. Other iviews within the BP60.1 are working fine.
3. When manager tried to see a crystal report , it threw an error saying that
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Unable to lookup System 'SAP_BW_HumanResources'. Please check the system object and the alias..
See the details for the exception ID in the log file
com.sap.portal.appintegrator.sap.CrystalReport::CrystalReport/SSOLayer
Could you please help in finding proper documentation on setting up manager to see the reports in BW system.
Thanks!

Error implementing MSS

Hi,
I'm trying to implement MSS on EP SP9.
I just downloaded MSS ZIP file called BPMSS601_18-20001489.ZIP from Portal Content Portofolio. When I try to deploy this ZIP file with SDM, this error appears:
com.sap.sdm.util.sduread.IllFormattedSduFileException: The information about the development component
found in the SD file is either missing or incomplete!
Manifest attributes are missing or have badly formatted value:
attribute keylocation is missing
attribute keyname is missing
attribute keyvendor is missing
attribute keycounter is missing
I'm doing somethig wrong?? Anyone knows the right way to install or deploy on EP MSS ZIP file I downloaded. Please I need to do it quickly!
Thanks in advance,
Arnau

Hello,
I use the Sneak Preview Web AS Java + Portal SP16 and chose the package MSS12_0-10002964.sca.zip (plus the according PCUIGP package). Deployment went fine, so you might consider using this package.
Regards,
Sebastian

MSS and E-recruitment

Hi All,
We are implementing MSS Business Package. The client has already implemented E-Recruitment and it resides in diferent box.
Under 'My Team' there is a submenu called 'Recruiting'.
We are facing problem while creating new Requisition Request. The adobe interactive form opens. At the last of the form there is a dropdown for Recruiter, we are not getting the list of Recruiters in that drop down and hence not able to proceed further.
Can anyone tell us where we need to maintain Recruiters and how?
Also are there any Workflows involved once the form get submitted?
Please help
Thanks & Regards,
Nilesh.

Were you able to solve this problem ???
If yes, Kindly let me know the solution....
Thanks & Regards,
Raghav

Hoe to create HR Schema and PCR's

Hi experts,
I am new to HR-ABAP. and I want to know about HR schema and PCR's and how it can be implemented???Plz. help me

Hi,
Generally schemas and PCR's are written by Functinal guys. They are mainly used in payroll processing. Schemas and PCR's are written using T-codes PE01,PE02 and PE03 there you have details explanantion for each step.
Regards,
Ramu N.

Implementing MSS in EP 6.0 with ECC 6.0 as back end.

hi,
I am implementing MSS in EP with ECC 6.0. what are the configuration should I have to do in ECC 6.0 to implement MSS. Please provide me details as to what are the steps for configurations.
Thanks & Regards,
Ramesh

Hi Ramesh
Implementation steps for MSS:
1 - Deploy PCUI .sca to your J2EE Engine via SDM
2 - Deploy MSS .sca to your J2EE Engine via SDM
3 - Make sure you have a SLD available, or you can enable the local SLD on your Portal J2EE instance
via http://localhost:port/sld and login as Administrator or J2EE_ADMIN and run the auto import.
4 - Define your ECC server in the SLD as a new WAS ABAP instance and define all the settings via the Wizard.
5 - Use the WebDynpro explorer to configure the Jco destinations to use the new WAS ABAP instance in your SLD
6 - Define the system definitions as per the MSS documentation for alias SAP_WebDynpro_XSS and
others
7 - Assign Employee role from PCD to your Portal user and assign the relevant profile to your backend user in ECC.
8 - Use transaction pa30 to add a communications infotype entry to map your username to an employee in the hierarchy.
MSS 60.1 config instructions:
https://www2.iviewstudio.com/support_content/_17011/BP_MSS_ERP04_601_EN.pdf
Hope this helps.
Regards
Yoga
PS:Reward points for useful answers

NetWeaver Portal and ERP 6.0: BI, ESS/MSS and full Portal on one machine

Hello,
with ERP 6.0 you need a EP Core Portal for BI Java. An other EP Core Portal for HCM ECC/MSS. The iViews from this portal you integrate in the main portal via federated portal. But in this scenario i need to much portals and have a lot of maintenance costs (administration overhead for evry portal). For a small Customer i will build one Portal for all. It is possible e.g. to use the BI Portal with ESS/MSS and as full portal?
Best regards,
Patrick

Hi,
So you would like one BI installation with both the ABAP and the Java-stack with the full BI-functionallity and additionally the XSS-component and set it up to work against the ECC ABAP-only system ?
I think the scenario would actually work, but:
1) You might get future problems if you want to upgrade your BI-system and not the ECC-system.
Is it possible to run the old XSS-components in the new java-stack ?
2) You might get future problems if you want to upgrade your ECC-system and not the BI-system.
What if the new version of the XSS-component demands certain java-components which the BI-system do not have.
So my recommendation is still to run the java-stack on both systems.
ECC with the XSS-java-components and BI with the Bi-java-components.
This way you do not lock yourself into a corner and each system can be upgrade independent of the other.

Need manual to implement training and event management

Hi All
I'm going to implement Training and event management for my client.Plz help me if u've any kind of manual or any guidelines for me.
Thanks,
SKM

Hi Santosh,
Best way to check the guidelines is to see help.sap.com.
From my experience you need to follow the following steps:
1. Create busness event groups
2. Create business event types
3. Create resource types
4. Create resources
5. Create external instructors (if any)
6. Create companies (if any)
7. Create locations
8. Manage integration switches (SEMIN rows in T77S0 table)
For the master data creaton activities above, you can create LSMW to make it possible for mass data upload.
After your business catalog and all other master data is in place,
1. Plan business events - PSVP
2. Create business events wth/without resources - PSV2
3. Book attendees- PSV1
As recurring activities:
1. Firmly book the events.
2. Cancel events (if needed)
3. Follow-up events.
Regards,
Dilek

Implementing MSS

Hello,
We are implementing MSS on EP7.0 but when I goto Manager Self Service ...I dont see employees under the manager....we are not using chief positions in the org. structure ...how can I configure this..?
Also how do i configure various reports in ECC toshow up on the portal...?
Any help would be highly appreciated.

Hi Anil.
MSS - Not using Chief Position
This might give u some idea.
Regards,
Manoj.

Reports available in the Business Package for MSS and ESS

Hi,
I have searched sdn.sap.com throughout looking for a comprehensive list of reports available in the business packages for both MSS and ESS, i got a little bit of joy and found some of the MSS reports but not all on sdn.sap.com, can anyone please advise where i would find such information on both these packages, just to re-iterate, i am looking for a list of reports these business packages offer? any help much appreciated.
Thanks
John
P.s any documents can be sent to [email protected]

@John
(1) ESS- We built our own custom PORTAL role/workset in which one of the worksets we created is called "Tools and Forms". Under that workset, we placed various pages/iViews that either are simple URL iViews that link to external documents and such (like vacation request forms since they do not do online leave requests yet) as well as a couple ot t-code iViews that run reports in ECC for the employee. Nothing very mind blowing there. Just some content creation on the portal side.....oh, and some config on the backend to create a Homepage Framework Area Page and all for it (I liked that part!)
(2) Wow....talk about perfect timing...I just had to document the way MSS sees the MDT reports in it's "reporting" area yesterday! haha Here goes the quick explaination....in configuration for MDT, you have various "scenarios". These kinda determine which "groups" of reports will show in MDT. For MSS for the Reporting webdynpro/service, the scenario is RPT0 (in ECC 5.0, at least). Soooo if you look at the function CODES assigned to RPT0, you will see several for Training and one for Accounting (Cost Centers)...you can reference the function CODES listed back to the "pool"/library of function codes a bit up/previous in the same config area for MDT(I think it is called "Define Function Codes"). However, there is one more piece you will see listed under RPT0....it is a DIRECT call to function MODULE "HR_HIS_READ" (this was a bugger to find because I could not find the "Maternity" report listed in the function codes and had to figure out where the heck it was coming from! haha). Anyways....what the function MODULE actually does is call the HR Information System (HIS) passing it the RPT0/MSS scenario. This returns the particular reports for Employee Data and Time&Attendance. You can see this if you run the HR_HIS_READ function directly and enter RPT0 for the second input value (first and third are not needed or you can just enter "*". Sooooo that is how the "magic" happens. Hope that explained it. From there, you can simply config you own scenario/reports to add into MSS if you like.
Hope this helped!

Can please tell me how to implement expand and collapse table row data?

i am trying implement expand and collapse table row data but i do not get any ideas..can please any one help me its an urgent requirement

Yes, we can.
I think the best place for you to start for this is the NI Developer Zone. I recommend beginning with these tutorials I found by searching on "data log rio". There were more than just these few that might be relevant to your project but I'll leave that for you to decide.
NI Compact RIO Setup and Services -> http://zone.ni.com/devzone/cda/tut/p/id/11394
Getting Started with CompactRIO - Logging Data to Disk -> http://zone.ni.com/devzone/cda/tut/p/id/11198
Getting Started with CompactRIO - Performing Basic Control -> http://zone.ni.com/devzone/cda/tut/p/id/11197
These will probably give you links to more topics/tutorials/examples that can help you design and implement your target system.
Jason
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!

Can anybody send me some docs on ESS/MSS and Adobe Forms.

Hi all,
Can anybody please send me some doc/materials/link on how to coonfigure/develop/work with ESS/MSS and Adobe forms.
Its very urgent requirement.
Thanks n Regards
A.M.Rao

For ERP 2005 check out
hi ,
for ess..
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAESS/ESSIAC.pdf
Personnel Admin.http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/0fab358b096510e10000009b38f839/frameset.htm
Training & Event management
http://help.sap.com/saphelp_erp2005vp/helpdata/en/44/2bc9367a23fb68e10000009b38f889/frameset.htm
Personnel Development
http://help.sap.com/saphelp_erp2005vp/helpdata/en/cf/5e9b38f8236e6de10000009b38f842/frameset.htm
ESS - http://help.sap.com/saphelp_erp2005vp/helpdata/en/5b/76a6d7fd3a4e91bfb422405bf3e04d/frameset.htm
MSS - http://help.sap.com/saphelp_erp2005vp/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm
For ERP 2004
ESS - http://help.sap.com/saphelp_erp2004/helpdata/en/5b/76a6d7fd3a4e91bfb422405bf3e04d/frameset.htm
MSS - http://help.sap.com/saphelp_erp2004/helpdata/en/0a/8b3b40b1607a56e10000000a1550b0/frameset.htm
Also if you have S User ID on SAP Service Marketplace, check out https://service.sap.com/mss-staging for MSS.
regards,
venkat.

Air mobile best way to implement drag and drop

Hi all,
I'm developing an application which allows people to drag and drop certain panels.
But the dragmanager isn't optimized for the air mobile platform.
What is the best way to implement drag and drop at the moment?
Write it all yourself or are their some utility classes that can help?

Hi all,
I'm developing an application which allows people to drag and drop certain panels.
But the dragmanager isn't optimized for the air mobile platform.
What is the best way to implement drag and drop at the moment?
Write it all yourself or are their some utility classes that can help?

How to implement classes and methods in badi's ?

how to implement classes and methods in badi's? and where i have to write the code based on the requirement?can anyone explain me briefly?

Hi
Every BADI by default Implements an INTERFACE which already contains some methods with parameters.
So you have to find the relavenet method based on the related paramters (by checking the fields in that paramters) you have to double click on the method and to write the code.
see the doc
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activateadapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
Reward points for useful Answers
Regards
Anji
Message was edited by:
Anji Reddy Vangala

Creating stubs for a java class which implements ejbobject and ejbHome

Hi,
I am using the weblogic rmic utility to generate WLStub of a class which implements
EJBHome and EJBObject. The stubs are being generated with the name...WLStub261b2l255i2g1h1324e2u702w6fn1t.class
rather than with the name_WLStub as it should be and as the server wants it to
be when I try to bind this object using JNDI.
I appreciate your help.
Thanks,
Kamps

Have you tried the -nomanglednames option as from:
Usage: java weblogic.rmic [options] <classes>...
where options include:
-help Print this help message.
-version Print version information.
-d <dir> Target (top-level) directory for compilation.
-nontransactional Suspends the transaction before making the
RMI call and resumes after
-verbosemethods Instruments proxies to print debug info to
std err.
-descriptor <example> Associates or creates a descriptor for each
remote class.
-nomanglednames Don't mangle the names of the stubs and
skeletons.
kamps wrote:
>
Hi,
I am using the weblogic rmic utility to generate WLStub of a class which implements
EJBHome and EJBObject. The stubs are being generated with the name...WLStub261b2l255i2g1h1324e2u702w6fn1t.class
rather than with the name_WLStub as it should be and as the server wants it to
be when I try to bind this object using JNDI.
I appreciate your help.
Thanks,
Kamps

Implementing MSS and PCR

Similar Messages

Maybe you are looking for