Implementing MSS

Hello,
We are implementing MSS on EP7.0 but when I goto Manager Self Service ...I dont see employees under the manager....we are not using chief positions in the org. structure ...how can I configure this..?
Also how do i configure various reports in ECC toshow up on the portal...?
Any help would be highly appreciated.

Hi Anil.
MSS - Not using Chief Position
This might give u some idea.
Regards,
Manoj.

Similar Messages

  • Error implementing MSS

    Hi,
    I'm trying to implement MSS on EP SP9.
    I just downloaded MSS ZIP file called BPMSS601_18-20001489.ZIP from Portal Content Portofolio. When I try to deploy this ZIP file with SDM, this error appears:
    com.sap.sdm.util.sduread.IllFormattedSduFileException: The information about the development component
    found in the SD file is either missing or incomplete!
    Manifest attributes are missing or have badly formatted value:
    attribute keylocation is missing
    attribute keyname is missing
    attribute keyvendor is missing
    attribute keycounter is missing
    I'm doing somethig wrong?? Anyone knows the right way to install or deploy on EP MSS ZIP file I downloaded. Please I need to do it quickly!
    Thanks in advance,
    Arnau

    Hello,
    I use the Sneak Preview Web AS Java + Portal SP16 and chose the package MSS12_0-10002964.sca.zip (plus the according PCUIGP package). Deployment went fine, so you might consider using this package.
    Regards,
    Sebastian

  • Implementing MSS in EP 6.0 with ECC 6.0 as back end.

    hi,
        I am implementing MSS in EP with ECC 6.0. what are the configuration should I have to do in ECC 6.0 to implement MSS. Please provide me details as to what are the steps for configurations.
    Thanks & Regards,
    Ramesh

    Hi Ramesh
    Implementation steps for MSS:
    1 - Deploy PCUI .sca to your J2EE Engine via SDM
    2 - Deploy MSS .sca to your J2EE Engine via SDM
    3 - Make sure you have a SLD available, or you can enable the local SLD on your Portal J2EE instance 
    via http://localhost:port/sld and login as Administrator or J2EE_ADMIN and run the auto import.
    4 - Define your ECC server in the SLD as a new WAS ABAP instance and define all the settings via the Wizard.
    5 - Use the WebDynpro explorer to configure the Jco destinations to use the new WAS ABAP instance in your SLD
    6 - Define the system definitions as per the MSS documentation for alias SAP_WebDynpro_XSS and
    others
    7 - Assign Employee role from PCD to your Portal user and assign the relevant profile to your backend user in ECC.
    8 - Use transaction pa30 to add a communications infotype entry to map your username to an employee in the hierarchy.
    MSS 60.1 config instructions:
    https://www2.iviewstudio.com/support_content/_17011/BP_MSS_ERP04_601_EN.pdf
    Hope this helps.
    Regards
    Yoga
    PS:Reward points for useful answers

  • Implementing MSS and PCR

    Hello Every one,
    Can any one please point me to good documentation on how to enable PCR for MSS.
    If any one has step by step implementation of MSS . Can you please forward me.
    Thanks,
    Boiler

    Refer [this|http://www.google.co.in/search?hl=en&q=HCMProcessesandFormsfiletype%3Apdf&meta=&aq=f&oq=] for documentation.
    Regards
    Shital

  • How to increase the number of rows in Status Oveview iView in MSS?

    Hi
    We have implemented MSS and have a question regarding Status overview iview.
    The standard status overview iview of the team workset has 5 rows and we have to scroll using the arrow buttons to select/view a request.
    Now can anyone explain me how to increase the number of rows in this iview? Is this somthing that has to be accoplished through web dynpro customization?
    I checked the options in iView property and do not see any option to increase the number of rows.
    please help
    Thanks
    -Michael

    Hi Micheal,
    Well, I am not really sure, if you could accomplish this using customizing, but I am sure that you can accomplish this using the JDI. Well, you can extract the application's source code using JDI and then change the required display rows property and republish it.
    Am not really sure if this is suggestable method for this requirement,but it can be achieved using this JDI stuff.
    Regards
    <b>Raja Sekhar</b><i></i>

  • Error while pointing to Custom MSS Component

    Hello,
    We are implementing MSS on Portal. I have Z copied the standard MSS Webdynpro Component HRMSS_C_CATS_APPR_DASHBRD. To point to the custom one in the Homepage, I have the Custom Component Configuration ZHRMSS_HOMEPAGE_OVP, in which when I refer to the Custom Webdynpro Component created, I get the Error : 'Component <z component name> of UIBB (Window Name) implements an Invalid Interface'.
    What can be causing this?
    Any help would be highly Appreciated.

    Try closing and reopening the project. This is a common issue with Web Dynpro projects and closing and reopening tends to fix it.

  • Portal Version (SP level) required to run MSS 1.41

    Hi,
    Client is looking to implement MSS. Existing landscape consists of ECC 6 with EHP4 with Portal (7.0 SP15). To implement MSS 1.41 do we need to upgrade the portal to a higher SP level?
    We found the wiki link [WIKI|https://wiki.sdn.sap.com/wiki/display/ERPHCM/HOW%20TO%20GET%20RID%20OF%20SP%20STACK%20MISMATCH%20ISSUES] which suggests that we have a portal with atleast SP 17.
    Do we need to update the existing portal to SP 17?
    Thanks,
    Arun E V

    Hi Arun,
    Please go thru this [https://www.sdn.sap.com/irj/scn/wiki?path=/display/erphcm/howTOGETRIDOFSPSTACKMISMATCHISSUES]
    it will give you an idea what is used for latest MSS
    let meknow if you need any help.
    best regards
    Vijay

  • Reports and applications WEB ABAP in MSS for BP 1.41

    Good Night.
    I am implementing MSS with BP 1.41, ECC 604 and Portal 701. I need publish a report created in ABAP and two applications WEB Dynpro ABAP in the area of Overview of the Manager.
    Ie. I want that in the area of navegation appear the Application Customer.
    And the Workset Service Map appear the two applications and the report Z created.
    What i should do?
    Regards

    In latest version of WD ABAP based appraisals, you can change the layout through configuration in spro under -->> Personnel Management -->> Personnel Development -->> Objective settings and appraisals -->> Define tab and process configuration for templates.
    However, you need to activate the switches HCM_OSA_CI_1 in order to do the above configuration using the node otherwise the node will not be visible.
    Please read the documentation as much as possible in service marketplace and help.sap.com. There is lot of custumization which can be achieved using WD ABAP.
    Regards,
    Anil Kumar

  • Name of services behind MSS My Staff Worksets

    I am doing some custom work.  The desire is use the standard SAP functions that are called by the services behind MSS Mystaff Worksets.   However, I need to know the names for the services or how to determine the name of a service?
    Currently on Version 7.0.  We have not implemented MSS.  We have implemented ESS.

    I don't think this is a real solution though.  You don't say whether you mean a soft reset, a hard reset, or a factory conditions reset.  I'm going to ignore the possibility of a soft reset since that is only for gaining access to the router, which I already have. 
    A hard reset of the router carries with it too much danger of complete network failure for most people.  Like most folks, I have Internet through a local monopolist that requires me to use their modem, which also includes a router and a wireless component, and thus my Airport Extreme is set up so as to avoid using the monopolists gear.  For me, this is all very complicated and it has failed before requiring me to call the monopolist, wait hours online, or days for someone to come and fix it, because the one piece of gear I have no access to at all, is the monopolists modem/router.  I would be extremely nervous about resetting the router and losing those settings, and it seems really unlikely to me that I should have to. 
    This problem seems to be basically a 100% software-based, (probably bonjour-based), Apple software issue.
    My Airport Extreme is completely accessible by me at an admin level and controls the network in my house.  My computers are all accessible and I have Admin access on all of them as well.  Given that previous fixes for this problem were about flushing the mDNS cache, and that this trick is now not possible on Yosemite, it seems to me that this is really a software based Bonjour problem that Apple should be able to fix or that someone out there knows how to do the same kind of bonjour flushing on Yosemite that was possible on older OS's. 

  • Adobe form MSS PCR senarios  not working with Portal SSL

    Hi All,
    we have implemented MSS PCR  senarios Nw04 with ERP2004 system.
    every thing is working fine when use http protocal for portal acess.
    Now we try to implement ssl for portal. so started implemnation and done in portal side, after that when try access any senario forms , The adobe form is not opening for editing, its throwing  error
    <b>The initial exception that caused the request to fail, was:
       java.net.ConnectException: Connection refused: connect
        at java.net.PlainSocketImpl.socketConnect(Native Method)
        at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
        at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
        at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
        at java.net.Socket.connect(Socket.java:461)
        ... 47 more</b>
    its very urgent anybody can help out this, what settings ot be done on R/3 server and Portal and ADS server
    Thanks in advance
    Gopal

    Hello Gopal,
    You would only need an https connecion between the browser and the portal server if you are only concerned with the MSS applications. You need to have SSL configured from the portal to ADS server had you implemented some custom scenarios like certification, digital signature etc. But, considering your MSS issue, you do not need to worry about it untill and otherwise your landscape demands you to do so for any security reason.
    Well, you might have already gone through the following link, incase not, please go through the link to find out more on how to confugre SSL on the j2ee engine:
    http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm<a href="http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm</a>

  • Problem in MSS (My Staff- Personal change request )

    Hi,
    i am configuring MSS in EP6.0, backend is MySAPERP 2004,ECC5.0.
    On going to My Staff-->Personal Change Request -->New Request-> i select the employee and get lots of options like request for promotion, Internal Transfer, separation etc. However on clicking on any of these, i get a critical error saying "Error in try-catch block - Template could not be retrieved."
    Can anyone who has implemented MSS, help me out with this..
    Thanks,
    Aditi

    Hi Aditi,
               Try to login with some another manager test id's. some time the test id's get locked at backend. that time such a type of error displays.
               first clear your cache and then try out.
    Regards,
    Rahul S.

  • How to increase performance of adobe forms of MSS Business package

    Hi
    We have implemented MSS business package with  PCR adobe forms.
    Portal NW04 SP18, ERP 2004 , ADS is Nw04sp16 and abode reader 7.0.7.
    we have develped own PCR using existing ISR frame work.
    every thing working fine.but user facing performance problem like some times while opening pcr form ,browser gets hang up.
    Is there any way to increase performance of adobe forms of PCR.
    thanks In advance
    Gopal

    Hi!
    Interactive Forms need a lot of performance on the client side. If the client hangy up I think this is realted to client issues.
    Also I would update the forms server to be the same version as the other NW components (Portal).
    Sigi

  • MSS 60.1 Employee Documents iView problem

    Hi guys!
    I have implemented MSS BP ver. 60.1.19 and have problem with Employee Documents iView. It points on non-existing KM folder. However, if I would create it, it wouldn't help, because the portal creates user home folders in another path than the iView uses. Have someone of you solved this problem?
    Thanx for answers!
    Peter

    We had this problem and SAP gave us some new PAR files which fixed the problem.

  • MSS Address field contains Colon

    Dear All,
    We are implementing MSS. Under Team Information -->Employee Information --> general Information >Personal Data iView, the address lines contain a " : "(colon) . When I check the application in the Content Administration>Web Dynpro>mss~eepro>GeneralInformation Application and run it the display is with out the colon (" : "). Kindly help me in removing the colon.
    Regards
    Sivaprasath

    Hi Bala ,
    I have checked the DC, all the elements are TextView(I am using the standard SAP Application for MSS: DC Name : sap.com/mss~eepro, Application Name: GeneralInformation
    Any help in this regards is highly appreiciable.
    Thanks And Regards
    Sivaprasath.N

  • MSS General Data iView

    Hi To all,
    I'm implementing MSS 60.1.5 <b>(No WebDynpro)</b>
    I have a problem with GeneraData iView
    (com.sap.pct.hcm.eeprofilegeneraldata.default)
    It's a JSP and it utilize the RFC HRWPC_RFC_EP_READ_GENERALDATA
    The problem is that the iView do not show in a correct way the data. I.E. next to Employee SubArea(description) show the office adress, or next to salary class(description) show the value of the Employee status.
    Someone know how can I reorganize the view?
    Thanks in advance
    Dom

    Hi,
            Can you help me regarding MSS iview customization (based on par and not webDynpro).There is one iview General data in which we have to add one new field.For that a new function Module is created in the Backend R/3 by ABAP persons.The New Function module wraps the old function Module + the new Field.Do you know How this filed can be shown in our iview.
    Regards
    Imran

Maybe you are looking for