Implementing portal for SAP Reports

Dear All,
we have SAP 4.7 E1.1 system. we are thinking to implement the portal with an objective of only allowing the users to access the production reports online.
we have both Stardard reports & Z reports. we are under the impression that we can start using portsl with in a week after installation with little integration and interfacing.
we are not really sure of this. if our purpose served as we thought.
do we need any customization or the development required for the Z Reports.
what would be the implementation effort we have to do for both standard and Z.
please advise.
Regards,
Ramakrishna Reddy

Option1: Change each of your Z reports into a transaction code and then build an iView for the reports and then a role that contains the iViews.
Option 2: Create a role in PFCG which contains the reports. This will build transactions for you. Make a single iView in the portal that launches transaction SMEN. All done.
Cheers

Similar Messages

  • Implementation Guide for SAP EWM

    Friends,
    I need to find Implementation Guide for SAP EWM ver urgently. I am not sure where is the guid. If any one of you have used it, Can you please send the link or address.
    Thanks.Raj

    Rajshekar
    I think that you have had the answer to your question. I am trying to get people to keep the forum tidy. If you have what you require could you award you points if you want to and mark your question as answered.
    This helps everybody as there are at the moment 48 pages of open questions and if people do not close them the forum will grow and then people like me will not go through all of the pages as it takes too long and some people will not get answers to their questions.
    Thank you
    Frenchy

  • ASAP Implementation Roadmap for SAP Exchange Infrastructure

    Does anyone know if the "ASAP Implementation Roadmap for SAP Exchange Infrastructure" is still available somewhere?
    I'm looking for templates for documenting XI flows.
    thanks!

    hi,
    try this link:
    https://websmp109.sap-ag.de/~sapidb/011000358700004919702004E
    Regards,
    Michal Krawczyk
    http://mypigenie.com - XI/PI FAQ

  • Implementing portal for multi lingual rollout

    Hello Experts-
    Can any one point me to good documents or articles for multi lingual implementations of portals for EP 7.0
    Thanks,
    Raj.

    SAP Help Links:
    http://help.sap.com/saphelp_nw70/helpdata/EN/74/641640b7b6dd5fe10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/EN/21/9499f2f50ca44a85e9611f14fbdc21/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/EN/42/938297a5061d69e10000000a1553f6/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/ef/ca8f2c28ce11d5b2be0050da3f31b1/frameset.htm
    Translation of SAP Portal Content
    http://wiki.sdn.sap.com/wiki/display/SRM/TranslationofEnterprisePortalContent
    Internationalization of Webdynpro applications
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c6cfad90-0201-0010-a5b8-8f9486346059?QuickLink=index&overridelayout=true
    Internationalization in NWDS
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4f5b88e5-0601-0010-cd99-8b88a4d92816?QuickLink=index&overridelayout=true
    Internationalization in WD4A applications
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c069b075-e48f-2c10-66ba-f57442c9076c?QuickLink=index&overridelayout=true

  • Transaction code for SAP reports

    Hello All,
    What is the transaction code which displays SAP reports?
    I saw in SDN forums but unable to track it down.
    Can somebody help me?
    Thanks.
    Best Regards,
    Subhakanth

    Hi Vishnu,
    Thanks for your reply.
    But actually I wanted to see all the report names in a menu for a corresponding area i.e., let say Plant maintenance area or Project system area etc...
    Do you know anything like above?
    Thanks
    Best Regards,
    Subhakanth

  • Implementing CMMI for SAP

    Hi,
    does any one have experience in implemention/ mapping the CMMI practices with SAP.
    Audit check list created for SAP

    [email protected]

  • Required Implementation Guide for SAP Netweaver BI

    Hi,
    I need an Implementation Guide of SAP Netweaver BI.
    Thank you,
    Best Regards,
    Shailu.

    hello,
    as i said please search in SDN.
    BI 7 Blogs: Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
    Installation Info: https://websmp205.sap-ag.de/installNW70
    Troubleshoot BI 7 frontend installation: Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
    Installation & Upgrade guides: https://websmp206.sap-ag.de/instguides
    https://websmp205.sap-ag.de/~sapidb/011000358700005412792005E.pdf
    Check some more info at:
    Re: Urgent Help: Configuration Documents & Blue Print Documents for BI & BW
    BI 7 User Guide
    Regards,
    Dhanya

  • Implementation Activities for SAP MM

    hi,
    Can any one please tell me what all activities are required to be done in SAP MM Implementation/Realization as I am working on my first project, I need to understand and give a time estimate for SAP MM Implementation.
    Regards,
    Amit

    Hi
    See the below link for compleate config steps for MM
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
    nagesh

  • Implementation Steps for SAP Business One..

    Hello everyone,
    Can I have any link where I can get the implementation process(step-by-step) for SAP B1  right from the beginning?
    regards
    Raj

    Hi Raj,
    you could start with the ['Best practise guide' |https://sapneth4.wdf.sap.corp/sapidb/011000358700001151332007E.pdf] & then check out the ['Accelerated Implementation webcast'|https://sapneth4.wdf.sap.corp/sapidb/011000358700000022142007E.wrf].
    You will find a wealth of links & documents in the [Documentation Resource Centre |https://sapneth4.wdf.sap.corp/smb/sbo/documentation]on the SMP.
    All the best,
    Kerstin

  • Language settings in Portal for WAD reports

    hI,
    In WAD 3.x when we execute the report in the URL we can see language =EN, (https://inls51556188a:6001/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&TEMPLATE_ID=ZLUMM_Q100_TPL01)so even when the user browser settings are in German still the report gets displayed in English where as when the user login in German and  execute the report in WAD 7.0 it displaying the techical names for text data and infoobjects names as there is no text data maintained in German.
    Is there a way to fix the language in the iView of the WebTemplates directly in the Portal.If so how can this be done?
    Thanks ,
    Sany

    HI,
    Now there are two options that you can use to over come this:
    1. If the concern is just about the query related then you can do 1 more thing. In the query designer login- with language german, Open your query, you will see the technical names of the chars and key figures (calculated, restricted and formula, selection's as well), now here u need to maintain the description for each of them in english (i.e. simply type the text in general tab for each of them) and save the query.
    2. There is table for info-object's text manintainece you need to maintaine the description of info-object's used in your report's in english with language key set to German.
    thanks in advance
    regards
    Edited by: venugopal vadlamudi on Jun 27, 2008 8:53 AM

  • Learning Portal for SAP LSO

    Hi,
    We are implementing SAP Learning Solutions in our org.
    According to the information i read in the forum, apart from the R/3, Learning Portal is used on EP.
    My understanding is :
    The Learnign Portal is the entry point for Learners in SAP LSO. And one has to call the BSP application "HCM_LEARNING" from EP through a BSP iView and it will call the Learning Portal of LSO.
    This learnig portal has features like,
    Searching the course catalog, Book/cancel course participation etc.
    is my understanding correct ?
    I also want to know Is there any Web Dynpro for ABAP component also involved in Learning Portal or the BSP application HCM_LEARNING itself takes care of all the functionalities.
    Please help.

    Hi Rohit
    Difference: SAP Learning Solution - Training and Event Manag
    All of the settings required for the SAP Learning Solution are contained under SAP Learning Solution in the sections Training Management and Learning Portal and Authoring Environment.
    The activities in the sections that follow do not apply to the SAP Learning Solution, but to Training and Event Management
    LSO contains many additional functionalities and the portal is based on BSP Application.
    In Authoring Environment, you can create course content or import the SCORM based contents in the same for playing in the content player. You have the options of offline player etc.
    Customize the followup functions.
    There is no Webdynpro involved in the learning portal however in EHP4 and above, the webdynpro is used in the
    administrator portal and instructor portal and there are many new functionalities being added in EHP4 and above which is the latest developments.
    Learning portals in all the releases is based on BSP Application HCM_LEARNING.
    Below releases, you can have the ESS integrated via PV7i and PV8i.
    Rest you can refer SAP help websites:
    For TEM -
    http://help.sap.com/saphelp_47x200/helpdata/en/77/bff8ab4a2911d182b80000e829fbfe/frameset.htm
    For LSO -
    http://help.sap.com/erp2005_ehp_02/helpdata/en/b8/b56c3c50ac854ce10000000a11405a/frameset.htm
    This will help you understanding the concepts in more details.
    Hope this helps.
    Best Regards,
    Chetan

  • Smartform Implementation issue for the report  RFKORD50

    Hi,
    I have a requirement to implement a smartform for FI Invoice. 
    This smartform should be configured in OB96 for the print program RFKORD50.
    Currently the SAP Script F140_DOCU_EXC_01 has been configured for Standard print program RFKORD50.
    This SAP Script should be replaced with Smartform. But the issue is the report  RFKORD50 is designed to
    call only a SAP Scrip. Is there any better way to trigger the Smartform other than modifying the standard program?
    Thanks,
    Sailaja.A

    Hi,
    One of the very tough task, when it comes to migrate a script into Smartforms .. With a satndard print program ..
    You have a option on samrtform screen , just to migrate a Sapscript into Smartform .. But it is just a migration of Layout.. means just creation of WINDOWS and pages.. All the elements and text node creation still you need to do ..
    But one of the major challenge is to Customize your print program..
    So i will suggest you to create a Z copy of RFKORD50.. as print prgm .. Then you can feal better
    Now keep all the data selection part as it is .. collect it in different structure, then call your samrtform..
    and before calling your smartform, prepare your layout ..
    Very Imp suggestion, try to work on small small task.

  • Tcode for SAP report??

    Dear All,
    Can you pls tellme the transaction code to see selective reports.
    I know that SAP1 shows all the reports. However I am seeking for TCODE that can give us option to see our selected/desired report.
    for example: I want to see report RHRLAT0.
    I appreciate your time.
    Thankyou
    Sambal

    Hello,
    I am not aware of anywhere from the welcome screen in SAP that you can enter the report name and have it execute.  You can use the suggestion previously mentioned to display the technical names of the menu options, and these are the transaction codes, which in turn are associated with the execution of the report.
    Of course executing from SE38 or SA38 is also possible, but discouraged in productive environments.
    If you know the name of the report and do not know the transaction code, you can use the option mentioned previously referring to SE80.
    The last means that I know of is to use either SE93 or using SM30 look at the table TSTC.
    Either of these will give you the option of entering the report name and then upon execution you will be able to see if there is an assigned transaction code.  This you can then use in the initial secret (in the transaction code field) or create a favorite by intreating the transaction code into the favorites directly.
    Hope this helps.

  • HACMP Implementation Checklist For SAP NW2004s

    Hi:
    Does anyone have a checklist for implementing IBM's HACMP on ERP2005? Beside following SAP installation guide, are there special steps that I should be aware of?
    Thanks

    Hi,
    Our customer has HACMP, however haven't found any checklist, if you haven't used HACMP before, you may check this link:
    http://www.redbooks.ibm.com/abstracts/sg244498.html?Open
    Download the book and check chapter 8.
    Regards,
    Siddhesh

  • Changing Variant Pop up window name in Portal for BI reports

    Hi All,
    I have integrated Bex analyzer with portal, from which when i select variant it will open pop window to select options.. here i want to change the  pop window name as " sale order report name itself. I have changed the name of the report and it is showing in internet explorer...
    when i select variant...im getting Bex internet explorer name, instead of sales order report name.
    Please suggest where can i change this settings in portal or BIW level.
    Thanks
    Pradeep

    See if this link helps
    http://www.vrusso.com.br/blog/2011/03/unobtrusive-confirm-javascript-replacement-with-jquery-ui-dialog/Effectively you are calling a jQuery dialog box with custom buttons and events. Optionally you can hide the close button(or even the titlebar) and prevent closing the modal window when escape key is pressed.

Maybe you are looking for

  • Why does my password for the app store work for updates but not for new purchases

    Very frustrated. I've been trying to download Evernote for days now and it keeps telling me my password is incorrect. I use the same password to update apps on my phone and it works fine. Using the 4S Any ideas why? Thanks Michael

  • Using a JSpinner in JBuilder

    I am new to using JBuilder and I am trying to use a JSpinner in my application but I am unable to compile and I get this message: "Frame1.java": Error #: 300 : class JSpinner not found in class testing.Frame1 at line 41, column 3 I am using JBuilder

  • Why are my iTunes songs switched around?

    Hi, why is my music messed up in my iTunes??? I play one song and even though it has the right album cover and the right name of the song I want to listen to it plays a completely different song! WHAT'S UP WITH THAT?!?! I also have to have wifi now?

  • HT5085 itunes match not available

    I paid for itunes match and now I cannot locate it on my iphone. Yes setting is on and  all my music is now gone and I have no music to play now. Also itunes match does not appear in my icloud. I only have 1 apple ID. The payment went through OK. How

  • Data disappear in table control when hiting Enter

    Dear Expert, Please help Me. I have Made one Table Control, For this First of all i Defined data in top page like this: data: begin of iloc occurs 10,       lnsl,       lgort like mseg-lgort,       end of iloc. data:wloc like iloc. controls: stoloc t