Implenting webdynpro as a Calable Object with GP Interface

Hi People,
I have created a webdynpro application, and want to implement it as a callable object with GP interface,
I have added all the required DC's.
There is no error in Build,
There in no error in Deployment,
But when I try to create the Callable object of the application deployed,
on selection of the application it says,
<b>
Cannot read callable object description from component: Failed to create delegate for custom controller lti.com.testwd1.TestWDComp1Interface. (Hint: Is the corresponding DC deployed correctly? Does the DC contain the component?)</b>
and does not allow me to go next,
Please Suggest, I am not even able to find the error or cause of this behaviour,
Thanks in advance,
Deepak

Hi Deepak,
When you try to create a callable object of type webdynpro with GP interface, GP will call the getDescription method of the webdynpro interface controller.
I guess you are getting some problem with this method. Check your code written in this method.
Also check whether your application has been deployed successfully on the server from the visual administrator.
Regards,
Bhavik

Similar Messages

Connect webdynpro callable object with ms sql server 2000

Hi all
how connect webdynpro callable object with ms sql server 2000?
How can I register on the portal as an additional connection?
thank you very much!

Thanks for your answers, Now I have the following problem, to develop this code:
try {
          InitialContext iC = new InitialContext();
          DataSource dataSource = (DataSource)iC.lookup("jdbc/ConnectionAlias");
          Connection con = dataSource.getConnection();
          java.sql.Statement stmt = con.createStatement();
          ResultSet rs = stmt.executeQuery("select * from ejemplo");
          while (rs.next()){
               com.sap.test.sql.testsql.wdp.IPrivateTestIViewView.IDatosElement
                                                         DatosElement =
                                                         wdContext.nodeDatos()
                                                         .createDatosElement();
               DatosElement.setId(rs.getString("id"));
               DatosElement.setNom(rs.getString("nom"));
               DatosElement.setNum(rs.getInt("num"));
     }catch (SQLException e) {
          wdContext.currentContextElement().setB(e.getMessage());
     }catch (Exception e){
          wdContext.currentContextElement().setB(e.getMessage());
and shows me the following exception
ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
the data that you place in the visual administrator were:
Drivers: com.sap.aii.af.jmsproviderlib (msutil.jar , mssqlserver.jar , msbase.jar)
DataSources: sap.com/JDBCConnector_MyDatasource.xml
               Name: MyDatasource
               Alias: ConnectionAlias
               DriverName: com.sap.aii.af.jmsproviderlib
               JDBC Version: 1.x
               Driver Class: com.microsoft.jdbc.sqlserver.SQLServerDriver
               Database URL: jdbc:microsoft:sqlserver://181.42.101.219:1433;DatabaseName=test
               User: sa
               Password: abcd1234
did not know the cause of the problem
thanks!

How to get a "com.sap.tc.webdynpro.progmodel.api.IWDView" object

hi,everybody,
     As we all know, there is a com.sap.tc.webdynpro.progmodel.api.IWDView object in wdDoModifyView() parameters.We can use the IWDView object in the method or after the method.But in my project, I want to use the IWDView object before wdDoModifyView() method.I don't know how to create a IWDView object. Would you please help me.Thank you!

Hi daniel,
               wdModifyView is called by framework while rendering the view & IWDView is used for it. Before wdDoModifyView its not possible according to me , may be u can check with armin.
Hi Manoj,
               First of all, even if u declare a variable , u can't initializae it before weDoModifyView. Apart from that its always suggested , not to access the IWDView outside the wdModifyView . i think that's why wdDoModifyView is static & called everytime ,u do anything with the view.
regards
Sumit

MapBuilder Error:Can not find a GeoRaster object with specified rdt and rid

Hello,
I can't GeoRaster data in the preview of the MapBuilder and MapViewer. The GeoRasterViewer shows the Raster images without problems.
MapBuilders error message:
19.11.2008 13:07:11 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
     at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
     at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
19.11.2008 13:07:11 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
19.11.2008 13:07:11 oracle.sdovis.MapMaker buildDataMBR
WARNUNG: null MBR resulted from buildDataMBR.
The errror message of MapViewer is nearly the same with some more informations about the spatial query and the coordintes of the query window. If I run that spatial query in the sqldeveloper it returns a result!
I did following stebs:
- saved a tiff-Image in a GeoRaster table with pyramid an tiled images.
- checked the sdo_geom_metadata --> they are correct
- checked the sdo_georaster object for the rdt table name and rasterid --> they are correct
- checked the rdt table --> objects with that rid are saved
- checked the mdsys.sdo_geor_sysdata table --> entry is correct
- validate the geraster with the sdo_geor.validategeoraster function --> object is valid
- updated the spatial extend of the image and try again the preview functio--> the same error
The databse server is a virtual Linux server with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit.
The web server is a Window 2003 R2 Server with a weblogic server and mapviewer patch 5 (Ver1033p5_B081010).
For a test I did the same (the same table script, the same raster data, the same import method) on a developer pc (WinXP Pro SP2) with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 (32bit) the same mapbuilder version but with the MapViewer QuickStartKid and it works fine!!!
Has anyone an idea?
Greeting,
Cord
Edited by: Corti on Nov 19, 2008 2:14 PM

Hi Joao,
Thanks so far.
I'm previewing a GeoRaster theme. I created it with the MapBuilder GeoRaster wizard. The theme difinition is (out of the export file):
RAS_DGK|
null|
RAS_DGK|
GEORASTER|
<?xml version="1.0" standalone="yes"?>
<styling_rules theme_type="georaster">
</styling_rules>|
(GeoRaster table name is "RAS_DGK", theme name is also "RAS_DGK")
I get following log information:
preview without a coordinate or scale:
MapBuilder Error (as pop up): MAPVIEWER 01005: no spatial data to render
log file:
20.11.2008 10:17:27 oracle.sdovis.LoadThemeData run
FEINER: LoadThemeData running thread: Thread-43
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Original query window: -Infinity,-Infinity,NaN,NaN
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: [Query] select grt.GEORASTER, grt.GEORASTER.metadata.getClobVal() from RAS_DGK grt
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Fetch size: 100
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
     at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
     at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:17:27 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:17:27 oracle.sdovis.MapMaker buildDataMBR
WARNUNG: null MBR resulted from buildDataMBR.
preview with a center coordinate of the image and a scale:
20.11.2008 10:18:43 oracle.sdovis.SRS getOptimalQueryWindow
AM FEINSTEN: *** isGeodetic=false, unit=METER
20.11.2008 10:18:43 oracle.sdovis.LoadThemeData run
FEINER: LoadThemeData running thread: Thread-45
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Original query window: 2550045.7746478873,5608500.0,2551954.2253521127,5609500.0
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: [Query] select grt.GEORASTER, grt.GEORASTER.metadata.getClobVal() from RAS_DGK grt WHERE MDSYS.SDO_FILTER(grt.GEORASTER.spatialextent, MDSYS.SDO_GEOMETRY(2003, 31466, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3), MDSYS.SDO_ORDINATE_ARRAY(?,?,?,?)), 'querytype=WINDOW') = 'TRUE'
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Fetch size: 100
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
     at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
     at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:18:43 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:18:43 oracle.sdovis.DBMapMaker renderEm
INFO: **** time spent on loading features: 234ms.
20.11.2008 10:18:43 oracle.sdovis.RenderingEngine prepareForRendering
AM FEINSTEN: xfm: 0.284 0.0 0.0 -0.284 -724212.9999999999 1593097.9999999998
20.11.2008 10:18:43 oracle.sdovis.ImageRenderer renderGeoRasterTheme
WARNUNG: GeoRaster theme RAS_DGK has no rendered images.
20.11.2008 10:18:43 oracle.sdovis.VectorRenderer render
FEINER: time to render theme RAS_DGK with 0 styled features: 0ms
20.11.2008 10:18:43 oracle.sdovis.DBMapMaker renderEm
INFO: **** time spent on rendering: 16ms
If I run the sql statement in the log file, it returns a result.
select grt.georid, grt.GEORASTER, grt.GEORASTER.metadata.getClobVal()
from ras_dgk grt
WHERE MDSYS.SDO_FILTER(grt.GEORASTER.spatialextent,
MDSYS.SDO_GEOMETRY(2003, 31466, NULL,
MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3),
MDSYS.SDO_ORDINATE_ARRAY(2550045.7746478873,5608500.0,2551954.2253521127,5609500.0)), 'querytype=WINDOW') = 'TRUE';
GEORID
2
GEORASTER
MDSYS.SDO_GEORASTER(20001,MDSYS.SDO_GEOMETRY(2003,31466,null,MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,3),MDSYS.SDO_ORDINATE_ARRAY(2550000,5608000,2552000,5610000)),RDT_RAS_DGK,522,oracle.xdb.XMLType@194a7ec)
GEORASTER.metadata.getClobVal()
<georasterMetadata xmlns="http://xmlns.oracle.com/spatial/georaster">
<objectInfo>
<rasterType>20001</rasterType>
<isBlank>false</isBlank>
<defaultRed>1</defaultRed>
<defaultGreen>1</defaultGreen>
<defaultBlue>1</defaultBlue>
</objectInfo>
<rasterInfo>
<cellRepresentation>UNDEFINED</cellRepresentation>
<cellDepth>8BIT_U</cellDepth>
<totalDimensions>2</totalDimensions>
<dimensionSize type="ROW">
<size>6299</size>
</dimensionSize>
<dimensionSize type="COLUMN">
<size>6299</size>
</dimensionSize>
<ULTCoordinate>
<row>0</row>
<column>0</column>
</ULTCoordinate>
<blocking>
<type>REGULAR</type>
<totalRowBlocks>4</totalRowBlocks>
<totalColumnBlocks>4</totalColumnBlocks>
<rowBlockSize>2048</rowBlockSize>
<columnBlockSize>2048</columnBlockSize>
</blocking>
<interleaving>BSQ</interleaving>
<pyramid>
<type>DECREASE</type>
<resampling>NN</resampling>
<maxLevel>6</maxLevel>
</pyramid>
<compression>
<type>NONE</type>
</compression>
</rasterInfo>
<spatialReferenceInfo>
<isReferenced>true</isReferenced>
<SRID>31466</SRID>
<modelCoordinateLocation>UPPERLEFT</modelCoordinateLocation>
<modelType>FunctionalFitting</modelType>
<polynomialModel rowOff="0" columnOff="0" xOff="0" yOff="0" zOff="0" rowScale="1" columnScale="1" xScale="1" yScale="1" zScale="1">
<pPolynomial pType="1" nVars="2" order="1" nCoefficients="3">
<polynomialCoefficients>17668678.695368 0 -3.14949718277477</polynomialCoefficients>
</pPolynomial>
<qPolynomial pType="1" nVars="0" order="0" nCoefficients="1">
<polynomialCoefficients>1</polynomialCoefficients>
</qPolynomial>
<rPolynomial pType="1" nVars="2" order="1" nCoefficients="3">
<polynomialCoefficients>-8031218.31607409 3.14949718277477 0</polynomialCoefficients>
</rPolynomial>
<sPolynomial pType="1" nVars="0" order="0" nCoefficients="1">
<polynomialCoefficients>1</polynomialCoefficients>
</sPolynomial>
</polynomialModel>
</spatialReferenceInfo>
<layerInfo>
<layerDimension>BAND</layerDimension>
<subLayer>
<layerNumber>1</layerNumber>
<layerDimensionOrdinate>0</layerDimensionOrdinate>
<layerID>1</layerID>
<colorMap>
<colors>
<cell value="0" blue="255" red="255" green="255" alpha="255"/>
<cell value="1" blue="0" red="0" green="0" alpha="255"/>
</colors>
</colorMap>
</subLayer>
</layerInfo>
</georasterMetadata>
I checked also the content of rdt table and it contains entries with that raster id (= 522).
Finally the log file when I use the preview directly on the GeoRaster table without a theme:
20.11.2008 10:23:46 oracle.sdovis.LoadThemeData run
FEINER: LoadThemeData running thread: Thread-55
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Original query window: -Infinity,-Infinity,NaN,NaN
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: [Query] select grt.GEORASTER from RAS_DGK grt where grt.GEORASTER.rasterid = ? and grt.GEORASTER.rasterdatatable = ?
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Fetch size: 100
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
     at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
     at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:23:46 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:23:46 oracle.sdovis.MapMaker buildDataMBR
WARNUNG: null MBR resulted from buildDataMBR.
If you need more information - please ask for it.
Cord

Object with multiple states and slider in folio are rasterized, settings seem correct.

I am having trouble keeping An object with multiple text states from being rasterized, as well as a slider that is also rastering.
I have read that you are supposed to set the folio and article up to be .pdf and that the slider should have the vector option chosen.
I haven't found anything for the multi state object to for these settings.
What happens is when I output the folio to Adobe Content Viewer, only the text in those items is rasterized. All other text is crisp. Tested on both iPad Mini and iPad Retina and the both are blurry.
Is there a way to force the vector option? It seems even with the correct options selected it is still rastering the test in interactive elements.
Thanks!

Here is the MSO with the folio.
Here is the Slider with folio overlays panel.

Loading Objects with SQL*Loader

When loading a column object with SQL*Loader, is it possible to specify a column specific 'TERMINATED BY' clause in the control file?
I've successfully defined column-level termination characters for regular columns and nested tables, but can't seem to find any way of achieving the same result with column objects.

When loading a column object with SQL*Loader, is it possible to specify a column specific 'TERMINATED BY' clause in the control file?
I've successfully defined column-level termination characters for regular columns and nested tables, but can't seem to find any way of achieving the same result with column objects.

Enter a true account assignment object with revenues

Hi there,
At my current client site we implemented COPA - Costing Based. I mapped a few revenue accounts to COPA. Now when I try to make a posting in to COPA using FB70 . The system issues a error Message "Enter a true account assignment object with revenues" . I know the Prof Segment is the account assignment object its looking for and the system is not deriving it from the information I entered in the FB70 document. Am I missing somethig here? Did anyone out there face similar issue??
You inputs are highly appreciated!
Regards,
Siva Padallaparthy

Hi Siva,
Please check note 373823 for this error. Also please go through the long text of error message KI166. The solution of the error is mentioned in the long text itself.
Regards,
Abhisek

Enter a true account assignment object with revenues while reversing FB08

Hi All
When I am reversing the document through FB08 I am getting the warning messege "Enter a true account assignment object with revenues"
Message no. KI166
Diagnosis
You made an account assignment for 31211100, a revenue element, in controlling area 1000 to a cost center or profit center.
System Response
Cost centers and profit centers can carry revenues in the SAP system as statistics only. To ensure reconciliation between FI and CO for revenue element 31211100, a CO account assignment object must record the revenues as a real value. This object type is used for updating to the reconciliation ledger.
In principle, it is possible for the SAP system to automatically derive this CO account assignment object, the reconciliation object. However, all postings made in CO for costing-based Profitability Analysis are logged in the reconciliation ledger under "reconciliation object". In this manner, the reconciliation ledger identifies the exact values flowing into the operating profit. If you post reconciliation objects during revenue postings to cost centers or profit centers, you must do so while keeping the interpretation of the reconciliation ledger reports in mind. The sums of revenue postings to profitability segments, cost centers, and profit centers cannot be broken down further.
Procedure
To avoid posting to reconciliation objects, make account assignments to a real CO account assignment object.
If you want to post to reconciliation objects, you can change this message to a warning or a note for future users, or deactivate the message entirely. Use the Implementation Guide under "Controlling: General" and choose Change message control. Enter area KI and message number 166. If you do not enter an individual user here, the change is valid for all users.
It is not allowing me to reverse the document already posted.
Please guide
Thanks in Advance
Sonal

Hi,
Do you have this cost element maintained in OKB9 with a reference to an internal order or profitability segment? If yes, please look at the note 373823.
Regards,
Eli

Com.sap.tc.webdynpro.repository.RepositoryRtException: Repository Object

Dear All,
We are facing a problem in accessing a exception runtime error in portal application( i have the error log below). I have found the discussion in forum for same exception error, but while deploying object. whereas i am getting the error like "com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Repository Object --- does not exist"
But this error is not occurring all the time , but more often to the end users. Please help me out to fix this issue.
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Repository Object hrmd.iws.HrMasterData/ComponentInterface:HrMasterDataInterface associated via relation RepositoryObjectRelation(HrMasterData, UsedComponent) does not exist.
    at com.sap.tc.webdynpro.repository.RelationToOne.resolveTargets(RelationToOne.java:124)
    at com.sap.tc.webdynpro.repository.RelationToOne.mergeTargets(RelationToOne.java:108)
    at com.sap.tc.webdynpro.repository.RelationToOne.mergeTargets(RelationToOne.java:72)
    at com.sap.tc.webdynpro.repository.RelationToOne.getTarget(RelationToOne.java:174)
    at com.sap.tc.webdynpro.repository.RepositoryObject.getRelatedModelObject(RepositoryObject.java:348)
Edited by: Raja Gopal on Jul 16, 2010 5:50 PM

Hi tooCann,
Some times XML-Repository content in the database gets corrupted (XML not valid) during the upgrade. Therefore some WebDynpro applications (e.g. Universal Worklist (UWL)) may not work properly after the upgrade.
Undeploy your DC first via SDM and deploy again.
Check the SAP Note : <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_wd/~form/handler">986460</a>
Regards,
Mithu

Inserting a new row in a BC4J View Object with an attribute of type BFileDomain

Hi all,
I've to insert a row in a View Object with an attribute of type oracle.jbo.domain.BFileDomain.
I do this within an Application Module's method, which has an input parameter of type byte[]. This parameter will be the content of the BFILE.
What's the right way for doing that?
I've tried with the following code, but I've got an exception in committing the transaction:
public int serializeDocument(int codDomanda, int codSorgente, byte[] content, String est, int type, int cost, String title, String arg) throws JboException {
int code = 0;
//File f;
DocumentiTwoView = getDocumentiTwoView();
java.sql.Statement stmt = ((DBTransaction) getTransaction()).createStatement(1);
try {
Row docRow = DocumentiTwoView.createRow();
SequenceImpl seq = new SequenceImpl("documenti_seq", getDBTransaction());
Integer next = (Integer) seq.getData();
code = next.intValue();
docRow.setAttribute("Coddocumento", new Number(code));
docRow.setAttribute("Titolo", (String) title);
docRow.setAttribute("Argomento", (String) arg);
docRow.setAttribute("Costo", new Number(cost));
docRow.setAttribute("Tipo", new Number(type));
docRow.setAttribute("Coddomanda", new Number(codDomanda));
docRow.setAttribute("Codsorgente", new Number(codSorgente));
//f = new File("Doc" + code + "." + est)
BFILE src_lob = null;
ResultSet rset = null;
rset = stmt.executeQuery ("SELECT BFILENAME('DOC_DIR', 'Doc" + code + "." + est + "') FROM DUAL");
if (rset.next()) {
src_lob = ((OracleResultSet)rset).getBFILE(1);
BFileDomain bfd = new BFileDomain(src_lob);
bfd.setBytes(content);
bfd.saveToDatabase(getTransaction());
docRow.setAttribute("Contenuto", (BFileDomain) bfd);
catch (Exception ex) {
getTransaction().rollback();
throw new oracle.jbo.JboException("Impossibile creare il nuovo documento:\n" + ex.getMessage());
finally {
try {
stmt.close();
catch (Exception nex) {
try {
// Commit the whole transaction
getTransaction().commit();
catch (Exception e) {
e.printStackTrace();
getTransaction().rollback();
throw new JboException("Impossibile eseguire il commit della transazione:\n" + e.getMessage());
return code;
Thanks a lot in advance!
Christian
null

Odd, have you disabled caching and indirection? (NoIdentityMap, dontUseIndirection, or alwaysRefresh/disableCacheHits). If so, then this could be the issue.
Otherwise please include the sample code you use to perform this, and verify that you do not have any unusual code in your set/get methods or in descriptor events. Also turn TopLink logging on and include a sample. Also ensure that you do not modify your objects until after registering them in the unit of work, and only modify the unit of work clones.

How to copy objects from Pages (5.5.1) and paste it into Photoshop as a vector smart object with high resolution?

I recently have bought a new Macbook Pro (Version 10.10.1) with the OS X Yosemite. The computer comes with the new Pages (version 5.5.1).
Here is the problem: I like to create artwork using the shapes on Pages. Previously, on my old mac, I used Pages 4.3 to create objects, which I would copy then paste to Photoshop and it would become a vector smart object. However, in the new Pages (version 5.5.1), when I copy objects, they would appear on Photoshop as instead, a layer and it would not be in full resolution.
Also, I know there is nothing wrong with the Pages file itself because I have converted the document to PDF form and it is high resolution when inserted into Photoshop that way.
Does anyone know how I can copy individual objects from Pages (5.5.1) and paste it into Photoshop as a vector smart object with high resolution as I have done before?
Thanks!

ghotiz wrote:
copy the image and have it in a high-quality PNG format that does not include the background from the Pages document.
Oh, well if you don't actually need vector objects then it looks like this is possible. As I said earlier, Pages is putting a PNG on the clipboard. I tested it and it does paste into Photoshop as a transparent layer, because I can see the transparent background of the pasted PNG graphic if I either turn off all layers behind it in Photoshop, or if I start a new Photoshop document to paste into but make sure I choose Transparent for the Background Contents in the New Document dialog.

RE: multiple named objects with the same name andinterface

David,
First I will start by saying that this can be done by using named anchored
objects and registering them yourself in the name service. There is
documentation on how to do this. And by default you will get most of the
behavior you desire. When you do a lookup in the name service (BindObject
method) it will first look in the local partition and see if there is a
local copy and give you that copy. By anchoring the object and manually
registering it in the name service you are programmatically creating your
own SO without defining it as such in the development environment. BTW in
response to your item number 1. This should be the case there as well. If
your "mobile" object is in the same partition where the service object he is
calling resides, you should get a handle to the local instance of the
service object.
Here is the catch, if you make a bind object call and there is no local copy
you will get a handle to a remote copy but you can not be sure which one!
It end ups as more or less a random selection. Off the top of my head and
without going to the doc, I am pretty sure that when you register an
anchored object you can not limit it's visibility to "User".
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of David Foote
Sent: Monday, June 22, 1998 4:51 PM
To: [email protected]
Subject: multiple named objects with the same name and interface
All,
More than once, I have wished that Forte allowed you to place named
objects with the same name in more than one partition. There are two
situations in which this seems desirable:
1) Objects that are not distributed, but are mobile (passed by value to
remote objects), cannot safely reference a Service Object unless it has
environment visibility, but this forces the overhead of a remote method
call when it might not otherwise be necessary. If it were possible to
place a copy of the same Service Object (with user visibility) in each
partition, the overhead of a remote method call could be avoided. This
would only be useful for a service object whose state could be safely
replicated.
2) My second scenario also involves mobile objects referencing a Service
Object, but this time I would like the behavior of the called Service
Object to differ with the partition from which it is called.
This could be accomplished by placing Service Objects with the same name
and the same interface in each partition, but varying the implementation
with the partition.
Does anyone have any thoughts about why this would be a good thing or a
bad thing?
David N. Foote
Consultant
Get Your Private, Free Email at <a href=
"http://www.hotmail.com">http://www.hotmail.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

David,
First I will start by saying that this can be done by using named anchored
objects and registering them yourself in the name service. There is
documentation on how to do this. And by default you will get most of the
behavior you desire. When you do a lookup in the name service (BindObject
method) it will first look in the local partition and see if there is a
local copy and give you that copy. By anchoring the object and manually
registering it in the name service you are programmatically creating your
own SO without defining it as such in the development environment. BTW in
response to your item number 1. This should be the case there as well. If
your "mobile" object is in the same partition where the service object he is
calling resides, you should get a handle to the local instance of the
service object.
Here is the catch, if you make a bind object call and there is no local copy
you will get a handle to a remote copy but you can not be sure which one!
It end ups as more or less a random selection. Off the top of my head and
without going to the doc, I am pretty sure that when you register an
anchored object you can not limit it's visibility to "User".
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of David Foote
Sent: Monday, June 22, 1998 4:51 PM
To: [email protected]
Subject: multiple named objects with the same name and interface
All,
More than once, I have wished that Forte allowed you to place named
objects with the same name in more than one partition. There are two
situations in which this seems desirable:
1) Objects that are not distributed, but are mobile (passed by value to
remote objects), cannot safely reference a Service Object unless it has
environment visibility, but this forces the overhead of a remote method
call when it might not otherwise be necessary. If it were possible to
place a copy of the same Service Object (with user visibility) in each
partition, the overhead of a remote method call could be avoided. This
would only be useful for a service object whose state could be safely
replicated.
2) My second scenario also involves mobile objects referencing a Service
Object, but this time I would like the behavior of the called Service
Object to differ with the partition from which it is called.
This could be accomplished by placing Service Objects with the same name
and the same interface in each partition, but varying the implementation
with the partition.
Does anyone have any thoughts about why this would be a good thing or a
bad thing?
David N. Foote
Consultant
Get Your Private, Free Email at <a href=
"http://www.hotmail.com">http://www.hotmail.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

LR4.1 : "Edit-In" "Open as Smart Object with Photoshop..." feature doesn't work with 32bits

Hi there,
I am running LR4.1/CS5/ACR6.7 on a Win7 64bits system.
The feature "Edit-In" > "Open as Smart Object with Photoshop..." does work Ok with raw files (.NEF).
However, when i do try to use the same feature with 32 bits .TIFF files (which are output of the LR4.1's "Edit-In" > "Merge to HDR Pro in Photoshop..." other feature), nothing does happen (the Photoshop application windows does open but w.o the image that i've just selected).
I've used search engines and Adobe online help to see if there was any limit preventing the usage of this feature with 32 bits .TIF files but couldn't see such note.
Thanks for your help !
Albert

Thanks Rikk,
That did work with a DNG file :-)
I am working with very huge .TIF files (400MB), so i am wondering if size could be the main issue (although my PC has lots of HW resources).
I will explore the DNG way, a format which seems anyways to be very promising now with LR4.
In case anyone has an idea why it doesn't work the .TIF files, please shoot !

Object with gradient feather disappears upon export to pdf

I'm troubleshooting a file where an object with a gradient feather disappears from the exported .pdf file. The rest of the file is perfect. I've tried different .pdf presets. I've tried moving the offending object to its own layer at the bottom of the layer stack. I've tried copying all the art to a new file. I've tried grouping everything. Nothing is working. I can successfully export to .jpg format. I'm using InDesign CS5 on an iMac. Thanks for any suggestions.

InDesign file on the left, PDF on the right.

Unable to access the objects with out schema as prefix.. can any body help

Hi,
i am using 10g.I have one problem like i unable to get the table access with out mention prefix for that table.
but i created public synonym and gave all grants to all users also. but still i need to mention schema name as prefix otherwise it give the error..
can any body tell me reason and give me solution.
ex: owner:eiis table:eiis_wipstock
connect to: egps schema
in this position if i try with eiis.wipstock it gives error but if i mention like eiis.wiis_wipstock then its working fine.

Pl do not spam the forums with duplicate posts - Unable to access the objects with out schema as prefix.. can any body help

Implenting webdynpro as a Calable Object with GP Interface

Similar Messages

Maybe you are looking for