Implicit enhancement for report painter (CJE2 & GRR3 reports)

Hi,
We have a client requirement to add 5 fields (In selection screen) to report painter reports ( Reports of CJE3 and GRR3 ).We created Z reports as a copy of standard reports, added required 5 fields by implementing SAP notes and other settings.We have also done implicit enhancement for all these reports to make change in the behaviour of new fields.This is working fine in the development client but the problem is once we transport this to other client new reports get generated( With new name ) and implicit enhancement will be lost.
For eg:in development client for CJE1/CJE2 report the program name will be "GPAVPSATWFP4NN0YRDBIQBHI8MQ"
but when we transport it to other client new program "GP8O1UCNZTJYY5LTO8GN0UW2GQB" is generated in which implicit enhancements are not found.
Can you please suggest how to handle implicit enhancement in such cases? Or what is the correct way to transport it.
Thanks in advance
Greeshma.

Hi,
Thanks for the quick reply..
I have already done implicit enhancement as you said ,my problem is to transport it to another client.
I have implemented implicit enhancement for one report lets say it as "ABC", and i transport it to another client with all the enhancement. But in another client new program "XYZ" is getting generated for same report( dynamic programs ), so my implicit enhancement is present but its applicable to "ABC" program but not for "XYZ".
Can you please suggest how can i handle this??
thanks in advance,
Greeshma.
Edited by: Accgreeshma on Jan 23, 2012 3:04 PM

Similar Messages

  • Implicit enhancement for report painter reports(For GRR3 and CJE3)

    Hi,
    We have a client requirement to add 5 fields (In selection screen) to report painter reports ( Reports of CJE3 and GRR3 ).We created Z reports as a copy of standard reports, added required 5 fields by implementing SAP notes and other settings.We have also done implicit enhancement for all these reports to make change in the behaviour of new fields.This is working fine in the development client but the problem is once we transport this to other client new reports get generated( With new name ) and implicit enhancement will be lost.
    For eg:in development client for CJE1/CJE2 report the program name will be "GPAVPSATWFP4NN0YRDBIQBHI8MQ"
    but when we transport it to other client new program "GP8O1UCNZTJYY5LTO8GN0UW2GQB" is generated in which implicit enhancements are not found.
    Can you please suggest how to handle implicit enhancement in such cases? Or what is the correct way to transport it.
    Thanks in advance
    Regards,
    Shekhar

    Hi,
    Thanks for the quick reply..
    I have already done implicit enhancement as you said ,my problem is to transport it to another client.
    I have implemented implicit enhancement for one report lets say it as "ABC", and i transport it to another client with all the enhancement. But in another client new program "XYZ" is getting generated for same report( dynamic programs ), so my implicit enhancement is present but its applicable to "ABC" program but not for "XYZ".
    Can you please suggest how can i handle this??
    thanks in advance,
    Greeshma.
    Edited by: Accgreeshma on Jan 23, 2012 3:04 PM

  • Report Painter versus ABAP Report

    Hi everyone:
    Can someone tell me what are pros and cons of developing OR Running reports in Report Painter?
    Secondly can someone tell me when should one develop reports in ABAP and when should one develop reports in Report Painter?
    Thanks in advance
    R

    Almost the entire SAP R3 System is written in ABAP u2013 including the Report Painter.
    The Report Painter is a tool for the end user to create evaluation reports without having to involve the IT Department. He therefore has the information he requires within the limitations of the Report Painter very quickly.  No programming involved.
    An ABAP Report has to be written by a programmer/developer. It takes much longer, has to be tested, and, when everything is okay, be transported into the production system. This is time consuming and expensive. The report may have to modified at a later date u2013 again by a programmer/developer, which in turn also costs more time and money.  A report created using the Report Painter can be modified or created immediately by the end user, i.e. low costs, immediate results.
    I hope this clarifies the matter.

  • REPORT PAINTER DRILL DOWN REPORT

    Hi,
    i need to develop report painter report with drill down for cost elments and month wise
    out should be cost elements and all months
    Please suggest how to use drill down
    Thanks and Regards
      RAVi

    Along these same lines. I have a user that cannot drill down into a drill down report. Let me clarify. This  report does have drill down capability as some people can drill down into it but others cannot. If a user has authorization to run a report via GRR3. When they click on an item to drill down they do not get an authorization error statement, all they get is a statment that says "list contains no data". Any ideas why some can drill down and some can't? Thanks
    Mark

  • Report Painter - Income Statement Report

    Hi SAP Experts,
    I'm trying to enhance an existing Income Statement Report (table GLPCT) by adding the PLAN (table GLPCP) columns. Right now, PLAN columns has no data when I execute it.
    Report Layout:
    Profit & Loss   ACT-2007 ACT-2006  PLAN-2007 PLAN-2006
    Here is my current settings.
    Gen Data Selection: Company Code - 8A-BKRS
                                   Co Area - 0002
    Actual Column: <b>Basic Key Figure</b> - BHSL-I
                           <b>Ledger:</b> 8A
                           <b>Record Type</b>: 0 (zero)
                           <b>Fiscal Year</b>: 8A-YEAR (Formula-GLPCT-RYEAR)
                           <b>Posting Period</b>: 8A-PER (Formula-GLPCT-RPMAX)
                           <b>Version</b>: 0 (zero)
    Plan Column: <b>Basic Key Figure</b> - BHSL-P
                         <b>Ledger:</b> 8A
                         <b>Record Type</b>: 1 and 3
                         <b>Fiscal Year</b>: 8A-YEAR (Formula-GLPCT-RYEAR)
                         <b>Period</b>: BD-PER (Formula-GLPCP-RPMAX)
                         <b>Version</b>: 8AVERS1 (Value-GLPCT-RVERS)
    My objective is to include PLAN figures againts ACTUAL.
    Please give me ideas on how to solve it.  
    Thank you in advance.
    BD
    Message was edited by:
            Artemio Datu
    null

    Hi
    Report Writer functions can be accessed from within the Report Painter.
    The difference lies in the GUI of the report painter.
    For Report Painter
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
    For Report Writer
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/content.htm
    Refer the following links :
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-other/accessing-tables-using-report-painterwriter-98766
    http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_bw31/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Report Painter - Transfer of report data to Z-program

    Hello,
    I have created a report painter report for P&L / Balance Sheet.  I want to download the output, but in a specific format.   Is there any customizing option or a user exit or function module which can transfer the output value to a new z-program which can reformat and download the output in new format.  I tried report/report interface option.  But this does not work.
    I read SAP help documentation on SAP queries wherein it is possible to pass the query data to another external program for further processing.    Is it possible in Report painter / drilldown report ? 
    Regards
    Unit

    Hi Alexander,
    I have solved my problem. To send report to Solution Manager, you have to run few jobs in SDCCN of Satellite system. Procedure is as follows:
    Create Refresh Sessions Destinations job and set its destination as RFC back destination to solution Manager and run this job daily. By default, it will be periodically scheduled to weekly. Change its schedule in Tcode SM37.
    Upon Completion of above job, create Refresh Sessions job and run it manually.
    Upon Completion of above job, create Maintenance Package job and run it manually.
    In all of the above jobs, you will find set or have to set destination as RFC back destination to Solution Manager.
    Hope this will solve your problem.
    In case of any problem please revert back.
    Thanks and Regards,
    Naresh.
    Message was edited by:
            naresh dodeja

  • Report Painter Help - FI Reports

    Hi Gurus,
    I need to prepare a report via report painter for consolidating 5 company code which is using one chart of account. The client need a trial balance of all these company codes in one report (first colum show the GL account, then Description and the next 5 comumns for company codes 1 to 5). Will it possible to prepare report like this. if yes ,please can you guide me which table i need to use for this.
    I have tried to prepare using FSI1 report and related forms,but this wont allow more than one company code columns. Please can you give help on this.
    Thanks in Advance
    Regards
    Hari
    Edited by: HARI on Feb 20, 2011 6:53 AM

    Hi Christian ,
    Thanks for the earlier answer. Again i have some questions.
    I have successfully created FGI0 reports with 4 company codes and getting the reports based on the FSV. here i am facing the anothre issue for getting a consolidated reports of all the company code in the next colum
    Eg :
    I am looking for a report like this
           FSV Items                      
       C.Code 1 ,C.Code 2  ,    C.Code 3,C.Code 4  ,   Total of all 4 company code      
      Assets             ,          100   ,           100    ,        100  ,        100    (total)     400
    Also how we can eliminate the following :
    1)    Intercompany eliminations (eliminations for Acct Receivable/Payable)
    2)    Elimination of Intercompany Profit & Loss
    3)    Segment wise (total 7 Segments and mapped in new GL ) with company code wise consolidation by considering the eliminations
    Please advice.
    Thanks in Advance
    Regards
    Hari

  • Convert a report painter in a report writer

    Hi.
    How can we convert a «report painter report» into a «report writer report»?
    Thanks,
    Julien

    Hi Julien,
    Can you elaborate your question? and what is the requirement and what is the scenario ?
    Because Report Painter reports are created using Report Writers so i just want to know your exact requirement.
    Regards
    Ajoy

  • Report Painter including Drilldown reports

    Hi Friends,
                 what is the meaning of drilldown report

    Hi Sunita,
         Drill Down report is nothing but, from the main report, if u double click on some lines, u will be navigated to some other reports.
    For Ex.,
        For Pricing Std reports, go to T-Code V/LD  and u can get some std report and if u click on the o/p, it will be navigated to some other screen and u can get specific report from there.
    Regards,

  • Report painter libaries and report group

    Hi,
    I would like to seek advice on the relationship of libaries and report group.
    1
    in GRR2 navigation, i can see libary and report but i do not see report group in the navigation structure. So I would like to know what is the purpose of report group?
    2
    From the help it says "A report group is a group of reports and parallel reports from the same library which need to be processed together in one run."
    So my question is, since the report already grouped in a single library, why still need to defined report group?
    3
    Normally we just run by report that we interested in. So what does it mean "A report group is a group of reports and parallel reports from the same library which need to be processed together in one run".
    4
    Possible to have different report group in a library?
    Example library ZA1 has 2 report group ZG1 and ZG2. If can, what is the implication to have more than 1 report group.
    Thanks
    help.sap.com

    hi
    report group is used to identify the reports belongs to which functional part.
    example
    FI Standard Report
    CO Standard Report  etc..,

  • For Creation of Report Painter

    Hi
    I want to create a report using report painter. The report is a FI report. Which library should I use for creating the report?
    Regards
    V.Krishnan

    Hi Krishnan,
               Library is depends on Versions if u r using version 4.7EE you can use 4LC for developing FI Reports...
    regards....
    Pranav

  • Report painter issue regarding break up of gl accounts for rows

    Hi
    I am facing a problem while designing report for balance sheet in report painter. while selecting report format option in formatting option in menu bar system is displaying even zero value rows also. but the problem is for rows which have n number of accounts , it is not showing break up. it is displaying in a single row as a range and its total .
    If i go for " print row option" in formatiing in menu bar, then system is not displaying rows with zero balance in accounts . but i am able to get break up over there.
    I need both 0 balance rows to be displayed in output as well i need breakup for remaining rows also.
    plz suggets me .
    Regards
    Vijay

    Hi vijay kumar,
    You need to explode the charactor of Account Number for the item you want to "show break up".
    In tc: GR32, double click the item you want to "show break up", system popups the screen for changing charactors values, scroll the horizontal scroll bar to right, you will see the column Explode, change the default value "No explode" to "Explode" for the charactor Account Number and save the report. Then you will see the accounts when you run the report again.

  • Report Painter for PS

    Hi Exports.
        I'm trying to make a report for PS with Report painter.
        The report layout requests :
        Row : activity types.  set to exploded.
        Column :  activity types' quantity,  activity types' cost
        The purpose of this report is to see how many activities are spend by a project.
        I copy a new library from 6P3
        and set the OBJNR as selection date.
       The report runs normally but the result is not correct.
        The activity types's item lines can't be displayed,but a sum line.
        I do set the row setting to exploded....
       Is it really possible to see a project cost per activity type by report painter?
       or i made some mistake...
    Best Regards

    Hi,
    Refer the below link for Report painter. Hope this may help you.
    http://wiki.sdn.sap.com/wiki/display/ERPFI/Report+Painter
    Regards,

  • Report painter object name change during transport

    We have a requirement to add 5 fields (In selection screen) to report painter reports ( Reports of CJE3 and GRR3 ).We created Z reports as a copy of standard reports, added required 5 fields by implementing SAP notes and other settings .We have also done implicit enhancements for all these reports to make change in the behavior of new fields .This is working fine in the development client but the problem is once we transport this to Quality system new reports get generated( With new name ) and implicit enhancement will be lost.
    For E.g.:
    In development client for CJE1/CJE2 report the program name will be "GPAVPSATWFP4NN0YRDBIQBHI8MQ"  (In this program we have done implicit enhancement )
    but when we transport it to other client new program "GP8O1UCNZTJYY5LTO8GN0UW2GQB" is generated in which implicit enhancements are not found.
    Rgds
    Sameer

    Hi,
    have you looked at export/ inport functionality (gr57/ gr58) or what mode of transport are you using?
    Regards
    Hein

  • Need help in Report Painter

    Can anybody help me in Report Painter? I need a link.
    Regards,
    Subhasish

    Please go through the enclosed document. This will give you step-by-step approach for Report painter:
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    Check url
    http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
    Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
    Just go through These Links to learn about report Painter.
    http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    I have a standard report and it uses a structure to pull the data for the report. I need to create a custom report which uses the same structure, selection screen but a different layout. Could any of u plz advice, if its doable in report painter or just plain abap program?? Also I am interested to know how the report painter stores the actual report?? as ABAP program?? Please help..urgent..
    check the SAP help ..
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
    I had made couple of SD reports in report painter 4 year ago .. as far as process is concern you have create library , but it deals with information structure which start with s0* , after defining information structure in library it take to select the fields and display them on your out put . information structure have the statistical data most of the time . As i worked on information structure , so31,32,33 .....
    I t creates ABAP program like ABAP query creates in background . if you execute Customer Over due analysis or in Co02 cost analysis report or MC* ( MM stock reports ) those are in report painter .
    Hope this'll give you some guide line ...
    As far as I know about report painter, It create a report in background..Like when you make ABAP query (SQ01, 02, 03 ) .. It will create a report. You cant modify the report . You have to get OSS id in order to do that. if you're ready do it then you can pass it to Memory and can achieve your goal ...
    I think it will give you some hint. I wish I could have authorization to use report painter on my this project so I can help you out practically.
    Please see these steps , it`ll help you ...
    http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp
    The variation objects are coming from the sets.
    For example, when you read the report 'Cost Centers: Actual/Plan/Variance'(T-code : S_ALR_87013611), you can find the characteristic 'Cost Center' is set as a 'set variable'. So the cost center in the report left side are coming from the cost center group that you input.
    Does any know if we could use Report Painter across two controlling areas? Any documentation available will be great. Yes. When setting up a report in CCA you can have multiple controlling areas. In the General data selection you will have the option for the CA as a selection.
    You can also use standard references objects to construct your own reports: libraries, standard layouts, default columns, and row and column models, all in the standard R/3 System, are available for custom reports.
    Report Painter report definition requires several Preparatory Steps, depending on the complexity of the report to be generated.
    1) Create a library and pick your reporting tables.
    2) Create your report
    3) define your set up within the report
    a)General data selections
    b)Colimns
    c) rows
    d) formulas
    Standard layouts are maintained in the IMG "Financial Accounting" under "Special Ledger -> Information System -> Maintain standard layout.
    Create libraries, which means assigning the
    characteristics
    key figures
    Predefined columns
    For each of these categories you need to select the objects to be used in reports of the specific library. You define the sequence of the objects in the selection lists of the Report Painter in field "Position". Frequently used objects should be at the top of the list.
    go to
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22ba743c611d182b30000e829fbfe/frameset.htm
    I have created a report through report writer/Painter(GR51). My query here is to link this report to a transaction code. Could you please suggest me how can I acheive this?
    Go to SE93 and select the Transaction with Parameters ( Parameter Transaction)
    Then in the Transaction field give: START_REPORT
    Skip initial screen
    Screen 0
    In the default value for the parameters give
    D_SREPOVARI-REPORTTYPE RW
    D_SREPOVARI-REPORT ( Give your Report Group )
    If you have any doubt pick any report painter tcode and check in SE93
    Follow below steps
    1) Execute report through report painter
    2) From system status get the program name
    3 ) go to se93 and select report transaction and assign
    program name .
    Is it possible to make bigger the text a I have on a text field?, Im using the screen painter and I need to put the title bigger (as a requirment).
    You can define your text as any length.If you are talking about the font,i am afraid you cannot do that.
    No, you can not change the size(font) of the text on the dynpro, you can hightlight it, which changes the color to "blue" to make it stand out. You can change this on the attributes tab when double-clicking on the element in screen painter.
    what is the sentence that open a screen painter file
    Don´t really understand what you mean with "open a screen painter file".
    If you are speaking about showing a form generated with the screen painter,
    Dim oXMLDoc As New MSXML2.DOMDocument
    oXMLDoc.load("Form.xml")
    SBO_Application.LoadBatchActions(oXMLDoc.xml)
    Dim oForm As SAPbouiCOM.Form
    oForm = SBO_Application.Forms.Item("YourFormID")
    oForm.Visible = True
    regards
    vinod

Maybe you are looking for

  • From Windows user: Leopard

    Hi all. I'm a typical Windows user, never had any Macs in my life. And my English is not perfect, sorry Being impressed by new iMac and all that hype around Leopard and having constant pressure from my kids and wife, I bought a brand new iMac 20", wi

  • Zoom:Use Scroll wheel with Modifier Keys to Zoom

    Help! Since the 10.6 update from 10.4.11, I can no longer zoom in and out by holding Command while moving scroll ring on my Kensington Expert Mouse. I have tried other modifier keys to no avail. I suspect a conflict, but do not know where to fix it.

  • CD Text not showing up on burned cd's.

    When I burn a cd, the cd text is not showing up even though I have the include dc text option checked. Any suggestions?

  • Name of  the Table  which contains Debit Credit Fields

    Hii all, I have to calculate the net amt of sales performed by all sales offices of my company. i have to take Debit n credit field. Which table should  I refer to get these  fields ? Regards Shubhra Tiwari Edited by: shubhra tiwari on Feb 18, 2008 7

  • Reboot my macbook pro 2010.

    Hi, my macbook pro is restarting all the time and the error message below. had no problem when installing the MAC OS mavericks. I installed windows but it gave the same problem. can someone tell me what's wrong? that will have to replace the logic bo