Import 16 bit tiff files in premiere pro cs5 ?

When i try to import a 16 bit tiff sequence I get an error message "The video bit depth of this file is unsupported.".
I could not find how to set bit depth in project, however I understand from the help files that 16 bit workflow is supported.
What I am doing wrong?

Hi again Salazaroo....
Thanx for your answer...
I am working in a project shot with RedOne and the output will be 35mm and DCP.... we´ll made the prints with Cinevator system as well... same as yours...
What I did is open the Pr project in After effects and from there export the R3d as DPX to work in the compositings... I am trying different ways to do this... change the R3D settings to RedLog and RedSpace before to export as DPX OverRange, or PDLog985 and RedSpace before to export as DPX Standard (as Mark Christiansen says in THIS SITE) ...
Once I do it, I import the DPX to start the composition... so I change the Cineon Settings to OverRange or Standard (depending of the settings at export) and apply the Cineon Converter LogToLin... but then everything looks too overbright to work... I am working with the DPX and .psd and tiffs together so it is like crazy to match everything together... 
I tried to export as PDLog985, RedSpace and OverRange Cineon Settings (instead of Standard) and it looks much better... I check the picture looking at the Info panel and everything is Ok, or close the 'Iris simulator'  and detail appear in the image, ...but when I check different elements coming from matte painters and 3d artist, whites clip at 1... how can i match everything together in the same space color to work and then apply the Cineon Converter LintoLog before export???
This is the first time I work with DPX and I am reading a lot about it, but I could´t find a step by step explanation... and it is like there are many ways to deal with it... some people says to use a general Working Space, some people says don´t (See this Article) ...
Thank you man.... I really appreciate your help....

Similar Messages

  • How can I import MP3 audio files into premiere pro cs5?

    Can any one help?
    How can I import MP3 audio files into premiere pro cs5?

    It is really difficulty for me.If you still haven't found a satisfactory answer,please search it on google.Hope you can get your answer as soon as quickly!
    fifa 14 coins
    cheap fifa coins

  • CANNOT IMPORT FCP  .XML FILE INTO PREMIERE PRO CS5

    Hi,
    Camera used:-Sony Pmw Ex3
    Footage       :- XDCAM  sp(1440 * 1080i) PAL
    Edited in      :-final cut pro 7
    Error            :- failed  to import .xml file into premiere pro cs5
    I tried  to import the .xml file into premiere CS5 ,it asked for the media files  to relink .whn i linked the .mp4 files it showed the  error messege "The  selected file cannot be linked becouse it has 2 audio channel(s) and  the clip was created with 1 audio channel(s).
    then i tried to relink the .mov instead of .mp4 file (which i  used in final cut pro on apple machine)i got  the error "Codec missing  or unavailable"
    what should i do???..i almost done all the  editing in final cut pro and i bought the adobe coz i thought i can  finish all the pending FCP projects in Premier Pro..??

    What is the CODEC in your MOV file(s)? MOV is but a "wrapper," like AVI. This ARTICLE will give you some background. It could be that you just need the proper CODEC, or it could be that it is a Mac-only CODEC, and then you will need for the producer to Export in another CODEC, that is PC-compatible.
    This ARTICLE will give you some background on CODEC's, in general.
    Good luck,
    Hunt

  • Importing .mts AVCHD files into Premiere Pro CS5.5: can it be done?

    Is it possible to import .mts files from a memory card into Premiere Pro? Whenever I try to, I get a message that reads "Codec not supported".
    My camera is a Sony Alpha A55, and this worked perfectly well in Final Cut Pro X.

    I am not using the Sony Alpha A55 which might use a different codec than my other Sony's (CX-550V and HX5V) BUT I am using PP on an iMac. For different reasons (one of which being that I already used this approach with FCE), I am converting my raw mts files into mov files using ClipWrap ($50, very fast, they have a trial version for download). This has many advantages:
    - the footage is UNTOUCHED. It is just put into a different container.
    - the mov files are WATCHABLE in the Finder (and everywhere else, including PP).
    - the mts files can be dragged and dropped (without bothering about the folder structure) directly into ClipWrap (or first on your HD if you want).
    This being said, my experience is that even those files are too much for my (I thought) powerful iMac to scrub through once basic editing has started. So I resorted to transcoding to proxy mpeg2 intermediate files (so that I don't fill up my HD too quickly) and only before exporting my sequence, replace the proxy footage by the original (well converted) mov files. I am still working out the ideal workflow...
    Try the ClipWrap demo to see if the codec is supported. If not, they are a very responsive company and will most likely update their software rapidly (for free).
    HTH.
    PS: I paid for my software, so I am just a satisfied customer reporting on the product.

  • Maximum File Size of .dv Import File to Premiere Pro CS5?

    Hello Community:
    I searched this forum and Google in general, but could not find an absolute limit on the media file size I can import into a Premiere Pro CS5 project.  I'm scheduled to process the ".DV" recording from a conference, which could go on for hours.  I have asked the camera man to break up the recording in one-hour segments, but I'm getting some push-back.
    Is there a specific size limitation on importing an NTFS file structure .dv file in Premiere Pro CS5?
    Thanks,
    Rich Locus

    Same issue. I previously used  NeoScene to convert .mov files from a Canon 5d mark ii to the easier to edit with Gopro Cineform .avi format in Premiere Pro CC. They used to work fine but now Premiere only recognizes a very small part of the file. The first 18 seconds of an 8 minute file.
    I tried importing the file to a new clean scene and the problem remained.
    I need to be able to work with this footage. Somehow Premiere is no longer able to properly read clips it used to be able to read.
    I would like to hear something from Adobe on this issue.
    EDIT: I just updated my GoPro software to 2.0 and the problem was instantly solved. The same might apply to TechSmith.
    EDIT 2: Upon rendering the edit I discovered that while the entire length of the clip was represented it in fact stopped playing new frames at the same frame as it had before. So no luck. Updating GoPro Cineform made the length of the file display correctly (7min) but did not actually let me play the file beyond the first 18 seconds - it just showed the same frame.
    I deleted all preview files and cleaned Media Cache files (under media/preferences) - this didn't help.
    Finally I made the file offline, closed Premiere, changed the file name and re-opened Premiere. Then I right clicked over the file in the Project window and chose replace file to re-connect. The file finally came in correctly. I've now rendered it and it runs through the entire 7 min.
    Message was edited by: ereitz

  • Importing mov files in premiere pro cs5

    I just installed Adobe Creative Suite 5 Master Collection on my machine and now, i have two issues.
    1. I do have the latest quicktime installed but when i try to import *.mov files with audio, only the audio is imported and works fine. the video isn't, but I dont get a dialogue error box.
         A). if the *.mov file has only video, i get a file import failure message saying " the file has no audio or video streams".
    2. the next prob is my dymanic linking does not work.
    Help please

    Im trying something and I hope you can help me. I have two computers, one dedicated to capturing a event and the other I have is dedicated to playback. They share the hard drive via a network. What I want to know is- is there a way for the dedicated playback machine to access a video file that is still being captured by the capturing machine and play back parts of it in a sequence??
    Gosford Lawrence
    !https://www3.oovoo.com/oovoocallme/images/btn1.png|height=68|alt=http://webvideocall.oovo o.com/callme/gosford/236|width=123|src=https://www3.oovoo.com/oovoocallme/images/btn1.png| border=0!
    Date: Thu, 21 Apr 2011 17:40:14 -0600
    From: [email protected]
    To: [email protected]
    Subject: importing mov files in premiere pro cs5
    Zone Alarm, eh? I used to use that program, but it got in the way of almost everything that I did, that I canned it completely.
    Glad that removing ZA solved your issue.
    Personally, I find MOV Animation CODEC to be quite good, and use that for a lot of work. Jeff Bellune, here, like the Photo JPEG format, but I have not explored that.
    Good luck,
    Hunt
    >

  • Encoder Options For *.wmv Files re Premiere Pro CS5.5

    Hi,
    I have a collection of *.wmv files that Premiere Pro CS5.5 refuses to open and it always generates an error message so I need to re-encode these *.wmv files into a format that Premiere Pro will import OK. I know that Premiere Pro will open *.wmv files so I think that the ones I have must have some data structures slightly out of normal. The files actually play with VLC and open with Sony Vegas so they are not corrupt.
    What I hope to do is to use an encoder that will re-encode the files without any loss of video quality into another format or even into a slightly renamed *.wmv file in the hope that the re-encoded version of the *.wmv file will then be palatable to Premiere Pro.
    Would anyone please be able to recommend an encoder that is suitable for my needs? On a final point, as a total novice with video, what aspects on re-encoding would cause loss of video quality or is there no loss of quality when re-encoding? Apologies for such a dumb question but I really am a newbie to all this.
    Rgds

    If you can get the files open with Vegas, you could probably export them using Lagarith Lossless Video Codec or Ut Video Codec Suite, both of which are lossless AVI codecs that work nicely with Premiere Pro. PPro needs the 64-bit version, but I don't know enough about Vegas to know if you need 32-bit or 64-bit, so just install both. Note that the files will be much larger, but will not suffer any perceptible quality hit.
    I'm not sure of any way to do a WMV rewrap--I'll see what I can find.

  • How do I import an MKV file into Premiere Pro CS6?

    How do I import an MKV file into Premiere Pro CS6?

    Premiere Pro CS6 doesn't support MKV formats. To import MKV to Premiere Pro CS6, a recommended solution is to convert MKV to AVI.
    I've been reading so many different forums on how to convert MKV to AVI. Finally, I summarised three solutions:
    First one: HandBrake . This tool is a free and open-source multi-threaded transcoding app. It supports nearly any videos including MKV format and has Mac version and Windows version.
    Cons:
    1. HandBrake is too professional to handle for most people;
    2. It doesn't support MOV as output format.
    Second one: there are many third party software which supports converting MKV to AVI. I just test one of them. It's professional yet easy to use and the service is excellent. And there is a step by step guide about how to use this tool .
    Cons:
    1. Most of them are not free.
    Third one: Online-Converter . This kind of converter does a great job on file conversion.
    Cons:
    1. Like most online converters, the free version of this tool only allows you to convert videos smaller than 100MB. It's too small for video conversion;
    2.Your MKV video should be upload to the internet to be converted. This means the risk of pravite information leak is possible.

  • I am unable to import a SWF file in Premiere Pro

    Please indicate how to import an SWF file into Premiere Pro. I tried to import as an movie, but it would not work.

    Hello,
    As of Adobe Premiere Pro 7.1, you cannot import FLV files directly into Adobe Premiere Pro. While working with FLV footage, use Adobe Media Encoder to import the FLV files and transcode the FLV files into a supported file type. For example, use the H.264 format.
    After Effects and Adobe Media Encoder still support the import of FLV files.
    FLV file export is still available within Adobe Premiere Pro.
    Peter Garaway
    Adobe
    Premiere Pro

  • Media Files in Premiere Pro CS5.5

    I have several large 60GB media video files I will be importing into the project section of Premiere Pro CS5.5   These files are stored on an external hard drive (will be using FW800) where I plan on working with these files from the external HD.   The question I have is, once I import them into the project section of Premiere Pro CS5.5 and start editing with various pieces of video from the project files, will the original media files residing on the external HD be changed or edited in anyway or will they remain the same?   It is my understanding that these files will remain unchanged and that CS5.5 will just use the data from the original files and then once the PP Project is exported, the data will just be copied from the original media and the original media files remain unchanged?  I would appreciate it if someone could confirm this to be ture.   Thank you!

    When working from external HDD's, here's a tip: make sure to set the drive letter for that external (on a PC) HDD in the computer's OS, so that it will ALWAYS be the same, everytime that it is plugged in, or turned on, regardless of the order.
    The links to those media files are absoute Paths, so if anything in the Path changes, the links will be broken.
    Good luck,
    Hunt

  • Importing .mts AVCHD video into Premiere Pro CS5.5, HELP!

    Hello,
    I am new on Adobe forums and I nedd a question answered.
    I have seen that there is no definite answer on how to import .mts files from my Canon Vixia HFR20 to Premiere Pro CS5.5.
    I get "The file has an unsupported compression type" message. For now I convert the videos to .AVI but i would why would I continuosly convert them?
    I bought the camera mainly for the HD, so help soon would be greatly appreciated!
    Thanks in Advance,
    Ethan
    P.S: I have a PC to put that in mind...

    Post a screen cap of what presets you have.
    Maybe you have gotten the revert to trial bug and lost your options to play these files since they dont play in the trial version.
    Here is what mine look like.
    Here is the Properties of the file you uploaded.
    And here is what sequence that was created when dragging to the New Item button.
    See if you have the same options.
    GLenn

  • How do I import mp4 video files into Premiere Pro Cs4

    For sometime now, I've been finding it practically impossible to import video files into premiere Pro cs4 especially mp4 files which happens to be the commonest to me now, as I currently shoot with a Nokia Lumia 920 phone with Windows phone 8 OS. I have tried severally to convert the videos into various other formats using Xilisoft video converter version 7.7.2 and each time I do this, they would either not play fine in cs4 or not import at all.
    Please what can I do to be able to import these mp4 files into Cs4 or what format or how do I convert them into a format that would play seamlessly for better editing?
    Funny enough, I had once imported video files that were shot with the same phone and they worked well, just wondering why they aren't now.
    Please any assistance would be appreciated.
    Thanks
    NKC

    I'm happy to announce to you all that my "mp4 importing" issues has been sorted out. Now I import mp4 shot with the same Windows Phone 8 Device into Adobe Premiere Pro CS4. Only that for the moment, it doesn't play as fast as with ordinary player.
    But how did I get it to work, you may wonder;
    I simply installed Itunes on the system, I also installed an app called media monkey. I can't say which of the apps did the magic but the next time I tried to import mp4 files into Premiere Pro after these installations, it imported seamlessly.
    Obviously there's a link between the required codecs and the itunes itself.
    You may want to try it and hope it works for you.
    Kindly inform us if it works.
    Thank you all.
    Cheers.

  • Audio problems when exporting files from Premiere Pro CS5

    I try to post in English.
    I have audio problems in Premiere Pro CS5 when exporting a film.
    I cut an interview. The sound seems not to be synchronized when exporting a file. It doesn´t matter what file format I export. On cutting points the sound is different to the sound I hear in premiere. In premiere the audio sounds very good but in exported file I hear cracks on cutting points.
    When I reimport the audio file an put it in the timeline the synch point is correct but the interview differs about 2 frames to the original audio in premiere.
    The material was filmed on Sony ex3. The files are XDCam HD. I have updated the production suite.
    Thanks for answers
    Frieder

    Also, make sure that you check the box marked "Export Audio" if you want a MP4 extension.

  • Importing MTS files into Premiere Pro cs5

    I have been reading though some threads recently and now it has me wondering what I am missing on this subject. I have been working with MTS files for quite a while and have been dragging the folder into my project and rendering from there. (iMac 2012 with retina display)
    Does this method affect the quality of these files? Is it better to convert them from a converter program and then import them? Also I have not been able to use any of the clips unless I keep them attached to the whole. Noticing this is not the case for my friend who uses .mov. Is there a way around that, that I am not aware of.
    Coming from  SD digital tape based camera to the Canon XA10 using ACVHD cards the quality already looks better to me, but if there is a chance it can look even better than I want to try that method out.
    Thanks for any help/ideas I can get.
    ruez

    Some notes about using video from SD card based cameras (or hard drive cameras)
    Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
    -and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html
    -http://helpx.adobe.com/premiere-pro/using/importing-assets-tapeless-formats.html

  • Issue with importing H.264 files into Premiere Pro CS6

    I have some AVI files that will not import into Premiere Pro CS6 (not trial version). The Gspot utility says they are H.264/MPEG-4 AVC format and that the codec is installed. I can see and play the files in Bridge but when I try to import it says “Unsupported format or damaged file”. I tried importing in CS5.5 and the file imported, however only the audio plays. Why is this happening and how can I import these files?

    Premiere does not support H.264 in an avi.
    You need to convert first.
    See post 3: Can't get PPro to accept video file.

Maybe you are looking for