'import (8) ended with errors' i got this error

Hi experts,
while transporting request no from devlopment to production the following error is displayed in SE09 TCODE.
IMPORT (8) ENDED WITH ERRORS. More details of this error message is
transport request : glpk901850
system :glp
tp path : tp
version and release :372.04.29 700
main import
ended with return code => 8.
how to solve this error.
pls help me in this

duplicate post locked.
Thomas

Similar Messages

Automatic imports throwing "tp ended with error code 0204"

Hello frnds !
In one of my non prod system, where automatic transport is enabled for 4 clients, we are getting tp error with 0204 error code in job jog of TMS_000000000*TMS_TP_IMPORT with report TMS_BCI_START_SERVICE.
Can you plz suggest someting ..
Release :
SAP_BASIS : 700 : SAPKB70013 : SAP Basis Component
Job log:
Job log overview for job: TMS_0000000005TMS_TP_IMPORT / 18003700
Job started
Step 001 started (program TMS_BCI_START_SERVICE, variant , user ID **)
Transport control program tp ended with error code 0204
Transport control program tp ended with error code 0204
Job finished
STMS errors :
System E40 Command Start TMS_TP_IMPORT
Client 000 Service Transport Service
User HP Start Hintergrund
Date 24.06.2009 Function TMS_TP_IMPORT
Time 18:00:58 Message TP_REPORTED_ERROR
Transport control program tp ended with error c
Errors: parameter is missing
System E40 Command Start TMS_TP_IMPORT
Client 000 Service Transport Service
User HP Start Hintergrund
Date 24.06.2009 Function TMS_TP_IMPORT
Time 18:00:58 Message TP_REPORTED_ERROR
************************************************************************************************************************Transport control program tp ended with error c
Errors: parameter is missing
This is tp version 372.04.40 (release 700)
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBSWPATH is no longer used.
/usr/sap/trans_P40/tmp/SLOG0926.E40.LOC is already in use (1), I'm waiting 2 sec (20090624180056). My name: pid 18030 on er3asu72
(e40adm)
HALT 20090624180058
ERROR: Empty client(s) found in buffer E40. These entries cannot be filled implicitely.
Either use one of the options 'CLIENT' or 'DEFAULTCLIENT' or#use the command 'FILLCLIENT' to fill these entries with a valid client.
ERROR: EXIT(16) -> process ID is: 18030
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0204
standard output from tp and from tools called by tp:
************************************************************************************************************************Thanks
Ashish

Hi Vikas,
Could you please check the SLOG file and see what you observe
/usr/sap/trans_P40/tmp/SLOG0926.E40.LOC is already in use (1), I'm waiting 2 sec (20090624180056).
Please check the following Note 12746 - WARN <file> is already in use (), I'm waiting 5 sec.
Mostly you have to perform the following step mentioned in Note
"If there is only one tp process that writes the SLOG messages, stop this process and copy the generated file in tmp to the existing file in log on UNIX, for example, using cat /usr/sap/put/tmp/P<date>.<SID> >> /usr/sap/put/log/P<date>.<SID>Afterwards, you can delete the file in tmp and repeat the phase."
Before trying above you can also stop all tp process and then start the transport job again.
Thank You,
Praveen

Transport control program tp ended with error code 0212

Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
 service: transport service
 start : online
 Function: TMS_TP_SHOW_BUFFER
 message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?

dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t : Test. All database changes are rolled back.
-t4 : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory

Transport control program tp ended with error code 0211

Dear Experts,
I have a problem in doing the import after the client export was successfully done.
I am actaully tring to do a client import/export from the PRD server to DEV server.
On PRD the client is 900 and on the DEV the client is 240.
I have manually copied the transport requests created into the
/usr/sap/trans/cofiles and /usr/sap/trans/data folders to the same on the DEV server.
After coping them,
I have tried to add these transport requests to the DEV server queue, i get the following error message
Transport control program tp ended with error code 0211
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: ADDTOBUFFER RT2KT00014 RT1 pf=/usr/sap/trans/bin/T
Return code: 0211
Error text: no info about transport request found
Request: RT2KT00014
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
After this I have tried to add the transports to the buffer at the OS level using the command
./tp pf=TPPARAM addtobuffer "RT2KT00014" RT1 U18 by going to the folder
/usr/sap/trans/bin
But it says that the tp is not found.
I have also checked the permissions for the TRANS folder, it has full access i.e 777
This is where i am struck, and the client has to be imported asap as the requirement for the SUPPORT TEAM is very urgent.
We are on AIX, Oracle 10G and ECC6
Thanks and regards
Harry

Dear Imtiaz,
Thanks for your quick fire reply...
The link helped me but it could not resolve my issue..
Infact i found it my self that the transport requests had to be given full FILE PERMISSIONS at the OS level
I logged in as ROOT
and changed directory to /usr/sap/trans/cofile and gave the command
chmod 777 RT00014.RT2 and
chmod 777 RX00014.RT2
and then went to STMS>SYSTEMS>Import View>Extras>Other requests--> Add ..
Here i added the request nos and then it added up in the queue and then i started the import.
Anyway thank you very for your reply..
Awareded points to you.
Thanks and regards
Harry...

Transport control program tp ended with error code 0247

Hi,
Our landscape is such that any transport request once released, gets imported to Q system immediately. However there is another system (another box REG - regression testing) to which I would like to import a request but the transport queue of REG system does not show the request. So I tried to explicitly add it to the queue but I get the following error message, 'Transport control program tp ended with error code 0247.
There doesn't seem to be a problem with data & CO files as the same request is in Q system and the changes are all transported successfully.
This request is a transport of copy that contains some ABAP code. (changes to the relevant package can be saved only in local requests therefore transport of copy is recommended to transport the changes).
The changes appear correctly in Q system but for REG system the request neither appears in the queue nor be added to it.
Can someone advise where the problem is.
Cheers,
KC

Hi
When the REG system is not in the system landscape, probably you may not have Data & Co files in that system & you need to have those files separately in the REG system path & then import it.
Do consult Basis team on this issue.
Thanks,
Murali.

STMS: Transport control program tp ended with error code 0232

Dear ERP Gurus,
I just encountered problem with STMS in my PRD system. The import is just stuck up on "tp connecting to database". It won't continue unitl the system gives me this error message:
Transport control program tp ended with error code 0232
Errors: connect failed
The tp System log says:
ERROR: Connect to PRD failed (20090227135454, probably wrong environment)
I have verified that the suggestion in SAP Note 165708 has already been implemented in our DEV, QAS, and PRD instances.
Any idea why I am having this problem? Imports were running fine yesterday. Please help.
Your prompt response is highly appreciated.
Thanks a lot.
Best Regards,
Albert

Hi Albert,
First check import monitor and delete all requests from queue, which are still getting imported.
And go to /usr/sap/trans/tmp and mv all those tmp files to other location.
Then kill all OS jobs which are getting execute with tp.
Check all jobs are runnig fine, related to transportation. If not reschedule the same.
Then start importing.
Before doing this just check whether your stms related RFCs are working fine.
I think One of your RFC is getting struck. just try to change ip or hostname accordingly and try.
Regards
Nick Loy

Transport control program tp ended with error code 0232

Dear all
I've change password for user SAPSR3 by mistake
the result from brtools is "password changed successfully in table OPS$CAPADM.SAPUSER for user SAPSR3"
after that i can not transport to my production client
with error : TP_REPORTED_ERROR
Transport control program tp ended with error code 0232
Can anybody help me please
thanks & rgds,
Della

I've changed my SAPSR3 password to sap but still error
this is the error log from Check Transport Tool
DB Connect            Link to database failed
This is tp version 372.04.70 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
ERROR: Connect to CAP failed (20091217174435, probably wrong environmen
TRACE-INFO: 1: [dev trc     ,00000] Thu Dec 17 17:44:35 2009
0.007435
TRACE-INFO: 2: [dev trc     ,00000] DlLoadLib() success: dlopen("/usr
0.007448
TRACE-INFO: 3: [dev trc     ,00000] Got
LIBPATH=/usr/sap/CAP/DVEBMGS32/exe:/usr/sap/CAP/DVEBMGS32/exe:/usr/lib
lient from environment
TRACE-INFO: 4:
0.008053
TRACE-INFO: 5: [dev trc     ,00000] Oracle Client Version: '10.2.0.2.
0.008140
TRACE-INFO: 6: [dev trc     ,00000]    >oci_initialize(con_hdl=0, char
0.008158
TRACE-INFO: 7: [dev trc     ,00000] application info callback registe
0.008173
TRACE-INFO: 8: [dev trc     ,00000] OCIEnvCreate(mode=16384=OCI_UTF16
0.010330
TRACE-INFO: 9: [dev trc     ,00000] Client character set UTF16 -> UTF
0.010421
TRACE-INFO: 10: [dev trc     ,00000] Client NLS setting (OCINlsGetInf

Transport Controll Program tp ended with error code 0012

we have 3 instances 1 DEV 2 TEST 3 PROD.
in TCODE:STMS by clicking 'system overview' icon
all systems are showing and domain controller is PROD,
and Test System also defined as Transport Domain Cotroller.
earlier STMS scenario: Transport Route is from DEV to PROD system not to the TEST system.
what I have done:
deleted the Transpor Domain Controller of the TEST system and kept as test system.
create routes from DEV to TEST to PROD.
present STMS problem:
when I am sending Request from the DEV to TEST Request going smootly. but at TEST sytem while importing the Request it is giving the ERROR as "Transport control program tp ended with error code 0012"
please help out me....as soon as possible.

This is definitely the wrong forum for your post. Please repost properly.
Regards, Klaus

Transport control program tp ended with error code 0249

Hello guys,
I am facing an when importing transport. After I click import to the transport in STMS, before it runs, a message window is displayed immediately. This was working find until last week, any kind of transport is followed by the same error.
Transport control program tp ended with error code 0249
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT BWDK903312 BIW client200 U0 pf=
sapbiw1a\s
Return code: 0249
Error text: connect failed due to DbSL load lib failure
Has anyone faced this error while trying to import a transport? I have not found the same error in sdn (0249)
help will be appreciated.
thanks
DGF

Your are right, but which is the Basis forum?
Business Process Expert
Database & OS Platforms ABAP Development
Enterprise SOA Portal
Emerging Technologies
SAP Solutions
Business Intelligence
Scripting Languages
SAP Business One Industries
Community Discussions
SAP NetWeaver Application Server Integration and Certification Center (ICC)

Transport control program tp ended with error code 0203

when i import queue and transport queue from dev to prd ,error show:
Transport control program tp ended with error code 0203
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT DEVK900298 P01 clientP01 U0 pf=/usr/sap/tra
Return code: 0203
Error text: wrong syntax in tp call
Request: DEVK900298
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.

Dear Allen,
The transport control program tp collects all return codes that occur when a tp command is executed. From all of these single return codes, a combined return code is calculated that tp outputs as a result at the end the command. During an import, for example, all return codes for individual import steps are handled. If a special return code does not occur, then the combined return code at the end is the maximum of individual return codes that occur. In addition to the value of the return code, tp also gives a short description of this return code. You can display this short description using the command explainrc.
Normally, all return codes that occur originate from individual transport steps. Since these individual return codes can only have the following values 0, 4, 6, 8, 12, 13, 14, 16, the combined return code also has one of these values. However, if a general error occurs, a single return code over 200 is generated. For example, this could arise if tp cannot establish a connection to the database. The maximum return code for all single transport steps is output in a separate message before specifying the combined returned code. In this case, the combined return code is always the return code of the general error message.
tp Commands:
tp addtobuffer <request> <sapsid>
As of Release 4.6A, an explicit addtobuffer command leaves the position of the entry unchanged, if the relevant transport request is already in the buffer. Only the status of the entry is changed:
Unconditional modes appearing in the command line are added to the unconditional modes in the buffer.
All the steps of the entry are re-initialized.
If the entry found is not an initial entry, the import step for the command file is set to *4000 .
Before you call this command and its options, consider the effects of changing the import sequence.
tp cleanbuffer <sapsid>
This deletes successfully imported change requests from the list of requests that are marked for import into the SAP System <SAPSID>. This function is contained in the commands tp import all <sapsid> and tp put <sapsid> .
tp delfrombuffer <request> <sapsid>
If the specified request is marked for import into the specified SAP System, this flag is deleted from the import list.
Before you call this command, consider the effects of changing the import sequence.
As of Release 4.6A: If a transport request was only partially imported, you can delete this type of transport request from the buffer. However, if a deleted transport request is placed in the buffer (without having been initially or completely imported), the attributes of the old entry are reactivated. This means the return codes, the unconditional modes and tags of the deleted entry appear in the new entry.
tp delstopmark <sapsid>
If the list of requests marked for import into the specified SAP System contains a STOP mark, the mark is deleted.
tp export <request>
This exports the complete request from the source system. This command starts the export of a request from the operating system level. Only use this command in exceptional cases. The SAP System uses the command expwbo to release requests from CTS transactions.
tp reformatbuffer <sapsid> [options]
This automatically reformats the entire buffer.
As of Release 4.5A, there are 2 different formats for buffer entries. (As of Release 4.5A, tp can work with both formats, and with a puffer containing heterogeneous entries. As of Release 4.6A, tp can work with 3 formats.)
However, in certain cases entries with the old formatting have to be reformatted during the normal run of tp . In this case, the entire buffer is automatically reformatted.
If you use the options downtorelease and Iagree for command reformatbuffer , you can format the buffer so that its formatting is compatible with an older release:
Option downtorelease <Release>
The command reformatbuffer with this option formats the buffer so that the formatting corresponds to the one used in an old release. This is necessary if tp writes buffer entries to the buffer of another system, but uses a buffer format that the transport control programs does not understand in this system.
Since older formats cannot store the same amount of information as the newer ones, some information contained in the original buffer may not be stored in the unformatted buffer. This may lead to data loss.
To avoid data loss, the original buffer is stored. In addition, you have the following functions:
Displaying the unformatted buffer (using showbuffer <SID> )
Displaying the original buffer (using showbuffer buffer=<SID>SAV )
Accepting the unformatted buffer (using reformatbuffer and the option Iagree yes )
Resetting the changes (using reformatpuffer and the option Iagree no )
If you call reformatpuffer using downtorelease , tp displays in detail if information was lost by reformatting, and what that information was. tp also names the commands that is has to execute to accept or reject the changes.
If you use the option downtorelease , you must also specify the option Iagree with yes or no . You cannot use the transport system until you decide to accept or reject the changes.
Option Iagree
Here are the following values for this option:
yes ( true )
Accept the change made by tp reformatbuffer <SID> downtorelease <rel>
In this case, tp deleted the buffer semaphore file that was lifted for security reasons at the first call of reformatbuffer
no ( false )
Reject the change made by tp reformatbuffer <SID> downtorelease <rel> In this case, tp copies the backup of the original buffer back and deletes the buffer semaphore file that was lifted for security reasons at the first call of reformatbuffer
tp setstopmark <sapsid>
A special STOP mark is added to the list of requests registered for import into the specified SAP System. The commands tp import all <sapsid> and tp put <sapsid> only process the requests in front of this stop mark.
If there is no stop mark, it is automatically generated by the commands
tp import all <sapsid> and tp put <sapsid> .
When all the requests in front of the stop mark have been imported successfully, at the end of all the calls the related marks and the mark itself are deleted.
A STOP mark can only be placed at the end of the change requests that have already been marked. In addition, it can only be set if no other mark of the same kind already exists.
tp showparams <sapsid>
This tp function displays which values the individual parameters of the transport profile have for the current SAP System.
tp verse <request>
This creates versions of the objects in the specified request. This transport step is contained in command export .
As of Release 4.5A, more actions that prepare the export are performed in this step.
Thanks and Regards,
Naveen.

Transport control program tp ended with error code 0212 | URGENT

Hi All,
 We are trying to import requests in our PRD system. As soon as we select the request and try to import it , we get the error "Transport control program tp ended with error code 0212".
This is tp version 305.12.42 (release 46D) for ANY database
/usr/sap/trans/cofiles/K915883.<SID> for transport: <SID>K915883: Permissio
HALT 20070222114323
ERROR: /usr/sap/trans/cofiles/K915883.<SID> : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 6878
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0212
Output from tools called by tp:
This is R3trans version 6.05 (release 46D - 18.10.01 - 11:30:00).
R3trans finished (0000).
When i checked the transport tool and rfc destinations, everything was successful.
When i tried to do tp connect -
23> tp connect <SID> pf=/usr/sap/tran/bin/TP_DOMAIN_<SID>.PFL
This is tp version 305.12.42 (release 46D) for ANY database
E-/usr/sap/tran/bin/TP_DOMAIN_<SID>.PFL could not be opened.
EXIT
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
tp finished with return code: 212
meaning:
could not access file as supposed (see SLOG for more details)
We are having SAP 4.6C with DB -Oracle and OS HP-UX.
Please let me know whow to rectifiy the issue. The situation here is getting worse.
Regards,
NK

Hi Ruchit, Sorry for the delay. Here is the file you wanted -
steic25q:root>ls
DOMAIN.CFG TPPARAM.bak TP_DOMAIN_ID1.PFL TP_DOMAIN_IQ1.PFL
TMS_TEST.IS1 TPPRAMA0918 TP_DOMAIN_ID1.orig nik.dev_evt
TPPARAM TP_DOMAIN_ID1.BAK TP_DOMAIN_IP1.BAK
steic25q:root>more TP_DOMAIN_ID1.PFL
#TMS:0078:DOMAIN_ID1
Caution !
This file was generated by the Transport Management System.
Do not change this file using a text editor.
For more information, refer to the online documentation of the
Transaction STMS.
If this file was destroyed, it can be regenerated in the TMS.
To do this, log on to the domain controller (system ID1) and call
transaction STMS. In the System Overview, you can distribute the TMS
configuration. This regenerates the file.
STMS -> Overview -> Systems -> Extras -> Distribute TMS configugration
TRANSDIR = /usr/sap/trans
DU1/CTC = 1
DU1/DUMMY = 1
DU1/NBUFFORM = 1
DU1/TP_VERSION = 266
DU2/CTC = 1
DU2/DUMMY = 1
DU2/NBUFFORM = 1
DU2/TP_VERSION = 266
ID1/CTC = 0
ID1/DBHOST = steic24q
ID1/DBLIBPATH = /usr/sap/ID1/SYS/exe/run
ID1/DBNAME = ID1
ID1/DBSWPATH = /oracle/ID1/817_64
ID1/DBTYPE = ora
ID1/NBUFFORM = 1
ID1/TP_VERSION = 266
IP1/CTC = 0
IP1/DBHOST = steic25q
IP1/DBLIBPATH = /usr/sap/IP1/SYS/exe/run
IP1/DBNAME = IP1
IP1/DBSWPATH = /oracle/IP1/817_64
IP1/DBTYPE = ora
IP1/NBUFFORM = 1
IP1/TP_VERSION = 266
IQ1/CTC = 1
IQ1/DBHOST = cbnysap2
IQ1/DBLIBPATH = /usr/sap/IQ1/SYS/exe/run
IQ1/DBNAME = IQ1
IQ1/DBSWPATH = /oracle/IP1/817_64
IQ1/DBTYPE = ora
IQ1/NBUFFORM = 1
IQ1/TP_VERSION = 266
TRN/CTC = 1
TRN/DUMMY = 1
TRN/NBUFFORM = 1
TRN/TP_VERSION = 266
steic25q:root>

Re: Transport control program tp ended with error code 0212

Hi ,
When transport request is added to import queue, getting following error :
"Transport control program tp ended with error code 0212 "
Please find the slog file description as follows:
HALT 20110530001050
ERROR: /usr/sap/trans/cofiles/K904416.<SID>: cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 2273
HALT 20110530004629
ERROR: /usr/sap/trans/cofiles/K904416.<SID> : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 14341
HALT 20110530004703
ERROR: /usr/sap/trans/cofiles/K904416.<SID> : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 14514
How to correct this ?
Thanks
Srikanth

Hi,
It may happen happen due to permission issue when you are having SAN and sharing common trans directory now to check the permission of the file you have to login at os level and check the permission of the TR.
cd /usr/sap/trans/cofiles/
ls -l K904416<SID> - now here it will show the permission of the file please paste the output
Thanks,
Saleem

Tiger 10.4.3 Upgrade installation ends with "Error Occurred"

Nothing like ambiguity to help troubleshoot a software installation. (I've installed Mac OS's since 1986, so before those of you who like to flame people with problems with your favorite platform get out your flame-throwers, stop in your tracks. Comment only if you actually have something constructive to say. I'm a bigger mac-head than you.)
I have a PMG5 1.8ghz single processor rig running 10.3.9 that I got back in April (right before the free Tiger upgrade period). This weekend I bought a copy of Tiger from MacMall, along with a new iMac CoreDuo for the wife. I got it today and attempted to install it. It ran all sorts of checks, and began the installation. It seemed to progress well, albeit slowly. I got tired of waiting and took a nap before I had to go to work. I got up later to find that it ended with "Error Occurred".
Well, I thought it may be a situation of just needing another pass at it. So, I instigated the upgrade again, and asked my family to check after it. They just called to say that "Error Occurred" again.
A few things that might be of use to someone who has gone down my path and has an answer:
- I left all my peripherals attached before the installation, including an external USB 2.0 drive.
-The RAM in the computer consists of 256 mb installed by Apple, and 1gb from Crucial installed by me.
-I have installed all the firmware updates that I could find, including the one that came out specifically for my model of PMG5.
-I had 25 gb's of free space on the drive being upgraded.
-The drive being upgraded was the one that came with the computer, which was bought from the Apple Store (no third-party junk).
Anyone have any suggestions for me? I would greatly appreciate anything you could suggest. I certainly hope that a simple OS upgrade with an installer disk that should be mature by now hasn't hosed my Mac.
PowerMac G5 1.8ghz Mac OS X (10.3.9)

I have a PMG5 1.8ghz single processor rig running
10.3.9 that I got back in April (right before the
free Tiger upgrade period).
This weekend I bought a
copy of Tiger from MacMall,
along with a new iMac
CoreDuo for the wife. I got it today and attempted to
install it.
- I left all my peripherals attached before the
installation, including an external USB 2.0 drive.
Hi Glen, Welcome back to Apple's Users Help Users Forums.
No Flames, I promise.
Is the CoreDuo the new Intel version? (Pardon MY ignorance.)
Some 10.4.5 Disks are machine specific. Do you have the right ones?
Try reinstall w peripherals disconnected. That seems to be standard upgrade advice round here.
Beyond that, hope the REAL Gurus / Maestros find your thread. I'm in quarter vast mode right now. [see below.]

Client export SCC8 - ended with errors

Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan

Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan

Client Export ended with errors

Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds)         :          9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan

In Al11 what does DIR_TRANS pointing to?
Make sure you have enough space there as it will export the 2 files to the transport directory.
Have you tried Remote Client Copy.
Thanks
Adil

'import (8) ended with errors' i got this error

Similar Messages

Maybe you are looking for