Import a GarageBand zip file
On iPad Safari I downloaded a GarageBand project zip. How do I import it into GarageBand? Thanks.
<i>> if your intention is to upload a PAR file directly to
> portal(not from the NWDS ), you can use the above
> method,
> Sys Admin->Import PAR
>
> if you have a copy of the PAR file and you want to
> make some changes to it and then uploading it.....if
> that is what you are looking for.....then you may do
> the changes by importing the original PAR file you
> downloaded from the Portal to the studio and then
> make the necessary changes for example, the look and
> feel changes int the respective JSP files then deploy
> it with a different name to the Portal
> then create an iView out of this PAR put this in the
> same page, where the default iView was .
> make your new iView visible and the old one
> invisible.
> that is all.</i>
Thanks Steelman, this is exactly what I am looking for. But the application I want to change is a standard one so I can not import it in NWSD and then deploy it... With the .PAR downloaded I am going to change directly the JSP page and then to uploade the new PAR file in the portal (without NWDS). For this is it obligatory to create a new iview or could I change the .PAR of the existing Iview?
Regards,
Jerome.
Similar Messages
-
I am trying to import BPM Project.zip file into Oracle enterpriserepository
I am trying to import BPM Project.zip file into Oracle enterpriserepository from admin tab.
I am getting the following exception. please help if any one know the solution.
Performing import...
Import Failed: Error [100]: An unknown server-side error occurred. Please record stack trace (if available) and contact technical support.
com.flashline.exception.LoggableException: trouble parsing file in import bundle: SampleWScall/activityGuide.agdl
at com.flashline.cmee.openapi.service.subsystem.impexp.XMLTranslator.decode(XMLTranslator.java:157)
at com.flashline.cmee.openapi.service.subsystem.impexp.ImportJob.doJob(ImportJob.java:74)
at com.flashline.cmee.openapi.service.subsystem.impexp.AbstractJob.perform(AbstractJob.java:75)
at com.flashline.cmee.openapi.service.subsystem.impexp.JobThread.run(JobThread.java:41)
Audit results stored in:
C:\Users\AVINAS~1.YEL\AppData\Local\Temp\import-4705112223687937017.log
Audit for [Import job.] created on [2012-09-24 11:53:59 IST].
2012-09-24 11:53:59 IST - Adding Import job with ID=[50403] to job queue.
Thanks in Advance.Hi
Why are you trying to import BPM zip file are you trying to configure the out of the box workflows?
They are something that need to be deployed from the process admin on BPM.
There would be the .exp file you would need as its BPM 10g that you would need to use. -
Can't import the exercise zip files
I downloaded the exercise zip files and tried to import them to flex 3.
I can browse to the zip but flex will not let me finish.Not sure what you are saying.
Downlaoded the exercises to my HD. Created a folder "Flex in a week" and tried to import the exercises.
Same problem wirh some books. Download the source code as a large zip. unzip the file and try to import projeect folder or project zip and can't.
Must be operator error software can't be that hard
Herman -
Import e-mail zip file to numbers Mac Pro 10.10.2 procesor
Import e-mail into numbers Mac Pro 10.10.2 Yosemite can not open the zip file with data, names, addresses. Jerry
Jerry,
Numbers cannot open a zip file. drag the zip file to the downloads folder or the desktop or where ever you like.
Double click the zip file. This should "unzip" the file (that is it will uncompress the file).
then, hopefully, there is a Numbers file in the resulting files. double click the numbers file -
Error while importing zip file for second time to B2B through ant script
[echo] args=import
importstatus:
[echo] Commandline arguments 1: [import]
[echo] Import with overwrite=true
[echo] B2BCommandLineUtility: importRepository: Error messages:
[echo] MDS-00521: error while reading document /soa/b2b/tpa_JOvrtiV-7030143
019445112136.xml from metadata repository
[echo] MDS-00520: failure to read document /soa/b2b/tpa_JOvrtiV-70301430194
45112136.xml because it is not in the metadata repository
[echo] MDS-00911: Document with name "/soa/b2b/tpa_JOvrtiV-7030143019445112
136.xml" and version 16 does not exist in the repository.
[echo] ORA-01403: no data found
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
[echo] ORA-06512: at line 1
[echo]
[echo] ORA-01403: no data found
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
[echo] ORA-06512: at line 1
[echo]
[echo] ORA-01403: no data found
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
[echo] ORA-06512: at line 1
[echo]
[echo]
Can anybody plz help???
Thanks in Advance!!!Hi,
Even I am getting the same error while importing the .zip file for the second time through B2B console-->Administration-->Import/export tab.
But again it works for the third time..
Error Message:
Import of file OriginalProject.zip failed. MDS-00521: error while reading document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml from metadata repository MDS-00520: failure to read document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml because it is not in the metadata repository MDS-00911: Document with name "/soa/b2b/tpa_MnjhBHh-70301432125893445241.xml" and version 34 does not exist in the repository. ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1
Please help... -
How to import a BPEL project zip file into jdeveloper?
This worked for me before, but I seem to be doing something wrong this time.
I tried the File -> Import ->BPEL process option and navigated to the location of the .bpel file (after I extracted the .zip file contents). But this didn't seem to work as the entire project wasn't imported.You'll probably have better luck posting this in the BPEL forum
John -
Import WSDL description in zip file from was into xi
Hallo,
i´m trying to import externe Definitions into xi. I generated an zip file in the was. Here are three files:
main.wsdl, bindingsxy.wsdl, porttypesxy.wsdl. How I must handle this to use the message-types for my interface?
Thanks in advance,
FrankHi Frank,
Check this thread ...
Import SAP WSDL into External Definition
Note : for each .wsdl file in the zip file u have to create separate external definition..
Thanks and Regards,
Sridhar -
Download Presenter trial in your website but when I published object scorm in zip file miss some important file such as ismmanifest.xml. In fact Moodle upload is wrong! Is it a bug or what? Thank you.
You can publish Adobe Presenter Projects to your Moodle LMS (this will work for many other LMS’ too.)Please follow the steps as mentioned in the blog linked below.
https://blogs.adobe.com/presenter/2013/08/step-by-step-how-do-i-publish-my-presenter-cours e-to-my-learning-management-system.html#more-6260
Regards,
Rajeev. -
How to import a zipped file?
Hi-
I am trying to import a zipped file (UCSF hospitalist handbook) into itunes, so I can then put it on my iphone. I've used this handbook on my palm pilot for years, but would like to now use it on my iphone. I cannot seem to import it into itunes though. I downloaded from here: http://www.meistermed.com/isilodepot/isilodocs/isilodocs_ucsf_hospitalisthandbook.htm:
but then don't know how to get into itunes. Any help is greatly appreciated!Zip files are like wrapped presents. You have to unzip them to see what goodies are inside!
Usually double-clicking the Zip file will give you a dialog to start the extraction.
If by any chance that doesn't work, right-clck the ZIP file and choose Open With > Compressed Folders.
Presumably the contents will turn out to be iTunes-compatible files and you can add them to your library. -
How can I import iPhone Garageband Files to Mac Garageband?
How can I import iPhone Garageband Files to Mac Garageband? I've found lots of threads about this but no direct answers/how to.
ThanksWith the latest build of GarageBand on the device, move to the My Songs view, tap the Edit button at top right, select the shaking song you want to export, then tap the sharing arrow symbol at top left, tap iTunes, then GarageBand.
Connect the device to iTunes, select it in the left-hand column, then select the Apps tab. You should find the exported file in the File Sharing area of the GarageBand app and from there you can copy it to your computer, then open it with the GarageBand application.
tt2 -
Open or import a real MIDI-file in Garageband on ipad2?
how do I open or import a real MIDI-file ( xxx.mid ) in Garageband on ipad2? Neither as Mail attachement, nor via iTunes an import will work.
@squidbabyink
hello,
it seems so, that you just can move a GB-session from the ipad to the mac; the way from mac to ipad doesn't work. So here is an alternative I found in the AppStore, it's called Music Studio.
You can find infos, tutorials here:
http://www.xewton.com/musicstudio/overview/
GB may be nice for some folks; in my opinion it's a toy, but no editor.
yancy -
HT4622 How to import .band and .mid files into GarageBand for iOS
Using GarageBand for MacOS X, I have no difficulty importing and playing .mid (MIDI) files. Indeed, I can even rename .kar (Karaoke) files to .mid, import them into GarageBand for MacOS X and see the lyrics along with the score. Using File Sharing for iOS apps in iTunes.app, I have tried to import .mid and .band files (made from .mid files with GarageBand for MacOS X) using this mechanism. I get no errors but it doesn't seem to work. That is, neither the .band file nor the .mid file are accessible from within GarageBand for iOS as far as I can tell. What should I be doing instead?
As I understand it GarageBand for iOS .band projects can be imported to GarageBand for OS X, but the reverse isn't true. GarageBand for iOS does not import midi files.
The File Sharing section of iTunes doesn't validate the files you put into it, but if the app doesn't like the structure of the file it will just ignore it.
tt2 -
HELP - 88.2 k 24-bit wav file is slowing down when imported to garageband
i have an 88.2 k 24-bit wav file that is slowing down when imported to garageband. How do i get around this problem?
You need to convert it to 44.1 16 bit. You can do that with iTunes.
-
I purchased creative lightroom presets. I see the zip file in my download file and I try to import to LR but it just keeps creating a bundle never giving me the option to import (greyed out). What am I doing wrong?
Try unzipping the file first. I have no idea regarding your level of technical expertise so advanced apologies if this is really basic. A ZIP file is a compressed file containing one of more files within it. To access the files you will need to expand it. If you double-click on it first, it should open up for you. If it does not automatically expand, you can select the files and copy them to a new folder. The copy will unload them into an uncompressed form. Once they have been uncompressed, you should be able to import them.
If the import is still giving you problems, go to your Preferences, click on the Presets tab and click the Show Presets Folder button. You can then copy your purchased presets into the folder shown. You will want to copy them to the User Presets subfolder. -
I have imported a Zip files, mp3 music to my Desktop. How do I move it into iTunes. I have tried d/drop and also Import to Library without success. Can anyone help, please?
Many thanks to Limnos and King Penguin.
I have discovered! I needed software to Unzip and was directed to Stuffit from the App Store. Suddenly it is simple.
Download Zip File to Desktop.
rt> Zip >Open with..... >Stuffit Progress Bar: 'Expanding' follows. Then a blue folder (manilla) returns to Desktop.
Open iTunes >File >Import to Library From drop down select the now expanded contents of Zip file, then >OPEN
iTunes takes over and imports - Job's Done!!
Thanks again
Maybe you are looking for
-
Adding a new field to existing structure
HI all I am adding a new field to the existing structure in BW ,shall I remove all the data in the cube to fill fill this field for the previous records and reload again or any other solution thanks in advance
-
The podcasts I listen are automatically organized chronologically. I downloaded something from itunes U and it is organized by date in itunes but alphabetically on my ipod so I have no idea which one actually comes first. I'd appreciate some help in
-
How I connect remote database in report builder
username myname password mypass database test database server 192.165.21.32 port 1521 how can I connect in oracle 11g report builder ??
-
Using Portal Theme for a Web Dynpro ABAP Application
Hello everyone, I've created a web-dynpro abap application that I display on one of my portal pages using a Web-dynpro iView. Somehow, the WDA app never reads the portal theme properties and has the default SAP roadshow theme colors. I've tried almos
-
IDVD failed to render movies...will not burn
I created a movie on iMovie and then brought it in to iDVD. When I hit burn it told me that it failed to render movies and will not burn what can I do?