Import a homemade dvd into fce

I am trying to import a dvd of a show someone filmed for me but all I get is paper files when I try to import into fce the files look like this/Volumes/DVDVIDEO_RECORDER/VIDEO_TS/VIDEOTS.BUP
/Volumes/DVDVIDEO_RECORDER/VIDEO_TS/VIDEOTS.IFO
/Volumes/DVDVIDEO_RECORDER/VIDEO_TS/VIDEOTS.VOB
/Volumes/DVDVIDEO_RECORDER/VIDEO_TS/VTS_010.BUP
/Volumes/DVDVIDEO_RECORDER/VIDEO_TS/VTS_010.IFO
/Volumes/DVDVIDEO_RECORDER/VIDEO_TS/VTS_011.VOB
does anyone have any suggestions as to how to get the footage other than analog playback through my deck any software or shortcuts

Tom's writeup is good instruction.
If you use MPEG Streamclip you may also need the Apple QuickTime MPEG2 Playback Component ($19.99 from Apple) if you don't already have it installed on your Mac.
However, I'd add that you might be surprised how good the footage will look via analog playback through your deck coupled with analog-digital conversion through a camcorder or a converter such as the Canopus AVDC-110.

Similar Messages

Re user tip: How can I import a homemade DVD into iMovie for editing? - I've followed instructions so far so good, until I get to "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?

Re AppleMan 1958 excellent user tip: How can I import a homemade DVD into iMovie for editing? -
I've followed instructions with success until "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?
I installed MGEG Streamclip 193b8 and used their utility to install quicktimempeg2 and got a message stating it was successfully installed. (I'm on latest Maverick 10.9.2 on iMac) Then I dragged the VIDEO_TS file from my home DVD into the streamclip app. It asked which of 4 files to use, and I selected the first one. Streamclip played the video with the sound. so far so good. but now I cannot figure how to use quicktime player 10.3 to export this vob file out of streamclip.

Thank you for your quick reply and for clearing up my confusion. I'm exporting the first section now. I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie. I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame? If it can, what size should I select when I export?

Problems Importing from a DVD into FCE

Hi all
I have successfully imported all my own footage from my dv camcorder in FCE 4 for a wedding and placed it into a sequence. However I have recently received more footage from another chap that was filming on the day, whom gave it to me on a DVD.
I know nothing about what camcorder he was using but initially I have two big problems: There is no audio and the image is squashed once imported into FCE (he shot widescreen and I shot 4:3), however my DVD player plays the audio.
The video files read like this "VTS01.VOB", however there seems to be other files supporting: "VTS01.BUP" and "VTS01.IFO" if thats any help on how to fix the problem? I really need the audio to work in FCE and some advice on changing the widescreen clips to my 4:3 project without looking squashed.
Any advice much appreciated!
Thanks
Kev

Hi guys thanks for the links!
I think I would rather go for the hardware route simply because it sounds cheaper. I don't have an analog/ digital converter so an considering recording DVD output onto DV tape then importing it into FCE via my camcorder.
I'm kinda new to this video stuff so I have no idea how to do this. Can I just connect my Canon MVX20i to my DVD player somehow and record it to tape? I initially tried to connect it with the red, white and yellow connections in the back of the DVD player (to my camera) but nothing is happening. Neither on the record setting or playback setting on my camera.
Any advice?
Cheers for the help!

Importing DVD into FCE with decent quality

Can anyone tell me what they would do if they needed to import a DVD into FCE maintain decent quality? Not a produced movie, just like a home movie...and I can't afford DVD Pro...
Thanks very much!
Curt

Hi
My old list on this
*DVD back for futhur editing*
A. don't put a mini DVD into Your Mac unless it’s a trayloaded DVD burner/reader
B. iMovie’08 prob. 09 can import from DVD (homemade without copyprotection)
C. I prefere one of these two ways
• Copy to miniDV tape from set-top DVD-player --> Camera -or-
• Roxio Toast™ - Can back convert to streamingDV for iMovie or FinalCut
D. Read what Karsten collected.
*DVD back to iMovie.*
.. and here the complete 'full 9 yards' ... .
//discussions.apple.com/thread.jspa?messageID=3822853&#3822853
DVDs are in a socalled delivery format (mpeg2), which isn't meant and
made for any processing as editing... or, as honorable forum member
QuicktimeKirk stated. I use the analogy of the old Polaroid
"instant" cameras. Push the button, wait for the print to develop and
show it off. ..
for using the iLife apps, you have to convert'em first, in
recommended order, choose one of the following tools/workarounds.
• DVDxDV (free trial, 25$, Pro. 90$)
• Apple mpeg2 plugin (19$) + Streamclip (free)
• Cinematize >60$
• Mpeg2Works >25$ + Apple plug-in
• Toast 6/7/8/9/10 allows converting to dv/insert dvd, hit apple-k
• connect a miniDV Camcorder with analogue input to a DVD-player and transfer disk to tape/use as converter
• Drop2DV (free) a free tool claiming to convert DVDs into dv-stream...
• Use iSquint for your conversions . www.iSquint.org
from. Bobby Keene
none of these apps override copyprotection mechanisms as on commercial dvds...
//danslagle.com/mac/iMovie/tips_tricks/6010.shtml
//danslagle.com/mac/iMovie/tips_tricks/6018.shtml
be nice to copy rights ^-^
... and, next time, try the forum's search-feature...
from Beverly M.
//docs.info.apple.com/article.html?artnum=42724
Yours Bengt W

How do i capture a dvd into fce

i just started using fce and a mac but have an urgent project to work on....need help. how do i import video from a dvd into fce??

Use MPEG Streamclip to rip the disc.
http://www.fcpbook.com/Video6.html

Working alternating with iPhoto and FCE tgrying to import pictures from iPhoto into FCE suddenly all my 22300 pictures disappeared leaving empty frames. Does somebody know where the pictures could have gone and how can I get them back into iPhoto? Lothar

Working alternating with iPhoto and FCE tgrying to import pictures from iPhoto into FCE suddenly all my 22300 pictures disappeared leaving empty frames. Does somebody know where the pictures could have gone and how can I get them back into iPhoto? Lothar

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Importing a regular DVD into my Mac and the Burned

To whom it may concern,
Hi I'm trying to import a regular DVD into my Mac, but when I try to used imovie the folder containing the files is grey and I can't do anything I'm not sure if this is the best way to import a DVD (movie) and then burn it so I will have a copy. The movie that I wanna import is not an original copy is a copy of the original, but it work on any DVD player as well as in my Mac. I watched all the tutorials and none of them give me a solution. I would appreciate if someone can advised me in this matter.
Thanks and Regards
Do I need a different program?

If the DVD you are trying to copoy is a DVD-R that you made, then this may help you:
How to copy previously-burned DVD-R video discs
http://support.apple.com/kb/HT2059?viewlocale=en_US
It will not help, however if it is a protected DVD.
Sue

Importing a powerpoint presentation into FCE

I need to import a powerpoint presentation into fce. Can it be done? What does it look like? Do I need to tweak anything to make it the best possible image? Is there any online source available to learn how to do it? Any advice would be greatly appreciated. many thanks. Eileen

Agreed.
I was stuck continually doing PP Presentations and was so limited in what I was able to do. You will notice that PP on an Apple does allow you to do Quicktime transitions.... anyways.
I did finally buy Keynote (purchase iWork and it comes with Pages - Microsoft Word equivalent, however, also much better) and you can bring PP into it and do what the before was mentioned.
I am curious though... is the only reason you want to bring a PP Preso into FCP is so you have it as a movie...? Do you want to also control transitions and animations...? You would be off much easier within Keynote and have much more control as far as exporting as a .mov or .pdf and the likes; Keynote is extensive. But if it is really for stills... you can "Save As..." in PP as JPEG, and PP will kickout each slide (with or without transitions) as single jpeg files (set your resolution high...) and then obviously import the jpegs into FCP, and have still images do things....
Hope this helps, but truly you are better off with the $99.00 purchase and trump to Keynote - I got my whole office hooked!!
Sincerely, Jeffrey

Importing Sony DVDirect Video on DVD into FCE

Hello...good wishes,
I've been recording video from a Canon XL2 directly to DVD using a Sony VRD-VC20 DVDirect DVD Burner. When I try to import this video material into Final Cut Express, FCE does not recognize the format.
Apple Support says that the XL2 Camcorder is a supported device in FCE, but is not able to be conclusive regarding video recorded to DVD using the Sony DVDirect Burner.
The only way I've found to get any of this video into FCE is to play the DVD's in a standard DVD player' record the video back onto DV tape, and import them through the XL2. This is a daunting, funky proposition given the hours and hours of video I need to edit - and I worry about degradation of quality using this process.
Are there any third party drivers written out there or do any of you have ideas how I can get this video from DVD to FCE?
Thanks~

I use a Sony VRD-VC20 to burn Tivo recordings and VHS tapes to DVD. I just picked up a program called Cinematize2. It's a DVD clip extractor that retails for about $50 US. It allows you to set an in and out point on a DVD and extract the clip into a format compatible with FCP/FCE. Previously I used MPEG Streamclip 1.3.1 which allows you to export mpeg2 files to Quicktime, AVI, or DV format for use in FCP/FCE. Mpeg Streamclip also allows you to set in and out points before exporting. The link to download MPEG Streamclip 1.5.1 is: http://www.alfanet.it/squared5/mpegstreamclip.html.
In order to use the MPEG2 playback and converter feature you will also need the QuickTime MPEG-2 Playback Component. You can buy it from Apple (www.apple.com/quicktime/mpeg2) for about $30 US. If you have either Final Cut Pro or DVD Studio Pro, then the component is already installed and you don't have to buy it; but you may need to download the latest version from Apple (www.apple.com/quicktime/mpeg2/download).

How do you import video that was on VHS that is now on DVD into FCE 4?

The footage that I will be using is was on VHS and was then put on to DVD. I just have no idea if and how to import it into FCE 4. All the footage is archival that was on VHS and is being used in a documentary. So it would be great to know how to do this and any help would be great! ohh I'm also new to the FCE 4 world!

Welcome to the forum!
It would be better to work with the VHS directly as DVD-Video is highly compressed. But if that's all you have to work with, you have two options: hardware or software.
The hardware method involves connecting a DVD player's analog outputs to a qualified DV device (camcorder, VTR or converter) then connecting the DV device to your Mac via Firewire.
The software method means using MPEG Streamclip or DVDxDV to convert the DVD's VOB files into an editable format.
-DH

How to get video from DVD into FCE?

Hi,
I have a DVD which I got from a childhood friend. The DVD contains a compilation of old film clips (her family had old super 8 movies transferred to DVD). I'm trying to import the clip (it's one long video clip, 30 mins long) into FCE for editing. But, when I try to import, all I see on the DVD is one file folder labeled VIDEO_TS; this folder contains eight files with strange suffixes, such as .IFO, .VOB, and .BUP, none of which are accessible. Anyone have any idea how I can get the files into Final Cut Express?
I would really appreciate any advice. Thank you.
Vic

Hi again, Martin. I did the 'conversion', and it appeared something was happening (i.e. a 'progress bar' showed that something was going on, and it took about 20 mins or so. So, I figured it was doing the conversion. Once done, a 'play' button appeared, but when I pressed it, nothing happened. Does that sound like I'm missing the MPEG2 Playback Component?
Note: I noticed during the conversion an indication that the file, about 2 gigs seemed to be being created, but for the life of me, I don't know where the file went (i.e. I don't know where (or even if) it was stored on my computer). Anyways, the process seems not to have worked. I guess, as you said, I'll need to purchase the Playback Component?
Thanks for your help.

How can I import from homemade DVD to iMovie ?

In converting VHS to DV in iMov I use the original 1988 camcorder for obvious tracking reasons. However, I have one tape that was left in the hot sun on my dashboard and, no surprise, is very flaky, but only in camcorder playback. This happened years ago and I had to transfer the (tape only) into a new cartridge. And since I was playing back from a newer VCR it did as well as could be expected. Then last year I put all my VHS tapes onto DVD thru a Panasonic HD/DVD recorder. Since my homemade DVD has no copy protection why can't I import into iMovie? My only other option is to copy from Panasonic to DV tape and then import to iMov and I worry about quality losses with only S video coupling. All my tapes went to HD and DVD in XP mode (1 hour per DVD).

Hi,
See this thread: QuickTimeKirk, "copying dvd to imovie project" #1, 08:53pm Oct 9, 2005 CDT
You'll need to convert the dvd back to a form iMovie can import, details are in that discussion. Hope that helps.
Vicki

Importing clips from Imovie into FCE - Clips don't match

Hi
OK I have been successfully importing Imovie clips into FCE, but have recently hit a problem. I make a rough edit in IMovie but when I open the imported file in FCE I get different footage to that which sits in the IMovie project.
Yes I am opening the right clips

nothing?
ok I have worked around it a little by importing all the footage and that way I get most of it but still not all of it makes it through

Can't import ACVHD video clips into FCE?

First, I've read so many forum comments on this I'm blue in the face, but i've still not found a solution. I've spent the better part of a week reading on this issue and still no joy, so please don't ask me to search - I've done that. To set up my issue...
I have a brand new Canon Vixia HF-R32 camcorder. I shot video in ACVHD (MXP) onto the camera's internal memory. I'm using Final Cut Exoress 4 on a MacBook running 10.7.4 I have a new external terabite HD set as scratch disk.
When I connect camera to computer to download clips things work to a point. I use Log and Transfer and my clips show up in the window. I can set in and out points. I can change the clip name, add scene notes, etc. etc. BUT - when I click the "Add to Que" the problem occurs. The video begins to 'process' as indicated by the little spinning status wheel. However - nothing ever shows in the transfer bar that should show the progress being made in the transfer. When the spinning wheel stops and I click on the clip I get a red circle with exclamation point and the message "Error: No Data."
YES - I have checked preferences under the gear at top of the L&T window and YES my settings are for All formats, All rates, Apple Intermediate Codec and the audio is set to Plain. That much I gleaned from other posts in various forums, but that does nothing to solve my issue. I've also checkedunder Easy Set Up and have Apple Intermediate set there.
Tonight I spent time on phone with friend who has same type (but Panasonic) camera and same software. We compared many, many settings and all seemed to be set the same. He can import video, I cannot. When he either drags and drops clips from the L&T window or uses the "add to que" button, the status wheel spins, the transfer bar moves and when complete his clip shows up in the original FCE window for editing. Mine does not.
the software recognizes my camera, the clips are either loaded or accessed by the software, I can play the clips in the FCE viewer to set in and out points. Video and audio there is fine, but when I add to que it all falls apart.
I've already bought two video format softwares to change the MTS files to something else but that's not the route I want - I don't want to lose all the resolution. So amyone have any ideas how to get ACVHD files into FCE??? I'm about to shoot either the camera or me to put one of us out of our misery! This can't be that complicated as the ACVHD is a hugely common format.
Any help most kindly appreciated

Have you verified that your copy of FCE has been updated to 4.0.1?
MtD

Can't import uncompressed quicktime file into FCE 3.5.1

I've imported other files of this type before and feel a little stymied.
It's an uncompressed quicktime, 507 megabytes, 720 x 486, codecs are Integer (Big Endian), Animation. When I try to import it I keep getting an error message. I've gotten the message before but could figure out the problem - for example, one movie had AAC audio and FCE wouldn't take it. Don't know what the problem is here and it's driving me nuts.
I tried converting it using quicktime pro (with the DV/DVCPRO NTSC) but FCE still ends up reconverting the file again and the resulting file looks fairly crappy as a result.
Anybody know why the file won't import? Or can someone suggest what codec to use with Quicktime Pro to convert the file so FCE what re-compress it?
Any help would be much appreciated.

Hi(Bonjour)!
FCE is a fixed format application. It can handles natively (without rendering)standard def DV, HDV and AVCHD.
The timeline(sequence) format can just be either standard or hight definition one. Not quicktime animation. So the non native material has to be rendered before playing the timeline. The rendered material will have the same resolution (or format) than your timeline, thus the poor quality as you display DV material (an interlaced format designed to be monitored on TV sets).(Quicktime animation format is an uncompressed format).
Converting your non-native material with QT Pro and importing into FCE is the way to go as this process allows editing in native format.
Did you monitor your timeline content on a TV monitor?
Michel Boissonneault

Import a homemade dvd into fce

Similar Messages

Maybe you are looking for