Import a Premiere CS3 Project into Premiere Elements 7.

Is it possible (or NOT) import a Premiere CS3 Project into Premiere Elements 7?
Thanks a lot for any help.

It is only possible to open some PrE Projects into the right version of PrPro, but will not work the other way around. The error message that you will get is "This Project was created in Adobe PrPro and you need to open it in that program."
Even going the PrE to PrPro route is filled with potholes. I can open some PrE 4 Projects in PrPro 2.0, but not all - depends on what was done. Later versions of PrE will not open in PrPro 2.0, but some have opened in CS3 and CS4, though much can keep one from being able to do that.
Sorry for the bad news,
Hunt

Similar Messages

Import Premiere CS3 Project into AE

New to the Mac CS3 universe. Imported a Premiere CS3 project into AE.
Brought it in and AE made a comp from the sequence and sources from all
the media. Thought everything was fine till I scrubbed the timeline and
discovered that the Title items I had placed on my Premiere timeline
appeared to be just alpha channels. The text had not come along with the
footage.
Did I miss a step in Premiere? Used to AE and Vegas on my old Winbox, so
this CS3 integration is a nice change, but occasionally get trip ups
such as this on the learning curve.
Mac Pro Quad
CS3 Creative Suite

Ok thanks, that helps me quite a bit. The footage is all numbered sequentially so Im not mixing it up (9x1 hour blocks), but the framerates could be causing the problem. If the imported footage is HD 1440x1080 @ 25fps in Premiere, I have created a new project also set at HDV1080i 25 (50i) and imported the timeline. I then save this and import to AE, but am still getting the same problem. I know that Ive done the process backwards (premiere then AE), but out of curiosity, can you yourself get premiere transitions to work in AE? Cause I might ask adobe for new install discs if you can.
Cheers
David

Problem opening a Premiere cs3 project in Premiere cs4

i recently did a clean install on a new machine with adobe premiere cs4
i attempted to open the project in adobe cs4 that i created in adobe cs 3
( i confirmed that the project isnt corrupted as the same project plays fine on another machine that has cs3 running)
Here is what happens When i open the project in cs4 it goes through the stages below and keeps looping and indexing.
*first pass: i first see adobe indexing the project and there is a media pending display in the program display and on the time line the thumbnails have not been created where the edits are.
* second pass: adobe finishes the indexing and then i see adobe looping again to conforming the video again, there is still a media pending display in the program display but this time the thumbnails have appeared on the timeline and i see the subclips in the project bin.
* Adobe stops indexing but there is still the media pending display on the program display so then i grab the timeline slider to scroll throught the project and then the indexing process starts all over again in this endless loop.
The project is located on a local drive and i turned off indexing on the drive.
I also tried deleting the rendered and preview files from the cs3 copied project , hoping that
CS4 would recreate everything. and still no luck
Any specific steps that i can do to trouble shoot this problem

When one Opens a CS3 Project in CS4, there is a lot of work that needs to be done. I'd Open the Project, and go get some coffee (decaf, so you will not loose your patience). Just let it do its thing with no input to the computer at all. Come back in 5 - 10 mins. and see if all have been completed. Be patient.
If you are actually getting a loop in the Conforming, Indexing and the rest - remember be patient - then close down and reboot. Try Importing the CS3 Project into a New Project in CS4 to see if things improve.
BTW did I mention being patient?
Good luck,
Hunt

After Effects project into Premiere Pro

I am having trouble importing my After Effects project into Premiere. It isn't playing once I bring it in to my premiere.

What versions of After Effects and Premiere Pro? What operating system? What kinds of source footage?
What exactly are you doing? What menu commands are you choosing, and what things are you clicking, and in what order?
Here is a page that describes ways to move things from After Effects and Premiere Pro and vice versa:
"Working with Premiere Pro and After Effects
There are many ways to move things between these applications, but importing an After Effects project into Premiere Pro is not one of them, so I'm confused by your issue as you've stated it.

Importing Premiere Pro project into After Effects ???

When I import a Premiere Pro project into After Effects, it splits every shot onto a new track, ending up with a couple of hundred tracks at the end.
Is there a way to avoid this ?
Particularly, since I'd want to keep the option of bringing the project file back in Premiere for further editing.
My colorist suggested that I nest reels of my timeline and split it that way so that when he imports it he has nests on one timeline and the multiple tracks in each of those nests. Still, this feel very clunky.

An editor at work was using our Avid to do a grade on a short promo and I
wanted to see what I could do in After Effects. So when he was out of the
office I exported the timeline as an AAF and copied the OMFI media. When I
brought the project into After Effects I ended up with a massive number of
layers and freaked at first at the idea of doing anything with it.
However I thought about it again and decided to precompose all the layers,
as this gave me just one layer to work with. I then added a couple of
Adjustment Layers above it; one with a Levels effect added and the other
with HSL. I also added Masks to the Adjustment Layers so I could vignette
any effect.
The key to working like this was to use Hold Keyframes at the beginning of
each new shot for each effect, Mask Shape and Feather. I could then adjust
that shot, scrub to the next shot add new Hold Keyframes adjust that shot
and so on. When I wanted to repeat any effect settings on a shot, I just cut
and pasted the relevant keyframes. Mixes across shots can be tricky but you
can always go back to work with the original shots on their separate layers
if you need to.
I ended up with a quick grade that stood up nicely against the one done on
the Avid and I only had work with 3 layers on my timeline!

Arbitrary data param not importing from Premiere Pro project into After Effects.

Hi,
I have an AE SDK plugin effect that works in Premiere Pro and After Effects... the effect has a bunch of standard parameters and one Arbitrary Data parameter.
I believe that the Arbitrary data parameter is implemented correctly, and I have implemented all of the cases for PF_Cmd_ARBITRARY_CALLBACK...
PF_Arbitrary_NEW_FUNC
PF_Arbitrary_DISPOSE_FUNC
PF_Arbitrary_COPY_FUNC
PF_Arbitrary_FLAT_SIZE_FUNC
PF_Arbitrary_FLAT_SIZE_FUNC
PF_Arbitrary_FLATTEN_FUNC
PF_Arbitrary_UNFLATTEN_FUNC
PF_Arbitrary_INTERP_FUNC
PF_Arbitrary_COMPARE_FUNC
PF_Arbitrary_PRINT_SIZE_FUNC
PF_Arbitrary_PRINT_FUNC
PF_Arbitrary_SCAN_FUNC
The only issue I have found, is that when importing a Premiere Pro project into After Effects with the "Import -> Adobe Premiere Pro Project" option, the value in the Arbitrary Data
parameter is always the default. There is no problem saving or re-opening projects within AE or PP... and there are no problems with cutting and pasting instances of the effect.
Importing a Premiere Pro project into After Effects using the Dynamic Link works correctly... the Arbitrary data is imported.
Thanks.

Some kind of answer would be awesome... there are Adobe staff members on here right?

Editing Premiere cs4 project with premiere elements 9?

Can I open a premiere cs4 project with premiere elements 9 to edit it.
Thanks in advance

You are most welcome, though it's probably not the answer that you wanted.
There are just so very many differences between the two programs. As a test recently, I took a PREL from PrE 8, IIRC, and it would not even open in my PrPro 2.0, like my simple PrE 4 Projects would. That PrE 8 test Project was also simple, with no Themes, or Instant Movies - just Cuts and some common Transitions, no Effects. Just too different to Open.
Good luck,
Hunt

Open a premiere cs4 project with premiere elements 9

Can I open a premiere cs4 project with premiere elements 9 to edit it.
Thanks in advance

I'm going to throw out a somewhat educated guess and say no. Despite the similar monikers, Premiere Elements and Premiere Pro are two different programs.

I imported a COMPLETED book project into Aperture 3, only to discover that the resolution of all the photos has been reduced to totally unacceptable levels

I imported a COMPLETED book project into Aperture 3, only to discover that the resolution of all the photos has been reduced to totally unacceptable levels. Any easy solution?
Steps:
1. I finished an Aperture 2 (Two) book project and tried to submit it to Apple for printing. At that point I learned (belatedly, obviously) that Apple no longer accepts books from Aperture 2. I don't know how I would have known to even ask if Aperture 2 had been sunsetted as far as book projects go.
2. So I tried to download Aperture 3 ($79.99), only to be told that I couldn't download Aperture 3.5.1 because I was still running OSX 10.8.x. So I read current reviews for OSX 10.9.x, and ...
3. Downloaded and installed the current operating system (about a 3-hours process for me). OSX 10.9.2, here we are!
4. Then I returned to the Apple Store, found, and purchased Aperture 3. [For safety's sake, it would sure be nice to have a .dmg file I could copy and file away. I lost a perfectly legal and good copy of Adobe's Photoshop Elements 3 years ago because I wasn't smart enough to make a safety copy, and when my iMac crashed (fried electronic components), I was left with a copy of the software that wouldn't run, and couldn't be verified as legit.]
5. When Aperture 3 finished installing, I found and imported my COMPLETED Aperture 2 book project, which import seemed to proceed nominally -- the right number of pages, the right content on those pages, that sort of thing -- until I started looking more carefully at the pictures themselves. All of them, about 300 of them, have been imported into an Aperture 3 book project in such a reduced resolution that they are fuzzy at the size the book will be printed. Screen-capture of just one example (at 100% viewer setting):
I don't know what to do at this point to correct the problem, short of going through the entire book project, copy the custom captions (since those go away when you "delete" photo content), delete the photo, re-insert the photo, and paste back the custom caption. Lather, rinse, repeat - ~300 times! An estimated 2-3 hours of additional work.
Or does anyone in this community know either (1) that I did something wrong in the Aperture 2-to-Aperture 3 import (I don't recall being offered any options or choices in the process); or (2) that there is a wholesale one-step solution to my problem?
BTW, I tried to edit my "Product" info, but OSX 10.9.x is not in the pick list. I am running OSX 10.9.2
<Re-Titled By Host>

Frank, thanks for your note. I wrote "COMPLETED" because I had gone to a lot of effort to get the content of the book precisely as I wanted it. I would fully expect to see my level of effort and care matched by functional competence in Aperture 3 to render the book the way I created it. Too much to ask?
And yes, I upgraded the Aperture 2 Library first. [Not ALL my tens of 000s of pix, because I use Lightroom selectively for photo editing. But Yes to the Aperture 2 Library.] That step took a number of minutes, but seemed to work fine (no error messages of any kind).
Then I opened the existing book project in Aperture 3, which followed some "magic-box" process that took a minute or so. As I said, when that step was done, by all appearances the book was ready to submit for printing - until I examined the photos a little more closely. You did see the blurry example I included, didn't you? That is what each and every photo looks like.
Text-box content appears to have been rendered pertectly, for the record (including captions).
So, ... is this result something you have heard of before? Do you know of a one-step solution? Or am I looking at an extended picture-by-picture fix?

How do you import final cut pro projects into imovie? (like you create a pr

How do you import final cut pro projects into imovie?
(like you create a project in final cut but i want to save it, and import it into imovie..

Hi -
Mr. Ross is right, there is no direct way to export your project with all it's elements into iMovie.
If, on the other hand, you have a completed sequence in FCP that you want to export as a finished element, then import into iMovie for you to re-edit or apply titles, music, etc. you would:
In FCP:
Click on the Sequence Icon you want to export in your browser.
Go to the menu File > Export > Quicktime Movie. Give your movie a name a navigate to where you want it stored. Make sure you choose Settings: Current Settings and have the Make Movie Self Contained checked. Click Save.
Close FCP and open iMovie.
In iMovie:
Go to the menu File > Import > Movies and navigate to the movie you just exported from FCP. Choose if you want your movie imported in it's original size, etc.
Click Import. Your movie will be imported into iMovie.
Note that using this method only gives you only the elements that made up your FCP sequence, so this may not give you the flexibility you need.
Hope this helps.
MtD

How do i import an iMovie 08 project into Imovie 11?

How do i import an iMovie 08 project into Imovie 11?

I don't still have iMovie 08, but this method works in iMovie 11.
Go to...Home, movies, iMovie projects, find the project you want and right click and click "show package contents".
That will show a movie file and some other files. Drag the file to the desktop and rename it .mp4.
then go to iMovie, import, navigate to the mp4 file on your desktop and it will let you import to the events section and then you can add it to your movie.
Takes a lot longer to describe than to do. The quality seems to be preserved though I don't know if titles etc get transferred over, kind of doubt it.
Hugh

Trouble Import Flash Builder 4 project into Flash Builder 4.5

Hi,
I have quite a lot of Flash Builder 4 Air project which I would like to convert all of them into Flash Builder 4.5 project. However, after I tried to import it into 4.5, the project got error and saying that "application descriptor not found".
I am posting it here because I believe it is due to improper import of the air project into 4.5. Flash Builder 4.5 should be intelligent enough to solve the problem when converting the project. Hope there will be a fix for it soon
Btw, how can I manually solve this problem so that I can get all my previous projects run on 4.5? Thanks.

Hi Yue,
I'm sorry you're running into problems with Flash Builder. Would you mind reposting this over on the Flash Builder forums? You'll probably have better luck over there.
Thanks,
Chris

Its possible import a After effect projects into Motion 5?

hi guys
its possible import a After effect projects into Motion 5?

No you can't do that. Unless AfterEffects can export some sort of XML, even then I doubt everything would be translated. One way is to export layers
you know won't change as movies and import them into Motion. Then just recreate the layers that you need to change.
a

Error Importing Premiere Elements project into Premiere Pro CS5

Hi,
I am working on a multi-part video project that I started in Premiere Elements 8. I put in hours upon hours of editing on the first part and I found that the more I edited, the more often the program would crash (infuriating!). So I started using Premiere Pro CS5 to produce the second part, resolving to come back to the first part later. Well, I've come back around to needing this first part done, and it is just undoable in Elements (crashes every 20 seconds!). I'd like to import that project into CS5 if possible. The help documentation says this should be perfectly possible... but I'm having no luck.
When I attempt to open my Premiere Elements project in Premiere Pro, it tells me the project must be converted from Elements .prel to Pro .prproj, and I click through the prompts as normal. But then as soon as it starts trying to open the project, I get this:
"The Project could not be loaded. It may be damaged or contain outdated elements."
I downloaded the Premiere Elements 9 trial to see if it would be less crashy (and it is), but I'd really prefer to have all my video in one program, and CS5 does the best job (and has most of my hours invested). Elements 9 opens the "damaged" project just fine and I can edit and export normally, so why can't CS5?
Am I stuck recreating the project from the ground up in CS5?

In very general terms, a contemporary PrE Project (PREL), will Open in PrPro, with the steps that you outlined.
Now, there are all sorts of considerations, for aspects that will not likely work:
Instant Movie/Themes, as PrPro cannot read those
Some Effects that PrPro does not have, like the NewBlue FX
Some Transitions that PrPro does not have
Some Title animation Presets, that PrPro does not have
Do you have any of the above in your PrE Project? There are probably other circumstances, but those are all that come immediately to my mind.
The simpler the PrE Project, the greater the likelyhood that it will Convert to a PrPro PRPROJ file.
PrE 8 and PrPro CS5 should be close enough to work, again in those general terms. I can Open simple PrE 4.0 Projects in PrPro 2.0, but cannot Open PrE 7, 8 or 9 Projects in PrPro 2.0.
Good luck,
Hunt

Import Premiere Pro CS3 Windows projects into Premiere Pro CS5 Mac.

Hi there people. I hope you can help me. I have had premiere pro CS3 on my windows system for some years but now run a Mac with Master Collection CS5, my problem is that my existing prproj files on windows format do not open in CS5 Premiere Pro for Mac, I get a message telling me that I need to see the user guide for importing options, I have tried to do so, but there is no information about how to do this.
Can anyone here please tell me how to get around this, as I need to rework some of these old windows projects however my old windows system is totally dead now so I cannot open the files in the CS3 windows version either.
Please help, oh and spare me the useless windows vs. mac arguments.
I hope someone here can help
Thanks

Since you are trying to Open a CS3 PC Project, you should not have THAT many issues in CS5 Mac. Have you tried both the Open and Import - similar but different operations? Have both methods failed?
One possible problem would be the Effects & Transitions used in the CS3 PC Project. Here is a LIST of the Transitions and Effects in CS4 for the PC, that are missing in the Mac version. I would assume that CS3 and CS5 would be similar. However, in similar cases, PrPro has thrown a more specific error message. I have only Opened Pr 6.5 Mac Projects into PrPro 2.0 PC, and these have been almost perfect. Where there were missing Transitions, I got a very explicit message, telling me what had been used that was missing from my program, and exactly where the problem existed (specific TimeCode). In my case, two Transitions just did not exist in my PrPro 2.0, and one was a 3rd party Transition, or Effect, and I did not have that. Still, the older Mac Projects Opened fine, and I just made note of where I would need to make changes. I would anticipate that similar would occur, if the Mac version did not have some Transition, or Effect, but do not know specifically. Still, based on the warning messages that I got, with such complete documentation, I'd expect similar.
Now another consideration - Assets. If there are Assets that you cannot work with on your Mac, say DV-AVI, or WMV, those would likely throw an error. Again, I would expect that error message to elaborate a bit more.
Do you know the details of your CS3 Projects and their Assets? Anything that you can think of there?
Just thinking here, and unfortunately, I have never gone the direction that you are going, and with the versions that you are working with, so something simple and glaring (to others) might just be slipping past me.
Good luck, and maybe others will have much better input on your issue. Also - welcome to the forum!
Hunt

Import a Premiere CS3 Project into Premiere Elements 7.

Similar Messages

Maybe you are looking for