Import AfterEffects Project dialoge randomly appears?
I exported an XML from CS6 which a director then opened in CS5.5 and then sent back as an XML. I opened it in CS6 and ever since then whenever I open the project the AE project import dialoge randomly appears. This happens when I...
- First start up the program
- Start up "Export Media"
- Start up Media encoder
It might happen in other instances but it is a really werid occurance. Sometimes the program will crash when I exit out of the window.
Have him just send you his actual 5.5 project. It'll open in CS6 fine.
Similar Messages
-
Export/import whole Project
Hi,
I exported Project from one repository. Now I'd like to import it into the new repository.
I go Designer -> Projects -> Import Project
Dialog box pops up to choose file to be imported. Problem is no files are displayed within folder where the file with project physically exists.
Any advise ?short manual:
click on 'import project'.
if you want the project ID to be exactly the same as the other one, make sure the 'import type' is set to 'synonym mode INSERT'
click on the magnifying glass at 'file import directory' and locate the correct folder where the exported files are placed
click on 'open'
your exported project should now appear in the 'import project' screen.
select the project
click 'ok' -
Importing a project into PE 12 trial version, not all audio tracks play back!
I'm trying the trial vesion of PE 12. Imported a project that I had created with PE 9. Everything appears to have been imported, including all the audio tracks. But when i play it back, some of the audio tracks are completely muted, while others, are fine and I can hear it.
Any idea what can cause this?With "muted" Audio Tracks, I would look at a few possibilities, and especailly with a Project created in an earlier version of PrE:
Open Audio Mixer, and look to see if any Tracks are Muted.
Play the Timeline, and observe the Levels in Audio Mixer, and also whether there is any movement of the "sliders" in Audio Mixer.
Observe which Audio Tracks your Audio Clips are, in the Timeline, and report those please.
Making sure that Keyframe Display is set to Volume in your Audio Clips, are there any Volume Keyframes?
I am sure that others will have a few more ideas, and questions.
Good luck,
Hunt -
Randomly appearing/disappearing images
I have two images on a page that will randomly appear and
disappear when the page is refreshed. Sometimes both appear at the
same time, but with subsequent refreshing of the page one of them
will disappear, then it might reappear while the other one
disappears, then both will come back, etc. As far as I can tell it
truly is random.
I've gone over the code very methodically looking for any
anomalies, and there's nothing obvious to me. It occurs in both IE
and FF. This is the first web page I've built using Dreamweaver's
layout mode to create tables, so that may or may not be a factor.
But it's time to ask for help, because I really am stumped at this
point.
I would be more grateful than I can express for any tips
anyone can offer. You can view the code here:
http://stressfreewebsites.com/temp2/ex-a/temp2-a.html
The two rogue images are the header bars in the main text.
I have to laugh myself at the irony of the website's theme:
building 'stress-free' websites for small businesses. Stress-free
for the end user perhaps, but only because all the stress is on my
end, lol.> This is the first
> web page I've built using Dreamweaver's layout mode to
create tables
We are all hoping it's the last, too.
In my opinion, there are three serious problems with Layout
Mode -
1. Perhaps most importantly, it sits between you and *real*
HTML tables,
and fools you into believing that concepts like "layout cell"
and
"autostretch" really mean something. They do not. As long as
you use
Layout Mode, you'll never learn one of the most important
things for new web
developers - how to build solid and reliable tables.
2. Actually, #1 wouldn't be *so* bad, except that the code
that is written
by Layout Mode is really poor code. For example, a layout
table contains
MANY empty rows of cells. This can contribute to a table's
instability.
In addition, if your initial positioning of the table's cells
is a bit
complex,
Layout Mode will throw in col- and rowspans aplenty as it
merges and splits
cells willy-nillly to achieve the pixel-perfect layout you
have specified.
Again,
this is an extremely poor method for building stable tables,
because it
allows
changes in one tiny cell's shape (i.e, dimensions) to ripple
through the
rest
of the table, usually with unexpected and sometimes
disastrous consequences.
This is one of the primary reasons for the final result's
fragility - read
this -
http://apptools.com/rants/spans.php
3. The UI for Layout Mode is beyond confusing - many options
that you might
want to use are inaccessible, e.g., inserting another table,
or layer onto
the page.
I can understand the new user's desire to use this tool to
make their life
easier,
but the cost is just too heavy in my opinion.
To make good tables, keep it simple. Put a table on the page,
and begin to
load your content. If you would want a different table
layout, instead of
merging or splitting cells, consider stacking tables or
nesting simple
tables instead, respectively.
And above all, do not try to build the whole page with a
single table!
Luckily, Adobe understands the problems created for the
unsuspecting user
who falls into this trap, and has elected to remove this
feature altogether
from the next version of DW. The time is right for you to
begin working
with tables properly!
To read more about this approach, visit the DW FAQ link in my
sig, and run
through the table tutorials.
I was not able to duplicate your image behavior after many
refreshes in both
IE7 and FF2x.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"deejazz" <[email protected]> wrote in
message
news:[email protected]...
>I have two images on a page that will randomly appear and
disappear when
>the
> page is refreshed. Sometimes both appear at the same
time, but with
> subsequent
> refreshing of the page one of them will disappear, then
it might reappear
> while
> the other one disappears, then both will come back, etc.
As far as I can
> tell
> it truly is random.
>
> I've gone over the code very methodically looking for
any anomalies, and
> there's nothing obvious to me. It occurs in both IE and
FF. This is the
> first
> web page I've built using Dreamweaver's layout mode to
create tables, so
> that
> may or may not be a factor. But it's time to ask for
help, because I
> really am
> stumped at this point.
>
> I would be more grateful than I can express for any tips
anyone can offer.
> You
> can view the code here:
>
http://stressfreewebsites.com/temp2/ex-a/temp2-a.html
> The two rogue images are the header bars in the main
text.
>
> I have to laugh myself at the irony of the website's
theme: building
> 'stress-free' websites for small businesses. Stress-free
for the end user
> perhaps, but only because all the stress is on my end,
lol.
>
> -
How to import existing projects into JDeveloper 11g
I am trying to work with JDeveloper for my application and want to know whether it is possible to import existing projects into the work space in JDeveloper. I am currently working with eclipse IDE and this feature is available in it. How can I connect to clear case from JDeveloper? In eclipse it is very easy to connect to clear case with a plugin installed and check out, check in files from the source control. Any help is greatly appreciated.
The basic way to import code is to use the "New->Projects->Project from existing code" or "project from WAR" dialogs to create your project.
You then need to do some tweaking in the project properties->Content (and sub nodes such as resources and Web content).
And also set the correct JARs/Libraries in the project properties.
You can use the help->check for update to download the extension to JDeveloper that will let you integrate with Clearcase to do version management.
This how-to might help you with your migration:
http://www.oracle.com/technology/products/jdev/howtos/1013/w4wljdev/workshopandjdev.html -
I am trying to import some projects that I have on my work
machine in to my home machine. I am just getting started with Flex
builder but am having a bit of trouble understanding how it handles
projects...there is no apparent way to *completely* close one
project and open another one, so you are working on only one at a
time. Rather, it appears that you import all projects into the same
workspace, and switch between them in the Navigator (whether these
projects are related to one another or not). Is this correct?
One problem I had though, is that I cannot seem to import all
my projects. I created a directory on my work machine called
FlexProjects, and inside are two project directories, say Test and
Keyboard. I took this entire directory home with me and saved to a
local drive. Then, I used the Switch Workspace command to switch to
FlexProjects. Then, I said Import ->existing projects and
navigated to the FlexProjects folder. From here, it listed both
Test and Keyboard. It will then import Test, but when importing
Keyboard I get this message:
Invalid project description:
Reason:
Invalid project description
and the details say:
E:\projects\FlexProjects\Keyboard overlaps the workspace
location E:\projects\FlexProjects
I don't understand this - I did a compare of the Test and
Keyboard project paths and there was no obvious difference (like an
incorrect path) that would explain why Test will import but
Keyboard won't.
It is critical that I be able to port Flex projects between
home and work .. can someone help me fix this?
Thanks!That's what I figured. I'll just have to work through the background and keep as is. thanks!
-
Lose model when importing a project
Hi
I tried for the first time to import a project and I noticed that ODI had lost all links with models for target datastores :
To be more specific, when I open an interface, its status is "in error" and the target datastore appears with a red cross. When I click on the "properties" icon, I can see that my datastore is not linked to a model.
In addition, when I ask for usage of the datastore in the "model" tab, I can verify that it is not used.
NB : the project was first created in this repository (that I will call "repository A"), then exported to another (repository B). It was then deleted from repository A and imported from repository B.
The model was neither deleted nor imported.
Is there a way to save the links between project and model while importing ?Cezar - I have the exact situation that this user describes. I checked the i_mod versus the version tab/internal id of the model and they are the same. Thoughts on the best next steps?
To recap:
1) I exported from my DEV environment both my model and project folder
2) imported into my TEST (different server, etc) first model, then project folder
3) no issues on import of model or project folder
4) when I open an interface, it's in 'error' status and I cannot view data with right click on data stores (within interface) (data stores have the little red X on the top left corner)
5) I CAN view data when I right click on the table in the MODEL tab.
When I try to view data for my data stores in the diagram of my interface, I receive this error: Cannot display data: Datastores are not on the same data server
or one of the tables is not accessible on the data server
Thoughts???
Many Thanks,
Dan -
File Corrupted? Import Backup Project file?
I have a project in Final Cut X, and both the event and the project folders are on an external HD.
My mac crashed while working in Final Cut. WHen I reopen final cut, the current Project doesn not appear in the library.
(The matching event is there in the EVent Library.)
When I go to Finder, I can find the correct final cut project file. It doesn't open, saying it might be corrupt. There is a BACKUP folder, and several of those backups seem to work.... Sort of.
They open the correct video in the preview screen. It plays correctly. But.... I cannot export or make changes as there still is no "project" in the project library.
How can I import this "backup" file into Final Cut X so that I can work on it, export it, etc?
(And in a related note, the crashing is sudden and weird and only happens in FInal Cut X. It just goes black, and then a message appears saying something like, "Your computer shutdown because of a problem..." )
MacBook Pro. 8GB ram.
Can you help?
Brad in Denver.
PS. I'm freaking out. Such a headache..on a deadline and lost 5 or 6 hours of work.
PPS. THe import function doesn't seem to work for project files. (greyed out.)
Fingers crossed!! : )Something bad has been done in your project library. There should not a waveform caceh folder in there. Some of the other folders look every strange. Have you been moving things arounds inside the projects folder or into or out of the projects folder at the Finder level?
The project appears to be called Backups. Where was that located? I don't understand how a project would appear in the viewer and not be selected in the project library, while nothing appears in inspector. -
Help importing WinHelp project into RoboHelpHTML
Dear All,
I am a programmer currently evaluating RoboHelp Office X5,
with the intention of converting our existing WinHelp project to
the more modern (and vista friendly) HTMLHelp.
I have tried using the import function (RoboHelp
Starter/Import/WinHelp Project -> HTML Help.
This is a large (2000 topics) project, with a cnt file, map
file (HM) and topics.rtf file.
Robohelp chugs away for a bit, then opens the new RoboHelp
project.
The screen briefly flashes with the workspace, then
refreshes, and the HTML Files (Topics) folder in the workspace is
empty. i.e. the new project appears to contain no topics.
RoboHelp has produced HTML files (about 2000 of them), in a
topics directory, but these don't appear in the project itself.
Not sure how to progress? Any ideas?
Hope someone can help,
Merry Xmas!
RobinThis post has been duplicated in the RoboHelp HTML forum, see
there for answer.
Please do not cross post. -
In captivate version 7, I am localizing an english quiz in Russian . I can import the project captions and closed captions in the Russian translation and this works but there is one word that won't translate which is the review area button.
Any suggestions greatly welcome!
Thanks
OonaghLilybiri may be talking about this blog post that offers a solution for localising parts of the TOC that cannot be changed to match a language.
http://blogs.adobe.com/captivate/2009/02/changing_default_captions_in_t.html
There is no mention in the blog about the dialog you are interested in because it was only added in a later version of Captivate. But perhaps one of the Adobe reps here would know if it would work. You would need to know the specific name of the internal string variable that needs to be changed. -
How to import maven projects into jdev
Hi.
i have maven project created in other than jdev IDE.i am trying to import maven project into jdev.
i configured maven in jdeveloper 11.1.1.4 with help manu check for updates.
i am follwoing the [how to import maven project into jdev|http://www.oracle.com/technetwork/developer-tools/jdev/maven11g-090173.html#4]
after updating my jdev with maven extensions,i could not see maven project in file|import project menu.
why maven project is not appearing in jdev 11.1.1.4. file|import project menu ?
please help appriciate your helpThough it's not clear in that link, I believe those instructions to be for JDev 11.1.2.1.0, not 11.1.1.4.0. However somebody may correct me.
CM. -
Error Importing Adapter Project Template
I am trying to import xml template PROJ_Template_Adapter_Project and I am receiving the error message below. I am using ODI 11.1.1.5. Is anyone familiar with this error?
com.sunopsis.core.SnpsInexistantObjectException: ODI-10038: The interface you are trying to use (ERP to Logical Balances) is related to a logical schema (ERP_SOURCE) that no longer exists.
at com.sunopsis.dwg.ImportListener4XRefs.getWorkITechno(ImportListener4XRefs.java:376)
at com.sunopsis.dwg.ImportListener4XRefs.getITechnoOfSrcTable(ImportListener4XRefs.java:311)
at com.sunopsis.dwg.ImportListener4XRefs.insertTxtXRefs(ImportListener4XRefs.java:232)
at com.sunopsis.dwg.ImportListener4XRefs.insertXRefs(ImportListener4XRefs.java:183)
at com.sunopsis.dwg.DwgObject.doImport(DwgObject.java:6058)
at com.sunopsis.dwg.DwgObject.importFromXml(DwgObject.java:5650)
at com.sunopsis.dwg.DwgObject.importFromXmlWithCommit(DwgObject.java:5695)
at com.sunopsis.graphical.dialog.SnpsDialogImportXml.doImport(SnpsDialogImportXml.java:375)
at com.sunopsis.graphical.dialog.SnpsDialogImportXml$1.doInBackground(SnpsDialogImportXml.java:1248)
at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker$1.call(SwingWorker.java:240)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker.run(SwingWorker.java:278)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
at java.lang.Thread.run(Thread.java:662)Yes. We are familiar.
You are trying to import the project into a new work repository. And the Master repository for this work repository doesnt contain the logical schema ERP_SOURCE. You will have to create this logical schema (and perhaps physical schema and other connections too) and then try to import your project. -
When I attempt to send a text from the new iPad, a dialog box appears with the option to either sign in with Apple ID Password or Create New Account. I try signing in using my Apple ID password but IMessage informs me that email address cannot be verified because it is already in use ??? What am I doing wrong?
settings -> iTunes & App Store
click on apple ID listed there
select Sign Out
sign in with the proper account
from then on, when the store ask for your password it should be with the correct ID -
HEY GUYS I AM USING AN IPHONE 3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.
AND ALSO I HAVE HEARD THAT THE IPHONE 3G CANNOT BE UPDATED TO IOS 4.2!IS IT TRUE???
PLEASE HELP ME.This means that the phone you have was software unlocked to use on any carrier, or hacked. When you installed the update it restored the lock that originaly came with your phone. Not much you can do now. Apple will not support hacked phones. You will need to find out the carrier your phone is locked to and see if they offer official unlocking, or start googling to see if you can find a way to unlock 4.2.
-
I am trying to import BPM Project.zip file into Oracle enterpriserepository
I am trying to import BPM Project.zip file into Oracle enterpriserepository from admin tab.
I am getting the following exception. please help if any one know the solution.
Performing import...
Import Failed: Error [100]: An unknown server-side error occurred. Please record stack trace (if available) and contact technical support.
com.flashline.exception.LoggableException: trouble parsing file in import bundle: SampleWScall/activityGuide.agdl
at com.flashline.cmee.openapi.service.subsystem.impexp.XMLTranslator.decode(XMLTranslator.java:157)
at com.flashline.cmee.openapi.service.subsystem.impexp.ImportJob.doJob(ImportJob.java:74)
at com.flashline.cmee.openapi.service.subsystem.impexp.AbstractJob.perform(AbstractJob.java:75)
at com.flashline.cmee.openapi.service.subsystem.impexp.JobThread.run(JobThread.java:41)
Audit results stored in:
C:\Users\AVINAS~1.YEL\AppData\Local\Temp\import-4705112223687937017.log
Audit for [Import job.] created on [2012-09-24 11:53:59 IST].
2012-09-24 11:53:59 IST - Adding Import job with ID=[50403] to job queue.
Thanks in Advance.Hi
Why are you trying to import BPM zip file are you trying to configure the out of the box workflows?
They are something that need to be deployed from the process admin on BPM.
There would be the .exp file you would need as its BPM 10g that you would need to use.
Maybe you are looking for
-
Memory leak in MAX Preview resolved by build 411
I was experiencing a memory leak while using the TLF that came as part of Flex 4 MAX Preview. Over the course of several hours, instances of a class called TextAccImpl would rapidly accumulate to the point where they accounted for over 50% of memory
-
Mail freezes mac os 10.8.4
I just got the mail program to freez. It is total stoned dead. I am in the process to move our mail server to MS 365. I got good log in to our old and existing mail domain server via iphone mail and ipad mail and web verson of the mail. But the mail
-
Odd blue lines appearing in white space on screen
Yesterday I noticed some light blue vertical lines showing up all over the screen of my new 24" iMac. They're most noticeable in text fields and along the edges of browser windows on white screens, but occur in every application including the finder
-
My current internet connection is a bit sketchy, so I'm saving copies of some various Linux docs. (most from tldp) So far I have: from power up to bash prompt The Linux Kernal Intro to Linux - a hands on guide bash for beginners advanced bash I'm not
-
Error starting SAP with SSO - gssntlm.dll
Hi gurus, I have configured my instance profile to use SSO, but starting my instance iu00B4ve got this error in log file: SncInit(): Initializing Secure Network Communication (SNC) PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/32/32) SncInit()