Import Airport Extreme Network Configurations

Can I import my existing Airport Extreme configurations to the new Airport Extreme  + Time Machine?  I have an Airport Extreme with an Airport Express and AppleTV and would like to replace the base station with the new Airport Extreme + Time Machine.  Is there a way I can import the base station and network configurations to the new base station?

AirPort Utility will ask you if you want to import the settings from the base station it's replacing.
You can also elect to export an existing base station's settings before you replace it. Select the device in AirPort Utility, then the Edit button, then

Similar Messages

  • How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

    How to connect old aiport express to my new Airport Extreme?
    I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
    I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
    I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
    I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
    My Ipad says "base station e5713b cannot be configured."
    I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
    My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
    Sigve

    Hi
    Thanks for Swift reply.
    Yep - I in fact have two A1088 and one A1264
    I actually bought the new router because the Jensen
    router always lost connection to the Airport Express after some hours or days. I
    always needed to restart my Jensen to play music and that was driving my wife
    mad. The hope was that the Extreme should fix this. Both A1088 have been set up
    to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
    Are the A1088 now useless?
    The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
    Please advise
    Regards
    Sigve

  • Imported Airport Extreme useless in Germany?

    Hi,
    i´ve got a question around the use of an imported Airport Extreme from the US. My brother is on the way back to Germany an he used in the last months the "US" Version of the Airport Extreme. Can he use the Airport also in Germany? Maybe with a Firmware update? an if it is possible, where can i get one?
    Thanks in advance for your help...Jens

    ...changing the power cord and it will work?
    The power adapter converts the AC to DC. The input to the AEBS is 12Vdc, 1.8A. You may need to replace the adapter or use a voltage converter.
    ...so i can configure all the PPPoE items in the Menu?
    Networking items like PPPoE and DHCP are universal standards which can be configured regardless of where you are in the world. The required settings are dependent on what your ISP requires.

  • 17" flat panel Mac can no longer get on my Airport Extreme network

    My 17" G4 flat panel iMac can't get on my Airport Extreme network. It has been on the network for years. All of a sudden I can't get on my own network. The Airport extreme uses a WAP2 Security password. Everything else in my home is on this network ie. Blu-Ray players, Wii, Nintendo DS's, MacBook, Apple TV. The G4 doesn't even have WAP2 as an option! Where did the option go? I really don't wanna set up the network again with a WEP password(That's an option on the G4) and have to reset everything. What happened?

    There were two 17" flat-panel G4 iMacs. The earlier of the two (Part# M8812LL/A) had an optional AirPort Card. This card only supports 802.11b and either the WEP or WPA security standards. It does not WPA2. This may be the reason the G4 is not able to connect to your wireless network if you have it configured for WPA2 Personal.
    You will need to reconfigure the AirPort to use the "WPA/WPA2 Personal" option.

  • Macbook cannot find airport extreme to configure it

    macbook pro cannot find airport extreme to configure it to join an existing network.

    By default, the AirPort Express Base Station (AX) will be broadcasting a wireless network with a name like, Apple Network NNNNNN. Be sure that the MBP is connected to this wireless network BEFORE trying to access with the AirPort Utility.
    If this still doesn't work, try temporarily connecting the AX directly to the MBP by Ethernet, and then, try accessing it with the AirPort Utility.

  • IPhone 5 unable to join airport extreme network, help!!!

    I just bought an airpot extreme a week ago. After I configured it, my macbook pro can connect the wi-fi flawlessly. However, my iphone 5 was unable to join the airport extreme network. It sees the network, just can't join it. It doesn't say unable to join, I choose my network on my iphone, it shows it is trying to join, and never successfully joined. I've been trying miliion's way to fix this problem. I reset my iphone completely, reset my airport extreme, and reset the model, still never worked. Any idea?

    Was one of the million ways that you tried.....changing the name of the wireless network on the AirPort Extreme and also changing the wireless network password?
    If not.....
    Keep the wireless network name simple
    Use only letters and numbers.....no special characters (like an apostrophe or asterisk, etc)
    Limit of 20 characters or less in the name....8-10 would be ideal.
    No blank spaces
    Same rules for the wireless network password
    If that does not work, I can only conclude that the operating system on the iPhone has become corrupted....and this is an iPhone problem....not an AirPort Extreme problem.
    Best to post in the iPhone support area to let the experts over there have a crack at things....but in general you will need to reset the iPhone back to its original default settings, then restore it again from your backup. If that does not work, the iPhone needs to be replaced.
    Using iPhone

  • Automatically connecting a WEP encrypted Airport Extreme network

    My Powerbook when it turns on has no trouble connecting to my WEP encrypted Airport Extreme network. My iMac G5 on the other hand requires a manual connection to the network. This even though my Apple menu -> System preferences -> network -> configure -> Airport has "by default join a specific network" with username and password selected.
    Why does the Powerbook automatically connect when the iMac does not? Both are sitting side by side?

    Well a variant of that article did work. I called AppleCare. They had me while I was still not connected, create a new location, Configure my airport settings, and lo and behold, preferred networks was there, I was able to edit my password for my WEP connection, hit Apply Now, restart, and Change All keychain passwords, and my network automatically connected on the next login.
    Thank you.

  • Can't join the airport extreme network with my iphone~~please help

    Can't join the airport extreme network with my iphone

    What radio mode do you have the 802.11n AirPort Extreme Base Station (AEBSn) configured for? (ref: AirPort Utility > Select the AEBSn > Manual Setup > AirPort > Wireless > Radio Mode = ?)

  • Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport.  Then they can get on, but it knocks one of our devices off the network.  Any ideas?

    Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport.  Then they can get on, but it knocks one of our devices off the network.  Any ideas?

    I have not done a factory reset, I was trying to find out if I had some setting configured wrong first.  I figured I'd just make things worse if went through a reset! 
    Here is a couple of screen shots:

  • How to extend the range of my Airport Extreme network by adding an Airport Express

    How to extend the range of my Airport Extreme network by adding an Airport Express?

    You have to make sure that the AirPort Express is in Factory Default Settings. If it is straight out of the box, it is ready to be configured.
    The instructions that I will provide are for using AirPort Utility 6.0, which you have.
    Locate the Express in the same room as the AirPort Extreme for the configuration. Power it up and allow a full minute for the Express to display a blinking amber light.
    Make sure that the wireless is turned on your Mac
    Open AirPort Utility 6.0 and look at the small rectangle in the upper left hand corner of the display. It should now read something like "Other AirPort Base Stations (1)"
    Click on the rectangle, and then click on the AirPort Express xxxxxx listing
    AirPort Utility will take a minute or two to analyze the settings on your network and then suggest that  the Express be configured to "Extend" your wireless network.
    Edit the Base Station name to your liking, then click Next in the lower right hand corner
    Allow a full minute or two let AirPort Utility do its work
    When you see Setup Complete, click Done at the lower right of the window.
    Now move the AirPort Express to a location that is approximately half way between the AirPort Extreme and the area that needs more wireless coverage.
    You should be in business.

  • New to wireless Cant get airport express to join airport extreme network

    So... I just got this MBP yesterday along with airport extreme and airport express. I got the base station set up i just cant get the express to connect for the life of me... help anybody? Everything is in range i know that for a fact. I just cant get it configured and i already looked on the airport express support page and followed the instructions and i still can't get it. :-/

    Factory reset your Airport Express (AX).
    Resetting AirPort Express
    http://docs.info.apple.com/article.html?artnum=108044
    Connect to the Airport Extreme Network
    Use the Airport Assistant to configure a new base station and configure the AX to join an existing wireless network (either use client mode, only extend your network if you need to do so).
    iFelix

  • Cannot add Airport Express to Airport Extreme network

    I keep getting the message "There was an error setting up this Apple wireless device for WDS. Quit Airport Utility and try again." So I've tried a few times with different reset/reboot/configuration changes all to end up with the same message at the end. This problem seems to almost exactly coincide with my update to 10.5.8. At least the Extreme is finally playing nice after I restored it to the factory settings and updated it to v.5.7. This is really frustrating since I pipe my music downstairs through this Express and feed the TiVo.

    I'm trying to do the same thing - extend my wireless network from my Airport Extreme to 2 more Airport Expresses. I don't have a solution yet but hopefully between us both and the help of others we can get it.
    First thing I realized - I needed to go to settings on Airport Extreme and in the 'Wireless' tab check 'Allow this network to be extended'.
    Instead of WDS, I plugged in the new Express and in the 'Wireless' tab chose 'Extend my wireless network' and then chose my Airport Extreme network. Still not there, as for some reason Airport Utility no longer picks up the extremes even though I've got them plugged in right here. Perhaps a reboot after this post and we'll see what happens.
    One question to all - does it matter if any/all of these wireless base stations have encryption set to WPA or WEP? Would it affect the Extreme's ability to connect to the Express'?

  • Adding Airport Express to Existing Airport Extreme Network

    I have a wireless network created by an Airport Extreme which works well but with a disppointingly small range so I bought an Airport Express with the intention of extending the original network by using the Express as a repeater (which the chap in Regent Street store told me it could do).
    However when I try to join the Express to the existing Extreme network, the Airport Express does not even recognise my Airport Extreme network - do I need to connect the two via ethernet cable for this to work and, if so, what is the point of being wireless?

    Ok, thanks for clarifying.
    Let's double-check your extended network configuration.
    o Temporarily connect both the MacBook and the 802.11n AirPort Express Base Station (AXn) directly to an available LAN (opposing-arrows) port of the 802.11n AirPort Extreme Base Station (AEBSn) for the setup phase. Once done, move them to their desired locations.
    o Open AirPort Utility and select the AEBSn.
    o Choose Manual Setup from the Base Station menu.
    o Click AirPort in the toolbar, and then click Wireless.
    o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
    o Next, select the AXn, and choose Manual Setup.
    o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network (the one created by the AEBSn) you want to extend from the Network Name pop-up menu.
    o Enter the base station network and base station password is necessary.
    o Click Update to update the base station with new network settings.
    (ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

  • Extending Airport Extreme network with Airport Express using WDS

    I have been having some trouble using WDS between an Airport Extreme and Express, with the Extreme acting as the internet router in the network.
    Both devices have been updated with the lastest firmware.
    I am using Airport Utility 5.5.1
    *Airport Extreme Configuration*
    *Wireless Tab*
    Wireless Mode: Participate in a WDS network
    Allow Network to be extended: Checked
    Radio Mode: Auto
    Security: WPA/WPA2 Personal
    Channel Selection: Manual (Same as my Express)
    *WDS Tab*
    WDS Mode: WDS Main
    Allow Wireless Clients: Checked
    WDS Remotes: (MAC of my Airport Express)
    *Airport Express Configuration*
    *Wireless Tab*
    Wireless Mode: Participate in a WDS network
    Channel: (Same as my Extreme)
    Network Name: (my network name)
    Wireless Security: WPA/WPA2 Personal
    Allow this network to be extended: unchecked
    Radio Mode: 802.11n (802.11 b/g compatible)
    *WDS Tab*
    WDS Mode: WDS Remote
    Allow Wireless Clients: checked
    WDS Main: MAC of my Airport Extreme
    I think that covers the pertinent stuff. If there's anything else that might be useful, please just say so.
    So, the Extreme is green-lit, working fine. Wireless clients can connect to it just fine. On the Wireless Clients page the MAC of my Express is showing up, with a type of WDS listed. It does not, however, show up under the DHCP clients section.
    The Express is yellow-lit. Sometimes after a setting change it goes green for a minute or so, then back to yellow, reporting a WDS Error ("the AirPort Wireless device is set up as part of a WDS network, but no other AirPort wireless devices were found").
    The Airport Express is ending up with an ip address of 169.254.49.198 (an automatic private). It seems it's not getting an ip from the Extreme's DHCP.
    Do I have some sort of authentication issue here? Honestly I'm totally baffled.
    Any help with this would be greatly appreciated.
    Would the routers' logs be of any help?
    Thanks
    Message was edited by: Xaniel

    Wait, just did a bit more reading. Am I correct in assuming now that the "Extend a network" option will function as a wireless repeater, with no ethernet connection to the main router required
    Yes. This will provide much better wireless performance...and...its much easier to configure.
    On your AirPort Extreme, open AirPort Utility - click Manual Setup
    Click the Wireless tab below the row of icons
    Wireless Mode = Create a wireless network
    Make sure there is a check mark next to "Allow this network to be extended"
    Update to save settings
    On the AirPort Express, open AirPort Utility - click Manual Setup
    Click the Wireless tab
    Wireless Mode = Extend a wireless network (hold down the option key when you click on the selection box if you do not see this setting)
    Wireless Network Name = Click on the selection box and name of your AirPort Extreme network should appear
    Check mark next to Allow wireless clients
    Wireless Security = Exact same setting as the AirPort Extreme network
    Wireless Password = Same password as the AirPort Extreme network
    Confirm Password
    Update to save changes
    A good starting location for the Express is a point that is about 1/2 to 2/3 the distance from your AirPort Extreme to the area that needs more coverage.
    The ethernet port on the Express is also enabled, so you can connect an ethernet device if needed. Post back to let us know how things are working.

  • Imac will not connect to Airport Extreme when configured WPA/WPA2

    Imac will not connect to Airport Extreme when configured WPA/WPA2
    Posted: Jul 5, 2007 8:22 PM Reply
    I just got my Imac to connect to the internet using my Airport Extreme but only by using WEP. I had my Windows XP SP2 machines connecting using WPA/WPA2 with no problem. The Imac will not connect using anything other than WEP, and 1 of the XP machines will not connect using WEP.(I have not tried the other XP machines) I had to set the Airport Extreme for an open network in order to let both computers access the shared hard drive and access the internet.
    I don't know what the problem might be and would appreciate any suggestions.
    MacBookPro, Imac   Mac OS X (10.3.9)   Fujitsu tablet PC, 2 XP desktops

    hehe...on the visuals. I figured it out already, and I have the old airport card. However, I did a chat with Apple support and while we were chatting I found a USB adapter with MAC drivers which will work. It is:
    Hawking Technology HWUG1A Wireless-G USB Adapter with Removable Antenna for Macintosh
    Manufacturer Part# HWUG1A
    That is the only adapter that actually does WPA/WPA2 that I can find that is for a Mac and not just an older USB that only does WEP. It surprises me that Apple does not have a USB product like this. Anyway, for $56 including shipping, I will have it by Monday or Tuesday. Pretty cool.
    Thank you so much for your assistance. It is appreciated.
    Lynn

Maybe you are looking for