Import an htm or swf file

Hi, I need to import in adope captivate ( trial version ) an
htm file or an swf file of a simulation created usin Simpro. Is it
possible?
Thanks in advance

Importing SWF file is possible in Adobe Captivate.
To import an SWF, use Insert -> animation
- Dexterous

Similar Messages

Is there any way to import an htm or swf file into Captivate

I have a huge problem. I created a class in Captivate and
published to a server. The .cp file was saved locally to my c:drive
(mistake, I know) in the Captivate folders. I went through a move
with my office and my PC was moved. Perhaps coincidentally, after
the move, my original .cp file is gone. I've searched all folders
on my computer, including deleted folders, and it's not there.
However, luckily the published files are still in the shared
directory on the server. Is there anyway to reverse the publishing
process and get my original .cp file back?
Thanks for your help! Patty

Hi Patty
Unfortunately there is no way to decompile a project from
.SWF or .EXE back to a source .CP file. Personally, I've been
campaigning for a decompiler for a long while. But so far it seems
to have fallen on deaf ears. I don't believe we will see any real
effort put forth to have one unless Adobe hears from enough users
asking for it. If you would like to add your voice to those that
would like to see one, please
click
here and complete the form you should find there.
Just as a side note, you were
NOT
making a mistake in storing the project on your C drive!
Actually, the mistake is most often made by keeping the project on
the server.
Where you probably made a mistake is by not placing
a backup copy somewhere. (Even the server is a good place for a
backup)
Best of luck to you in reinventing your wheel. At least you
have the output file to guide you along!
Cheers... Rick

Better to post HTM of SWF file to intranet?

My company wants to post a Captivate project for internal use only on our intranet. My boss asked if it is better to post the HTM or SWF file and I had no idea. Any advice? Thanks!

Hi there
It sounds as though you may be confused with the output files created by Captivate.
In most cases folks want a Flash SWF file created. That file is usually loaded via the HTML page that Captivate also creates. It's sort of a house of cards. The HTML page is loaded by the browser and immediately the code looks for the standard.js file. If that file is found, it is loaded and more information is added to the HTML page. If you fail to upload the standard.js file all operation stops and things fall apart.
Once the HTML page properly loads, it then presents the SWF.
Hopefully you are seeing from this that there is no single file to upload and run. There are a few.
Cheers... Rick

Can you convert a Captivate HTM or SWF file and use it in a website?

One of my clients wants to know if it's possible to use in a website content you've created in Captivate and save as an HTM or SWF file?

You cannot access your iWork documents in the cloud through a folder structure as you can on your computer.
You might want to approach your use of these documents in the cloud in a slightly different way. I tend to use iCloud for my documents "in progress", but once complete I then move them to my regular folder structure on my computer and out of the cloud. This means I have a minimum but relevant number of documents available to me when I open the appropriate app on my mobile device.

Importing a flash Catalyst .swf file in Flash CS5 ?

Hi,
I found Flash Catalyst by luck while browsing the Adobe website and downloading the Flash CS5 trial...
One simple question....
Can I import a .swf file created in Flash Catalyst into a Flash CS5 .fla as an element ?
I created a scrolling text attached to a custom made scrolling bar in Flash Catalyst, and I would now like to use it in my Flash CS5 project...
Well, I will be waiting for your responses...
Thanks in advance for your help !
Gilbert Gour

Unfortunately you can't import an SWF from Flash Catalyst into Flash CS5. Flash Catalyst uses the Flex Framework for building the its SWF. Flash CS5 does not use the Flex Framework and doesn't know what to do with that kind of file. You can load an SWF from Flash CS5 into your Flash Catalyst project, though.

How can I import or convert a .swf file into iMovie 8

I've been searching with no luck for a way to convert a flash animation (.swf) file into a format that I can import into iMovie 8. Ideally, this would involve freeware or very inexpensive software. It is important that I maintain the quality (and audio) of the original swf file.
Can anyone suggest a route?
Many thanks.

The easiest method is to use screen capture software to "record" the .swf file as it plays.
Since .swf files use vector graphics you can scale it up in dimension (to fit your iMovie Project needs) without any loss in quality.
I'm a happy user of SnapzProX http://www.ambrosiasw.com/utilities/snapzprox/ as it records in QuickTime formats.

Import objects from external swf file

How i can import linkaged items of library of an external swf file im my project?

check the applicationdomain class.

When I reload an HTM page using a SWF file like a   menu, the HTML page doesn't shows the SWF again!

Dear Sirs,
I hope to be directing my question into the correct forum's place.
I'm new in flash and I'm trying to make some tests
My problem is the following:
I included one SWF file into 3 HTM pages.
This SWF works as a little menu.
The SWF file (named "menu.swf") contains 3 items working as command buttons to access the three different HTM pages
Each HTM page contains the same "menu.SWF" file, some HTML text and one picture.
The swf contains:
Button 1 -> calls page1.htm using:
            on (press) {
            getURL("./page1.htm", "_top");
Button 2 -> calls page2.htm using:
            on (press) {
            getURL("./page2.htm", "_top");
Button 3 -> calls page3.htm using:
            on (press) {
            getURL("./page3.htm", "_top");
When I enter to "page1.htm" it appears correctly showing the swf file and all the HTML text.
It is OK.
But when I'm in "page1.htm" and I click on "Button1" (to reload "page1.htm") the only thing that I can see (after reloading page1) is the HTML text and the picture, but I cannot view the "menu.swf" file.
"menu.swf" remains in its place, but "invisible".
You can click on its command buttons, but anytime I click on the button that loads the same page (for example: "Button 1" to reload "page1.htm") the
swf file(s) doesn't appears.
The same thing happens when I'm in page 2 with Button 2 to reload page2 .htm, and so on.
How can I do to solve this problem?
Sorry for my not good english but I'm spanish speaker.
Thank you!
Gus

The path in the buttons is not correct once you navigate to the htm page.
So here you are on the landing page and the menu button says to get to "page1.htm" go up one folder level (../) to the file page1.htm.
Now once you are up one level, either you loose access to the .swf because from that page the path to the .swf is not correct, or if the .swf does show, then the path in the buttons back to the other pages is not correct, because you are now one folder level higher.
If I am mis-reading your post and all pages are in the same folder, then remove the "../" part before the page name in the URL. Or perhaps you are using ./ to denote the current directory... I'd still suggest removing it. So the the getURL would look like this :
getURL("page1.htm", "_top");
if all pages are in the same folder.
And if I am reading your post correctly, then you cannot use the same button URL to get to ("./page1.htm", "_top"); and once on page1.htm use that same URL to get back down to your landing page.
So I'd say it's a pathing problem.
Give that a try and see if it helps.
Best wishes,
Adninjastrator

Need to resize a SWF file

i need to resize a swf file thats 800 x 300 down to 600 x 226
how can i do this without having to set the new parameters in
the embed tag like this <embed src="banner.swf" height="226"
width="600"> ..??
is there a way to resize the whole project when i export the
swf file or something.
i made my project a lil to bigger than i needed and have
already imported a few other swf files into this main banner swf
project so i need to resize everything down now..
How can i do this..??

What format is the file in before you export to SWF?
What program are you using to convert your file from its
current form to SWF?

Best way to import a Camtasia .SWF File?

I recently created a screen tutorial (as an .swf file) using
Camtasia Studio 5 and would like to import the .swf I created into
a topic of a Flash Web project I'm working on. I tried putting the
.swf on in an .htm but RoboHelp crashes. It doesn't crash with
other .swf files, but on this one it does.
The file plays fine if I double-click on the .swf inside
Windows Explorer, so it seems a problem with RoboHelp.
Now, I can get the video to work inside the project if I copy
the .swf file, the .js file, and the swf's .htm file manually copy
the project folder. If I preveiw it CTRL + W at this point it
works. If I build the project, the .swf and .htm (because I copied
them manually) don't get included into the single source layout
folder. I can probably add them manually there too and then
publish, but there has to be a better way.
Anyone have any success with importing Camtasia .swf files
into RH7 and could maybe give me some pointers so i don't have to
manually copy files everywhere?

Hi Jared
You probably simply need to add all the related files to your
Baggage Files folder.
Note that if your output is a .CHM file, I believe that
Camtasia files have a problem with running inside a .CHM. Even if
you add all the files.
Cheers... Rick

SWF file imports as 32x32 icon into DW and will not show Flash playing in browser. WHY???

I am importing a 569 x 441 Flash (CS3) swf file into
Dreamweaver. The file imports as a 32 x 32 "Flash" icon. Once I
change the pixel ratio, and select Play in DW - it looks fine. Once
I export and preview in a browser it looks nothing like my file.
WHY??? Can you please help me?

I am importing a 569 x 441 Flash (CS3) swf file into
Dreamweaver. The file imports as a 32 x 32 "Flash" icon. Once I
change the pixel ratio, and select Play in DW - it looks fine. Once
I export and preview in a browser it looks nothing like my file.
WHY??? Can you please help me?

Help importing a .swf file from Flash CS5.5 to After Effects CS5.5

I am working on animating a person in flash. I have a main timeline and then a timeline inside of a symbol so I can move
the characters facial features (eyebrows and mouth etc) apart from moving his entire body.
I want to have multiple scenes so I am importing all of the .swfs into After Effects and putting them together.
However, when I import the .swf into After Effects, it only plays what occurs in the main timeline
and not the timeline inside of the symbol, so it is just the character moving without the facial movements.
Is there a way to fix this or a better program to import the .swfs into and make the video?
Thanks in advance.

Here's the note from After Effects Help aboutt he limitations to SWF import:
SWF (continuously rasterized) Note: SWF files are imported with an alpha channel. Audio is not retained. Interactive content and scripted animation are not retained. Animation defined by keyframes in the main, top-level movie is retained.
The limitation that you noticed---that only animation in the top-level timeline is retained---is not one that can be worked around without changing how your animation is set up in Flash.

Error while importing swf file in to Crystal Xcelsius Designer 4.5

help me...., Error while importing swf file in to Crystal Xcelsius Designer 4.5

I read in the book called "CRYSTAL XCELSIUS for DUMMIES" on page 243 under topic called Nesting a Dashboard within another Dashboard.
sorry i used the wrong word embed, here i am importing the swf using image component.
My requirement is somethis like this parent child dependency menu.
eg: i have to two tabs 1)alphabets 2) Numerics First levet menu
if you click alphabets tab then the following menu A/B/C/D/..... Z i have diff charts.. under each alphabet.
If you click numberic tab then the follwing menu should one/two/three/.......ten here also i have diff charts under number
in over to avoid complexity in dynamic visibility i divided the into 3 dashboards. 1- alphabets 2- number and 3 -importing both swfs.. everything works fine except first tab and last tab under alphabets and numerics.
If some one help me with some alernative ... would be great.
Thanks

Import swf files in CP3, but export without any voice?

Did anyone have the same problem with me?
I imported swf file in slide and published. But I can't hear any voice in the slide....
At the same time, I tried to import as flv file and published, then it works. Voice in slide can be heard with no problem.
How can I fix the problem? thanks!!

Hi,
Just a quick check. Go to menu item " Edit > Preferences" and select category "Publish Settings".
Confirm that option "Include Audio" is checked.
regards,
Mukul

How can I import a .swf file in Adobe Flash CS4?

Hi,
How can I import a .swf file in Adobe Flash CS4?
Thanks.

you can use file/import but that would be a mistake.
you should "load" your swf, not import it.
if you want to load it and need help, are you using as2 or as3?

Import an htm or swf file

Similar Messages

Maybe you are looking for