Import and export help

Ok here's the problem I have been using imovie 08 to import from a jvc gz155g hdd camcorder then exporting the finished product as a small movie with quicktime setting it to steaming-medium and the end result was fine but now I have switched to FCE and find that using the same way causes the quicktime movie to look squashed using the same settings as i did in imovie to export.
Is there any way I can export and get rid of this squashed look.
I have an intel mac, quicktime pro and the mpeg2 pluggin.
The camcorder records as SD and 720x576px.
it all works fine with imovie 08 but not FCE arggh

I suspect you are shooting 16:9 but haven't told us.
To stretch it out use QT Pro as detailed at the bottom of this article:-
http://www.fcpbook.com/Video9.html
OR follow these instructions:-
In FCE select File>Export>QT Movie. (Self-contained or not is your choice but it will have no effect on the quality).
Open this file in QT Player and select Window>Show Movie Properties.
Select Video Track>Visual Settings.
Deselect "Preserve Aspect Ratio" and change "Scaled Size" to 1024.
Click "Sound Track" or the Backspace key and the image will jump to 16:9.
Close the Properties window with the red button.
Do the same with the QT Player's video window and it will ask you if you want to save it. Click "Save".
Then put the file in iDVD etc.

Similar Messages

What is the best way to import and export footage from the 5D Mark II?

Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!

ascreenwriter wrote:
Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!
1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
3. Use the Replace with Adobe After Effects Composition function.

Looking for a program that can handel import and export of palm doc files

I am looking for a program that can handel the import and export of palm doc Files that can convert them to to either txt or RTF files for Vista 32, running Palm Desktop 7.1.
Could anyone give me a few suggestions of any plug-ins that would be good me?
Hearns
Post relates to: Palm IIIxe
This question was solved.
View Solution.

Ok, you need to clean uninstall Palm desktop 6.2. Install Palm desktop 4.1.4 and download and install documents to go version 6.
Here are the clean uninstall instructioins for Vista.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. Use the username that is on the handheld.

Internal table with Import and Export

Hi All,
Hi all
Please let me know the use of <b>Internal table with Import and Export parameters and SET/GET parameters</b>, on what type of cases we can use these? Plese give me the syntax with some examples.
Please give me detailed analysis on the above.
Regards,
Prabhu

Hi Prabhakar,
There are three types of memories.
1. ABAP MEMORY
2. SAP MEMORY
3. EXTERNAL MEMORY.
1.we will use EXPORT/ IMPORT TO/ FROM MEMORY-ID when we want to transfer between ABAP memory
2. we will use GET PARAMETER ID/ SET PARAMETER ID to transfer between SAP MEMORY
3. we will use EXPORT/IMPORT TO/FROM SHARED BUFFER to transfer between external memory.
ABAP MEMORY : we can say that two reports in the same session will be in ABAP MEMORY
SAP MEMORY: TWO DIFFERENT SESSIONS WILL BE IN SAP MEMORY.
for ex: IF WE CALL TWO DIFFERENT TRANSACTIONS SE38, SE11
then they both are in SAP MEMORY.
EXTERNAL MEMORY: TWO different logons will be in EXTERNAL MEMORY.
<b>Syntax</b>
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
Saving Data Objects in Memory
To read data objects from an ABAP program into ABAP memory, use the following statement:
Syntax
EXPORT <f1> [FROM <g 1>] <f 2> [FROM <g 2>] ... TO MEMORY ID <key>.
This statement stores the data objects specified in the list as a cluster in memory. If you do not use the option FROM <f i >, the data object <f i > is saved under its own name. If you use the FROM <g i > option, the data objet <g i > is saved under the name <f i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
Check this link.
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
Thanks,
Susmitha.
Reward points for helpful answers.

Import and export a root site in a site collection in sharepoint2010

Hi,
I have site-collection in sharepoint2010 i.e. http://test.com/ and i have subsites under it that looks like this http://test.com/HR,http://test.com/payroll etc..
root site in site-collection i.e. http://test.com/ has to be imported from other SharePoint farm but the subsite under it should not changes i mean the HR and Payroll
let me know how to import a root site from prod farm with out affecting the subsites or breaking the subsites..
if this is possible, please let me know the import and export commands without affecting the subsites
Thanks,
sarath.
Sarath Sannadi Sharepoint Dev at Saksoft

If you want to restore it root level in target farm then the Subsite under the site collection will not change.
you use Backup-SpSite
Backup-SPSite http://test.com -Path C:\Backup\site_name.bakand then in the target farm use Restore-SpsiteRestore-SPSite http://test.com -Path C:\Backup\site_name.bak -Forcechange the path accordingly.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Difference between Import and Export parameters in Function Module

Hi All,
I am unclear about the import and export parameters, when i create a function module. Can anyone explain abt this. However when i call the function module in any program the import parameters in Function module are displayed as exporting in program amd the export parameters as importing.
Any help on this would be appericiated.
Shejal.

HI,
Import parameter in FM is the value u provide to FM for processing.
export is the value u get from FM after processing.
when u call a FM in a progam the import parameter will appear as Export bcos u r giving value to the FM.
and u r getting value from FM in import parameter(bcos u r importing).
rgds,
latheesh
Message was edited by: Latheesh Kaduthara

Import and export in linux.

hi
can anyone guide me how to import and export dump files in Red Hat linux 5.2?
also i searched over the ineternet but i did not understand because i am newbie to linux.
can anyone help me out and guide me step by step?
i also posted on Database-General but i just got links there.
can anyone guide me step wise?
i am newbie to linux.
i tried the following commands.
$ imp system/pass@db file=file_name log=log_name full=y
but it gave me new problem something like this.
export-import>
i did not understand the above one.
thanks in advance.
sarah
Edited by: QGIRCO on Apr 27, 2010 4:58 AM

Unfortunately based on what you have provided and what I read on your other post you probably won't get much more than links on this forum as well. The documentation is pretty clear on how to use IMP / EXP.
Have you been able to follow the documentation and the examples provided? You mentioned on your other thread that you know how to do it in Windows. Well the same logic applies in Linux except maybe the path to your file and permissions.
Also, in the future please don't double post (even across forums).

Import and Export transport requests on Netweaver 2004s Sp11 Sneak Preview

Hi Experts,
I have configured the transportation system <STMS> in order to import and export transport requests on the NSP system. The configuration is working properly as files can be imported and exported out of the C:\sapmnt\trans directory. (configuration distributed by STMS -> Overview -> Systems -> Extras -> Distribute TMS Configuration, Folder SAPMNT shared).
The problem I'm facing with the import of some example transports is given by the hanging import queues. In phase 'Import ABAP Dictionary Objects' I have the following message for almost all objects -> '... was not imported in this step'.
I tried to solve this issue by running SE38->RDDNEWPP with DDIC user to schedule job RDDIMPDP for TP imports. I also made the config in TP_DOMAIN_NSP.PFL with SYSTEM_PF = C:\SAP\NSP\SYS\profile\DEFAULT.PFL.
The error is still in logfile SLOG0732.NSP
ERROR:       The following call returned with exit code 7:
ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=NSP
and logfile dev_evt
ERROR ***: MsSndTypeOnce, rc = -20
ERROR ***: Event raise failed
With the exports there is a similar issue in the EXPORT phase, given the note
0 entries from WDY_APPLICATIONT exported.
Batch process is available (parameter rdisp/wp_no_btc = 1)
Profile has been activated by rz10->utilities->import profile->ofactive servers.
Any ideas what still can be wrong? Does the import export and DDIC activation really work with the sneak preview?
Thanks
Christoph

Hi Peter
First of all thanks for your advice.
I did No. 1. 2. 3. steps.
Step 4. reacts with the folowing error message.
Transport control program tp ended with error code 02008.
Errors: error in transportprofile (param missing, unknown).
My license expires in four days. I tried to extend it via http://www.sap.com/minisap
1. System-ID *
2. Hardware-Schlüssel (HWID) *   ?
3.Systemnummer ?
What is to be entered in 1 and 2.
Where should I look for HWID and Sysnr ?
Thanks a lot again for your help
With regards
Fisseha

Import and export MDM with the SAP Portal

Hi,
Would you have any clue on how to handle import and export from the SAP portal ?
I need your help because I haven't found any standard iView to perform these functions
The only information i got were some explanations on WebDynpro Java iViews using events to export from the Portal.
Thank you in advance

Hi,
MDM iViews are only meant to perform MDM Data Manager operations but on limited basis. EP-MDM scenario has been designed for end users only which should not allow to perform complex data manager operations and they need not install MDM Clients.
Thats why importing and exporting functionalities are not possible in standard MDM iviews.
Regards,
Jitesh Talreja

Import and Export Script

Hello All Readers,
Here I want to know all the parameters of Database Import and Export Command and all the possible methods of Imp/Exp. Please help me to find those.
Thanks in Advance.......

May be u can read this to get fair knowledge
http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96652/part1.htm#435787

Import and export the database table

I would like to know what is the syntax of using imp.exe and exp.exe to import and export the database table?
Could anyone teach me what is the syntax and how could do the export and import in the Forms?
Thanks a loT~

try: imp help=yes
Or read the documentation online on OTN.

Import and Export Universe Restriction Sets

Hello Gurus,
We have a universe which has 100+ Restriction sets. We are in the process of migrating & testing BI4.0. As the developments are still going on in 3.1, Its getting difficult to manage the secuirty(Restriction sets) to deploy in multiple environments.(Restriction sets)
Is there a vb macro or pre-defined SDK to import and export the Universe Restriction sets from 3.1 Universe Designer to 4.0 Designer.
Thanks !!

Why cant use merge them using union/union all if intention is to get them to same sheet? Is it like the metadata is different so that they cant be merged to single sheet?
If that being the case you need to do it in two steps.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Import and Export Vs. Tables in a Function module interface

Hi,
i need to import and export internal tables to/from a Function Module.
Passing internal tables using import and export is good enough or do i need to use 'Tables' option. Please let me know the reasons if possible.
thanks for your help.
GK.

you can use changing but you have declare a table type and use it in changing..
however TABLES is declared aas oblselete in ECC version 6.0
No Points Plz

Import and export in odiconsole

Hi Guys,
Can we do import and export the ODI scenarios using ODI console.
I aware of that we cann't do the import/export in ODIConsole.
Please can any one help me if it is posible, provide the steps.
Thank you
Regards,
Phanikanth

Canot explain more better than this link.
http://docs.oracle.com/cd/E23943_01/integrate.1111/e12643/odi_console.htm#BABGCDID
Bhabani
http://dwteam.in

Is it possible to import and export Config Toll Configuration from one sys

Hi All,
Is it possible to import and export Config Toll Configuration from one system to Another system (QUS/PRD), for especific service.
Kindly let me know the pro and corn of it and step by step process
Thanks alot for your time.
Thanks
AB

Yes...It is certainly possible but then you would need to bring OS level j2ee filestructure as well and there are lots of changes at OS level in *.properties file and then at configtool level changes related to hostname, system numbers and port numbers etc.
This is not much difficult but not impossible also if you do it very carefully. Please note that SAP DOES NOT SUPPORT THIS METHOD.
alternatively, you can use sapinst to export-import j2ee filesystem from source to target which inturn would require to do configtool export/import and then changes at configtool level.
Do let us know your requirement so that we cud help you in case you are facing any issues.
cheers !!!
Ashish

Import and export help

Similar Messages

Maybe you are looking for