Import and export problems!

I'm new to Aperture so bare with me please, I'm using the cannon Rebel XT, I noticed ( after an update I'm thinking) that when I wanted to import from the camera the frames were randomly placed, and when I click X to close and then click import again they would be in order, I called about this and the speaker said, well it seems like you have it working, I was hoping that with a new updates this would be fixed,( like it did with contact sheet) then I wanted to export a project to a RW-CD the same thing happen when checking the CD the Image were randomly placed and very unprofessional, Can anyone help me with this? Should I reinstall the aperture program?
mac book pro Mac OS X (10.4.8)

Hi Billy,
No, don't reinstall Aperture, though do consider trashing the plist file:
user/Library/Preferences/com.apple.Aperture.plist
This will not break anything, but you will need to reset your preferences when you relaunch Aperture. So, note them down first.
Are the images out of order in the IMPORT viewer or after you import into a project?
If in the IMPORT viewer, then I have no clue.
If in the Project viewer,check to see whether the sort order is image date or custom or version name. Image date is usually good.
I'm not sure about the export side, as file order is (typically) seen using Finder, based on which column you wish to sort on. Does clicking the Name or Date column heading give you the desired result? Or are you seeing the order through some other means? Please explain.
Thanks,
G.

Similar Messages

Data importing and exporting problem between BADI's

Hi Experts,
I am facing a problem in importing and exporting the data between badi's.
I am able to import and export the data between DOC CHANGE and DOC CHECK BADI's etc; but now i have a requirement to map a field from SRM to R/3.
Supplier order key field which is added to the basic data section of Shopping Cart should be mapped to the corresponding fields in R/3. I have added the field and when i am trying to map it to R/3 i am facing the probelm.
This Supplier order key field will be coming from ZBBP_CATALOG_TRANSFER badi and i am trying to map it in the Z_BBP_CREATE_PO_BACK Badi; i tried by using the below statement to export a single parameter to PO BACK badi from CATALOG TRANSFER Badi
EXPORT zsupp_ord_key FROM zsupp_ord_key TO MEMORY ID 'Z_SUPP_ORD_KEY'.
which is not working.
IMPORT zsupp_ord_key TO zsupp_ord_key FROM MEMORY ID 'Z_SUPP_ORD_KEY'. in PO BACK BADI.
Can any one please let me know why this is happening?
And i have strange problem in this ...
when a user copies a catalog which is already created then we can not map the field to R/3 PO
and again if he tries to create a cart by selecting "Old carts which are already created" we cant map field for the above two things to happen i think we need a custom coding .....
Thank you
Lokesh.

Hi Lokesh,
BADI implementations have classes for which an instance is created at runtime and hence the import and export memory logic will not work.
Please try to create a function module for these BADI and call them in these BADI's. Then go ahead with the import and export logic. This could help.
I would rather advice, to figure out an option to avoid this memory manipulations.
Regards
Kathirvel

IMPORT and EXPORT PROBLEM

Hi All
I have a problem.I need to export the data and then import it inot another database.I used imp and exp file but it is not exp and imp data but exp and imp database structure,triggers,procedure etc but not data
Please tell me how should i proceed.
Thanx
Manoj

When you export, it will list all of the table structures that you are exporting. You can limit some of the other information that it exports by setting parameters.
I assume that the database you want to import into already has all of the table structures and grants.
When you export, set the following parameters:
GRANTS=N
INDEXES=N
CONSTRAINTS=N
TRIGGERS=N
The default for exporting data is Y so you don't need to include that.
It will still export the table structures but you can ignore them on import.
Then on import, set the following parameters:
GRANTS=N
INDEXES=N
CONSTRAINTS=N
IGNORE=Y
The default for importing data is Y so you don't need to include that.
That will import data and not import table structures unless there is a new table in the database that you export from.
Another option that might help is to export by using a table list. This will eliminate the issue of export procedures.

Page and group Import and export problems

we are migrating from portal 3.0.6
(part of ias 1.0.2.0.1)
to
3.0.8(part of iAS 1.0.2.1).
OS:Solaris 2.6
The exports from 306 works fine.
when i imported security data for users and groups(secimp.csh) it swapped the users for two groups
i get the following error when i try to import pages
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL30.WWUTL_POB_TRANSPORT", line 1879
ORA-01403: no data found
ORA-06512: at line 6
Anybody has this problem?
Thanks
null

Hmm.. export/import only works between portal installations at the same version level. What you need to do is to use the upgrade scripts that will take you from Portal 3.0.7 to Portal 3.0.8, which are not available yet. We hope to make these scripts available in a couple of weeks on OTN. (Yes.. I too am waiting for these scripts).
Best Regards,
Harry Wong

Problem with Import and Export Data Wizard

Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
to use.
After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
How can I correct this problem?

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

Looking for a program that can handel import and export of palm doc files

I am looking for a program that can handel the import and export of palm doc Files that can convert them to to either txt or RTF files for Vista 32, running Palm Desktop 7.1.
Could anyone give me a few suggestions of any plug-ins that would be good me?
Hearns
Post relates to: Palm IIIxe
This question was solved.
View Solution.

Ok, you need to clean uninstall Palm desktop 6.2. Install Palm desktop 4.1.4 and download and install documents to go version 6.
Here are the clean uninstall instructioins for Vista.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. Use the username that is on the handheld.

Import and export a root site in a site collection in sharepoint2010

Hi,
I have site-collection in sharepoint2010 i.e. http://test.com/ and i have subsites under it that looks like this http://test.com/HR,http://test.com/payroll etc..
root site in site-collection i.e. http://test.com/ has to be imported from other SharePoint farm but the subsite under it should not changes i mean the HR and Payroll
let me know how to import a root site from prod farm with out affecting the subsites or breaking the subsites..
if this is possible, please let me know the import and export commands without affecting the subsites
Thanks,
sarath.
Sarath Sannadi Sharepoint Dev at Saksoft

If you want to restore it root level in target farm then the Subsite under the site collection will not change.
you use Backup-SpSite
Backup-SPSite http://test.com -Path C:\Backup\site_name.bakand then in the target farm use Restore-SpsiteRestore-SPSite http://test.com -Path C:\Backup\site_name.bak -Forcechange the path accordingly.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Import and export in linux.

hi
can anyone guide me how to import and export dump files in Red Hat linux 5.2?
also i searched over the ineternet but i did not understand because i am newbie to linux.
can anyone help me out and guide me step by step?
i also posted on Database-General but i just got links there.
can anyone guide me step wise?
i am newbie to linux.
i tried the following commands.
$ imp system/pass@db file=file_name log=log_name full=y
but it gave me new problem something like this.
export-import>
i did not understand the above one.
thanks in advance.
sarah
Edited by: QGIRCO on Apr 27, 2010 4:58 AM

Unfortunately based on what you have provided and what I read on your other post you probably won't get much more than links on this forum as well. The documentation is pretty clear on how to use IMP / EXP.
Have you been able to follow the documentation and the examples provided? You mentioned on your other thread that you know how to do it in Windows. Well the same logic applies in Linux except maybe the path to your file and permissions.
Also, in the future please don't double post (even across forums).

Import and export

my import and export utility in oracle database 10g is not working. how to overcome this problem.

my import and export utility in oracle database 10g is not working. how to overcome this problem.why? Post the error with more information.
-Anantha

Import and Export transport requests on Netweaver 2004s Sp11 Sneak Preview

Hi Experts,
I have configured the transportation system <STMS> in order to import and export transport requests on the NSP system. The configuration is working properly as files can be imported and exported out of the C:\sapmnt\trans directory. (configuration distributed by STMS -> Overview -> Systems -> Extras -> Distribute TMS Configuration, Folder SAPMNT shared).
The problem I'm facing with the import of some example transports is given by the hanging import queues. In phase 'Import ABAP Dictionary Objects' I have the following message for almost all objects -> '... was not imported in this step'.
I tried to solve this issue by running SE38->RDDNEWPP with DDIC user to schedule job RDDIMPDP for TP imports. I also made the config in TP_DOMAIN_NSP.PFL with SYSTEM_PF = C:\SAP\NSP\SYS\profile\DEFAULT.PFL.
The error is still in logfile SLOG0732.NSP
ERROR:       The following call returned with exit code 7:
ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=NSP
and logfile dev_evt
ERROR ***: MsSndTypeOnce, rc = -20
ERROR ***: Event raise failed
With the exports there is a similar issue in the EXPORT phase, given the note
0 entries from WDY_APPLICATIONT exported.
Batch process is available (parameter rdisp/wp_no_btc = 1)
Profile has been activated by rz10->utilities->import profile->ofactive servers.
Any ideas what still can be wrong? Does the import export and DDIC activation really work with the sneak preview?
Thanks
Christoph

Hi Peter
First of all thanks for your advice.
I did No. 1. 2. 3. steps.
Step 4. reacts with the folowing error message.
Transport control program tp ended with error code 02008.
Errors: error in transportprofile (param missing, unknown).
My license expires in four days. I tried to extend it via http://www.sap.com/minisap
1. System-ID *
2. Hardware-Schlüssel (HWID) *   ?
3.Systemnummer ?
What is to be entered in 1 and 2.
Where should I look for HWID and Sysnr ?
Thanks a lot again for your help
With regards
Fisseha

Regarding import and export memory

hi, currently i have encountered this problem when i am using the import and export memory statement. After i export my table name from program1 to program2, i do an import statement at program2 to retrieve the table name but there is a problem in retrieving the name. Below are the codes.
PROGRAM1's codes:
EXPORT IO_TABLE TO MEMORY ID MEM_STR.
SUBMIT PROGRAM2 AND RETURN.
PROGRAM2's codes:
IMPORT IO_TABLE TO MEMORY ID MEM_STR.
P_TABLE = IO_TABLE.
FREE MEMORY ID MEM_STR.
CLEAR MEM_STR.

Check these programs they are working fine, the report ZCALLING calls the report ZCALLED.
REPORT ZCALLING.
DATA:
BEGIN OF IO_TABLE OCCURS 0,
MATNR TYPE MARA-MATNR,
END OF IO_TABLE.
IO_TABLE-MATNR = '38'.
APPEND IO_TABLE.
EXPORT IO_TABLE TO MEMORY ID 'MEM_STR'.
SUBMIT ZCALLED AND RETURN.
REPORT ZCALLED.
DATA:
BEGIN OF IO_TABLE OCCURS 0,
MATNR TYPE MARA-MATNR,
END OF IO_TABLE,
P_TABLE LIKE STANDARD TABLE OF IO_TABLE WITH HEADER LINE.
IMPORT IO_TABLE FROM MEMORY ID 'MEM_STR'.
P_TABLE[] = IO_TABLE[].
LOOP AT P_TABLE.
WRITE P_TABLE-MATNR.
ENDLOOP.

Regarding import and export statement

hi experts,
how to import and export the internal table between programs...
Nice solutins with maximum points.....

Example of a program exporting an internal table to ABAP memory.
Prog 1
parameters: pa_vbeln like vbak-vbeln.
data: itab type standard table of vbak.
* get data to fill the table
select * from vbak into table itab
            where vbeln = pa_vbeln.
* now store the internal table to ABAP memory
export itab to Memory ID 'table''.
* here we call another program, prog 2
submit prog2 and return.
Prog 2 -> This imports the internal table exported by prog 1 and writes the content of the internal table to a list
data: jtab type standard table of vbak,
       wa_vbak type vbak.
* importing the itab that was exported by prog1
import itab to jtab from memory id 'table'.
loop at jtab into wa_vbak.
write:/ wa_vbak-vbeln,
        wa_vbak-erdat.
endloop.
* clear the specific memory id after required processing is complete
free memory id 'table'
Hope this solves your problem.
Cheers,
Sougata.
Subas,
Copy/paste your code, I'll have a look. First check if data is being selected before Export command.
Edited by: Sougata Chatterjee on Jan 11, 2008 12:31 PM
Also make sure you create prog2 as an executable program. Then, run prog1 with a valid Sales Order number. To understand it more clearly run it in debugging mode and step through. It should work fine in any system.
Edited by: Sougata Chatterjee on Jan 11, 2008 12:42 PM

Import and export CRM catalogue

Hi,
I am neewbie in CRM.
I would like to export CRM catalogue, and then import it into other computer.
For example, I am in TEST environment... navigate into "COMM_PCAT_ADM" and select "SALES_CATALOGUE".
I would like to EXPORT "SALES_CATALOGUE" to other TEST environment in a different computer.
1.- How could I do this?
2.- Do I have to export and import the catalogue or just tables / programs?
3.- Do I need any other information to export and import? For example Materials...
4.- How do I export the catalogue? Software?
5.- How do I import the catalogue? Software?
Thanks,
Regards.
Iker Espinosa.

my import and export utility in oracle database 10g is not working. how to overcome this problem.why? Post the error with more information.
-Anantha

Import and export taxation

hi sd gurus,
Can somebody let me know the import and export taxation related information, iam new to this particular topic, kindly advise, and provide me how to do and what to do,
thanx in adv
Mallikarjun

my import and export utility in oracle database 10g is not working. how to overcome this problem.why? Post the error with more information.
-Anantha

Import and Export MDL error with OWB Release 2

Getting the following error when importing and exporting MDL - any assist would be appreciated - never had this issue with previous releases - error as follows:
Error occurred exporting metadata to file "C:\TEMP\MY_PROJECT-20061208_1058.mdl".
java.lang.Exception: CNV0002-0038(ERROR): Cannot write to file ./../../reposasst/converter.properties. Please make sure that write privileges are enabled or that disk is not full.

I got the solution. OWB writes some temporary xml files before importing/exporting mdl and these files are stored in OWB home directory. The problem is write privileges on the OWB Home directory. I am not local admin of my system. Admin installed the OWB client on my system through his userid. Now if i try to create a directory or file in OWB home directory it thorws an error "Access Denied". I got the Admin rights on my local system for my userid and now OWB is working fine.
Thanks.

Import and export problems!

Similar Messages

Maybe you are looking for