Import and Method Execution Error (8)

Hi,
I having problem in BI 7. when I transport all objects in one transport number such as
DOSTransformationDTPDSInfoPackage and transport in QA works fine
but when I move in PRD no efect in there and get this messages:
Method Execution with error (8)
I check transport layer and other setting everying is ok... please advised me what should I do
Thank in Advance
Angeline

Hi,
Check the correct Error log in STMS_IMPORT and then select your error req and click on Log and expand teh message and see the exact error message and corretc it and re transport it.
Don't mix all obejcts in single request.
First Transport the Package then
1. InfoObejcts.
2. Cubes, DSO's
3.DataSources from ECC Dev to ECC Qty
4. DataSource Replication in BW Qty
5. InfoSources.
6.Transformations in between DataSource and InfoSource.
7.Transformations in between InfoSource and InfoCube/DSO.
8. DTP's & InfoPackages.
9. Multiproviders/InfoSets.
10. Reports.
Thanks
Reddy

Similar Messages

BI Transport Req Error 8 - Error in Import and Method Execution

Hi All,
I have collected the Update Rule in a Transport Request. The Update Rule has couple of lookup routine(s) for the data and key field.
When Moved the transport request to Quality the same is ending with error 8.
Error at the time of Import
R3TRROUT 3AQ..........was repaired in this system
Object R3TRROUT 3AQ.......... is in repair status. Therefore cannot be imported
Procedure: If you still want to import release the relevant repair and repart the import
Error message at Method Execution Log
Object ROUT 3AQ.... has not been imported successfully
The Object R3TRROUT 3AQ.......... has not yet been imported without error.
Import Post Processing is not performed for this InfoObject.
Note : I have tried this couple of times but the error remains same. Checked the Routines in development and quality and they are all same....Could not able to analyse what exactly is the error.
Please help. I am not able to understand how to go a head.

Dear Pavan,
Iu2019m going try to help you regarding your question,
I have been a similar problem with transformation, the transport request after accept in the system target have given a similar error. I have fixed following the next step:
u2022 I activating again the source and target, if those source and target was changed it is important to transport before the update rule.
u2022 When you are sure that you have the same source and target in both systems, furthermore both have been activated, you can move on with the transport request of update rule.
I hope this suggestion can help you to answer your question,
Luis

Import and Export MDL error with OWB Release 2

Getting the following error when importing and exporting MDL - any assist would be appreciated - never had this issue with previous releases - error as follows:
Error occurred exporting metadata to file "C:\TEMP\MY_PROJECT-20061208_1058.mdl".
java.lang.Exception: CNV0002-0038(ERROR): Cannot write to file ./../../reposasst/converter.properties. Please make sure that write privileges are enabled or that disk is not full.

I got the solution. OWB writes some temporary xml files before importing/exporting mdl and these files are stored in OWB home directory. The problem is write privileges on the OWB Home directory. I am not local admin of my system. Admin installed the OWB client on my system through his userid. Now if i try to create a directory or file in OWB home directory it thorws an error "Access Denied". I got the Admin rights on my local system for my userid and now OWB is working fine.
Thanks.

Import and recognize class error

The following is a simple welcome.jsp file that I am trying to run on a local J2EE sever. As you can see it tries to import classes one being the FaqCategories.class which is located in the folder Ch03 of the WEB-INF directory. When I call the page up on the browser It gives me that it does not recognize the FaqCategories faqs = new FaqCategories; class error. I am wondering why(Is the import statement wrong? Did I put the class in the wrong directory? Etc... I followed everything the book told me to a que and I still received an error.
<&@ page errorPage="/WEB-INF/errorPage.jsp"
         import="java.util.Iterator,Ch03.FaqCategories" %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
     <title>Java FAQ Welcome Page</title>
   </head>
   <body>
     <h1>Java FAQ Welcome Page</h1>
     Welcome to the Java FAQ
<%! FaqCategories faqs = new FaqCategories(); %>
Click a link below for answers to the given topic.
<%
    Iterator categories = faqs.getAllCategories();
    while(categories.hasNext()) {
       String category = (String) categories.next();
   %>
      <p><a href="<%= replaceUnderscore(category) %>.jsp"><%= category
   %></a></p>
   <%
    %>
   <%@ include file="/WEB-INF/footer.jspf" %>
      </body>
     </html>
      <%!
       public String replaceUnderscore(String s) {
         return s.replace(' ','_');
       %>

Originally posted by: nadeem.aboobaker.bea.com
"Walter Harley" <[email protected]> wrote in message
news:f2jet7$na1$[email protected]..
> "Nadeem Aboobaker" <[email protected]> wrote in message
> news:f2j2au$fi6$[email protected]..
>> Hello all,
>>
>> I am having issues creating a plugin as a JAR file, where the plugin
>> contains a nested JAR file.
>
>
> Hey, Nadeem.
>
> Yes, there are a lot of problems with trying to use nested jars in (and
> out of) Eclipse. You can look at
> https://bugs.eclipse.org/bugs/show_bug.cgi?id=145001 as a sort of
> "umbrella" bug report that mentions some of the issues and refers to other
> bugs. There is more than one limitation at work, so describing the issues
> succinctly is difficult. As you noticed in the posting from a year ago,
> the only way to make it work really smoothly is to get rid of the nested
> jars by expanding them (and even then, there are issues with nested .class
> files!).
>
> If it is at all possible to convert the nested .jar into a separate
> plug-in (by adding an OSGi-compliant MANIFEST.MF) and make your primary
> plug-in depend on it, instead of trying to nest the jar within your
> primary plug-in, that will be your best and most "Eclipse-friendly"
> answer.
>
> Feel free to contact me offline or here on the newsgroup if needed.
>
> -walter
Walter, thanks for the reply. Converting the nested .jar into a sepearate
plug-in isn't possible for my case. I checked out the Bug report, and also
the referenced bugs and Wiki page, it was interesting to read all the
issues. :) In any case, I know that deploying the plugin as a directory
instead of a jar works, so I will just go with that approach.
- Nadeem

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

LR 2.1 - Importing catalog sees 'Unknown Error' and fails.

Anybody else seen this dialog box?
'Could not import catalog due to unknown error'
This is happening in LR 2.1. First catalog import attempt. I've had no issues previously.
Upon importing, LR will go through the whole process as though importing, and then at the end of the progress bar, I get the above dialog box. And nothing's there. The import failed.
Anyone else seen this? Suggestions?
-Sol
(MacBook Pro intel 2.2)

Hey Geoff,
Great to hear from you, as always. :)
Well, there were more un-cataloged images that may have been contributing to the situation. I had created web-rez images for my client within subfolders of the main client folder. Once I synchronized, the images were added. Unfortunately, I'm still getting the error message at the end of my import. Now, the weird thing is, if I import the LR catalog only, it disappears after the error message. But, if I tell the import to include the 'Digital Negatives', which includes all the session files (RAW,PSD, jpegs), after the import and then the error box, everything seems to be there and actually looks fine. At least as far as I can tell. I can see the all the files, the ratings, the keywords, etc. A little un-nerving though to say the least. I'm afraid to dump my original catalog and folders.
FYI, what's going on is that I work on my current client sessions (including all related files) off of my MacBook Pro as my 'Current' catalog. I then have my main LR Catalog (all other images) on a back-up RAID drive. So I'm trying to export from the MBP, over to the back-up RAID LR Catalog.
Again, the 'Export' seems to go fine. Not sure what's going on here.
Thanks for your help and input.

PLEASE HELP! Server execution error

Good day everybody.
Long story short, I had afew adwares in my pc and i did many things to remove them. I ended up with installservices64 error when starting up and sever execution error when RIGHT CLICK screen resolution or personalize. I also cant open PC settings from start
menu (windows 8). I have many important data on my pc and would only like to fix this issue. i ve read other threads and seem like an registry error. UNLIKE other people, i have no issue with WMP or running apps. PLEASE HELP!

Hi Zarni,
Thank you for posting this issue on the TechNet community forums.
From the description I understand that you recently removed certain adware from your computer but are now facing an installservices64 error when starting up. This could be caused by the key Windows installer service, InstallServices64.msi file no longer
being present on your computer.
You could try using the Microsoft Fix-it tool: http://support.microsoft.com/mats/program_install_and_uninstall/en-us

SQL Server Import and Export Wizard Issue

i am trying to export SQL data into excel to send out weekly reports. I have created a view and a SQL account has access to this view; however, I am unable to successfully export the data. In preview I see all of the data yet it fails on the
Pre-execute with the below. It creates the excel file with just the header. I am using SQL 2014 and loaded the 64 bit AccessDatabaseengine. I am selecting excel 2007. Any ideas welcome.
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
(SQL Server Import and Export Wizard)
Error 0xc02020e8: Data Flow Task 1: Opening a rowset for "WeeklyList" failed. Check that the object exists in the database.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task 1: Destination - WeeklyList failed the pre-execute phase and returned error code 0xC02020E8.
(SQL Server Import and Export Wizard)

Hi astro,
Please ensure that you haven’t renamed or moved the destination excel file during the exporting process. Also make sure that “Create destination table” option is checked as below screenshot and the SQL statement is correct.
For more details about using SQL Server Import/Export Wizard to export data from a SQL Server database to an Excel spreadsheet, please review the below blog.
http://www.mssqltips.com/sqlservertutorial/202/simple-way-to-export-data-from-sql-server/
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Error XPRA Execution Error when importing SAPKB620432 to SAPKB62046

Hi
I am uploading the basis patch in Queue of 42 to 46 and i stuck at error on XPRA_Execution step
Log file SAPRB62043.GD1 as follow
Execution of programs after import (XPRA)
Transport request___: SAPKB62043
System______________: GD1
tp path             : tp
Version and Release: 340.16.31 640
Post-import methods for change/transport request: SAPKB62043
    on the application server: sapgind01
Follow-up action AFTER_IMP_O2_TAGLIB for WTAG L started at 20070524193314
Follow-up action AFTER_IMP_O2_TAGLIB for WTAG L ended at 20070524193314
Follow-up action AFTER_IMP_SXSD for SXSD L started at 20070524193314
Program terminated (job: RDDEXECL, no.: 19311701)
    See job log
Execution of programs after import (XPRA)
End date and time : 20070524193323
Ended with return code: ===> 12 <===
Job log of RDDEXECl is as follow
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server sapgind01 were synchronized
ABAP/4 processor: LOAD_TYPEPOOL_VERSION_MISMATCH
Job cancelled
SPAM : Action log queue is
   Import phase 'XPRA_EXECUTION' (25.05.2007, 10:45:58)
   Error during executing the tp command 'tp XPA ALL GD1 ...'
   tp return code: '0012' , tp message: 'A tool used by tp aborted' , tp output:
     This is tp version 340.16.31 (release 640, unicode enabled)
     Warning: Parameter DBHOST is no longer used.
     Warning: Parameter DBLIBPATH is no longer used.
     Warning: Parameter DBNAME is no longer used.
     Warning: Parameter DBSWPATH is no longer used.
     standard output from tp and from tools called by tp:
   Details of the error situation can also be found in the import logs
   Abort the import due to an error situation (25.05.2007, 10:47:14)
My SPAM version is 6.20/0023 its latest
its very urgent can any one help me to solve this issue
for contact me mail on [email protected]
Thanks in Advance
Vishal Kalekar

Hi,
I solved this problem after implementing
Note 1083886 - Method IF_FDT_EXPRESSION~IS_GENERATING is not implemented.
is thsi dosent work try restarting the queue again.
Kind regards,
Vamsi

Xsl:import and xsl:call-template errors for xslt in mediator (ORAMED-03601)

Hello,
I decided for performance issues with bpel execution to use a mediator instead.
In my requester i have a mediator that justs recieves an xml message, uses an xsl transformation (version 2) on that message and then sends it to the EBS.
The xsl file that's works correctly when used in a bpel process has both <xsl:import..../>and <xsl:call_template.../> tags.
When i tried and used the same xsl in the mediator i get an ORAMED-03601 error:
ORAMED-03601:[Invalid transformer configuration]Unable to create transformer. It could be because of transformation file or configuration issues. Reason : "xsl/Xform_PriceListListABMReqMsg_to_PriceListEBMReqMsg.xsl"Possible Fix:Check log file for any exceptions and contact Oracle Support Services for further help
It works correctly again if i comment/remove all the imports and call-template and incorporate them in the xsl file itself.
Do anyone know if there are some limitations using xsl in a mediator instead of a bpel?

Hi,
I have a problem with call-template. I have passed
sed some parameter with call-template tag and used
that parameter in the conditional check tag <xsl:if>
i am getting the error. Can any body tell how to use
this? I actuall want to dynamically pass the tag name
as the parameter and check the attribute value of the
tag passed in the if condition and then i want to
person some action. How can i do it?
Here is the call-template code:
<xsl:call-template name="selected-unselected">
<xsl:with-param
ram name="currentTag">motor-carrier</xsl:with-param>
</xsl:call-template>
Here is the template definition:
<xsl:template name="selected-unselected">
<xsl:param
m name="currentTag">Quick-Quote</xsl:param>
     <xsl:if test="./{$currentTag}/@selected='true'">
          <xsl:text>checked</xsl:text>
     </xsl:if>
     <xsl:if test="./{$currentTag}/@selected='false'">
          <xsl:text>Unchecked</xsl:text>
     </xsl:if>
</xsl:template>
Here is the sample xml code:
<motor-carrier selected="true"/>
<motor-truck selected="false"/>
<sched-mobile-equip selected="false"/>
Here instead of writing the condition check for every
tag i want to write it once and dynamically pass the
tag name as parameter to the template. If the
attribute of the tag has value true then one message
should be displayed otherwise a different message
should be displayed.try this:
<xsl:template name="selected-unselected">
     <xsl:paramm name="currentTag">Quick-Quote</xsl:param>
     <xsl:if test="./*[name()=$currentTag]/@selected='true'">
          <xsl:text>checked</xsl:text>
     </xsl:if>
     <xsl:if test="./*[name()=$currentTag]/@selected='false'">
          <xsl:text>Unchecked</xsl:text>
     </xsl:if>
</xsl:template>

Imports and Formatting Errors

I have imported many scripts into Adobe Story. I love this product. But all the scripts that I import from Final Draft are imported with a ridiculous amount of errors in formatting. I have to go over every page and nearly every paragraph and re-tag it to its correct type. There are even times that there are sections of text missing.One particular script was so bad it was simpler to re-type it then it was to correct it. Is there something that I can do on the export from Final Draft that will at least minimize these errors? It is really not as effective a tool if it can't play nice with other formatting programs. HELP!! PLEASE!!!!

While working with the automatic bean variable and
method generation I noticed the following:
1) The instance variables are being mixed in with the
methods. This makes for hard to read classes in which
you must search all over to find instance variable
declarations which should be at the top of the class.Here is an alternative way to add bean properties that results in the declarations at the top and the methods at the bottom.
Open the source in the IDE.
Add the declarations at the top, such as
privatte int anInt;
private String aString;
When you have added all your instance variables, right-click in the source and choose Refactor > Encapsulate Fields from the pop-up menu. Then select the checkboxes of the fields that you want getters and setters for.
Click Next, and click Do Refactoring. The IDE puts the methods at the bottom.
>
2) When creating a property on a bean of type
java.util.Map I noticed that the import was not
created, I had to go in and add it myself
afterwards.
After you add the property, right-click in the source and choose Fix Imports from the pop-up menu. It will add all the import statements that the file needs.

Importing .MOV files from PC and getting "generic error" msgs... help.

Importing .mov files which I downloaded from my iPhone onto my PC (so getting them from file folder, not directly from iPhone). However, getting "importer is reporting generic error" message with a list of video files that didn't get imported. Some are importing, though, and showing up on the timeline. Downloaded a whole bunch at a time and thought it was the problem. Then just tried one that had the error to test and that one wouldn't either, even by itself.
These are MOV files from iPhone 4 recorded with "stock" camera program on phone. Using Premiere Elements 11.
Please help.

Welcome to the forum.
Along with Steve's questions, I have one more:
Did your iPhone shoot with a Variable Frame Rate?
That is common with many of the phone cameras, and especially the iPhones. You can run your file through MediaInfo (for PC), or Media Inspector (for Mac), and then report the FPS (Frames Per Second). If it is constant, it should Import fine. If it is variable, then you might have to convert that to a Fixed Frame Rate. One method is to use Apple's QuickTime Pro (a US $30 upgrade/unlock), and just Import the file into QT Pro, then Export to the same format, but with a Fixed Frames Per Second.
Good luck, and please let us know a bit more.
Hunt

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."

When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?

Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W.

Import and Method Execution Error (8)

Similar Messages

Maybe you are looking for