Import Aperture 3.1 project into 3.2 library

I use a Macbook Air 1.86 Ghz Core 2 with Mac OsX 10.5.8 with Aperture 3.1 to stock and edit my travel libraries.
I export the travel projecs to an external harddrive, to import the projects into Aperture 3.2 on my Macbook Pro 17"..
But the older 3.1 projects can not be imported into the 3.2 version...
Last time i used a work around, .. installed an old 3.1 version on my macbook Pro, imported the project in a new library, updated to 3.2 and copied the library to my master library.. Quite tedious if you have to repeat this for every trip..
The 3.1 version on the macbook air can not be upgraded to 3.2 since it does not run on Mac Osx 10.5..
Is there a faster way to get my 3.1 project intot Aperture 3.2...
it seems logic to me that an update of the project is offered as soon as you try to open it in a newer version.. of aperture ?
Thanks,
Danny Stevens

I export the travel projecs to an external harddrive, to import the projects into Aperture 3.2 on my Macbook Pro 17"..
Hi Danny,
Does it not work, to upgrade your exported 3.1. project to AP 3.2 by opening it in Aperture 3.2?
I'd try the following wotkflow:
export the travel projects to an external harddrive,
connect the drive to your Macbook Pro 17"
open the 3.1 projects with Aperture 3.2 and upgrade them to AP 3.2
then import the upgraded projects into the 3.2. library on your MBP 17"
Regards
Léonie

Similar Messages

  • Problems importing Aperture 2 archived projects into Aperture 3

    Any suggestions please I want to import some archived projects from aperture 2 back into Aperture 3 from an external dive the projects are in folders named xxxx.approject. Aperture 3 sees the folders but the images are contained in separate folders within so for a project that has 600 images in it imports them all in individual folders which is a complete nightmare to sort out. Am I doing something wrong here or is this the way Aperture 2 exported projects? Any help would be appreciated.

    It should work. Just try it.
    -Allen

  • Importing Aperture 2.1 projects into Aperture 3

    I have several Aperture 2.1 projects on my MacBook Air that have already been exported from 2.1. Is it possible to import these directly into Aperture 3 on my desktop or do I have to upgrade the Aperture 2.1 on the MacBook Air first and then re-export the projects?
    Joel

    It should work. Just try it.
    -Allen

  • I imported a COMPLETED book project into Aperture 3, only to discover that  the resolution of all the photos has been reduced to totally unacceptable levels

    I imported a COMPLETED book project into Aperture 3, only to discover that  the resolution of all the photos has been reduced to totally unacceptable levels.  Any easy solution?
    Steps:
    1. I finished an Aperture 2 (Two) book project and tried to submit it to Apple for printing. At that point I learned (belatedly, obviously) that Apple no longer accepts books from Aperture 2. I don't know how I would have known to even ask if Aperture 2 had been sunsetted as far as book projects go.
    2. So I tried to download Aperture 3 ($79.99), only to be told that I couldn't download Aperture 3.5.1 because I was still running OSX 10.8.x. So I read current reviews for OSX 10.9.x, and ...
    3. Downloaded and installed the current operating system (about a 3-hours process for me).  OSX 10.9.2, here we are!
    4. Then I returned to the Apple Store, found, and purchased Aperture 3.  [For safety's sake, it would sure be nice to have a .dmg file I could copy and file away.  I lost a perfectly legal and good copy of Adobe's Photoshop Elements 3 years ago because I wasn't smart enough to make a safety copy, and when my iMac crashed (fried electronic components), I was left with a copy of the software that wouldn't run, and couldn't be verified as legit.]
    5. When Aperture 3 finished installing, I found and imported my COMPLETED Aperture 2 book project, which import seemed to proceed nominally -- the right number of pages, the right content on those pages, that sort of thing -- until I started looking more carefully at the pictures themselves.  All of them, about 300 of them, have been imported into an Aperture 3 book project in such a reduced resolution that they are fuzzy at the size the book will be printed.  Screen-capture of just one example (at 100% viewer setting):
    I don't know what to do at this point to correct the problem, short of going through the entire book project, copy the custom captions (since those go away when you "delete" photo content), delete the photo, re-insert the photo, and paste back the custom caption.  Lather, rinse, repeat - ~300 times!  An estimated 2-3 hours of additional work.
    Or does anyone in this community know either (1) that I did something wrong in the Aperture 2-to-Aperture 3 import (I don't recall being offered any options or choices in the process); or (2) that there is a wholesale one-step solution to my problem?
    BTW, I tried to edit my "Product" info, but OSX 10.9.x is not in the pick list.  I am running OSX 10.9.2
    <Re-Titled By Host>

    Frank, thanks for your note.  I wrote "COMPLETED" because I had gone to a lot of effort to get the content of the book precisely as I wanted it. I would fully expect to see my level of effort and care matched by functional competence in Aperture 3 to render the book the way I created it.  Too much to ask?
    And yes, I upgraded the Aperture 2 Library first.  [Not ALL my tens of 000s of pix, because I use Lightroom selectively for photo editing. But Yes to the Aperture 2 Library.]  That step took a number of minutes, but seemed to work fine (no error messages of any kind).
    Then I opened the existing book project in Aperture 3, which followed some "magic-box" process that took a minute or so.  As I said, when that step was done, by all appearances the book was ready to submit for printing - until I examined the photos a little more closely.  You did see the blurry example I included, didn't you? That is what each and every photo looks like.
    Text-box content appears to have been rendered pertectly, for the record (including captions).
    So, ... is this result something you have heard of before?  Do you know of a one-step solution?  Or am I looking at an extended picture-by-picture fix?

  • Arbitrary data param not importing from Premiere Pro project into After Effects.

    Hi,
    I have an AE SDK plugin effect that works in Premiere Pro and After Effects... the effect has a bunch of standard parameters and one Arbitrary Data parameter.
    I believe that the Arbitrary data parameter is implemented correctly, and I have implemented all of the cases for PF_Cmd_ARBITRARY_CALLBACK...
    PF_Arbitrary_NEW_FUNC
    PF_Arbitrary_DISPOSE_FUNC
    PF_Arbitrary_COPY_FUNC
    PF_Arbitrary_FLAT_SIZE_FUNC
    PF_Arbitrary_FLAT_SIZE_FUNC
    PF_Arbitrary_FLATTEN_FUNC
    PF_Arbitrary_UNFLATTEN_FUNC
    PF_Arbitrary_INTERP_FUNC
    PF_Arbitrary_COMPARE_FUNC
    PF_Arbitrary_PRINT_SIZE_FUNC
    PF_Arbitrary_PRINT_FUNC
    PF_Arbitrary_SCAN_FUNC
    The only issue I have found, is that when importing a Premiere Pro project into After Effects with the "Import -> Adobe Premiere Pro Project" option, the value in the Arbitrary Data
    parameter is always the default. There is no problem saving or re-opening projects within AE or PP... and there are no problems with cutting and pasting instances of the effect.
    Importing a Premiere Pro project into After Effects using the Dynamic Link works correctly... the Arbitrary data is imported.
    Thanks.

    Some kind of answer would be awesome... there are Adobe staff members on here right?

  • Import a Premiere CS3 Project into Premiere Elements 7.

    Is it possible (or NOT) import a Premiere CS3 Project into Premiere Elements 7?
    Thanks a lot for any help.

    It is only possible to open some PrE Projects into the right version of PrPro, but will not work the other way around. The error message that you will get is "This Project was created in Adobe PrPro and you need to open it in that program."
    Even going the PrE to PrPro route is filled with potholes. I can open some PrE 4 Projects in PrPro 2.0, but not all - depends on what was done. Later versions of PrE will not open in PrPro 2.0, but some have opened in CS3 and CS4, though much can keep one from being able to do that.
    Sorry for the bad news,
    Hunt

  • How do you import final cut pro projects into imovie? (like you create a pr

    How do you import final cut pro projects into imovie?
    (like you create a project in final cut but i want to save it, and import it into imovie..

    Hi -
    Mr. Ross is right, there is no direct way to export your project with all it's elements into iMovie.
    If, on the other hand, you have a completed sequence in FCP that you want to export as a finished element, then import into iMovie for you to re-edit or apply titles, music, etc. you would:
    In FCP:
    Click on the Sequence Icon you want to export in your browser.
    Go to the menu File > Export > Quicktime Movie. Give your movie a name a navigate to where you want it stored. Make sure you choose Settings: Current Settings and have the Make Movie Self Contained checked. Click Save.
    Close FCP and open iMovie.
    In iMovie:
    Go to the menu File > Import > Movies and navigate to the movie you just exported from FCP. Choose if you want your movie imported in it's original size, etc.
    Click Import. Your movie will be imported into iMovie.
    Note that using this method only gives you only the elements that made up your FCP sequence, so this may not give you the flexibility you need.
    Hope this helps.
    MtD

  • How do i import an iMovie 08 project into Imovie 11?

    How do i import an iMovie 08 project into Imovie 11?

    I don't still have iMovie 08, but this method works in iMovie 11.
    Go to...Home, movies, iMovie projects, find the project you want and right click and click "show package contents".
    That will show a movie file and some other files. Drag the file to the desktop and rename it .mp4.
    then go to iMovie, import, navigate to the mp4 file on your desktop and it will let you import to the events section and then you can add it to your movie.
    Takes a lot longer to describe than to do. The quality seems to be preserved though I don't know if titles etc get transferred over, kind of doubt it.
    Hugh

  • Trouble Import Flash Builder 4 project into Flash Builder 4.5

    Hi,
    I have quite a lot of Flash Builder 4 Air project which I would like to convert all of them into Flash Builder 4.5 project. However, after I tried to import it into 4.5, the project got error and saying that "application descriptor not found".
    I am posting it here because I believe it is due to improper import of the air project into 4.5. Flash Builder 4.5 should be intelligent enough to solve the problem when converting the project. Hope there will be a fix for it soon
    Btw, how can I manually solve this problem so that I can get all my previous projects run on 4.5? Thanks.

    Hi Yue,
    I'm sorry you're running into problems with Flash Builder.  Would you mind reposting this over on the Flash Builder forums?  You'll probably have better luck over there.
    Thanks,
    Chris

  • Its possible import a After effect projects into Motion 5?

    hi guys
    its possible import a After effect projects into Motion 5?

    No you can't do that. Unless AfterEffects can export some sort of XML, even then I doubt everything would be translated. One way is to export layers
    you know won't change as movies and import them into Motion. Then just recreate the layers that you need to change.
    a

  • Import package from one project into another

    Hello everyone,
    I have some projects.
    An enterprise and war project created in netbeans.
    I would like to use some files from one project to another. when I import
    the package I get the error-
    'package x does not exist'
    I have added the package to the project but I still get the error.
    I have also added the project to import to my glasspath but still.
    E.g.
    set classpath
    .;c:\enterpriseA;
    My next idea is to create a war project into my enterprise project and copy the files
    from the war project into it in order to use it. But I'm sure there is a better way.
    THanking you in advance.
    eve
    Edited by: evepokua on Nov 22, 2009 1:44 PM

    One mistake I keep making is that I don't add the package to the
    Dependencies of the plugin I'm writing. You have to go to plugin.xml,
    and add the package you depend on to the Dependencies section. Maybe you
    didn't do this?
    Michael
    nasti wrote:
    > Hello everybody!
    > I am new user of osgi and eclipse. I tried to do some of Oscar examples
    > but I had some problems. Namely, the problem in import of package from
    > one project into another in Eclipse.
    > I add first project to the Build Path of the second one.
    > I add to the first project manifest line: Export-Package example2.service.
    > I add to the second project manifest line: Import-Package example2.service.
    > But when I tried to execute these bundles the
    > java.lang.NoClassDefFoundError was occurred. May be you will help me
    > with this problem.
    > Thanks....
    >
    >

  • Can't find chart.swc components when importing a flash catalyst project into flash builder.

    How do i import chart chart.swc compnents into the flash project?

    When I access the webpage in Chrome, then access the developer tools, I get this error
    Uncaught ReferenceError: swfobject is not defined
    I think this might be the source of your issue.
    Chris

  • Importing finished Premier Pro Project into Encore

    I have completed about 4-5 projects in encore since loading my software CS4.  I am very new to this game.  When I go to dynamic link to get my project into encore to get it to a DVD it goes just fine and then it freezes at 50% when importing the timeline into encore.  Is there a simple fix for this.  My pjogect is 1 hr and 40 min long if that matters.  Any help anyone can offer would be greatly appreciated.  Thank you.

    I'm having the same issue. Adobe Dynamic Link does NOT work in Creative Cloud. And I cannot figure out a work around. I'm trying to have text fade in after a video into, then have that text become a button. I'm beginning to think it isn't possible...

  • Help importing Workshop 8.1 project into Workshop 10

    Hi,
    I'm trying to import a workshop 8.1.4 project into workshop 10 using the "Import > Other > Workshop 8.1 Application " wizard.
    I select "myapp.work".
    I then click on "Target Runtime > New" button to make sure my project is pointing to the 8.1 runtime and not the 10.1 runtime.
    From the "New Server Runtime" wizard, I select "Weblogic 8.1", and then click on "next". I then select the 8.1 Application Server Directory, in my case it's "e:\bea814\weblogic81"
    I then click on "Finish",
    Now the problem:
    I get brought back to the "Application Import" wizard, but the 8.1 Runtime is still not installed. I dont get an error message, and the eclipse .log file is empty...
    PLEASE HELP.
    Thanks.

    Workshop 10.0 only supports WLS 10.0. Workshop 10.1 supports 8.1, 9.0, 9.1, 9.2 and 10.0, but support for 8.1, 9.0 and 9.1 is limited to standard J2EE technologies. Controls, NetUI, EjbGen, WLS Web Services, etc. are only supported on 9.2 and 10.0.
    If you have a Workshop 8.1 app that uses any of above features, then you would have to migrate to WLS 9.2 or 10.0 in order to use Workshop 10.1 with your application. The import process will upgrade your project metadata and make changes to your source code such that it will work on the newer version of WLS.
    If you have a Workshop 8.1 app that only uses straight J2EE technology, then it would be possible for you to move to Workshop 10.1 while continuing to target WLS 8.1. The catch is that you have to do a bit more work manually to make that happen. There is no upgrade wizard for this case, but you can create new projects in Workshop 10.1 that target WLS 8.1 and copy your existing Workshop 8.1 source files into the new projects.
    Hope this clarifies what is and what isn't possible.
    - Konstantin

  • Import old FC Pro project into current project library

    I have some old projects in a folder and I'd like to import them into my current library but FC won't let me. Says I have to open the project in Final Cut, buit I can't even do that.
    Help?

    How old is old? Are they created by versions earlier than FCP X?
    If so you will need to purchase 7toX, which is available in the App Store…$10 I believe…and it works.
    Russ

Maybe you are looking for