Import application seems not to work
I have a workspace on the apex.oracle.com site, but after importing an application and installing it over an existing application ID in my workspace, I get the following message: installing application [] [] [] [] [] ... and then... Application not available for edit. Afterwards it shows that my application has been updated recently. Is there a problem? If so, what do I have to do>
The apex.oracle.com site is APEX 3.1 and I use APEX 3.0 at my remote site.
It appears that you installed this application with a build status of "Run Only". Try again and specify "Run and Build".
Scott
Similar Messages
-
The function AirDrop on my Mac BookAir seems not to work, not detect my iPad. How to fix this?
AirDrop on iOS devices (iPads, iPhones, iPod touches) can only AirDrop things with other iOS devices. AirDrop on Mac can only AirDrop things with other Macs.
I hope this solves your question.
Austin -
I downloaded iMovie11 but it seems not to work with iDVD6. Do I need to down load the latest IDVD?
Where do I download it from?
You need to use iDVD 09 or iDVD 11. These are only available on disk.
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
If you live in a state where Amazon collects sales tax you may prefer the link below.
http://dealmac.com/lw/artclick.html?1,527850,1872219 -
My select select statement seems not to work...
Hello experts,
I am having trouble with my select statement below. Here is what I need to do:
1. loop at itab it_equz.
2. get single asset number(ANLNR) and description(SHTXT) from table ITOB where EQUNR =_equz-equnr.
3. get single asset number(ANLN1), asset subclass(ANLN2 and subnumber(ORD42 from table ANLA where its asset(anln1) equals to the asset fetched by ITOB. (no. 2 step) and DEAKT eq '00000000'
4. Now, I would get all fields(select single) in table ANLC where ANLN1 equals to asset fetched by ANLA and ANLN2 equals to ANLN2 fetched by ANLA and AFABE eq '01'.
5.endloop.
Now, the problem is that I can't seem to get the right values in table ANLC. Now, my boss said that the values that I must get in ANLC must not be deactivated. So I did that by getting the required fields(no 3 step) in table ANLA where its DEAKT is equal to '00000000'.
Now, my select statement for ANLC seems not to work properly since I have the proper where conditions. Anyway, below is my select statement that I did:
LOOP AT it_equz. "no 1 step
SELECT SINGLE anlnr shtxt FROM itob "no 2 step
INTO (it_itob-anlnr, it_itob-shtxt)
WHERE equnr = it_equz_dum1-hequi.
MOVE it_itob-anlnr TO it_finaltab-asset_dum.
MOVE it_itob-anlnr TO it_finaltab-asset.
MOVE it_itob-shtxt TO it_finaltab-description.
SELECT SINGLE bukrs anln1 anln2 ord42 "no 3 step
FROM anla
INTO (it_anla-bukrs, it_anla-anln1, it_anla-anln2,
it_anla-ord42)
WHERE anln1 = it_finaltab-asset
AND bukrs IN r_iwerk
AND deakt = '00000000'.
MOVE it_anla-ord42 TO it_finaltab-asset_sub.
WRITE it_finaltab-asset TO v_asset.
CONCATENATE v_asset '-' it_anla-anln2
INTO it_finaltab-asset_subnum.
SELECT SINGLE bukrs anln1 gjahr afabe knafa kansw "no 4 step
answl kaafa nafal aafav aafag
nafap aafap nafav nafag FROM anlc
INTO (it_anlc-bukrs, it_anlc-anln1, it_anlc-gjahr,
it_anlc-afabe, it_anlc-knafa, it_anlc-kansw,
it_anlc-answl, it_anlc-kaafa, it_anlc-nafal,
it_anlc-aafav, it_anlc-aafag, it_anlc-nafap,
it_anlc-aafap, it_anlc-nafav, it_anlc-nafag)
WHERE anln1 EQ it_finaltab-asset
AND anln2 EQ it_anla-anln2
AND bukrs EQ it_anla-bukrs
AND afabe EQ '01'.
it_finaltab-accq_cost = it_anlc-kansw + it_anlc-answl.
IF p_posdep = 'X'.
it_finaltab-acc_dep = it_anlc-knafa +
it_anlc-nafav +
it_anlc-nafag +
it_anlc-kaafa +
it_anlc-aafav +
it_anlc-aafag.
ELSE.
it_finaltab-acc_dep = it_anlc-knafa +
it_anlc-nafav +
it_anlc-nafag +
it_anlc-kaafa +
it_anlc-aafav +
it_anlc-aafag +
it_anlc-nafap +
it_anlc-aafap.
ENDIF.
APPEND it_finaltab. CLEAR it_finaltab.
APPEND it_equz_dum2. CLEAR it_equz_dum2.
CLEAR it_itob. CLEAR it_anla. CLEAR it_anlc.
endloop.Hi,
Please avoid selection in loop. it will lead to major performance issue.
avoid move statements ; instead use assignment.
1st :- select the entire data into internal table
eg:-
SELECT anlnr shtxt FROM itob
INTO table it_itob
for all entries in it_equz
WHERE equnr = it_equz-hequi.
1st select
2nd select.
2nd :- now loop on ur internal table to get the desired result.
it is good to work with internal table rather than select statements in loop.
Regards -
Can the new garageband open files from the previous garageband? in my case it seems not to work and I would like to know if it is possible at all...
No.
I find it extremely frustrating that Apple does not care for such an obvious bug affecting one of the basic funcionalities of AirPlay. Unless, of course, if there's something I don't know - but I've done some research and it seems that plenty of people have same issue and no solution is settled. -
Is it possible to zoom in photos when using airplay? It seems not to work at all. I can only zoom in if i use mirroring and even then i have to reconnect mirroring each time I chage an albumor even go from the photo to the album level.
No.
I find it extremely frustrating that Apple does not care for such an obvious bug affecting one of the basic funcionalities of AirPlay. Unless, of course, if there's something I don't know - but I've done some research and it seems that plenty of people have same issue and no solution is settled. -
dropped my iphone and now home button doesnt work and will not charge.lower third of it seems not to work.i assume it's had it.what will i lose off it?
rbrook0113 wrote:
I know any device could malfucntion but if it costs $40,000 to buy you could at least warn someone of the possible malfuctions. It makes the company look bad when a large amount of your devices act up and you "cant help them" if they dont pay extra. Im just saying.
Sorry but that makes no sense at all. How can they possible know what things will possible malfunction on your device? Anything that they think is highly likely to malfunction they would have addressed in desiging and manufacturing the device in the first place, during development. They've made and sold many millions of iPhones, and many of them have lasted years without any problems (I know, I've owned such iPhones personally). So how could they possible know if yours was any more likely to develop any issues than any of those other trouble free ones?
It's hardware - stuff sometimes breaks randomly. No amout of money ever guarantees or even reduces the likelyhood of random product failures.
Take it in to Apple and see about getting it fixed. -
Import application is not working in 4.1
I am trying to import my application from one apex.oracle.com to my own database and I am getting the following error.
Error ERR-1029 Unable to store session info. session=3131715383148183 item=40006855470898
ORA-02091: transaction rolled back ORA-02291: integrity constraint (APEX_040100.WWV_FLOW_PAGE_DA_A_AR_FK) violated - parent key not found
the problem started after I created a ajex DA which was associated with page item.
i remove the DA export and than import same result
added again the DA export and than import same result
try to find out the item name from APEX_040100.wwv_flow_page_da_actions from the apex.oracle.com return with error no table or view exist
could someone instruct how to find the item or fix this issue
My database is 4.1, Oracle 11g R2.Hi pkanda,
I think I found the solution: BUG in Export causing ORA-02291 (WWV_FLOW_PAGE_DA_A_AR_FK) - Reason
Maybe you could try it?
Best regards,
Sabine -
Importing application while people are working on HTMLDB
I do my development on a test box, and then import the application to my production box. I do this after hours, when no one is on the database. Just wondering if it is possible to do the import live (while users are actively working on the DB). I have not tried this (for obvious reasons). Just wanted to know.
Thanks,
ScottSee
upgrading app while in-use (24x7) -
I've long noted that the highlight feature in ibooks is clunky and fairly limited in it's note-taking features, but the last two books I've read I've had trouble getting the highlight feature to work at all. I click and drag over text and nothing happens. I try with command depressed and nothing happens. If I double click a bunch it will eventually highlight one word, but nothing more. What gives?
Also, not to be snarky, but why can't I seem to find a button that would read text to speach for me? How do blind people use this service, or illiterate, or dyslexic, or people like myself who can learn far more from hearing then from reading.
And why does the text of a book often render so that it's haf cut off of the page?There is a button for speech within the iBooks menu. Edit > Speech. You might be better off buying Audiobooks. You can get them from the iTunes Store or Audible.com
-
Smart folders seems not to work with star rating. Is there a fix?
I Rate photos with a five star rating either on iPhoto or Adobe Bridge CS5. When I create a smart folder setting the search attribute to "Rating equals 5" nothing appears on the search.
Sorry,
I think I misunderstood your question. You were talking about smart folders in the Finder and not about smart albums in iPhoto, right? "Rating equals 5" does not work on any of my machines, neither in Snow leopard nor in Lion. The problem seems to be how to represent the rating in the search string. If I search for "Rating is not 5" the smart folder contains plenty of pictures, also those with a rating of five. Does anyone know how the rating is coded to be used in a search string in the Finder? -
AUS auto populate device seems not to work.
I'm running CSM 4.0.1 and followed the instructions on how to use CSM to update an ASA5540 filewall through AUS. I created a policy in CSM with the AUS IP address and credentials and chose 'Device' to deploy to.
On page 1-3 of "Getting Started with AUS" it states: When you use Security Manager to deploy configurations to a device through AUS, the device is automatically added to the AUS inventory after the device successfully contacts AUS and retrieces the configuration. This is the normal method for adding devices."
The AUS fails the attempt with this error message:
CALLHOME-DB-DEVICE_NOT_FOUND: Record for device with ID Remote-ASA-1 could not be found. Action: Please ensure the device was added to the AUS and that the device config contains the correct device ID.
And the ASA device (8.4.1) with debug turned on, displays this error msg:
Remote-ASA-1# Auto-update client: Sent DeviceDetails to /autoupdate/AutoUpdateServlet of server 164.72.44.162
Auto-update client: Processing UpdateInfo from server 164.72.44.162
Auto-update client: Failed to contact: https://164.72.44.162/autoupdate/AutoUpdateServlet, reason: ErrorList error code: CALLHOME-DB-DEVICE_NOT_FOUND, description: Record for device with ID Remote-ASA-1 could not be found.
It's complaining the the device ID is not found. But the hostname of the ASA is the same as the device ID in CSM.
Is there something I'm missing or not doing for this to work?Hello Jeff,
there are few things to make the AUS work, let's try to list it and make sure we have everything in place.
1- we need to configure the device for AUS. Let do it via CSM:
in the Device View select your firewall and configure your AUS server via
Device Admin ->Server Access->AUS
The ip address will be the same as CSM and credential the same you use to login in the CSM Server
2- deploy to the ASA to make sure it has teh AUS config. The config deployed should look like:
auto-update device-id hostname
auto-update server https://*@/autoupdate/AutoUpdateServlet source
3- make sure that the hostname of the device is THE SAME as the display name in CSM (you can check that by right clicking on the device and click on device properties)
4- we are now ready to setup the AUS server. Right click on the device and select Device Properties. In the Autoupdate section (at the bottom)
complete the fields by putting all the needed info. The server name and ip address should be the same as the CSM (AUS is running on the same server)
and the credentials are the same used to login in the CSM gui and used at point 1
5- Once this is setup, you are ready for the first deployment. It is important to deploy just after because the CSM needs to create the right configuration file on the AUS server. After the first deployment you should be able to see the device listed in the AUS portal (under devices)
Let me know if it worked.
Stefano -
The usb ports on my mac book air seem not to work
So, they do but it seems selective. On my 2008 iMac I would plug in my thumb drive and it was near instant but on my MBA ill plug it in on the right side and it rarely works but my mouse works fine there. On the left side it takes a few seconds then it works but it seems longer than my older macs. This computer isn't old about a week old, so ideas. Its not a mounting issue it dosen't show up in the disk utility, until it works.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
"Resetting SMC on portables with a battery you should not remove on your own".
You can return a new Mac within 14 days of purchase.
Return it and get another one.
A new Mac is in warranty for 1 year from the date of purchase.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best. -
Scripts in /etc/profile.d seem not to work under certain circumstances
While already logged in, if I open up a terminal and run a script in /etc/profile.d/ to set environment variables, the changes don't seem to take. I can think of two examples:
1) Turning on KDE4 desktop integration in openoffice. I edited /etc/profile.d/openoffice.sh and changed OOO_FORCE_DESKTOP=KDE4, but when I ran the script I got an "export: command not found" error.
2) When replacing Sun Java with OpenJDK in order to compile and use 389-console from the AUR, I got caught up on one of the dependencies, ldapjdk (also from the AUR). The PKGBUILD for this package contains the following block of code:
which ant
if [ $? -eq 1 ]; then
. /etc/profile.d/apache-ant.sh
fi
ant dist
In theory this should work, as /etc/profile.d/apache-ant.sh contains the following two lines:
export ANT_HOME=/usr/share/java/apache-ant
export PATH=$PATH:$ANT_HOME/bin
However, upon running makepkg I got an error about "ant" not being in my path. To get around this I just edited the PKGBUILD and put the full path to ant, but this shouldn't have been necessary. The original PKGBUILD should have worked. I seem to have something out of whack and I don't quite know what. If anyone could be of assistance, it would be much appreciated.I'm well aware of this. I never said that I started openoffice from the plasma menu. I never even started it. /etc/profile.d/openoffice.sh errored out without setting the environment variable in the current shell session. If it had worked, I would have been able to run openoffice from the terminal to test the new environment variable, which is what I was intending to do in the first place. There's no need to logout to test these sort of changes, they can be done from the terminal.
Your solution also doesn't address the problem I had in example #2, either. makepkg should be able to set environment variables in the current shell session, using the /etc/profile.d script detailed in the example. Running makepkg has nothing to do with my graphical session.
I know that logging out and back in will "fix" the problem, but that's not the point. The point is that a script which should be able to set an environment variable is not working properly.
Last edited by archtaku (2010-08-21 00:58:53) -
All default Apple applications do not start/work and do not open! No Finder
Lately, I got some problems on my Mac Pro 10.5.8, and I thought it might have to do something with the operating system. So I tried to update the system with Pacifist (by choosing to replace all the old files; since by default it just update only if there is any version change). Well it turned out the problem was in hardware, which I resolved but now all the Apple software is not working; the rest all do. Which means, no Mail, iCal, address book, etc (iLife works though). What I see on the dock are just white icon with App logo on it. Even finder icon on the dock has vanished, although I can open finder by clicking anywhere on desktop, and then choosing it from menu.
Can someone please suggest what I need to do? Is it a permissions problem? (I tried repairing all permissions already, did not work!
Do I need to reinstall the whole OS? I wanna avoid that at this stage.Try downloading and running the 10.5.8 combo updater:
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
Failing that, consider an Archive and Install:
http://support.apple.com/kb/HT1710
Good luck!
Maybe you are looking for
-
I was attached by registry doctor and several conduit malware programs. I had the malware removed from my computer. But ever since them thunderbird has been very slow or not resonding at all. l have uninstalled and reinstalled thunderbird twice. The
-
My mac isn't working! Please help!
Hi Guys, hopefully someone here will be able to help me out with a massive problem with my MacBook Pro. The macbook turn on fine, all boots up but then wehn OS X is loaded I cannot do anything, the mousepad and keyboard are unresponsive, the only but
-
IPod Nano 6th Gen Touch Problems
So I have an iPod Nano 6th Gen, and my touch screen is acting weird. It will work and detect my touch, but it will randomly act as if I'm touching it when I'm not, for example I set it to time on wake, then when I wake it I see the clock for a second
-
Someone is sending texts from a different phone
How do I stop someone from sending texts from my number? They've hacked my account. I even changed mu number and said person found me again. Help!
-
I would like to find the object change and to move
Thank you very much, but Sayfaları, tek tek sayfalarını bakacak bu script belgede (3, 5, 7, ...) işlem yok I would like to object all page (height and width of the rectangle is known, the text frame) to move to find and replace The height and width o