Import Automatically turns into Reject clip

Hey everyone,
Whenever I import something into iMovie '08, the whole thing, or sometimes just part of the clip goes directly to the rejected clips. Anyone know why this happens? I have enough disk space and have all the iMovie '08 system requirements.

My .cube file is saved to: C:\Program Files\Adobe\Adobe SpeedGrade CC\Lumetri\LUTs\
Please note: the problem is not present LUTs pre-installed with SpeedGrade. The problem is only present with my LUT from Technicolor.
A history of my LUT:
It was downloaded from: http://www.technicolor.com/en/solutions-services/cinestyle
Using Magic Bullet's LUT Buddy in Premiere Pro (repeated in After Effects) I imported "S-curve_for_CineStyle.mga" then exported to a .cube file
Copied the resulting .cube file into the directory mentioned above
Applied the LUT
It appears fine in SpeedGrade
back in Premiere, the clips with the applied LUT is remains on the "Media Pending" screen or the checkboard, or freezes on the out frame of the previous clip without grading.
I'm starting to panic now, as my deadline is looming.

Similar Messages

Camcorder download does not automatically split into individual clips

I downloaded four DV tapes recorded on my Canon ZR40 (seven years old) DV camcorder.
When downloading two of the four tapes, no individual clips were created; I got one big clip. On the other two tapes, they were broken down into scenes normally.
Am I doing something wrong? (Timecode checkmark is selected)
Can you instruct PRE to automatically break one large clip into individual scenes once it is already on the disk? How?
Thanks

I always use DVdate by Glagla to capture my DV clips. The clips can be named according to shooting time and date, giving two advantages:
1. Clips from several tapes will sort by shooting time in PE media panel.
2. Shooting time and date is visible within PE.
If it works on your tapes forget about capturing with PE.

Multiclips turn into Text clip

Plenty of multiclip bugs plagued 6.0.2, but since upgrading to 6.0.3, here's a ridiculous new one:
1. Make multiclip from three video clips (in-point being slate clap)
2. Add an audio clip to that multiclip (in-point being slate clap)
Ok, so my three cameras are in synch, but the sound is not. The workaround for this part is to hand-drag the audio clip two frames left, then two frames right. Bingo! Everything lines up.
...and then...
When I click to choose a video angle, or try to set an in-point, or touch the clip...
The multiclip disappears from the Viewer, and in the Browser my multiclip magically transforms into a text clip.
This happens regularly, but not on every clip (about every three or four). It slows down the synching/stringout process considerably. Haven't yet noticed anything different between the clips that transform and those that don't.
Ideas would be appreciated...
Thanks!

http://support.apple.com/kb/HT3529
under notes: when imessage is unavailable it will send it as a SMS.

Import of 16:9 PAL Clips to iDVD turn into 3:4

16:9 PAL clips are well edited by fce and exported as quicktime movie are played well as 16:9 by finder. But when i import them to iDVD they will be played as 4:3 ><. Some clips failed, some are working well. If i have found a clip which does not turn into 4:3 ,it may not be changed. For example: Changing the audio-level may cause the same result. It changes into 4:3 when played by iDVD.
Who has got same experiences ? Are there possibilities to avoid this ?

http://www.fcpbook.com/Video9.html

Imported Tape Broken into Too Many Clips

I tape my movies with a Sony Digital 8 camera, model DCR-TRV103, and import them to my MacBook Pro, using iMovie HD 6. This has been working very well. But one recent event I taped, upon importing, started breaking a long clip from the tape into very many short clips in iMovie, most only a few seconds long, with some just a fraction of a second in length. When the number of clips in iMove exceeded 100, I stopped the importing, even though the tape was less than half way through. I have not had this problem either before or after this one particular tape.
The event I taped was a ride on a tourist railroad, so I was bouncing around a lot. Maybe this threw some kind of errors into the tape? I'm grasping at straws here. Viewing the tape, as it imported into iMovie, it looks just fine, with no irregularities apparent, at the same time that dozens of clips are being populated.
I shot another movie after this one, and had no problems importing it into iMovie. But during this taping, the camera was stationary. Importing this one gave only two clips for an entire 55 minute tape.
Any ideas?

I have this problem too. I was able to make the situation a little better by cleaning the video heads with a cleaning tape, but the problem still persists. Now, I am having to work around this problem by turning off the option to "start new clip @ scene break" in the import preferences. I then set the maximum clip length to 1 minute. Then I get a series of 1 minute clips that I can then break into scenes in iMovie. Not an optimal situation.

When I define a variable in BO it automatically turns it into a detail

i have made a user prompt in my report
so the user can input a value that does not exist in universe so i can use it as condition or a filter,
i have done this by using the followiing condition in the query
object = object
or
object = ToPrompt("Give number")
As you can see by the logic this condition will ALWAYS be true because object = object is always true. So this logic will not impact the rest of the query it will just allow to enter any value in the user prompt
in the report when i try to create a new variable
=ToNumber(UserResponse ("Query 1 with NEW_UNIV" , "Give number"))
it automatically turns it into a detail and i cant change it to measure or dimension.
is there a way to fix this
thanks in advance

some one answered in the following link
[When I define a variable in BO it automatically turns it into a detail;

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

When i import my pictures into lightroom, they are blurry, when i click develop they automatically

when i import my pictures into lightroom, they are blurry, when i click develop they automatically focus, but when i click library, they blur again... i use canon and jpeg, why is this and how do i fix it?

Yes, in library ive zoomed into 1:1 and the image is nice and sharp, but when i zoomed out, the sharpness disapears and the image is blurry again. I see a lot of people are having this problem. I also called adobe and talked to someone and they had no idea whats going on,

When I import my photos into lightroom 4 they all turn to black and white...what is going on?

When importing the photos are color...but when I go to the develop module the all start going to black and white...before my eyes!

sounds like you either got a black and white preset selected in the 'Apply During Import' section of the Import Dialog (over on the right), or you've created a default setting in Develop. For the first, make sure no Develop preset is selected. For the second hold down your Alt key on PC, or Option key on Mac in the Develop Module. The Reset button will turn into 'Set Default...' on the bottom of the right panel. This will open a dialog box. Choose the left button that says 'Restore Adobe Default Settings'.

Each time I create a new album in IPhoto, photos from another album or from photo stream are automatically dumped into the new album.. how do I create a blank album and then import photos from a flash drive into the new album?

each time I create a new album in IPhoto, photos from another album or from photo stream are automatically dumped into the new album.. how do I create a blank album and then import photos from a flash drive into the new album?

just import the iPhoto
Surely you meant "just import the photo"? The Spell checker is dangerously creative !

Import video and be broke into separate clips by scene breaks.

Is there no way anymore to have iMovie create separate clips for imported movies by scene breaks on the camcorder? I know previous versions would recognize when the filming stopped then started again and separate these into separate clips.
(I'm talking about in the Even Library not Projects)
I know I can select one frame and delete it to create separate clips then but its one more step and will lots of scene breaks makes it a pain in the @$$

I am importing from a Sony Digital 8 camcorder through firewire just like I always did. When I imported the footage in imovie o9 instead of detecting when the recording stopped and started again and breaking it into separate event clips it put it as on big clip.
It imports the clips as .dv files

How can I get voice over clips to automatically go into its own folder in CS6

When I make a voice over clip while in PP CS6, the clip goes into the project folder. I want them to automatically go into the folder that corresponds to the clip I am doing the voice over for, but I can't seem to do this unless I manually move the clip over..

Thanks for your help here, but I made a mistake in presenting my problem.
I meant getting them to go into the selected bin, not folder, my mistake. Prior to recording the voice over, I highlight the bin I want the .wav file to go into and when finishing the recording, it goes into the project window, not into the selected bin. The only way I can get it into the bin is to manually move it there.
Do you know how to solve my problem by having the voice over go into the preselected bin?

My iPod cannot turn on, however it can when it is on my iPod dock. It won't even sync into my computer. Once I take it off of my dock it automatically turns black and I can't turn t on. How can I get it back to normal?

My iPod cannot turn on, however it can when it is on my iPod dock. It won't even sync into my computer. Once I take it off of my dock it automatically turns black and I can't turn t on. How can I get it back to normal?

Does your home button work?

AI CS6 vectors turn into embedded image when using clipping mask

AI CS6 vectors turn into embedded image when using clipping mask, how to solve it?

With the Clipping Mask selected go here

Successfully imported external swf, can not put it into movie clip

Hello all,
I have started learning AS3 and gradually getting used to, trying to put external swf into movie clip.
Successfully imported target swf and put into stage, when I publish this I see target swf is playing.
import flash.display.MovieClip;
var BGLoader:Loader = new Loader();
var BGurl:URLRequest = new URLRequest("HomeBG.swf");
BGLoader.load(BGurl);
BGLoader.y = 0;
BGLoader.x = 0;
addChild(BGLoader);
As next step I want to put this swf into movie clip and get more control, but when I publish bellow only I see is empty background, without any errors.
import flash.display.MovieClip;
var BGLoader:Loader = new Loader();
var BGurl:URLRequest = new URLRequest("HomeBG.swf");
BGLoader.load(BGurl);
BGLoader.y = 0;
BGLoader.x = 0;
//addChild(BGLoader);
var animMC = MovieClip(BGLoader.content).getChildAt(0) as MovieClip;
addChild(animMC);
Is anything missing?
Any help would be appreciated, thanks.

You can only access Loader.content after Load completed successfully.
Try this,
import flash.events.Event;
var BGLoader:Loader = new Loader();
var BGurl:URLRequest = new URLRequest("HomeBG.swf");
BGLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, completeHandler);
BGLoader.load(BGurl);
BGLoader.y = 0;
BGLoader.x = 0;
//addChild(BGLoader);
var animMC:MovieClip;
function completeHandler(event:Event)
animMC = event.currentTarget.content;
addChild(animMC);

Import Automatically turns into Reject clip

Similar Messages

Maybe you are looking for