Import Autosplit not work correct, especially with iPhone 4

Hi everyone,
I've tried searching for this topic, and the best thread I have found is; http://discussions.apple.com/thread.jspa?messageID=12338876&#12338876
This describes the problem I am having, but it doesn't seem to answer it.
I use Aperture 3.1.1 with both my Nikon D80 and my iPhone 4, and the autosplit error is occurring only on my iPhone 4 (which also has photos from my iPhone 3G on it too)
Basically, in spite of the EXIF data showing, for example 14/02/2010, it will split the photos into a project for 13/02/2010 and 14/02/2010.
All the photos are being taken in the same day, so there are no midnight crossover problems, and I have checked the timezone data on my phone, computer and checked they are matching in Aperture, it will still split them in such a way.
Has anyone else had this issue and know any way to fix it that isn't in the other thread?
Your help in this is preemptively appreciated!

Hello, Doctorfroma.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing this issue.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/ts2756
Cheers,
Jason H.

Similar Messages

TS4079 Since the latest IOS update Siri is not working correctly on my IPhone 4S. What happened?

Any help in understanding why Siri is not working properly would be most appreciated. Siri has not been working properly since I received the update to iOS 6.0. Siri acts as though it is looking for an answer or making an appointment for several minutes , but never answers the questions, makes the appointment, or Siri give nonsense answers. As of this moment, Siri is of no use to me at all.

Try these steps in order
-Restart iPad
-Hard reset(Hold power and home button until it restarts)
-Backup and restore
After the restore, set it up as new iPad. That way we can tell if it is the software or a hardware issue.

Smart Playlists Not Syncing Correct CONTENT With iPhone 3G

Hi, I apologize about the length of this description, but I believe all or most of it may be relevant.
I have been having trouble synchronizing ANY of my smart playlists. I first noticed it in the playlists I had created which entailed "Most Recently Added" or "Most Recently Played" options. Now I realize that all of my smart playlists are no longer syncing their play order (some too big to determine if songs aren't making it into some of them). For instance, here is the criteria for a playlist I created just to demonstrate this problem (this is a brand new playlist just I made and synced with my iPhone):
Title: Recently Played 5
Criteria: Rating is in the range 3 stars and 5 starts
Checked Boxes-
(X)Limit to [5] items selected by most recently played
(X)Match Only Checked Songs
(X)Live Updating
Playlist as it appears in iTunes:
"Summer, Man" by Taking Back Sunday
"Sink Into Me" by Taking Back Sunday
"New Again" by Taking Back Sunday
"Error: Operator" by Taking Back Sunday
"Swing" by Taking Back Sunday
Playlist as it appears on my iPhone:
"Them Bones" by Alice In Chains
"Hands in the Sky (Big Shot)" by Straylight Run
"Lead Said (And A Paper Anchor)" by Atreyu
... etc
These playlist CLEARLY do not match and it drives me crazy because these types of playlists are what I generally listen to. I'm running iTunes 9.0.1.8 on Windows 7 OS (Dell Inspiron 6400), and OS 3.1.2 on an iPhone 3G. I just recently consolidated my library. I had a collection of over 7000 songs on my external hard drive backed up, and kept about 4000 of them on my computer stored in iTunes (i.e. only the 4000 songs were present in my iTunes library, originating from my laptop hard drive--NOT EXTERNAL). Upon switching to Windows 7, I wanted to have ALL my music on my laptop hard drive and thus copied and re-added all of the music (all 7000). I lost all my track info (ratings, plays, last played date, date added, etc) in this process until I opened the iTunes library file with iTunes(had backed up from before new OS installation) and, voila, all my playlists and track info was restored. I had to do some cleaning up of duplicate files, but nothing major.
I found this thread from Sept. 2008 which seemed to be in regards to the exact same problem under almost the exact same situation: http://discussions.apple.com/thread.jspa?messageID=8066846#8066846. Unfortunately, it's unanswered and archived. My iTunes did not crash, but I cleanly installed a new OS and had to start fresh.
I cannot for the life of me figure this issue out. I thought about restoring my device and syncing it again (which I will try again tomorrow to see if I can manage any progress), but I want to retain my app info and text messages so I plan on restoring from a backup. If anyone has any solutions or even suggestions, I'm open to try anything.
Thanks!

This looks like yet another example of the "smart playlists with live updates are broken" bug, which has been discussed at length in this forum. Two "fixes" are known to work, at least some of the time:
1) turn off live updates (yes, I know that defeats the purpose of a "recently played" list; so does the current situation, where you have apparently random tracks instead of the right content).
2) add a "playlist is Music" rule to the playlist (in addition to the ones you have now).
In my experience the "playlist is Music" fix also has the effect of turning off live updates (regardless of what the checkboxes say), but other people report no such problem. So it might work for you.

ICal alerts not working correctly on my iPhone (Version 3.0)

With my iPhone turned ON, any alerts that are set for any of my calendars show up in the correct way. If my iPhone is turned OFF when an alert was due to sound, with the previous software version 2.2.1, when I turned my iPhone ON it would still alert me, but since I've updated to version 3.0, this doesn't happen anymore? I'm sure it should do, I've always received alerts from my iCal on my iMac when I switch it on in the morning for any alerts that should have sounded whilst my computer was off. Has anyone else noticed this or have, is it a glitch or have I just been unlucky when I updated? If that's the case, any ideas how to resolve the problem, other than a full restore!!

Try these steps in order
-Restart iPad
-Hard reset(Hold power and home button until it restarts)
-Backup and restore
After the restore, set it up as new iPad. That way we can tell if it is the software or a hardware issue.

Having problems with some links not working. Especially with webhost

I sent this about 1/2 hour ago but never received the confirming email so thought I would try again. Sorry about the dupe if you did receive this.
I am having a problem with Firefox. I have a website that I need to check stats with. I was able to login but when I clicked on the link for the stats nothing happened. No new page, no new window, no new screen. I tried all links and still nothing. At bottom of page it said "done". Then I got out of the webhost and tried other links, some worked some didn't.
I went into Safari to check, and I was able to get my stats, so I tried again on Firefox, still nothing. I noticed a few other problems also, where I got the strangest things happening. Like when I tried to get on GoogleAds and YahooAds it didn't recognize me and also started redirecting me to other stuff.
I prefer using Firefox, is there anyway to make the fixes?

Downgrading is not supported by Apple.
For better or worse, the burden is on app developers to make their apps compliant to the current iOS. If they haven't done that, then unfortunately users are stuck until they do so. The most you can do is communicate your issues to your app developers and see if they will get an update out to make their app work again. That or find another app.

Apps not working after crash (with iPhone 2.0)

I'm using a 1st generation iPhone with the iPhone 2.0 update. Today, my phone became unresponsive after trying to start the Brain Challenge app (updated to the latest version), even holding down the home key to force quit the app did nothing. I had to do a hard reset (holding down the home key and the sleep button), and after a longer than usual time to reboot, several of my apps no longer work.
I get a message saying "The application "xxx" cannot be opened" when trying to start the Facebook app, Apple's Texas Holdem, Brain Challenge, Bloomberg, Tap Tap Revenge etc. etc. (although some, such as Apple's Remote, do work).
I'm guessing I need to recover it from backups, but how can I do it such that I don't lose those apps I have paid for that I have bought since the last time I backed up?

anyone?

My power off is not working correctly on my iphone 5

i have been having problems for a week or so now, the power off/standby button works intermittently, not sure if part off the same proble but when i try take a photo the camera just shows red and black lines? help

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly. The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anyth

Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly. The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anything. I have taken my car to my local dealer but they say the Radiosat is working ok?

Hello there stidhambr15,
I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't quite get the device going again, I recommend restoring the device.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
iPhone and iPad: How to remove the SIM card
http://support.apple.com/kb/ht5163
iPhone 4 (GSM model)
iPhone 4S
Cheers,
Sterling

Why can I not import pictures any more? Lightroom says "Your Lightroom 5 64-bit does not work correctly"

Why can I not import pictures any more?
Lightroom says "Your Lightroom 5 64-bit does not work correctly"
Technical informations:
PC with Windows 7 64-bit, Lightroom 5.7.1 64-bit installed.
What I have done:
I downloaded the newest LR 5.71 and installed it again - mode repair; without success
I checked my PC with Norton 360: full scanning and optimizing registry
I restarted the PC and than I installed the LR 5.7 again - repair
Trouble 1:
Two days ago I could work with my LR 5 and to import pictures from a SD was no problem. Now I can start LR 5 and I can watch/modify pictures, but as soon as I try to import new pictures LR 5 stops and gives the message "your LR 5 64-bit does not work correctly - searching for solution". I have not changed anything in my computer since lasttime LR 5 worked properly, only the registry was optimized by Norton 360.
Trouble 2:
I live in Switzerland and my language ist German. I dit not find a place where I can present my problem in German, e.g. a phone number oder email-address oder german-chat. My English is to week for a discussion for computer problems and do understand it.
Help:
I would very appreciate if anybody can help me, either to trouble 1 or to trouble 2. Thanks.

Sehen Sie diesen Beitrag:
Photoshop CS4 & Lightroom 2.6 X64 funktionieren nicht mehr
Wacom Tablet-Treiber-Problem?

I have an iPhone 4 on contract and its not working correctly , what should I do ?

I have an iPhone 4 on contract , I only have this 5 and a half months and the iPhone is not working correctly and i do not have insurance .. What should I do ??

It sounds like you did not purchase it at the Apple store? That doesn't matter - you can still take it to Apple to troubleshoot it.
You can also try to troubleshoot it with the help of the folks here - if you want to do that, let me know and I'll ask that your post be moved to the iPhone forum where you're more likely to get knowledgeable answers, ok.

Itunes 11.1.5 will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?

Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?

Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
Select the ipsw file and let it restore.
If you dont have it downloaded then simply click on restore.
I hope it works
Cheers !

Is prompted filter not working correctly with calculated items

Hello,
I am working on OBIEE 11.1.1.3 and having problem problem linking 2 analisys with action link
The test case is:
I have 2 attribute columns on a dimension
1. Conto 1 Code
2. Conto 1 Dsc (in RPD i set up the property Descritor ID of -> Conto 1 Code)
3. Conto 2 Code
4. Conto 2 Dsc (in RPD i set up the property Descritor ID of -> Conto 2 Code)
5. Conto Detail
and 1 measure on the fact table
1. Revenue (defined on RPD as simple sum)
On presentation layer i have the analisys:
1.
The First one using as Criteria: Conto 1 Dsc | Conto 2 Dsc | Revenue
The layout is a table with sub-total on Conto 1 Dsc
On Revenue i created an action link to the second analisys containing
2.
Criteria: Conto 1 Dsc | Conto 2 Dsc | Conto Detail | Revenue
Filters: Conto 1 Code (is prompted) | Conto 2 Code (is prompted)
This pair of analisys are working fine.
Then i created a second pair of analisys as:
1.
Criteria: Conto 2 Dsc | Revenue
Using Calculated group \ Items i created a numerous set of sub-totals
On Revenue i created an action link to the second analisys containing
2.
Criteria: Conto 2 Dsc | Conto Detail | Revenue
Filters: Conto 2 Code (is prompted)
This pair of analisys are not working correctly. When i drill from first analisys to second one the Conto 2 Code filter is not used.
Replacing in the second analisys Conto 2 Code (is prompted) with Conto 2 Dsc (is prompted) a filter is being generated on the drill but it's using the Conto 2 Code value and the analisys ends with no results.
Thanks,
Jonni

Try adding Conto 2 code to the first analysis and keep the filter on the second analysis as Conto 2 code is prompted.
-Amith.

Need help iPhone 5 not working correctly

my iPhone 5 keeps pressing all the keys around the key I want it to press on the keyboard also problems using lock screen numbers have re-started and the phone just reverts to not working correctly
also when I got this phone I did it from a back up of my old iPhone 4 but not all the songs have fully downloaded (they are there, but cannot play) when I look on iTunes it says I have no songs that arn't on my iPhone that I've bought?
Should I take my phone back to my carrier which is 3? Or make an appointment at the Genius Bar?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).
Backups do not contain media, all the media should be in iTunes on your computer. Simply select the content desired to sync to the device and sync.

IPhone 3Gs notes not working correctly

I use notes app all the time on my iPhone and noticed today that it is not working correctly. When I make a new note it takes forever to save it, meaning the little indicator keeps spinning on top showing the iPhone is working. Then once it is saved if I close it and come back into it to add something more to the note, it saves it for a second and then deletes what I just added. What can I do to fix this? I have a 3Gs software version 4.0.1. Thanks

I did the reset and it 'appears' to be working. I still need to test it more before I am convinced. The reason I say this is because it still takes an abnormally long time to save a new note. I simply type one word into the notepad and say 'done' and the indicator at the top spins for several minutes. The information is still in the note so maybe its working. I wonder why it takes that long? Is that typical? I dont recall if it was always like that or I just noticed it because the function was not working properly??

I just to a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

I just bought a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

Hi there,
It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
-Griff W.

Import Autosplit not work correct, especially with iPhone 4

Similar Messages

Maybe you are looking for