Import budget by using DTW, error message "cannot find this object in B1 application defined, object defined error 65171

Dear Sirs, I try to import budget header and budget line by using DTW, however error message found, "Cannot find this object in B1 application defined, object defined error 65171. Regards, Saw Hua

Hi Javier,
Please check below links.
DTW Error 65171
DTW error 65171
DTW, Unkonwn error 1005!65171
DTW error 65171 - Cannot find this object
DTW error65171
SAP B1 Data Transfer WorkBench : Data too large... | SCN
Hope this help
Regards::::
Atul Chakraborty

Similar Messages

Bearts Audio Control Pannel will not open. Get error message cannot find startup file

Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500Z

Hi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Syincing error message "Cannot find required disk" - Help!

I have a third gen 4gig nano that I got at Christmas. I added two CD's onto it when I got it. Now, however, I'm having trouble syning anything else - that's all I've been able to put on it are the two CD's even though I've added more into my library. I keep getting the error message "Cannot find required disk". Can anyone help me or tell me what I need to do?
Thanks in advance!

Even though you're not getting a -50, I'd check on the following document. (Your message is one of the possible symptoms of the problem outlined in the document.)
iTunes displays -50 error message when syncing iPod on Windows XP

Error message, Cannot find iTunes Connect user

I cant access my I tunes from my Iphone, I get the following. Authentication Error. Cannot find iTunes connect user (2002)(2002)

Hello wallydt,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
Best of luck,
Mario

Error message Cannot find mozilla run time

When trying to access Firefox on my PC get message Cannot Find Mozilla Run Time. OS Windows XP

hello gwojcik, can you test if the problem is still there after a clean reinstall:
*download the full firefox setup file from getfirefox.com
*uninstall firefox on the machine
*manually delete all remaining files in the firefox program folder, which usually resides in ''C:\Program Files\Mozilla Firefox\''
*reinstall firefox

Firefox V4 opens Windows error message "Cannot find...."

I updated Firefox to version 4. Now, every time I open Firefox a Windows Error popup appears stating...
Windows cannot find
'https://login.yahoo.com/config/login_verify2?.intl=us&rand=832809823&i=IWZkZHNKIXRzZnNydEpidXV4dSF0ZEqOZHh4fH5iU356YmNYcnM%3d&.src=ym'
In spite of the error message, Firefox proceeds to open normally and takes me to Yahoo.com. Closing the error message has no affect pro or con...so, the message is merely a nuisance. I've tried everything I can think of to permanently remove it with no success. Running a deep scan to find out if it is a virus didn't find anything. Am using XP Home edition. By the way, I get a similar Windows error message when I try to open GMAIL, and Firefox then opens my GMAIL account. Weird.
Am hoping someone can tell me how to prevent these messages from appearing. Thanks in advance!

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

Error message: cannot find flash.ocx

After receiving a POP UP for a free Adobe Flash Player I
choose to install it. Since then I get at least 50 POP UP messages
saying the same thing..(I have to "X" out of them to continue
processing) "Cannot find flash.ocx" - how do I either fix it or
delete it.

This has been a problem for quite a while in our company and it's pretty much an everyday occurrence.
We have around 500+ that get the exact same error: cannot find flash.ocx
The work around we use is to copy the Flash.ocx file from one PC that still has it and paste it into the C:\WINDOWS\system32\Macromed\Flash directory of the PC that has the problem.
In our case renaming the current updated file Flash10d.ocx to Flash.ocx also works but this may not work for you.
Now the two work arounds above are fine but as soon as adobe has an update the file is once again replaced with the latest updated file! And you have to perform the work around again.
You can see what the update does by looking at the install.log file located in the same directory. It’s just a text file so you can view it in Notepad C:\WINDOWS\system32\Macromed\Flash
Bellow is a snipet of log file:
IfFileExists: file "C:\WINDOWS\system32\Macromed\Flash\UninstFl.exe" does not exist, jumping 948
IfFileExists: file "" does not exist, jumping 952
Delete: "C:\WINDOWS\system32\Macromed\Flash\Flash.ocx"
Delete: "C:\WINDOWS\system32\Macromed\Flash\Flash6.ocx"
Delete: "C:\WINDOWS\system32\Macromed\Flash\Flash6a.ocx"
The bellow does not work but interesting at that:
I did try editing the screen saver file directly to point it to a different directory, in which I would then place the Flash.ocx file but unfortunately although the .scr file can be viewed in Notepad, making a change to the file will destroy it. Please make a backup of the file first if you want to see whats inside. You can use Ctl + F to search for Flash.ocx etc..
Although not really a hindrance in day to day work screen burning could potentially be an issue!
Hope this helps someone.
Thanks,
Simon

[ME21] error message : cannot find message associated with key

Dear all,
I try to develop an Mobile application using smartSync,
but when the application running (on client) got an error message :
Error: 500
Location: /UPLOAD_TEST/upload_testapp/Menu.do
Internal Servlet Error:
javax.servlet.ServletException: cannot find message associated with key : dispatcher.forwardException
at org.apache.tomcat.facade.RequestDispatcherImpl.doForward(RequestDispatcherImpl.java:238)
at org.apache.tomcat.facade.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:162)
at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:423)
at 0002findex0002ejspindex_jsp_0._jspService(_0002findex_0002ejspindex_jsp_0.java:62)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java)
note:
when create this application, I'm using tcode : merep_sbuilder
Sync type : U01 - Upload using SMAPIs
Bapi wrapper : MEREP_CONTACT_CREATE
SAP Mobile Engine 2.1
and generate .war file using MDK tool
any one know about this ??
thanks & regards,

Hi,
this error comes up when the destination serlvet throws an exception other than ServletException!
Its a standard tomcat bug!
Rgds Thomas
-->
http://issues.apache.org/bugzilla/show_bug.cgi?id=19114
-->From apache.org:
When a forwarded servlet throws an exception other than ServletException or
IOException, the thrown exception is lost. This is due to the line:
throw new ServletException(sm.getString("dispatcher.forwardException", t));
(found in org/apache/tomcat/facade/RequestDispatcherImpl.java:210)
the earlier catched t is here not passed into the constructor of
ServletException but into getString.
To reproduce construct a servlet that throws an Exception (other than
ServletException and IOException) and another servlet that forwards to it. You
will get just a forwardException (if you have the proper locale strings
installed!) but the originally thrown exception will get lost forever.

Error message: cannot find browsers plug in directory

I am trying repeatedly to install flash player 9. I have
installed from the web site, I have down loaded the installer file
and ran that. I have downloaded the uninstaller, ran that,
rebooted, reinstalled from the web site, rebooted and still
nothing. I keep just getting white blank boxes. this is so
frustrating. When I run the downloaded installer it keeps coming up
with an error message that says flash player cannot detect your
browsers plug in directory. I don't know where to install the file
to, i don't know where the browsers plug in directory is. help
please

Hello Ian,
From what I understand, this problem occurs because of the fact that DSC loads some DLLs dynamically in some of its VIs. Since they are loaded dynamically (instead of having concrete search paths), it takes LabVIEW a while to find them...if it takes too long, you will receive the error you mentioned.
From what I understand, this problem does not occur in the 6.1 version of the DSC module. If you are still using 6.0.2, the simplest workaround for now is to use the File >> Open option in LabVIEW instead of double-clicking on the LLB.
I hope this suggestion helps. Good luck with your application.
Sincerely,
Darren N.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Error message - cannot find where its coming from

Hi Guys,
I have a default error message setup, and I need to get rid
of it for debugging purposes.
Problem is, I cannot remember where the template is coming
from.
Theres nothing setup in application.cfm. Is there anywhere in
cfadmin where it might be set?
I'm using CF 7
Thankyou

Mattastic wrote:
> Hi Guys,
>
> I have a default error message setup, and I need to get
rid of it for
> debugging purposes.
>
> Problem is, I cannot remember where the template is
coming from.
>
> Theres nothing setup in application.cfm. Is there
anywhere in cfadmin where it
> might be set?
>
> I'm using CF 7
>
> Thankyou
"Site Wide Exception" handler configured in the Administrator
most likely.
<cferror...> tags potentially embedded in your CFML
files.

Why songs dwnlded have ! and error message cannot find file?

Why do some of the songs downloaded from other places than itunes are listed in itunes but cannot find the file? Where did it go? Please help!

Hello Ian,
From what I understand, this problem occurs because of the fact that DSC loads some DLLs dynamically in some of its VIs. Since they are loaded dynamically (instead of having concrete search paths), it takes LabVIEW a while to find them...if it takes too long, you will receive the error you mentioned.
From what I understand, this problem does not occur in the 6.1 version of the DSC module. If you are still using 6.0.2, the simplest workaround for now is to use the File >> Open option in LabVIEW instead of double-clicking on the LLB.
I hope this suggestion helps. Good luck with your application.
Sincerely,
Darren N.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Error Message:"Cannot find or create the font 'WP-MathA'. Some characters may not display or print correctly." Who can help me solve this problem?

Some of the pdf files I work with (receive) come up with a comment: “Cannot find or create the font ‘WP-MathA’. Some characters may not display or print correctly.” Who can help me solve this problem?
Thank you in advance for your time.
Marlen

Hello Anubha,
I am having a similar problem on my machine. I was using Word 2008 and I created a PDF inside Word.
I am opening the file on the system itself and I am running Windows 8.1. I am using Version 11 of Reader.
When the PDF I created (my resume) attempts to open, it says: cannot find or create the file Times, Bold. Some characters may not display or print correctly.
However, the entire Reader keeps freezing and will not allow me to open or test print the document. Also, it is not displaying any of the Bold Times New Roman Print. Can you please help? Thanks.

Error message cannot find song

Every time I try to buy a song on iPhone I today started to get error message (can't find song) I search a song it finds it I press buy and I get error message can't find song I'm signed in an iBooks also signed in I restarted , restoring login logout everthing I read on Internet. I think it just won't let me buy till I update software?

I think there was a update to the iTunes app the other day but I can't be sure

When I try to open a .jpeg in Bridge CC2014, I get the error message cannot find Photoshop CS6.

I have associated my .jpegs with Photoshop CC2014. I had to do this manually. Now, every other program opens them in Photoshop, except Adobe Bridge CC 2014.
If I try to Open a .jpeg (or any other file associated with Photoshop) Photoshop from bridge, it says It cannot find the photoshop cs6.exe file. Of course not! I uninstalled it before I installed CC. Maybe two years ago. And now Bridge CC2014 goes looking for that as the CS6 default Photoshop.exe?

I finally got it to work by going into Bridge->Edit>Preferences>Default settings. After choosing a file that is supposed to open in Photoshop, I chose to change it and browsed to Program Files>Adobe>Adobe Photoshop CC2014 and manually linking each filetype to the photoshop.exe.
I have spent the better part of a week getting Adobe software to work again after the Adobe CC2014 install. I will never trust Adobe CC updates again. They failed to warn me that CC2014 installs as a completely different copy rather than an update of CC. As a result, I ended up uninstalling CC apps after installing 2014. A mess that has cost me more than *30 hours* of chasing around forums, manually re-associating files. Even a registry hack! Found by a user, not by adobe.
Ordinary users shouldn't have to do this sort of thing after a normal install from the Creative Cloud panel. The genius software engineers at Adobe are being totally undercut by the keystone cops in the cc updates and install department.

DTA won't run ... error message cannot find file

I downloaded Data Transfer Assistant, and put it on my desktop. When I run it, it says
System Error: The system canno0t find the file specified.
I found the DTA log file, all I find are a lot of entries showing...
[02/21/2010 21:36:20] [information] [Nov 9 2009] [19:48:15] application exit
[02/21/2010 21:45:03] [information] [Nov 9 2009] [19:48:15] application initializing
[02/21/2010 21:45:05] [information] [Nov 9 2009] [19:48:15] application exit
[02/21/2010 21:49:46] [information] [Nov 9 2009] [19:48:15] application initializing
[02/21/2010 21:50:56] [information] [Nov 9 2009] [19:48:15] application exit
no data, or what file it is looking for. I tried running it from the Palm Desktop application folder with no luck. I even tried Sysinternals Procmon to see what file it is failing on, but nothing made sense. Any ideas?
I have been migrating my Palm devices for quite some time, and was wondering if it was that my Palm Desktop applications may be in the old locations? I don't know. Everything on my old Centro worked just fine.
Windows 7
DTA 1_3
Outlook 2003 SP3
Palm Deskto 6.2.2
Hotsync 7.0.2
Any ideas???
Thanks

So I signed onto chat help, spent an hour or more. The "tech" never really seemed to understand what the problem was, despite my making it brutally clear: DTA had run, but would not now.
It seems that there's something that stops Palm Desktop from transferring the entire calendar after ~2,000 events are sent. It appears to hand on a specific date, but there are no events on that date or those bracketing it.
I then exported Desktop's DBA file, converted it to ics, imported it into Outlook, and tried to run DTA. Got that message that it could not find a file. So I logged in as another user after putting the ics file on a thumb drive, opened outlook and imported the file and it was clearly all there. Downloaded a new DTA, and it ran ... but then said there was nothing in outlook.
So I copied the DTA file onto the thumb drive (thinking I had a live & working model), went back to my log-in. Guess what? It couldn't find a file to enable it to run.
So I logged in as another family member, Opened outlook, imported the ics file, BUT had it import it as the base calendar, rather than as a new one.
Again downloaded the DTA, ran it ... and it found the Outlook files, imported them, and is now integrating them into the correct calendar on the Pre 2.
Terrible O+PITA, but it now works (I think).

Import budget by using DTW, error message "cannot find this object in B1 application defined, object defined error 65171

Similar Messages

Maybe you are looking for