Import Child Items In R12 with a template is not picking up from Interface

Hi,
When we are trying to Import Child Items of a master organization item, with a template name, records in the interface table are not picking up at all.
We are doing this in R12, please let us know if any new columns become mandatory or what else could be the problem.
Thanks
Shekhar S

Hello Ninad,
Please, see the SAP Note 21583. I think it might be of help for your case.
Best regards,
Esther.

Similar Messages

  • Re: With holding tax is not picking up while excution of RERAPP

    Dear team,
    While executing the RERAPP.With holding tax is not picked.We are working on 4.7 version.We had suggested a badi to pull the with holding tax field.Still system is not showing any caluculation.Plz advice us if any one of you did the immplimenttation in 4.7 and how you resolved this problem .So that it would be help ful for us too.Please do the need ful.
    Regards,
    Suma.

    Dear Sir,
    What we did is all the with holding tax data include the basic amount calculations manually in excel there after  given the input to the system through accounting interface. You can try with your abaper. Plz make sure that GL code length and currency .This has been done through so much work around. Technical person will guide you .If you still facing the problem where exactly your facing then i can help you out.Please be more clear what you did till now then only i can explain you with clarity.
    Regards,
    Suma.

  • R12 Staging in Linux (Autostage is not picking up from next dvd)

    Hi,
    I am doing the autostage using perl.
    How to do?
    anyone give - step by step in details.
    Thanks in advance
    Regs.
    TS

    Duplicate thread (Please post only once):
    R12 Staging in Linux (Autostage is not picking up from next dvd)
    R12 Staging in Linux (Autostage is not picking up from next dvd)

  • How to set the item property to restrict the user to not to copy from above

    Hi Guru's,
    I have a requirement like, There were two items on the form name email Id, Confirm email Id.
    I have to ristrict the user to not to copy from email Id item.. make him/her to enter the value into confirm email id item field manually.
    How to set the item property to restrict the user to not to copy from above item and paste it in this item.
    Please help.
    Thanks!!

    Just an opinion here, but that is about the dumbest requirement I have ever seen.
    I am always annoyed by web sites that ask me to enter my email twice. I ALWAYS copy the email address from the original entry and paste it into the second one.
    People enter their email addresses so often, it takes a real klutz to not get it right. And what makes you think that if they enter it twice, that they won't enter it wrong both times anyway???

  • BCS New Item creation - Column with Name 'ID' does not exist.

    Hello All
    I´m creating a BCS and i´m getting a strange error. I have created all the operations and created a list based on the external contente type. In my table the column ID is the primary key with identity.
    When I use the new item form I get the following error. But the new item is created.
    [ArgumentException: Column with Name 'ID' does not exist.]
       Microsoft.SharePoint.BusinessData.Infrastructure.GenericAdapterObject.get_Item(String key) +19563585
       Microsoft.SharePoint.BusinessData.Infrastructure.RuleInterpretingTypeReflector.Get(ITypeDescriptor typeDescriptor, ITypeDescriptor instanceRootTypeDescriptor, Object instance) +59
       Microsoft.SharePoint.BusinessData.Infrastructure.CompositeIdentifier.GetIdentity() +668
       Microsoft.SharePoint.BusinessData.Runtime.EntityRuntime.Create(IEntity thisEntity, IFieldValueDictionary fieldValues, Identity identity, AssociationEntityInstancesDictionary associationInfo, ILobSystemInstance lobSystemInstance) +2386
       Microsoft.SharePoint.BusinessData.MetadataModel.Static.Entity.Create(IFieldValueDictionary fieldValues, ILobSystemInstance lsi) +82
       Microsoft.SharePoint.SPListDataSource.InsertItem(SPListItem itemToInsert, IDictionary dictValues) +1671
    [SPException: Failed to create a list item for this external list based on the Entity (External Content Type) '...' in EntityNamespace '....'. Details: Column with Name 'ID' does not exist.]
       Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex) +23989128
       System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) +4064980
       Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit() +378
       Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e) +24
       Microsoft.SharePoint.WebControls.SaveButton.OnBubbleEvent(Object source, EventArgs e) +691
       System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +70
       System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +29
       System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2981
    Thanks for the help,
    Regards,
    André

    Hello All,
    I already found the problem and it was an error in a trigger in the database.
    Thanks.
    Regards,
    André

  • Windows Azure Cloud Service with MVC4WebRole template giving "Not running in a hosted service or the Development Fabric." Error.

    Azure SDK used - 1.7 & 2.0
    When we create new project for Windows Azure Cloud Service with MVC4WebRole template & try to run it locally its giving error as "Not running in a hosted service or the Development Fabric."
    We are aware that making Azure project as start up project will resolve this error but we want to run the application locally before testing it with cloud.
    It’s not working with Cassini so we have tried with IIS but still it’s giving the same error.
    In another project when we added ASP.Net MVC4 Application & then for that project we have generated the Azure cloud service project using "Add Windows Azure Cloud Service Project". By this way debugging it locally works fine.
    Is there something additional settings present in Windows Azure Cloud Service with MVC4WebRole template which is causing this issue?

    hello,
    According your description, I try to reproduce it in my PC.
    >1. I create a could project and add a MVC4 web role into project.
    >2. I set the azure project as a start project and run, it works fine.
    >3. I change the MVC4 web role as a startup project and run, it works fine too. Of course before this, I exited the Azure Simulator.
    But this project was a empty project. It didn't included azure DLL file, such as Diagnostics file. So I think you could comment out the "system.diagnostics" node and try again. Also, you could refer to this same thread:http://stackoverflow.com/questions/13879443/not-running-in-a-hosted-service-or-the-development-fabric-production-not-debug
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • REG: while doing PGI with ref to OBD should pick stock from one location

    Hi experts ,
    I have a n issue while doing PGI with ref to OBD.
    1.We are purchasing Raw material Aluminium circle 1000 nos from "X" vendor & keeping stock in Main stores i.e 0001 location plant-1.
    2.From there we are issuing to production line i.e 0003 location(Plant 1)500 nos.
    4.Remaining stock of 500 nos is in 0001 location in under some Batches.
    5.Meanwhile we are suppose to transfer the aluminium circle to plant 2 .
    6.For this we are raising STO for aluminium circles  600 nos to Plant 2.
    7.With ref to STO we are raising OBD for Plant 2.
    8.With ref to OBD While doing PGI it should picks the stock from 0001(Main Stores)  location only.
    9.But the STO qty is 600 nos ,availablity of stock in 0001 is 500 nos only .
    10.While PGI  it takes 500 nos from 0001 location & remaining 100 nos picking from Production line 0003.It should not pick from Production line 0003 location .
    11.For this system should not allow to pick from 0003 location & also system should throw error message "Deficit of QTY in 0001 location"for 100 nos.
    KIndly suggest me asap.
    Thanks in advance
    vichu
    Edited by: viswanathan seenuvasan on Dec 10, 2009 7:01 AM

    Hi,
    As I understand the picking is done automatically in outbound delivery. Am I right?
    a)
    If picking is not done automatically but manually, why the user defines the production storage location in the OBD? In this case some training would be necessary....
    b)
    If it is done automatically: which settings are you using? Batch determination only?
    1. In stock determination (SPRO > MM > IM > Stock determination > Define strategies for Stock Determination) you can define which storsage location should be used by system, and you can assign the stock determination rule to the applications (SPRO > MM > IM > Stock determination > Assign Stock determination Rule in the Applications)
    (you also have to assign the stock determination group to the material master (MARC-EPRIO))
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/d8/2f3746996611d1b5480000e82de955/frameset.htm
    2. You have to use batch determination
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/25/283aac4f7811d18a150000e816ae6e/frameset.htm
    3. You have to use availability check in delivery not to ship out goods for which reservation already exists (if goods are in production storage location I assume you have a PrdOrd...)
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/93/744cd9546011d1a7020000e829fd11/frameset.htm
    I haven't tries this but I assume it should work...
    Please check SAP online help.
    Regards,
    Csaba
    Edited by: Csaba Szommer on Jan 1, 2010 11:02 AM
    Forget stock determination. Instead of it you should use picking location determination - suggested by Laksmipathi. It wokrks fine with batch determination.
    SPRO > LE > Shipping > Picking > Determine Picking Location > Assign Picking Location
    Edited by: Csaba Szommer on Jan 1, 2010 5:03 PM

  • Importing Child Domain Object Along With Parent Domain Objects

    I have two AD AWS services. Both are doing full sync. Once is pointing to Domain A which has x users, the other is pointing to Domain B which has y users. Domain B is a child domain of Domain A, when the job runs to Sync Domain A, Domain B's users also get imported. Is this by design?
    Craig

    Hi Craig,This is probably a sided effect of your user query filter - does it include the sub domain?
    To get around this, you can go down either of two routes:
    a) change your query filter so it doedsn't include Domain B in the Domain A auth source editor
    b) change your Domain A sync type to Partial Users, and choose the subgroups you'd like to have synced to that domain
    The later solution only works if there is no overlap in group membership between domains and domain B has a group that can just be discluded in the partial users sync.
    If you provide some more details on your exact hierarchy, we might be able to give you some more specific solutions.
    Thanks,Akash

  • Import of sub- directories fails with sunopsis SnpFolder does not exist

    INT :
    - Master Rep Id = 0
    - Dev Rep Id = 1
    DEV :
    - Master Id = 0
    - Dev Rep Id = 2
    I try to import a sub-directory with interfaces and one package from one repository (INT) to another one (DEV) with the option Insert or Insert_Update. Both import mode fails with the same error.
    The error message
    I do not want to impont in duplicate mode because in that case the datastore reference in the interface is void. I checked topology and nothing seems wrong to me.
    Have you got any idea what is wrong? thans in advance for your replies
    Edited by: Meapri on May 12, 2011 6:30 AM

    Hi,
    Yes, you need to change your master repository ID.
    When you install ODI, you need to have a unique ID for each repository no matter whether it is a Work Repository or Master Repository. Reason is, ODI creates every object with a uniue sequence number and the last three digits of this objects will be the repository ID.
    FOr example,
    you created a dataserver for the first time, its ID will be 1000 (if master rep ID is 0), second one will be 2000 and so on...
    similalry, in Designer, the very first interface is going to have 1001(work rep id is 1), then 2001 and so on...
    When we migrate from one environment to another environment, there is possibility of overwriting existing objects which corrupts repository.
    Regards,
    kk

  • My proxy service (messaging) with sftp protocol is not picking up the file

    Hi ,
    I have proxy service , which polls for a file in a regular interval , this has stopped working suddenly . The bad part is i am not able to find any log related to the service in either the domain logs or the server logs.
    I tried to disable the service and re-enable it , but it was of no use .
    Please help me in this , what can i look for next ?

    Bala,
    I just extracted the entire B2B setup as a ZIP file and imported the setup in a DEV UT01 enironment. The B2B was able to successfully pick up the B2B messages using the same ftp channel.If from one env B2B is able to pick the message using same settings then it must be a network issue. You may like to change the B2B log level to debug and then try to disable and enable the channel. See if you get anything in the log.
    You may also try to create an outbound agreement and see if you are able to send message to that FTP location from the same environment.
    Regards,
    Anuj

  • Two iPhones with one email account, notes and alerts from separate users show up on each others phones

    My husband and I have always shared a personal email account. We got iPhones a year ago and each set them up to view our shared email. He also has a separate email account for work. Unfortunately, when either of us takes a "note" on the notepad or sets an alert on the calendar, it shows up on the other person's phone. I assume these aps use the email to sync?  Is there a way to manage this so that we can share email but not the other stuff?  We set up separate iCloud accounts with separate apple ID's thinking that would do it but it didn't change anything.

    goto settings>mail,contacts,calenders>accounts and under your shared email account disable notes and calender.
    hope this helps

  • Which epson wireless printer will work with airport extreme (can not find out from epson)

    three systems in use Win 7, Mac lion and vista.  Former epson printer WF 600 would not link with my new airport extreme router despite multiple attempts through epson.  Does anyone know of a wireless printer that will work?  Thanks.

    I had the same problem. It was fixed by running the silly app downloadable from their support page: http://support.lexmark.com/perl/support/support.cgi?ccs=229:1:0:0:0:0
    Here's another way, through CUPS:
    1) http://127.0.0.1:631/
    2) Administration tab
    3) Add Printer
    4) Give Name, Location, and Description (pretty inconsequential)
    5) Select device: Internet Printing Protocol (http)
    6) Device URL: lexnet3://192.168.5.110:1 (the parts in bold must be there, the ip add is probably different)
    7) Make: Lexmark
    8) Model: 3600-4600 series (if this isn't there, you need to get the driver from Lexmark)
    That should do it.
    The printer will be in your system preferences.
    The port number and the "lexnet3://" is the interesting part. Without them, I don't think you'll be able to get it working.
    Good luck
    Message was edited by: swbooth

  • My friend with iphone 4s is not getting messages from my iphone 3gs even tho we both have the new software. everyone else gets our txts but we don't get each others. Help???

    does anyone know how to fix this? it's driving me insane idk what to do!!!
    It hasn't been working for three days now, and i really need it to!
    I also tried taking off my iMessage but nothing changed.
    HELP!!

    My mistake, I read your post too quickly.  I thought you said that you were both getting the same messsages.  Is your friend not getting just your messages or does she not get anyone's messages?  If she's not getting just your messages you might want to try deleting her contact on your phone and creating it again.  Sometimes that will clear things up.  Also, obviously the contact must match the number she receives messages at.

  • Front row (with itunes 10) does not show moves from shared library

    I have two computers. My office computer contains all of my iTunes content, running iTunes 10. I have a mac mini connected to my television, and my intent is to use Front Row to access the shared library from the office computer. The problem is, when using front Row only a small number of my TV shows and none of my movies appear. I have checked the sharing settings on the source computer.

    Exact same problem here.
    It has been working fine doing this for years, then around a month ago after no changes to either machine that I know of, about half the content vanished when viewing a shared library.
    I seem to have also worsened the issue by trashing and rebuilding the iTunes library from scratch. Since at least before doing this I had some of my Movies and TV shows show, but not all, now I seem to have a tiny amount of movies and none of the TV shows listed.
    Checking on the source computer in front row shows all of them present as expected. Completely baffled by this. None of them are showing under odd sections (Say in Music rather than TV Shows) either so I know the meta-data isn't at fault.

  • Automatic status heritage from parent item to child item in Instal Base R12

    Hi,
    Do you know please how to deactive automatic heritage of status from parent item to all child items of instal base when updating parent item status in R12?
    When I update status of package in Instal Base, statuses of all child items are updated automatically with same value.
    I am using R12 standard API's and I don't see any parameter that can help ...
    Must I see the Ebs parameters ? Profile options?
    Thx

    Did you check if the serial ABN656 is the parent and has child components under it? Check the below query for the same. Additionally you can also navigate to Oracle Installed Base Agent User responsibility, search for ABN656, click on the record, navigate to Configuration tab and see if this serial has any child components.
    select *
    from csi_ii_relationships cir
    ,csi_item_instances cii
    where cii.serial_number = 'ABN656'
    and cii.instance_id = cir.object_id
    Thanks
    Shree

Maybe you are looking for