Import CinemaDNG (Blackmagic) into AE @ wrong FPS

Hi There,
When I import a clip (Cinema DNG sequence) After Effects interprets the footage at 30fps instead of the 23.976 that it was shot at. I have to manually change each clip's fps. Am I doing something wrong or is this a bug?
Also, I've filed a bug report for a related issue, but when I import a Premiere Pro Project or XML from Premiere Pro AE imports a single still frame instead of interpreting it as a clip. I've tried replacing the footage via 'replace footage' function but the timecode doesn't match up. (The related bug report is that 'replace with after effects comp' function does not work with CinemaDNG sequences from the Blackmagic cameras)
Thanks,
Randy

> When I import a clip (Cinema DNG sequence) After Effects interprets the footage at 30fps instead of the 23.976 that it was shot at. I have to manually change each clip's fps. Am I doing something wrong or is this a bug?
It is normal to need to specify a framerate for an image sequence.
You can set a new default framerate for image sequences of a certain type by modifying the interpretation rules:
After Effects Help | Importing and interpreting footage items

Similar Messages

After Mavericks Install, Mail has imported all mails into the wrong folders

Anyway to fix this without manually going through each and every email? I have over 6 years worth of email and now all the new mails, sent mails, spam mails have ended up getting filed away into "ALL MAILS."
It took two days to for Mail to upgrade and now it looks like it did a bad job. Any advice?

Hi Eric. Thanks for your response.
1. All the non-archived sub-folders already appeared under “On My Mac,” so they weren't hidden.
2. A restart helped, in fact. I first made a copy of the entire Library>Mail folder so I would still have all the .mbox content. Upon restart, Mail automatically created its own Archive. Fortunately, it contained all the subfolders in the manually created Archive mailbox that had disappeared. Apple apparently reserves the term "Archive" for its own use in Mail. I found another thread that arrives at the same conclusion and suggests a fix for a related problem: Re: Deleted my 'On my Mac' folder in Archived mail after Mountain Lion OS X update - all mail lost - how to retrieve?
3. I believe the answer to #3 is yes; she'll need to drag her non-archived subfolders to Apple's newly created Archive from now on.
4. I copied them along with the Library>Mail folder, so I'll have them if I need them.
Thanks again for your suggestions.

Since updating iTunes and Mavericks, every time I import m4v files into iTunes it renames all the files to "Avidemux". what's gone wrong?

Since updating iTunes and Mavericks, every time I import m4v files into iTunes it re-names all the files to "Avidemux". what's gone wrong?

(By the way, would I need to use also the red and white phono cables also to get sound?)
Yes, S-video cables do not carry sound.
When you import 16:9 into DV Widescreen, make sure that you have UNchecked 'automatic letterboxing'.
In Preferences, is the project set to the correct standard?
29.95 fps = NTSC
25 fps = PAL.
BTW, this is actually the iMovie 5 forum, but no matter!

TS1387 I am importing CD's into iTunes. There were 3 different selection for the CD I put in and I accidently selected the wrong one, Now how do I change it? It seems to only recognize it as the wrong CD now.

I am importing CD's into iTunes. The CD that I put in had the option of 3 different CD's and I accidentally chose the wrong CD name. Is there a way to change it? It now seems to only recognize that CD as the wrong one.

Trevor,
When you say your superdrive rips, the import speeds are typically around 20x, what encoding method and bit rate are you using ?
I imported another CD and watched for what import speed numbers were displayed. Routinely, they hovered around 8x and sometimes up to 12 or 13x, but never higher. I was told by someone at our local user's group meeting that ripping at AAC 192kbps was a double-pass, I think that was the words they used, and therefore slower. ( Many members thought 7 minutes to rip was typical ) I'm not so sure if that means the drive will only spin at half it's rated max speed ? Anyway, I walked over to my son's PC with the CD and ripped it at AAC 192kbps to his iTunes library. The numbers I saw were from 18x to frequently 23, 24 and sometimes briefly to about 26x. His drive has a max of 40x. By my reasoning, anything that would cause iTunes to rip this CD at a slower speed, whether due to the encoding rate or the CD's surface condition, should affect both computers equally, yes ? Yet the drive on the PC performed on average at twice the rate of the iMac. I think it's safe to say the rip speed is comfortably within the operating margins of both drives.
I'm not yet fully convinced this is normal for an iMac. My CD are in excellent shape. I'm the only one who uses them and I handle them with about as much care as the old audiofiles used to when they handled their vinyl LPs ( well, at least not as far as wearing cotton gloves and sweeping the dust off ). Most of them have absolutely no visible scratches or oily finger prints on their surfaces. I might experiment and see what rates I get if I use MP3 or a lower bit rate for AAC.
Bill

How do I import Canon HD footage shot @ 30 fps into FCP?

Greetings all -- have Canon HD footage shot at 30 fps, not realizing Sony equipment can't "read" it and when I tried hooking the camera directly up to the computer to import the footage into FCP, FCP does not recognize the camera (No Communication). Anyone who can help with what settings I should use, etc.? I would be most grateful! Thank you....

Use HDV FireWire Basic as a device control setting in FCP.. might also help to read this: http://docs.info.apple.com/article.html?artnum=302407
Jerry

Importing a video into iMovie

I have a Sony SLT-A33 DSLR camera and I am having a problem with importing video files into iMovie. The camera records in two different formats 1920x1080 50i AVCHD and 1440x1080 25p MP4. I have heard that using 1440x1080 with 25 fps progressive MP4 will give better results so i filmed around 10 mins and when i plugged my memory card into MBPR iMovie did not find any importable files.
I then used a different memory card to check if something is wrong with card but iMovie found nothing again, however when recorded in AVCHD 1920x1080 50i iMovie can import.
I also have Aperture 3.4.4 installed and it recognised the MP4 files and imported them into Aperture library. I could then access the MP4 file through Aperture library in iMovie but the playback is very laggish and editing is almost not possible.
Could you advise me on what format I should use?
1920x1080 50i (interlaced) 25fps
1440x1080 (progressive) 25fps with pixel ratio of (1x1.333)
How can i import the files into iMovie for editing?
I was also looking at FPCX but being a bit pricey, I decided not to get it. Should I invest in FPCX?
I am using Macbook Pro Retina (Mid 20120
i7 2.3GHz - 3.3Ghz Turbo Boost
8GB 1600MHz Ram
Nvidia GT650M 1GB
256GB Apple SSD
Mountain Lion (10.8.3)
All softwares are fully updated.
Thanks

I don't have your camera, but this is worth a try...
Try importing your MP4 files by using FILE/IMPORT MOVIE... and navigate to your camera card to select the MP4 files.

Whenever i import a clip into imovie i get interference

I've tried numerous times importing a clip into imovie that plays fine on quicktime with no interference but as soon as i imported into imovie there is awful interference. I tried switching my phone off and reimporting it but that didn't work. I have a tv that uses a portable aerial does that cause interference? I would be really glad if you could help me.

Hi
Can this be a setting in Your Camera ?
I NEVER use any of the Camera functions - so that I have an as Clean original to start from and then I can add whatever effect later. If I go wrong I have a Clean original to re-start from.
.mov - are no Video-Codec - it is a container (sort of folder) and can hold just about anything good or bad.
Open the .mov file with QuickTime-player
Open Inspector [cmd+I]
Read Video format (codec) : nnnnnnnnnnnnnnnnn
Frames per second : YY.yy fps
What does they read ?
Yours Bengt W

I have been trying to import VHS video into iMovie via a Hollywood Dazzle bridge. Did not have trouble until I upgraded to mavericks. I have a mac book pro, 10.9.1, iMovie 10.0.2. Says it is recording, but when I go to check, it says the file is empty.

I have been trying import VHS video into iMovie via a Hollywood Dazzle bridge. I have been successful doing this in the past, but now it is not working. I have a mac book pro, 10.9.1, (mavericks), iMovie 10.0.2. Everything in iMovie looks like it is working. It reads "recording" in the upper left hand corner of the pane while the video is playing. When I stop the process to check on my clip it says that the file is empty. The only thing that has changed since I did it successfully is that I upgraded to mavericks from whatever I had previously. My system is about one year old. Any suggestions?

Hey, Clinton,
     Thanks for your help! I was able to go to iMovie 9.0.9 and import video. I was still curious as to why it didn't work in version 10.0.2, so I contacted Apple tech support. They were't sure at first as to why it wouldn't work, so they had me delete iMovie 10.0.2 and then re-install it just to see if something had gone wrong when it upgraded. That didn't change anything. In the end, they determined that 10.0.2 doesn't support the Hollywood Dazzle DV bridge. But I have a workaround path from them that I will share so that it's possible to import to 9.0.9, then move it to 10.0.2.
     1. Open iMovie 9 (finder/applications/iMovie 9.0.9
     2. Import from Dazzle Bridge to iMovie 9, note which event you are importing the clips into
     3. Close iMovie 9
     4. Open iMovie 10 (probably in the dock)
     5. File/Import Media...navigate to home(this was my name, on the left side of iMovie, under Favorites)/Movies/iMovie events. Find the event folder that contains your Dazzle clips (tip-try sorting by date modified to look at recent events.)
     6. Select the clips and import. Click the blue "Import Selected" button on the bottom right.
You may get a message that some files cannot be imported. Click continue import. It's a little glitchy. It imports your clip, and also makes a copy of it, too. On the copy, the audio is normal, but the video is choppy. In any case, you would delete the copy, anyway.
Hope this additional information helps somebody else. Thanks again, Clinton for helping me!

Importing 3GP Files into a Final Cut Timeline

I'm trying to import 3GP files from a cell phone video camera into Final Cut to edit. I've read that it can be done, but I'm having difficulties setting the correct presets in FCP.
When I import a clip into FCP I get the following settings in the clip window:
FRAME SIZE: 352 x 288
Vid Rate: 10 fps
Compressor: H.263
Aud Rate: 8.0 KHZ
That said, I cannot replicate these settings when I try to set the "Sequence Settings" and therefore, the clip does not appear in the timeline when I drag it down. Is there a preset for using this file format? Is there an easier way to do this?
Thank you in advance for your help.

as your mobile phone footage is a non standard tv format, you really need to start off with a proper sequence setting, SD PAL, SD NTSC 4:3 then import your footage into the browser, drop it onto the timeline and let fcp auto conform to the sequence. You could also look at compressor to convert it to the right frame size, or use mpeg streamclip to turn the footage into DV QT movie
but as the mobile footage is small and highly compressed @10 frames a sec it is never going to look great anyway

How do I import a .PDF into inDesign?

How do I import a .PDF into inDesign? Does anybody know how? I need to edit a book in inDesign that is a .PDF. So if anyone know how to do that please tell me.

Bob, Peter, grmg, many thanks for your very helpful comments. Delighted mac/pc not relevant. Will scratch that from list of herrings to chase.
Re PDFs - actually, I'm working in Acrobat (not just a finalized PDF), and Acrobat does of course allow editing of a sort; I'd concluded that since Adobe is willing to tolerate that degree of editing with its product, it should therefore tolerate moving its native format (*.pdf) into another of its own native formats (*.indd). I see that's a misconception.
This morning I tried all flavors I could find of getting my Acrobatted content into ID3, including copy/paste, place, and import (from the ID side); none was satisfactory. Output from Acrobat to Word and then placing Word was fine for English but destroyed the Greek - not just wrong font, but complete gobbledygook and loss of all diacriticals. Names of fonts don't matter for my purposes; the legibility of the English, and the legibility and tonic accuracy of the Greek do matter. Author of this project is not tech-savvy and is using old Greek system as well; nothing he or i can do to fix that.
Current plan is to request author to provide me his native files, which will be Mac files. Am I understanding the Import dialog and your collecitve comments to suggest that with that file resident on my PC (and unopened), I can use the Place dialog, with "Show Options" selected, to get the Mac file into ID?
Chapeaux to those of you with constructive comments - hugely appreciated.
YC

Suddenly can't import any photos into iPhoto!

Suddenly and inexplicably, I cant import any photos into my iPhoto program. iPhoto has worked fine for years. Now, all of a sudden, no matter how I try to import them (either from my desktop, or from my digital camera), I get the error message: Couldn't create: /Volumes/name of external drive/iPhoto Library/2006/08/21/name of photo. When I click "OK" on the error message dialogue box, I then get the error message "Unreadable files: 1 The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data)." I am reasonably certain that of the 250 or so J-Peg photos I'm presently trying to import, from 2 different cameras, ALL of them can't be corrupt.
First, I tried repairing my disk permissions on my G4. Then, I tried reinstalling iLife 5.0.2. Then I tried reinstalling the OSX 10.3.9 combo pack, and iPhoto 5.0.4. Then I tried again repairing my disk permissions with disk utility. All proved useless to solve the problem.
I also tried dragging my iPhoto preferences to the trash. But I found to my horror that this action completely obliterates all of my iPhoto albums and photo groupings. I did not attempt to import any new photos once I discovered this, as I was fearful doing so might render my loss of my albums permanent. So I retrieved my old preferences from the trash, thus saving my albums and groupings, but also keeping the original importing problem.
What can I do to fix this importing problem without obliterating my albums and groupings? Lots of work has gone into the grouping and categorizing of my albums and photos. Though it would be easy to reimport all of my photos, I would not want to begin to take the time to recreate all of my albums and groupings from scratch. Is there any way these groupings can be preserved? If not, there should be! It's idiotic to think that Apple might not consider all of the time the grouping of albums and songlists represents to the typical user of iPhoto or iTunes.
Any help you can give would be greatly appreciated. Cheers!
Powerbook G4 (2002) Mac OS X (10.3.9) iPhoto 5.0.4
Powerbook G4 (2002) Mac OS X (10.3.9)
Powerbook G4 (2002) Mac OS X (10.3.9)

I've found a solution to this problem, thankfully. But it didn't come via rebuilding the iPhoto library.
I didn't want to to a manual rebuild of my original iPhoto library, since I was cautioned that it would involve losing my albums and all notations and filings I'd made concerning my photos. Before I first tinkered with the library, I made a backup copy of the original-defective library onto another external drive. Then I did one more complete "automatic rebuild" of the original/defective library, and found to my horror that the library wouldn't even open any more. It would send up an error message when I'd try to click on it's icon to open the library.
I went back to the backup copy of my iPhoto library (containing all of my albums, groupings, and etc.) and did what I hadn't thought to do in the first place: I simply attempted to import photos (my original difficulty) into this backup iPhoto library. It worked perfectly!!! All photos imported into this backed up copy as if it were the original. And now that I have trashed my "original" and totally defective former iPhoto library, this backup copy is now my new iPhoto library.
I guess whatever was wrong with the old library was shaken out just by making a backup copy. I'm afraid that's about as technical an explanation as I can offer. But maybe doing the same process will help another of you suffering from a similar problem with importing photos. Anyway, a hearty thanks to everyone who responded to this original query of mine. Mac users are truly the best!!! Cheers!

When I import a folder into my library, music starts playing and I can't stop it.

So, I haven't used iTunes in years.
I'm just wondering if this is the same for everyone, of if I've just done something wrong.
Brand new install of the latest version of iTunes (11.3.1) - Open it up, use the "Import folder" option to import a folder into my library.
It's a large (over 200gb) folder.
As it's importing, for some reason, iTunes starts to play the first few seconds of each album that gets imported.
But, because the "Importing.." dialogue window is open, I can't hit "pause" or "stop".
So, my computer is just sitting here playing the first few seconds of many many songs whilst importing. I can turn down the volume to stop it, but I'm just wondering -
Is this normal? Seems a little odd and strange.

Generally setting a common Album Artist will fix things.
For deeper problems see Grouping tracks into albums.
tt2

Importing Word doc into Previously Existing Project Corrupts Related Topics

Hi,
I had a few extra topics that I documented in a Word document
and imported that document into an existing HTML Help project in
RoboHelp. After doing this, it used the CSS file called by the new
folder it added for those new topics (based on the name of the
imported word doc) and when I look at topics in WYSIWIG, the text
on them is Design_Time Con. (I used the text only style of related
topics). When I select the related topic button in WYSIWIG and view
the popup, the menu choice for properties is deactivated so I can't
even edit the topics in them. And, when I try to add a new related
topic, it looks the same "corrupted" way.
What am I going to do? Is there are project setting that is
pointing to the wrong directory? What can I do to save my related
topics. I have over 400 topics all with related topics buttons and
each has an average of 6-8 related topics listed.

P.S. I also tried creating a new project and importing the
htm files into it but it is doing the same thing.
Here is the code for the Related Topics in one of the topics
as a sample:
<OBJECT
CLASSID="clsid:ADB880A6-D8FF-11CF-9377-00AA003B7A11"
ID="RelatedTopics" TYPE="application/x-oleobject" >
<PARAM NAME="Command" VALUE="Related Topics,MENU">
<PARAM NAME="Font" VALUE="Arial,8,0,,">
<PARAM NAME="Item1" VALUE="About the Main Work Pick
Window;About_the_Main_Work_Pick_Window.htm">
<PARAM NAME="Item2" VALUE="About the Picking Employees
Grid;About_the_Picking_Employees_Grid.htm">
<PARAM NAME="Item3" VALUE="Adding a Part-Time Employee
Pick;Adding_a_Part_Time_Employee_Pick.htm">
<PARAM NAME="Item4" VALUE="Adding a Work
Pick;Adding_a_Work_Pick.htm">
<PARAM NAME="Item5" VALUE="Changing the Employee Pick
Order;Changing_the_Employee_Pick_Order.htm">
<PARAM NAME="Item6" VALUE="Choosing the List of Picking
Employees;Choosing_the_List_of_Picking_Employees.htm">
<PARAM NAME="Item7" VALUE="Defining the Main Pick
Information;Defining_the_Main_Pick_Information.htm">
<PARAM NAME="Item8" VALUE="Pick Status
Codes;Pick_Status_Codes.htm">
<PARAM NAME="Item9" VALUE="Picking Extra
Work;Picking_Extra_Work.htm">
<PARAM NAME="Item10" VALUE="Picking Special
Days;Picking_Special_Days.htm">
<PARAM NAME="Item11" VALUE="Reviewing Master List
Positions;Reviewing_Master_List_Positions.htm">
<PARAM NAME="Item12" VALUE="Saving the
Pick;Saving_the_Pick.htm">
<PARAM NAME="Item13" VALUE="Selecting an Employee and
Beginning the
Pick;Selecting_an_Employee_and_Beginning_the_Pick.htm">
<PARAM NAME="Item14" VALUE="Selecting Imported
Rosters;Selecting_Imported_Rosters.htm">
<PARAM NAME="Text" VALUE="Text: Related Topics">
</OBJECT>

Problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007

Gentlemen,
I have a problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007,
My current Support Package Level is:
SAP_ABA      700     0015
SAP_BASIS     700     0015
PI_BASIS      2006_1_700     0006
ST-PI     2005_1_700     0006
CRMUIF         600     0003
SAP_BW      700     0017
SAP_AP                700     0012
BBPCRM                600     0002
First I had the following error:
   Syslog: k CQ3 : UMGSETTING&                                          rscpexcc 12
   GetDBMigrateCodePagesLangs uses TCP0D, TCPDB, TCP0C.
     0 entries from FUNCT (%/SAPCND/CNF_GET_RECORD_FROM_DB%) deleted.
     0 d /   0 i /   0 u /   6 = 100% ucf FUPARAREF
     6 entries for FUPARAREF imported (/SAPCND/CNF_GET_RECORD_FROM_DBA*).
     0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
     0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
     0 d /   0 i /   0 u /   1 = 100% ucf TFTIT
     1 entry for TFTIT imported (D/SAPCND/CNF_GET_RECORD_FROM_DB*).
   successfully set a temporary lock on table REPOSRC
   REPOS /SAPCND/LDETERMINATION$14                A replaced.
   REPOS /SAPCND/LDETERMINATIONU14                A replaced.
    [dev trc     ,00000] Wed Nov 26 16:33:14 2008                         1315447 8.171484
    [dbdsoci.    ,00000] *** ERROR => invalid offset 0 for placeholder 16
                                                                                71 8.171555
   unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,
   dsql_open returned with unexpected error code 2
   Please contact the SAP support.
   End of Transport (0016).
   date&time: 26.11.2008 - 16:33:14
   5 warnings occured.
   3 errors occured.
   Main import
   End date and time : 20081126163314
   Ended with return code: ===> 16 <===
After I got this error I upgraded the Kernel from patch level 159 to 179,
After that I restarted the update again but the system is still running on u201CIMPORT_PROPERu201D and dose not given any update,
From Import logs of the queue I can see the following,
   Summary:
    24 DOCUT imported.
    16 DYNPS imported.
    30 DYNPT imported.
   387 REPOS imported.
    43 REPOT imported.
   Totally 505 Objects imported.
   Totally 3636 tabentries deleted.
   Totally 14 objects activated.
   Totally 12229 tabentries imported.
   62066888 bytes modified in database.
    [dev trc     ,00000] Wed Nov 26 18:14:19 2008                         20996974 40.917838
    [dev trc     ,00000] Disconnecting from ALL connections:                   30 40.917868
    [dev trc     ,00000] Disconnecting from connection 0 ...                  287 40.918155
    [dev trc     ,00000] Closing user session (con_hdl=0,svchp=00000000003005B8,usrhp=00000000002FB748)
                                                                              5759 40.923914
    [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=00000000003005B8,srvhp=00000000061530E8)
                                                                                921 40.924835
    [dev trc     ,00000] Now I'm disconnected from ORACLE                    8230 40.933065
    [dev trc     ,00000] Disconnected from connection 0                        90 40.933155
    [dev trc     ,00000] statistics db_con_commit (com_total=527, com_tx=307)
                                                                                59 40.933214
    [dev trc     ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0)
                                                                                52 40.933266
   Disconnected from database.
   End of Transport (0004).
   date&time: 26.11.2008 - 18:14:19
   2 warnings occured.
   Main import
   End date and time : 20081126181419
   Ended with return code: ===> 4 <===
Please advice me.
Regards,
Ahmed

I have similar problem while updating support packages in SAP R/3 4.6C environment.
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
Here is an outline of series of events that happened:-
We are applying in support packages in SAP R/3 4.6C HR Development
(TFI) environment. We planned with installing all the SP stacks
starting from 1 to 9.
-Updated kernel, tp , r3trans and SPAM level to latest level.
We received the following error in Import_Proper step of Support
package upgrade. Though the step has been repeated after making sure
that we have all the required files at OS level, we go this error
repeatedly.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Main import
End date and time : 20081205192603
Ended with return code: ===> 16 <===
When we renamed Co-File & data_file at OS level to see if the files are
created again and reran we got the following error.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.24 46D
Main import
End date and time : 20081205185117
Ended with return code: ===> 12 <===
We tried importing the individual support package SAPKB46C52 from STMS
and the transport cancelled at an earlier step with the same error.
Dictionary import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Dictionary import
End date and time : 20081205195929
Ended with return code: ===> 16 <===
While playing around I have deleted the transport from the tp buffer
and added manually, before doing so I made a backup of tp buffer at OS
level and I got following error though I reverted back to backed-up
copy.
- Error in phase: IMPORT_PROPER
- Reason for error: TP_BUFFER_INCONSISTENCY
- Return code: 0008
- Error message: Wrong sequence of Packages in the tp buffer (e.g.
SAPKB46C52 )
I then tried to disassemble the package separately and reran the
import queue. Now I have RC 8 on that support package.
When I did R3trans -l on the datafile it completed successfully.
D:\>R3trans -l \usr\sap\trans\data\RB46C52.SAP
This is R3trans version 6.05 (release 46D - 27.10.08 - 16:32:00).
R3trans finished (0000).
I verified the size of file "CSR0120031469_0023301.PAT" and it is the
same as mentioned in SSP.
Let us know is there is a workaround.

Can't import a CD into iTunes 7.5

Wow, just tried to import a CD into iTunes 7.5 andam completely unable to do it. I tried dragging and dropping, I tried clicking "Import" in the drop-down menu under "File," and nothing seems to work. In my old version of iTunes there was a big obvious button signifying "import." Now I don't know how to do it. Is this simply operator error (me not knowing the command) or is something wrong with my iTunes installation? Appreciating any advice. Thanks.

You seen these?
http://docs.info.apple.com/article.html?artnum=93079
http://docs.info.apple.com/article.html?artnum=301509
http://docs.info.apple.com/article.html?artnum=304707
http://docs.info.apple.com/article.html?artnum=93453

Import CinemaDNG (Blackmagic) into AE @ wrong FPS

Similar Messages

Maybe you are looking for