Import container contains errors (are any obligatory elements missing?)

Hi all,
i get this struggling error message when i try to start my work flow (WS10001004) out of the web ui from CRM 2007. I try to start this work flow via an action which is manually scheduled.
I already set the work flow and the task TS10008150 as "General Task".
Is there a possibility of debugging the work flow? Or how is it possible to get more details for this error message?
Thanks for hints!
Regards,
Christian

Hi venu,
I checked the slg1 which is empty or what did you mean with "work flow log"?
Which binding should I check exactly?
The note that was mentioned didn't solve my problem. I have a CRM 2007 System.
Are there any more possibilities to trace / debug a work flow besides the the slg1 and the swel?
Thanks for your answers!
Regards
Christian

Similar Messages

Sending IDOCs to R/3: Error in SXMB_MONI: Obligatory element missing

Hi,
after sending IDOCs to R/3 we saw that we forgot to maintain IDX2.
Know IDX2 is OK. But we get an error IDOC:Obligatory element xyz missing.
This cannot be, because we also send this IDOCs to another R/3 an everything works fine.
I already refreshed the cache.
Any ideas?
Thanks
Regards Mario

Hi Mario,
have you tried deleting the matadat in IDX2 and reloading it.
Regards
Kenny

Lightroom 5 is not showing previous sucessfuly imported images and images are not identified as missing, there are no images shown in the library, how do I reconnect missing images?

lightroom 5 is not showing previous successfully imported images and images are not identified as missing, there are no images shown in the library, how do I reconnect missing images?

If the images are not identified as missing ... then you can't reconnect them
But I'm not really sure what is happening, as I don't understand your description of the problem, could you show us a screen capture? Or describe what appears on your screen in much more detail...

Import Container contains Error

Hi,
when i'm using in QAR, i didnt found any error in PO release strategy. But now, i'm facing the error Import container contains errors (are any obligatory elements missing?). I've checked workflow definition, it doesn't shows any error. And the import parameters are enabled.
If anyone knows what is the problem, kindly let me know what i have to do...

Hi,
check, wether there are some obligatory container elements, wich are not filled when calling the workflow.
The problem may be the data formats of the elements during runtime. If you try to assign elements, wich have different data-types may cause errors during runtime even the definition of the containers reports no problmes.

Import container contains errors issue for Release Strategy workflow

Hello Experts,
I have copied the standard workflow WS20000075 for PO approval on Release step.
the copied workflow works fine in sandbox system, but in the test system I get an error saying 'import container contains errors (are any obligatory elements missing?)' I guess 'ReleaseCode' is not getting passed to the Workflow from the PO creation T-code.
I went thru few SCN post, did check all the Linkages as said, everything seems to be ok. but still cannot trigger the workflow.
need guidance as to where I may be going wrong.
Regards,
Jibran

Hi Jibran
If the WF is working in sandbox, it means that your definition, linkages etc are correct.
Please check if the following note is relevant for you or not:
1770720 - PO workflows run into error SFW_RUN594 - Import container contains errors
It's about correcting the settings in SWEC and SWE2 (correct for your custom workflow definition)
If not, then confirm with your MM consultant if the release strategy is configured correctly or not....take hints from the following SCN thread:
http://scn.sap.com/message/14682486#14682486
Regards,
Modak

Import container contains errors

hi experts
my Obj Type : BUS2012
task :TS20000166
workflow :WS2000075
my workflow for PO is working fine.in outbox one mail which shows no errors in work flow log & everything is fine.
but still am getting error mail in my inbox as
still my workflow is working properly
what will be the efffect for this
Error processing following event linkage:
BUS2012 RELEASESTEPCREATED WS20000075
Following error occurred:
SWF_RUN 594
Message text:
Import container contains errors (are any obligatory elements missing?)
Event container appended as attachment.
Event linkage not changed.
Event stored temporarily.
Events can be redelivered via event queue
administration (transaction SWEQADM).
nani

hi balaji
i did same config for both PR, PO
both are working properly
but for PO only y am getting this message in my inbox
Error processing following event linkage:
BUS2012 RELEASESTEPCREATED WS20000075
Following error occurred:
SWF_RUN 594
Message text:
Import container contains errors (are any obligatory elements missing?)
Event container appended as attachment.
Event linkage not changed.
Event stored temporarily.
Events can be redelivered via event queue
administration (transaction SWEQADM).
nani

XI: idoc 2 file scenario( Contain error in SM58)

Hi experts,
Here i am having one issue. i have done Idoc 2 file scenario...i have created material in R/3 successfully. when i have sent the material to legacy system..Idoc was generated Successfully in r/3 but i haven't seen that message in SXMB_MONI..
i got the error message in SM58 i.e. IDX1 port SAPDE1, Client 220, RFc Destination Contain error.
plz any one can u help me on this....
Regards,
Yadav

Hi Yadav,
The RFC port you defined is not correct in IDX1. The Port name must be in the form of u201CSAPxxxu201D, where xxx is the system ID of the backend SAP system.
Just cross check it.
Check this for more details:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Regards,
Sachin

OMF import fails Code 205 OMFI_ERR: Bento container error

The OMF Export from ProTools fails by importing it into Logic.
This is the message Logic shows:
Code 205 OMFI_ERR: Bento container error
One week ago, it worked with another session, but my currently 2 new sessions don´t.
Any advice?
Martin

yes. export AAF and import that into logic. more reliable but even then it is dicey. the fault lies squarely at logics feet with OMF andAAF implementation.
make sure the exported files are consolidated and uniform sample rates or you will have problems. (i am thinking more of avid exports)

Mapping of element contains errors

Hi experts,
I was doing a complex mapping for creating a Sales Order (Items, ItemsX, ...)
Everything worked fine, I added 2 simple Types to the Data Type xsd file, redeployed and still worked.
Now all of a sudden I can't seem to map anymore, with a problem: "Mapping of element x contains errors".
When I start mapping, either I get an exception (and NullPointerExceptions) that he can't find the root element of my context anymore. Or I just save, and all my mappings dissapear and I get a screen like the screenshot bellow, with broken mappings.
All the failed mappings get the value "TaskOutput".
Another detail is, that when I delete all those broken mappings with the value "TaskOutput".. close and save, the broken mappings appear again.
Tried solving with: creating new .xsd file (same data), created new process, new UI component.
Screenshot of problem
http://i53.tinypic.com/2ykfh3r.png
Screenshot of illegalstate exception (I also get nullPointer sometimes)
http://i56.tinypic.com/1zl68m1.png

just delete old mapping

Items in template contain errors, only correct items are transferred

Hi guys,
When we create SC with items from the old SC the message appears: "Items in template contain errors, only correct items are transferred". I checked SC, there are no error messages. I found that field SOURCE_REL_IND in the table BBP_PDIGP is initial. Can it be the reason of this error message?

Hello
I think the old items from the old SC will be validated, and therefore you got this error message.
I would suggest to uncheck the 'Validate Product Data' (In Additional
Functions in product catalog tab) for the external catalog in the
following path:
spro -> SAP IMG -> Enterprise Buyer -> Master Data ->
Define Catalogs. Select the catalog, and then 'Goto -> Details'
Hope this helps,
Daniel

Infopath cannot submit the form because it contains errors. Errors are marked with either a red asterik(required fields) or a red, dashed border (invalid values)

Infopath cannot submit the form because it contains errors. Errors are marked with either a red asterik(required fields) or a red, dashed border (invalid values).
Press Ctrl+Shift+O for next error or Press Ctrl+Shift+I for error details
Please help me, Thank in advance.
Sravan.

Hi Sravan, this means that one or more of the fields are required to be filled in or have validation set up on them so that the information entered matches a certain criteria. Make sure what's entered matches what's required. If the form still can't be
submitted, check the rules set in InfoPath and the list/library to see what's causing the error(s).
cameron rautmann

Can't open Thunderbird..icud+52.dll is either not designed to run on windows or contains error. extra error msg can't ld xpcom

having lots of problems with TB lately but until today it worked itself out somehow....now today I- can't open it. suddenly after being prompted to update TB I get error messages. 'program files(x86) Mozilla/Thunderbird/ icud+52.dll is either not designed to run on windows or contains error. install again or contact software vendor' then after I click that away get another one 'cannot load xpcom' . I am not very tech savvy with computers but have tried every reasonable thing I trust myself doing. I thought it might have to do with a an outdated Firefox so reinstalled that. I have searched high and low on how to uninstall TB and reinstall again WITHOUT losing any emails...,but none of the answers I found on this question are clear about this so I don't dare to do it yet. I don't have my pop address emails redirected anywhere else (not to webmail) so only access them via TB on my computer. How can I solve this without losing ALL my existing emails and email folders?
thanks in advance.

Hi Chanpuff,
I have a look at my own Windows 8.1 machine, the sqmapi.dll in 'C:\Program Files
(x86)\Windows Portable Devices' is 217KB and in “C:\Program Files \Windows Portable Devices” is 272KB.
If you want to make a modification to the files, it is recommended to make a restore point and backup the important data to reduce the risk of unexpected error.
“Would it be safe to try it out? Or are there other possible solutions?”
The SqmApi.dll is a part of system ,we don`t recommend to try to repair it with a thirty party software. We cannot verify the safety of the software.
I agree with
DonPick, to ensure the safety of the whole system .It is recommended to have a full scan of the whole system.
Best regards

Queue alerts container variables are not getting filled

Hi All,
I am referring this blog to create alerts when message struck in queues
/people/santhosh.kumarv/blog/2009/05/19/sap-xipi-alerts-for-queue-errors
I am able to get the alert when a message struck in Queue of XI. But Container variables are not filled with actual run time values
I have used the report as it is and container variables as described in blog.
I have implemented Alerts for IE & AE alerts, those are looks good as expected.
Please let me know any clue
Regards

Hi,
After investigating all the things i found these
1) We have already Integration Engine & Adapter Engine Alerts configured in landscape with separate alert categories & working fine
2) Now i configured one more alert category for Queue error with the above mentioned Blog
Important thing: is even though if any error occurred on Integration engine, i get 2 alerts. one with Integration Engine alert category description & one more is with Queue alert category description
Reason for this is, for Queue alert category i selected radio button as "No Restriction". because of this if any IE error occurred also queue alert category is also triggering along with Integration engine alert category .
Please let me know is it possible to implement Queue alerts along with the IE & AE type alert categories
Any one implemented IE, AE & Queue alerts in single landscape
Regards
vamsi
Edited by: Vamsi Krishna on Jul 19, 2010 4:53 PM

Sequence contains more than one matching element

Hi
I have checked all threads and none answers my issue.
I am trying to drop a user and am following this blog:
http://sanderstechnology.com/2013/login-and-user-management-in-sql-azure/12826/#.U46Hh_mSweo
Below is a series of screen-shots of the issue. Please assist. Thanks, Mark.
Mark

Hello,
Based on your descritpion, you create a SQL database with WEB edition and try to connect to the MASTER database from Windows Azure Management portal. But it is failed with "Sequence contains more than one matching element" occasionally.
Due to the uncertainty and randomness factors, it requires higher level troubleshooting methods.I suggest you contact Windows Azure support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact if you recevied this error again.
As for drop login, it may caused by the premssion. In SQL databae, only server-level principal login (created by the provisioning process) or the credentials of an existing member of the "loginmanager" database role can manage logins. If you are not use
a server-level principal login, please ask the adminstrator add the login to loginmanager databaserole:
EXEC sp_addrolemember 'loginmanager', 'login-you-used'；
Reference:http://msdn.microsoft.com/en-us/library/azure/ee336235.aspx
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Error: Transaction IDX1: Port SAPRP1, client ,RFC destination contain error

Hi All,
I am faceing the problem while executing the XI ,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPRP1, client , RFC destination contain errors</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Transaction IDX1: Port SAPRP1, client , RFC destination contain errors</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
============
It is showing this error and the idoc is not posting to the SAP. When i checked out the IDX2 i am not getting any such structure of our IDOC type, So do i need to create the structure manually, or will it create automaticallywhen the idocs willposted .
Is there any import and export option for this.
Please treat this as urgent , thanks in advance...

Hi Jay,
how did you create port using IDX1 ,I think you must have to follow the naming convention there.Any user given name might not work.
I think in your case , create port as SAPRP1 using IDX1.
can you you give a try with that.port name exactly same as SAPRP1.
you may also refer this link
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm

Import container contains errors (are any obligatory elements missing?)

Similar Messages

Maybe you are looking for