Import CS3 AVI Footage into CS4

I'm trying to import some footage that I captured on my PC in CS3, into my Mac in CS4. When I open the project that was created in CS3 (PC), on my CS3 (Mac) it comes through fine. But when I convert the project and open it in CS4 (Mac), it wants to render all of the footage in the timeline. Which means the sequence settings aren't matching the footage. Even though the sequence settings are the same as those I used in CS3. Not sure what's going on.
Reason I capture the footage on my PC to begin with is because CS3 and CS4 still will not capture my DVX-100 24p footage correctly on a Mac. So this is my only solution at the time being. I have 34 hours of AVI footage that I'd really like to edit in CS4. Any help would be much appreciated!

Bill, thanks for your response. Sorry for the delay in getting back. The mis-match is precisely what I'm trying to figure out and fix. My sequence presets are as follows:
GENERAL
Editing Mode: Quicktime DV 24p
Timebase: 23.976 frames/second
VIDEO
Frame Size: 720 x 480 (16:9)
Pixel Aspect Ratio: D1/DV NTSC Widescreen 16:9
Fields: No Fields (Progressive Scan)
Display Format: 24fps Timecode
AUDIO
Sample Rate: 4800 Hz
Display Format: Audio Samples
VIDEO PREVIEWS
Preview File Format: Quicktime DV 24p
Codec: DV/NTSC 24p
Max bit depth and Max render quality are NOT checked.
And the clip properties are as follows:
Type: AVI Movie
File Size: 642.8 MB
Image Size: 720 x 480
Pixel Depth: 24
Frame Rate: 29.97 (24p)
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:02:57:16
Average Data Rate: 3.6 MB / second
Pixel Aspect Ratio: 1.2121
QuickTime Details:
Movie contains 1 video track(s), 1 audio track(s) and 0 timecode track(s).
Video:
There are 5330 frames with a duration of 1/29.97th.
Video track 1:
Duration is 0:02:57:16
Average frame rate is 29.98 fps
Video track 1 contains 1 type(s) of video data:
Video data block #1:
Frame Size = 720 x 480
Compressor = DV/DVCPRO - NTSC
Quality = Normal (3.00)
Temporal = Normal (3.00)
Not sure why the properties show that the clip is 29.97fps, becuase when I single click a clip it shows up as 23.976 up above. Any advice would be MUCH appreciated!

Similar Messages

Can no longer import mp4 (XDCAM) footage into CS4

Hopefully somebody will be able to help me with this!
I am trying to import some Sony EX1 (mp4) footage into Premiere CS4, but am getting the following error message:
“file import failure: Error message – the importer reported a generic error”
I have done this process on many occasions over the last year or so and experienced no problems whatsover.
But for some reason I am no longer able to import the mp4 files...or even access these file types in historic projects!
I have checked the footage in the Sony clip browser in it seems fine, and plays fine when opened with a VLC player, so am a bit stumped to what the problem could be.
(For info, I am using a PC with 8gb RAM and a Quadro CX. I did have After Effects installed a month ago back and switched to VISTA. All Adobe updates have been installed, and I have sufficient memory)
Thanks in advance for any pointers or assistance

Of course using Premiere CS3 I have the problem of the audio constantly cutting out on the XDCAM MP4 files, so I really could do with a solution to this problem in CS4 asap - can anyone else help?
It is definitely a new problem for me, which almost certainly revolves around the impoter process. It did not affect my editing until 2-3 months ago but suddenly now renders CS4 Premiere more or less useless, on both on my laptop and my main PC.
It is possible that the problem only affects projects where one of the XDCAM files is very long and/or was originally saved across two separate cards at the time of recording. In which case it may not be a new problem, simply one I had not encountered before because I'd notg used any such long files.

How to import 30p 1920x1080 footage into cs4

Hi,
I shot some footage using my canon hf20 in 30p, at 1920x1080. when i open a new sequence i don't see a setting for 1920x1080 30p under AVCHD.
at first i was going to use the XDCAM HD preset since it's the only one i see that has 30p, but i realized that it's 1440x1080, not 1920x1080.
how else to import 30p 1920x1080 into premiere CS4?
1) will the 1080i30 (60i) setting preserve the 30p progressive footage (even though the option is listed in premiere pro under 1080 interlaced)?
2) or is the only way to edit 30p progressive at 1920x1080 is to select the AVCHD 1080p 24p setting and change the frame rate to 29.97?
3) or is there some other trick altogether?
thanks.

thanks for the replies. so does the 1080i30 (60i) setting do some kind of de-interlacing on 30p footage, even if it's not native and it's wrapped in 60i (like it is in the canon hf20)? or does the camera do that automatically?

Importing RED camera footage into CS4

I've downloaded a plug in for CS4 and all the other RED camera footage imported in fine (9 out of 10 files) expect for the last file. Here's a picture of the file names:
When I try to import these files (either through file > import) or Media Browser I get the message that the file format is not supported. Does anybody have any idea of what I could do?
Thanks!

Robodog2,
I finally got back to my office and was able to send JIm a screenshot of the issue as the file was too big to send (1GB).
The file marked A010_C001_10172V_001.R3D is the one that should import into Premiere Cs4 but as you can tell from the screen shot above, it will not.
Any help will be appreciated.
-Dave

Importing HD (AVCHD) Footage into Premiere Pro CS3 (windows)

Hi guy's the question is pretty much in the title.
Is it possible to import HD (AVCHD) footage into Premiere (with or without aditional software)?
Thanks.

What I can't figure out is why such a major format does not have native support in in Premiere CS3.
http://en.wikipedia.org/wiki/AVCHD
This is a format that has been adopted by Sony and Panasonic and is compatible with most blue-ray players and even the Play Station 3. So why would so many of the small software companies, in competition with Adobe, have recognized the importance of the format and come up with solutions to read and edit the format when Adobe has not?
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403297&sliceId=2
I've been coming back to Adobe's web site for months hoping to find they are working on a solution and I have found nothing. I have been a huge fan of Adobe software for years and have pumped many a pay check in keeping my Adobe software current, the most recent being the purchase of the CS3 Master Suite. I'm not trying to bash the company but Adobe if your listening I really want to know want to know what the real story is. This goes beyond the "we are just busy and will get to it when can" statements I have been seeing on the adobe sites. It looks to me as though some other deal has been made and Adobe does not want to talk about why they are not incorporating the AVCHD format into Premiere CS3.

How can I import a .AVI file into my project?

I want to import a .AVI file into my video project but Final Cut Pro will not import it. Final Cut says the file is not recognized but it plays with Quicktime.

Jamison S wrote:
DJ OZA,
Do you get the warning "Media files are not optimized for FCP. Either recapture the media or use Media Manager to crate new copies of the files to improve performance for multi-stream playback."?
What does this mean?
I can import and edit the files no problem either, except for that waring, which concerns me.
It means you will not be able to use the multiclip feature with these files because your Macintosh is working very hard to decode them on the fly. More than one stream will choke your machine.
Your AVIs are visible in FCP because you happen to have acquired an AVI file that uses a codec you have available on your machine.
AVI isn't even supported by Microsoft; it's been a totally concatenated delivery wrapper for more than a decade. It only survives because of entrenchment.
Use Get INfo on one of your AVI clips, figure out what codec was used, use Google to find out what you can about the codec, and decide how you want to proceed. You want to determine what your output is going to be and work backwards from that decision. For instance, if you're going to distribute a standard MPEG2 DVD, you want to edit using conventional DV. Transcode you AVI files to DV using Compressor.
Your easiest solution will be to edit on a PC that does handles the AVI natively or to contact whoever gae you the files and demand they provide you with clips you can edit on a Macintosh.
bogiesan
Message was edited by: David Bogie Chq-1

Porblems importing Canon C300 footage into Premiere Pro CC 2014: only import 30 seconds

Hi! I'm having problems importing Canon C300 footage into Adobe Premiere Pro 2014. I'm taking the files directly from the media browser to I can only import the first 30 seconds of each clip.
Why can be that? Do I need a specific plugin?
Thaks for your help
Begoña
editor

Since you did not perform the copy process yourself, my thinking is that maybe something went wrong when it was done. Far too many people don't understand or follow the process that works.
My recommendation would be to get your hands on the cards and do it again, making sure to use only Explorer or Finder for the task.

How do I import hd 24p footage into premiere pro? Help please

How do I import hd 24p footage into premiere pro? Help please

instructions for importing/capturing footage:
"Capturing DV and HDV video"
"Importing with the Import commands"
"Importing with the Media Browser"
Since you're new to Premiere Pro, I recommend starting here:
FAQ: How do I learn Premiere Pro?

How do i import a .avi file into itunes

i am trying to import videos i've taken on my digital camera (canon powershot sd400) onto my ipod.
problem i'm encountering is when i try and import the .avi file into itunes, it says that "the file cannot be imported because it does not appear to be a valid exported file."
any thoughts / suggestions?
thanks

GUIDES TO: Converting Video for iPod - Mac & Window
http://forums.ilounge.com/showthread.php?s=&threadid=123067
Patrick

Canon IXUS 950 won't import large AVI files into iPhoto

The new canon Ixus 950 IS wont import large (over 50mb) AVI files in iPhoto, why not?
They sit on the SD card and then sometimes subsequent pics and video's don't upload.
If there are say, 3 x 40mb files they dont upload either... After waiting ages the box pops up, unable to import.
I can individually import the AVI files under 50mb
I also note that the hard drive icon for the camera does not appear on the desktop or the finder so I could not 'drag' them in either...
Any ideas?
David

I have a similar problem with importing large AVIs from my Canon A610. iPhoto would import everything else (usually) except the large AVIs, which it claims is unreadable. In this particular case (~470MB file), it plays in QuickTime, I've resaved it using QT (still won't import) and converted it from MJPEG to Cinepak (still won't import). I'm now considering cutting the AVI up into smaller chunks and importing those... but any other options before that?
Misc computer details: Main HD is 120GB with 30 for Boot Camp, 80 remains for Mac OS X, but the iPhoto Library is on an external HD (also 120GB, same model as internal HD except not SATA) formatted to FAT32. Would 10.4.11 make a difference here?

When I upload/import a .AVI video into MPEG Streamclip, I lose the audio.

Whenever I upload a .AVI video into MPEG Streamclip, I lose the audio. The video plays fine in Quicktime but when I upload into MPEG Streamclip, the audio is replaced with some "clicking" sounds. Can someone please help me resolve this and fix it so that my audio gets imported as well? By the way, this is a problem that is only with .AVI files. When I try importing MP4 videos, they work fine and the audio gets imported as well. I need to resolve this so that I can convert my videos from .AVI to DV format with the sound. Thanks!

Basically you can only add a video file to Itunes if it is either MP4 or the other supported format h2.. <---- i forget what its called i had this problem when i first plugged my i-pod in and got extremely aggitated until i realised and sorted it
that said i dont therefore understand the convert for i-pod button when the only video files able to be added are already in ipod compatible format? doesnt make sense to me but then maybe im missing something i mean i am a nOOb!

After Effects CS3 / Mac OSX 10.5.4 / iMac / Importing CS3 Indesign file into CS3 After Effects

Hi,
I'm wanting to import a CS3 Indesign file into a CS3 After Effects file including all the layers. Is there a simpler way than importing it into Illustrator then dividing the layers then importing into After Effects?
Thanks
Will

Nope, not that I'm aware. Unfortunately AE does flatten layered PDFs, so that second option wouldn't work, either. It should however be possible to spit out each layer as a separate PDF from InDesign with a little work. Perhaps even someone already has created an extension/ command set for this, so I'd ask on the ID forums.
Mylenium

Is it possible to import an avi file into iTunes?

I am trying to import in a TV show that i have downloaded as an avi file into iTunes. However when i try to import it nothing happens, if i try and change the file format into a mp4 it wont recognize it. Does anyone have any ideas?
I can not find it in any other file format anywhere online.
Any help would be appreciated.
Thank you

Export the OMF from an audio app like ProTools or Logic as a stereo pair AIFF, then use that with your video. Chop it up if you need to checkerboard.
Of course this will only work if the audio is very simple - overlapping audio will mess you up. If you can figure out the audio app part, you can split up your OMF into separate tracks.
But then if you can't get it into an audio app, you're a bit hosed.

Importing Canon C300 footage into FCPX

So I shot about 100GB worth of footage on a C300. Now, when I go to import the footage into FCPX, I get the message "None of the selected files or folders can be imported. Change the selection and try again."
I've read in other threads that FCPX directly supports MXF files, and that I should just be able to import directly. However, it's not working! Anyone else deal with this or have found a solid workaround??
- FCPX 10.1.1
- iMac OSX 10.9.2, 3.4 GHz i5, 24 GB RAM.

Hi Chris, I use C300 footage all the time, FCPx loves it, all you have to do is install the plugin : http://learn.usa.canon.com/resources/blogs/2012/20120224_xf_plugin_fcp_x.shtml
after that you should be good to go

Import AVCHD video footage into Premier Pro CS6 - MAC - AUDIO MISSING!

Hi,
Ive been attempting to import AVCHD video footage captured on a Panasonic into Premier Pro CS6 on my MacPro. I've tried this from the camera and after copying the entire folder to my desktop. The footage is there, but has no audio! I have read loads, forums, advice, YouTube vids and Adobe manuals, trouble shooting and help, but found no simple answer to this simple issue.
Any help would be appreciated.

Thanks too Jeff. Sandeep's post is a simple redirect to a post on Adobe which naturally I've already read before turning to the forum. The link then sends you to another link! Info. is too light on specifics, doesn't help! I have 6.0.5 as downloaded from Adobe... no joy! All remains the same, picture but still no audio! Maybe a compatibility issue with Panasonic's HC X900... but Panasonic's website is as light on info. as Adobe. I'm off to the shop to buy FCP or Avid.

Import CS3 AVI Footage into CS4

Similar Messages

Maybe you are looking for