Import data definition from ttx file

Post Author: chamalsl
CA Forum: Data Connectivity and SQL
Hi,
I have a report where data fields are imported from a ttx file. But the ttx file is missing.
1. Is there a way to add a new data field to this report without the ttx file.
2. Or is there a way to export existing fields to a ttx file and import it again.
3. Another problem I face is that when I try to create a new ttx file from Crystal Reports it says "Cannot load Crddt32.dll"
Thanks in advance, Chamal.

0
[Flat File Source [2]] Error: Data conversion failed. The data conversion for column "LongName" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page."
[Flat File Source [2]] Error: The "Flat File Source.Outputs[Flat File Source Output].Columns[LongName]" failed because truncation occurred, and the truncation row disposition on "Flat File Source.Outputs[Flat File Source Output].Columns[LongName]" specifies
failure on truncation. A truncation error occurred on the specified object of the specified component.
Which Is error I have got Thanq for your time & let me know
Hi Visakh16 this is Complete error I have got

Similar Messages

How to update link and import data of relocated incx file into inca file?

Subject : how to update link and import data of relocated incx file into inca file.? The incx file was originally part of the inca file and it has been relocated. ------------------- Hello All, I am working on InDesignCS2 and InCopyCS2. From indesign I am creating an assignment file as well as incopy files.(.inca and .incx file created through exporing). Now indesign hardcodes the path of the incx files in inca file.So if I put the incx files in different folder then after opening the inca file in InCopy , I am getting the alert stating that " The document doesn't consists of any incopy story" and all the linked story will flag a red question mark icon. So I tried to recreate and update the links. Below is my code for that //code start***************************** //creating kDataLinkHelperBoss InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*> (CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss))); /** The newFileToBeLinkedPath is the path of the incx file which is relocated. And it was previously part of the inca file. eg. earlier it was c:\\test.incx now it is d:\\test.incx */ IDFile newIDFileToBeLinked(newFileToBeLinkedPath); //create the datelink IDataLink * dlk = dataLinkHelper->CreateDataLink(newIDFileToBeLinked); NameInfo name; PMString type; uint32 fileType; dlk->GetNameInfo(&name,&type,&fileType); //relink the story InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA); relinkCmdData->Set(database, dataLinkUID, &name, &type, fileType, IDataLink::kLinkNormal); ErrorCode err = CmdUtils::ProcessCommand(relinkCmd); //Update the link now InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); UID newLinkUID; err = updateLink->DoUpdateLink(dl, &newLinkUID, kFullUI); //code end********************* I am able to create the proper link.But the data which is there in the incx file is not getting imported in the linked story.But if I modify the newlinked story from the inca file,the incx file will be getting update.(all its previous content will be deleted.) I tried using Utils<IInCopyWorkflow>()->ImportStory() ,But its import the incx file in xml format. What is the solution of this then? Kindly help me as I am terribly stuck since last few days. Thanks and Regards, Yopangjo

>
I can say that anybody with
no experience could easily do an export/import in
MSSQLServer 2000.
Anybody with no experience should not mess up my Oracle Databases !

Can I recover my data information from excel file?

For any reason I already lost (clear all) my data information, have any option where import the data information from excel file to view responses sheet? or , how, can I recover my data information?
Antonio

If you had saved your Excel file, then you may revert the Excel file to the last saved version. Follow below steps to do this:
On the File tab, click Open.
Double-click the name of the file that you have open in Excel.
Click Yes to reopen the Excel file.
If you had not saved Excel file, then follow below steps to recover your file.
Click the File tab.
Click Recent.
Click Recover Unsaved Workbooks.

Importing element definition from an EDD into a template - does not work

FM 10.0.1 German on Windows XP SP3.
When importing the element definitions from an existing EDD into an existing template, FrameMaker converts the template into a new EDD.
So the element definitions which are correctly defined do not appear in the template.
The highest level element is than ElementCatalog in the template and not the higherst lvel element defined in the EDD.
In FM9 this was no issue.
Any help is appreciated, I have a deadline and must do some changes in the EDD.
Best Regards
Thomas

Lynne,
EDD is english (Version FM7.0), Interface language is German.
Maybe it´s a localization issue.
I have attached a captivate demo pdf so you can see what happens and the
defective EDD.
Mit freundlichen Grüßen
Best Regards
Thomas Zeisig
From: Lynne Price <[email protected]>
To: "Th. Zeisig" <[email protected]>
Date: 13.10.2011 14:12
Subject: Importing element definition from
an EDD into a template - does not work
Re: Importing element definition from an EDD into a template - does not
work
created by Lynne Price in FrameMaker Structured - View the full discussion
Thomas,
No question the behavior you describe is a bug. However, I am unable to
duplicate it. I created an EDD with two element definitions:
Element (Container): doc
Valid as the highest-level element.
General rule: (
When I imported element definitions from this EDD into a new portrait
document, FM reports that element a is referenced but not defined and that
b is defined but not referenced. However, with all elements listed, the
element catalog shows a, b, and doc. The metatemplate elements are not
available.
I wonder if this is a language-dependent problem. Is your EDD German or
English? What about your user interface?
Can you send me a short EDD that fails as you've described?
Thanks,
 --Lynne
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969067#3969067]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969067#3969067]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in FrameMaker Structured by email or at Adobe
Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

Data loading from flat file to cube using bw3.5

Hi Experts,
                   Kindly give me the detailed steps with screens about Data loading from flat file to cube using bw3.5
       ...............Please

Hi ,
Procedure
You are in the Data Warehousing Workbench in the DataSource tree.
       1.      Select the application components in which you want to create the DataSource and choose Create DataSource.
       2.      On the next screen, enter a technical name for the DataSource, select the type of DataSource and choose Copy.
The DataSource maintenance screen appears.
       3.      Go to the General tab page.
                            a.      Enter descriptions for the DataSource (short, medium, long).
                            b.      As required, specify whether the DataSource builds an initial non-cumulative and can return duplicate data records within a request.
                            c.      Specify whether you want to generate the PSA for the DataSource in the character format. If the PSA is not typed it is not generated in a typed structure but is generated with character-like fields of type CHAR only.
Use this option if conversion during loading causes problems, for example, because there is no appropriate conversion routine, or if the source cannot guarantee that data is loaded with the correct data type.
In this case, after you have activated the DataSource you can load data into the PSA and correct it there.
       4.      Go to the Extraction tab page.
                            a.      Define the delta process for the DataSource.
                            b.      Specify whether you want the DataSource to support direct access to data.
                            c.      Real-time data acquisition is not supported for data transfer from files.
                            d.      Select the adapter for the data transfer. You can load text files or binary files from your local work station or from the application server.
Text-type files only contain characters that can be displayed and read as text. CSV and ASCII files are examples of text files. For CSV files you have to specify a character that separates the individual field values. In BI, you have to specify this separator character and an escape character which specifies this character as a component of the value if required. After specifying these characters, you have to use them in the file. ASCII files contain data in a specified length. The defined field length in the file must be the same as the assigned field in BI.
Binary files contain data in the form of Bytes. A file of this type can contain any type of Byte value, including Bytes that cannot be displayed or read as text. In this case, the field values in the file have to be the same as the internal format of the assigned field in BI.
Choose Properties if you want to display the general adapter properties.
                            e.      Select the path to the file that you want to load or enter the name of the file directly, for example C:/Daten/US/Kosten97.csv.
You can also create a routine that determines the name of your file. If you do not create a routine to determine the name of the file, the system reads the file name directly from the File Name field.
                              f.      Depending on the adapter and the file to be loaded, make further settings.
■       For binary files:
Specify the character record settings for the data that you want to transfer.
■       Text-type files:
Specify how many rows in your file are header rows and can therefore be ignored when the data is transferred.
Specify the character record settings for the data that you want to transfer.
For ASCII files:
If you are loading data from an ASCII file, the data is requested with a fixed data record length.
For CSV files:
If you are loading data from an Excel CSV file, specify the data separator and the escape character.
Specify the separator that your file uses to divide the fields in the Data Separator field.
If the data separator character is a part of the value, the file indicates this by enclosing the value in particular start and end characters. Enter these start and end characters in the Escape Charactersfield.
You chose the; character as the data separator. However, your file contains the value 12;45 for a field. If you set u201C as the escape character, the value in the file must be u201C12;45u201D so that 12;45 is loaded into BI. The complete value that you want to transfer has to be enclosed by the escape characters.
If the escape characters do not enclose the value but are used within the value, the system interprets the escape characters as a normal part of the value. If you have specified u201C as the escape character, the value 12u201D45 is transferred as 12u201D45 and 12u201D45u201D is transferred as 12u201D45u201D.
In a text editor (for example, Notepad) check the data separator and the escape character currently being used in the file. These depend on the country version of the file you used.
Note that if you do not specify an escape character, the space character is interpreted as the escape character. We recommend that you use a different character as the escape character.
If you select the Hex indicator, you can specify the data separator and the escape character in hexadecimal format. When you enter a character for the data separator and the escape character, these are displayed as hexadecimal code after the entries have been checked. A two character entry for a data separator or an escape sign is always interpreted as a hexadecimal entry.
                            g.      Make the settings for the number format (thousand separator and character used to represent a decimal point), as required.
                            h.      Make the settings for currency conversion, as required.
                              i.      Make any further settings that are dependent on your selection, as required.
       5.      Go to the Proposal tab page.
This tab page is only relevant for CSV files. For files in different formats, define the field list on the Fields tab page.
Here you create a proposal for the field list of the DataSource based on the sample data from your CSV file.
                            a.      Specify the number of data records that you want to load and choose Upload Sample Data.
The data is displayed in the upper area of the tab page in the format of your file.
The system displays the proposal for the field list in the lower area of the tab page.
                            b.      In the table of proposed fields, use Copy to Field List to select the fields you want to copy to the field list of the DataSource. All fields are selected by default.
       6.      Go to the Fields tab page.
Here you edit the fields that you transferred to the field list of the DataSource from the Proposal tab page. If you did not transfer the field list from a proposal, you can define the fields of the DataSource here.
                            a.      To define a field, choose Insert Row and specify a field name.
                            b.      Under Transfer, specify the decision-relevant DataSource fields that you want to be available for extraction and transferred to BI.
                            c.      Instead of generating a proposal for the field list, you can enter InfoObjects to define the fields of the DataSource. Under Template InfoObject, specify InfoObjects for the fields in BI. This allows you to transfer the technical properties of the InfoObjects into the DataSource field.
Entering InfoObjects here does not equate to assigning them to DataSource fields. Assignments are made in the transformation. When you define the transformation, the system proposes the InfoObjects you entered here as InfoObjects that you might want to assign to a field.
                            d.      Change the data type of the field if required.
                            e.      Specify the key fields of the DataSource.
These fields are generated as a secondary index in the PSA. This is important in ensuring good performance for data transfer process selections, in particular with semantic grouping.
                              f.      Specify whether lowercase is supported.
                            g.      Specify whether the source provides the data in the internal or external format.
                            h.      If you choose the external format, ensure that the output length of the field (external length) is correct. Change the entries, as required.
                              i.      If required, specify a conversion routine that converts data from an external format into an internal format.
                              j.      Select the fields that you want to be able to set selection criteria for when scheduling a data request using an InfoPackage. Data for this type of field is transferred in accordance with the selection criteria specified in the InfoPackage.
                            k.      Choose the selection options (such as EQ, BT) that you want to be available for selection in the InfoPackage.
                              l.      Under Field Type, specify whether the data to be selected is language-dependent or time-dependent, as required.
       7.      Check, save and activate the DataSource.
       8.      Go to the Preview tab page.
If you select Read Preview Data, the number of data records you specified in your field selection is displayed in a preview.
This function allows you to check whether the data formats and data are correct.
For More Info: http://help.sap.com/saphelp_nw70/helpdata/EN/43/01ed2fe3811a77e10000000a422035/content.htm

Va31 shedule line agreement data upload from flat file

Hi abapers
I have to upload some data (va31) from flat file to my database (shedule line agreement data) I am using user exit for it...Cant get which user exit will solve the purpose and where to check it from..I tried using SDTRM001 , meeta001 and and the va45A series but its not working. I used break point on these user exits but its not stoping at break point.
Can any one help me where to find which user exit will work in this case?
Thanks in Advance
Annu

Hi Prash,
Check these posts:
Re: Increasing the length of Infoobject from 60 to 240 characters
Re: InfoObject > 60
Bye
Dinesh

How to import a logo from flat file to SAP in SMARTFORM.

how to import a logo from flat file to SAP in SMARTFORM. i need to know whether TIFF format is used and also the full steps.
Thanks,

Hi,
You can not directly use a logo from a file into a Smart form. First you will have to upload it to SAP. This has to be done only once. Once it is imported into SAP then you can use it in smart form. To import a logo to SAP, goto SE78. Open the tree under GRAPHICS. Select the file type and click on the Import (first button on the toolbar, just before delete button). Select the logo file and give it some appropriate name along with description. Select appropriate type of the image and click Continue. Your logo will be uploaded into SAP from a file. Now in your smartform, Create a Graphic Node, give the name of the logo along with other properties. In this way you can import a logo from a flat file into SAP and consequently in a smart form.
Reward points if the answer is helpful.
Regards,
Mukul

Importing personal certificate from pfx file

Using iPhone configuration utility 3.5.0, Is it poosible to import a perosnal certificate using a .pfx file.
When I try to miport it only lists certificates in the personal certificate store on windows machine? It doesn't allow me to import a certificate from a file.

I am pretty sure that you can mail this certificate to an email account you can access on your iPad. Then when you open the certificate file it will be imported

How to populate/import data in a XSD file generated from a webservice

HI All,
I have an XSD file generated from the webserive using the CRM FM E2C_DOWNLOAD_CRT_SCHEMA.
I created a Adobe form with the Adobe life cycle designer using the XSD file.
However Data will have to be entered manually in this adobe form and cannot be pre-populated with data, How do we pre-populate data in the Adobe form generated from XSD file of the above CRM FM.

This is what you need:
integer li_fhandle, li_rcode = 1, li_sfound = 0, li_idx = 0, li_eqpos, i
string ls_filename = 'C:\app.ini'
string ls_line, as_key[], as_val[]
string ls_section = '[General]'
// OPEN INI FILE
li_fhandle = FileOpen(ls_filename, LineMode!)
IF IsNull(li_fhandle) OR li_fhandle < 1 THEN
// DO NOTHING
ELSE
DO WHILE li_rcode > 0
li_rcode = FileRead(li_fhandle, ls_line)
IF li_rcode > 0 THEN
IF POS(ls_section, ls_line) > 0 THEN
li_sfound = 1
CONTINUE
END IF
IF li_sfound = 0 THEN CONTINUE
IF POS(ls_line, '[') > 0 AND POS(ls_line, ']') > 0 THEN EXIT
li_eqpos = POS(ls_line, '=')
li_idx++
as_key[li_idx] = MID(ls_line, 1, li_eqpos - 1)
as_val[li_idx] = MID(ls_line, li_eqpos + 1)
END IF
LOOP
END IF
FOR i = 1 TO li_idx
messagebox('Key - Value',as_key[i] + ' = ' + as_val[i])
NEXT
// CLOSE INI FILE
IF li_fhandle > 0 THEN
FileClose(li_fhandle)
END IF
Adapt it to your needs... you probably should make it a function.

Saving data retrieved from text file to JDBC table

Hi,
I would like to save data, loaded from a text file to a dataset, into an existing JDBC table.
The documentation I found on this subject is very brief, and no matter how I tried, I couldn't succeed.
I would appreciate any help.
Thank you in advance

Hi there,
Here is an example of reading a String and a date from a text file. Once you have what you need in the Strings (or whatever) it should be easy to insert them into and SQL statement. Let me know if you need an example of this as well and I'll post it in the morning. Right now I'm off to bed :o)
Cheers
Mark
import java.io.*;
import java.util.*;
import java.text.*;
public class WriteTest {
public static void main(String [] arg) throws Exception {
   Date today = new Date();
   String name = "";
   SimpleDateFormat formatter = new SimpleDateFormat("ddMMyyyy");
   File myfile = new File("hello.txt");
   // how to input
   BufferedReader in = new BufferedReader(new FileReader(myfile));
   String name="",
   date="";
   boolean eof = false;
   do {
      name = in.readLine();
      date = in.readLine();
      if(!(eof = (name==null || date==null)))
      System.out.println(name+" "+formatter.parse(date));
   while(!eof);
}

Error occurred in the data uploading from Flat File in BPC NW

Hi,
I am doing Migration project from BPC MS to NW.
In this i am loading data from flat file to BPC NW. One error occured in this process that is Record Duplication.
Total 17000 records in that 7000 recards rejected by the reason of duplication.
The Information about Package Log
/CPMB/MODIFY completed in 0 seconds
/CPMB/CONVERT completed in 2 seconds
/CPMB/LOAD completed in 7 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
FILE= DATAMANAGER\DATAFILES\Aprilmayjun_2011_Budget_V1.CSV
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\ZAPRMAYJUN_2011BUDGET.xls
CLEARDATA= No
RUNLOGIC= Yes
CHECKLCK= No
[Messages]
Task name CONVERT:
No 1 Round:
Record count: 17064
Accept count: 17064
Reject count: 0
Skip count: 0
Task name LOAD:
Reject count: 7230
Submit count: 9834
Application: CorpBudget Package status: WARNING
Could you help me in this at the earliest.
Thanks and Regards
Krishna

Hi,
You cannot send the duplicated with the standard import package. You need to create or add a new package and link to /CPMB/APPEND process chain and do the import. This would consider the duplicate entries also. It looks like you need somehow load all the records including the duplicate ones.
So on excel go to Manage Data -> Maintain Data management -> organize package list and add a new package and link to the standard BPC process chain /CPMB/APPEND.
Thanks,
Sreeni

BAPI - DATA TRANSFER FROM .XLS FILE TO DB TABLE

I am upload data from xls file to database table.
first i have load xls file data to internal table (it_data) that is working.
then from internal table to database table (zskv_rate) by function module (ZBAPI_RATE_SAVEDATA) which is not working.
ex.
 LOOP AT IT_DATA.
Header
 ZSKV_RATE-DIVN = IT_DATA-DIVN.
 ZSKV_RATE-REGN = IT_DATA-REGN.
 ZSKV_RATE-PLANT = IT_DATA-PLANT.
 ZSKV_RATE-RATE = IT_DATA-RATE.
 APPEND IT_DATA.
 CALL FUNCTION 'ZBAPI_RATE_SAVEDATA'
 EXPORTING
 HEADDATA = ZSKV_RATE
 IMPORTING
 RETURN = BAPI_RETURN
 TABLES
 DATA = IT_DATA
 IF BAPI_RETURN-TYPE = 'E'.
 WRITE:/ 'Error:' ,BAPI_RETURN-MESSAGE ,'for material:' ,IT_DATA-DIVN.
 ELSEIF BAPI_RETURN-TYPE = 'S'.
 WRITE: 'Successfully created material' ,IT_DATA-DIVN.
 ELSE.
 WRITE:/ 'NONE' ,IT_DATA-DIVN.
 ENDIF.
ENDLOOP.
how to transfer data from internal table to database table.

Hi Sanjeev,
as u hv uploaded the excel file into the internal table,
u can update the ztable from internal table..
modify <dbtab>from itab.
regards.
Mdi.Deeba

FM or Way to validate Date format. The date is from TEXT File

Dear All,
I need to validate a date field whether it is in proper format.
The field is coming from TEXT file to Internal table by using FM GUI_UPLOAD.
Can any one give me the FM name or guide me how to do that?
Definitely points will be given for correct solution.
Thanks & Regards,
Neeraj

try the function module 'DATE_CHECK_PLAUSIBILITY'
call function 'DATE_CHECK_PLAUSIBILITY'
 exporting
 date = '23.09.2007'
 exceptions
 plausibility_check_failed = 1
 others = 2.
if sy-subrc <> 0.
 write:/ 'Please verify the date'.
 exit.
endif.

Question about insert date value from xml file

I want insert value into table from xml file. Every time I inserted value of date type into the table, I got the unpasable error message as following:
oracle.xml.sql.OracleXMLSQLException: Exception 'java.text.ParseException:Unpars
eable date: "2000-04-19 00:00:00.0"' encountered during processing ROW element
Thanks for anyone that can fix my problem or give me any suggestion.
email: [email protected]

<BLOCKQUOTE>quote:<HR>Originally posted by matmnwx:
I want insert value into table from xml file. Every time I inserted value of date type into the table, I got the unpasable error message as following:
oracle.xml.sql.OracleXMLSQLException: Exception 'java.text.ParseException:Unpars
eable date: "2000-04-19 00:00:00.0"' encountered during processing ROW element
Thanks for anyone that can fix my problem or give me any suggestion.
email: [email protected]<HR></BLOCKQUOTE>
Use:
OracleXMLSave sav = new OracleXMLSave(conn,tabName);
sav.setDateFormat(<hier the date format in the XML-File>);

Data Load from XML file to Oracle Table

Hi,
I am trying to load data from XML file to Oracle table using DBMS_XMLStore utility.I have performed the prerequisites like creating the directory from APPS user, grant read/write to directory, placing the data file on folder on apps tier, created a procedure ‘insertXML’ to load the data based on metalink note (Note ID: 396573.1 How to Insert XML by passing a file Instead of using Embedded XML). I am running the procedure thru below anonymous block to insert the data in the table.
Anonymous block
declare
begin
insertXML('XMLDIR', 'results.xml', 'employee_results');
end;
I am getting below error after running the anonymous block.
Error :     ORA-22288: file or LOB operation FILEOPEN failed”
Cause :   The operation attempted on the file or LOB failed.
Action:   See the next error message in the error stack for more detailed
           information. Also, verify that the file or LOB exists and that
           the necessary privileges are set for the specified operation. If
           the error still persists, report the error to the DBA.
I searched this error on metalink and found DOC ID 1556652.1 . I Ran the script provided in the document. PFA the script.
Also, attaching a document that list down the steps that I have followed.
Please check and let me know if I am missing something in the process. Please help to get this resolve.
Regards,
Sankalp

Thanks Bashar for your prompt response.
I ran the insert statement but encountered error,below are the error details. statement.
Error report -
SQL Error: ORA-22288: file or LOB operation FILEOPEN failed
No such file or directory
ORA-06512: at "SYS.XMLTYPE", line 296
ORA-06512: at line 1
22288. 00000 - "file or LOB operation %s failed\n%s"
*Cause:    The operation attempted on the file or LOB failed.
*Action:   See the next error message in the error stack for more detailed
           information. Also, verify that the file or LOB exists and that
           the necessary privileges are set for the specified operation. If
           the error still persists, report the error to the DBA.
INSERT statement I ran
INSERT INTO employee_results (USERNAME,FIRSTNAME,LASTNAME,STATUS)
    SELECT *
    FROM XMLTABLE('/Results/Users/User'
           PASSING XMLTYPE(BFILENAME('XMLDIR', 'results.xml'),
           NLS_CHARSET_ID('CHAR_CS'))
           COLUMNS USERNAME NUMBER(4)    PATH 'USERNAME',
                   FIRSTNAME VARCHAR2(10) PATH 'FIRSTNAME',
                   LASTNAME    NUMBER(7,2) PATH 'LASTNAME',
                   STATUS VARCHAR2(14) PATH 'STATUS'
Regards,
Sankalp

Import data definition from ttx file

Similar Messages

Maybe you are looking for