Import database from ACDSee Pro 8.1

I would like to start with PSE, but i have a database of 3000 pics in ACDSee pro 8.1. How can I import this pics into PSE?
Thanks for your response.
Luk

Pablo,
Yes you can import from 10.0 to 10.1.
Did you follow the procedure in the Upgrade guide for this sbop_sm_10_upgrade.pdf available from the Help Portal?
When you did the transport from 10.0 did you double check that there were no 0 byte files? If there are the Transport incorrect and should be redone.
Regards
Colin

Similar Messages

How do I Import footage from Premier Pro CS3 to After Effects?

Hi
As the subject says, how do I import footage from premier pro cs3 into after effects. I'm getting rather frustrated trying to figure this out.
Via copy & paste I can copy into after effects but this copys the whole of the track on the timeline, where as I just want 10 seconds copied. The 10 seconds I want to copy is a segment & was highlighted when I clicked copy.
Also when the full track gets copied, all my edits aren't copied & I get the raw track copied???
I've googled this, tried the "Add Dynamic Link" but all I want is to copy 10 seconds of footage from premier into after effects, add my effect & then copy it back, and I can't figure out how to do this simple thing
Any help
Thanks.

I am still not getting this.
I highlight the selection I want to copy into after effects. I copy & paste it & it pastes my entire footage without any off the edits I have made.
Having searched loads for this I can find no other answer than copy & paste.
Please please could you guy be more specific with your answers as I just can't figure this one?

Import Database from ver.8i to 8.05

Can I import Database from old version to new version (like from ver. 8i to 8.05)?
If it can, how ?

Yes you can do import from old version to new version without any problem. However new version to old version has some restrictions. You cannot import the export file taken in 8i into 8. In this case you have to take export using oracle 8.0 export utility.

How to export/import database from tools menu in sql developer.

Hi,
I need to export database from a server and import it on another db server using the export database function under tools menu in SQL developer. How do I import it? This is for Oracle 10g database.
Thanks

Depends what are you trying to do? Are you making a database copy or just creating an empty schemea or creating schema with the data?
With 10g, you have also options of using datapump (expdp/impdp) and conventional export/import which is very usefule and easy to use when it comes to create a clone (duplicate schema) or an export/import of some objects.
If you right click on table object, you have options of export ddl/export data and import data but thats different thant what expdp/impdp or conventional export/import provides. For very small database you can use sqldeveloper but consider
using other above mentioned options. Hope this helps
Regards

Importing Database from SQL Server into Oracle 8i

Hello Friends,
Cuurentlly we are using SQL Server as our application database, Now we want to switch on at Oracle 8i,bcz of some problems,
If anybody had done so,then please help me in solving this problem,
I wana Import whole database from SQL server to Oracle
Lot of thanks

Hi,
Use the SQL Server Enterprise Manager to export all the tables from SQL to oralce.
When selecting the target database use the Oracle native driver (the name is not on top of my head) and not the ODBC one.
You will have problems with datatypes. Make sure to edit the mappings for the proper datatype if required.
If you have ntext columns, make sure they are translated to CLOB and not long.
Regards,
Wasim.

Import Workspace from Premiere Pro 2

I've created custom workspaces in Premiere Pro 2. How can I import these in CS3, is there an option to import these workspaces?

What if I have TONS of actions saved - can those be imported into CS3 from CS2? I am not working on Premier Pro 2 like Loek Verhees (who posted similar question).
I don't want to import everything from my workspace but I do want to import my actions.
I can't believe that the PS guys would not have a way to do this between the 2 programs regardless of the upgrades.
PLEASE tell me I can import my actions at least....
Meg Daniels

Problem importing photos from Extreme Pro SD Card

Sorry if this has been covered. I atempted to import photos from my new CF card via a Griffin card reader into my iMAC. Never had a problem before, but iPhoto won't respond and won't recognize the card. Was able to import to my wife's MacBook Pro with no problem. Any thoughts? Thanks

My appologies for wasting your time. The card reader has given up the ghost!

How to export and import database from command line?

I am trying to export my old database into new server.
However, I want to export and import that database from command line.
Is it possible?
Thanks.
SZ

I used this command
exp username/password@database full=y
my export log file is as follwing:
Connected to: Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
EXP-00037: Export views not compatible with database version
EXP-00000: Export terminated unsuccessfully

Importing contacts from FileMaker Pro

I search this but none of the solutions work.
Need to export FileMaker Pro files into Contacts.
Tried .tab and .txt and doesn't work. Any good solution?
Larry
FM Pro 11

AddressBookImporter offers a simple means to import comma-separated value or tab delimited files into the Address Book, either one of which can be exported from FileMaker Pro.

Import Database from dmp file

Dear,
I have export a database in Oracle 10g release 1 then can’t import the database successfully in oracle 9i release 1 because some errors are generated. Please help me how can I import the dump file into oracle 9i database without warnings.

Use this work around
Invoke export (exp) from 9i oracle home to export 10g database then import it in 9i database.
Virag

How to export and import database from one laptop to another?

hi,
plz anyone help me to export and import one of my user in the database to another laptop.....
i hav absoulutely no knowledge in doing this, plz some one help to do it from scrap...
thanks in advance for ur kind help

what's the oracle version on Source and Target Database release version? Take a look at the below links.
[http://wiki.oracle.com/page/Oracle+export+and+import+]
[Import_Export_FAQ|http://www.orafaq.com/wiki/Import_Export_FAQ]
Export
[Oracle Export Utility|http://www.psoug.org/reference/export.html]
[Oracle Import Utility|http://www.psoug.org/reference/import.html]
HTH
Anantha

Render quality drops when importing sequences from Premiere Pro CS4

Hello,
I have both AE and Premiere Pro CS4, and, because my Media Encoder doesn't work (a common problem, apparently), I import my sequences into AE to render. However, I've noticed a marked drop in quality in the sequence when imported into AE as opposed to when it's in Premiere Pro. It's comparable to a "Full" dropping to a "Half" when changing preview render quality in AE. What am I doing wrong? Is there some simple way to match the quality of the AE Comp (that has the PP sequence in it) to what the original Premiere Pro project has? Should I not be putting the PP project into a new comp in AE before I render it out? Is there another way that can retain the quality of the original Premiere Pro project?
This is urgent, as I need this rendered by Monday. Any help would be appreciated! Obviously, this is the first major project I've done this "workaround" with. I wish AME worked, but it doesn't for me.
Thanks!

By default, the Ram preiew resolution is adaptative and not full quality, as it's just to "preview". You can switch this behavior to full quality, and by default, when you render, it will always be "Full quality" before being compressed by your output module.
You can check the Ram preview doc and the rendering doc from the AE help.
Hope that helps,
Seb

Import database from Linux to Windows fails with creating tablespaces

Using (Oracle10g/Linux) user/schema (i think)"Sys" i exported succesfully full database and produced a log file which looks like this:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export done in UTF8 character set and AL16UTF16 NCHAR character set
server uses AL32UTF8 character set (possible charset conversion)
Note: table data (rows) will not be exported
About to export the entire database ...
exporting tablespace definitions
exporting profiles
exporting user definitions
exporting roles
exporting resource costs
exporting rollback segment definitions
exporting database links
. exporting sequence numbers
exporting directory aliases
exporting context namespaces
exporting foreign function library names
exporting PUBLIC type synonyms
exporting private type synonyms
exporting object type definitions
exporting system procedural objects and actions
exporting pre-schema procedural objects and actions
exporting cluster definitions
about to export SYSTEM's tables via Conventional Path ...
exporting table                    DEF$_AQCALL
exporting table                   DEF$_AQERROR
exporting table                  DEF$_CALLDEST
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.Now (in Oracle10 Express/ Windows) i'm importing the dmp-file using user/schema System, following errors occur:
Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Export file created by EXPORT:V10.02.01 via conventional path
Warning: the objects were exported by SYS, not by you
import done in AL32UTF8 character set and AL16UTF16 NCHAR character set
export client uses UTF8 character set (possible charset conversion)
. importing SYSTEM's objects into SYSTEM
IMP-00017: following statement failed with ORACLE error 1119:
"CREATE UNDO TABLESPACE "UNDOTBS1" BLOCKSIZE 8192 DATAFILE '/u01/app/oracle"
"/oradata/live/undotbs01.dbf' SIZE 251658240       AUTOEXTEND ON NEXT 524288"
"0 MAXSIZE 32765M EXTENT MANAGEMENT LOCAL "
IMP-00003: ORACLE error 1119 encountered
ORA-01119: error in creating database file '/u01/app/oracle/oradata/live/undotbs01.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "SYSAUX" BLOCKSIZE 8192 DATAFILE '/u01/app/oracle/oradat"
"a/live/sysaux01.dbf' SIZE 346030080       AUTOEXTEND ON NEXT 10485760 MAXS"
"IZE 32765M EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT"
" SPACE MANAGEMENT AUTO"
IMP-00000: Import terminated unsuccessfullyWhy i get those errors when importing? Seems like the main problem is that the export was done in Linux which have it's own directories like '/u01/app/oracle/oradat' and others but in my Windows OS those folders don't exist? The whole import fails because tablespaces couldn't be created, later Schemas couldn't be created and tables also. Can i get the import work somehow?
I runned the import as following:
C:\Users\charlesr>imp userid=system/a FULL=Y FILE=exp_ddl.dmp log=imp.logMy Oracle 10 XE is installed into folder:
D:\oraclexe\app\oracle\product\10.2.0Maybe i should run the import command in drive D where my Oracle lives, not in drive C as i did?
And now when i tried to run the import on drive C, seems like my database user "system/a" is corrupted or password corrupted:
C:\Users\charlesr>d:
D:\>imp userid=system/a FULL=Y FILE=exp_ddl.dmp log=imp.log
Import: Release 10.2.0.1.0 - Production on R Sept 10 17:32:25 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
IMP-00058: ORACLE error 1017 encountered
ORA-01017: invalid username/password; logon deniedUsername:I think i don't have on OS level rights to write to C-drive, that's why i got errors. But now i can't log in with system/a, why so?
Edited by: CharlesRoos on Sep 10, 2010 7:38 AM

CharlesRoos wrote:
Why i get those errors when importing? Seems like the main problem is that the export was done in Linux which have it's own directories like '/u01/app/oracle/oradat' and others but in my Windows OS those folders don't exist? The whole import fails because tablespaces couldn't be created, later Schemas couldn't be created and tables also. Can i get the import work somehow?Precreate tablespaces. You could use import option show=y to capture import run statements and find CREATE TABLESPACE statements. Keep in mind your target database already has undo, temp system, etc. tablespaces so you do not need to precreate them. Then rerun import.
SY.

Importing EDL from Premiere PRO CS4

Hey! I shot a short film using the XDCAM EX1, then imported all the footage to FCP 6.0.4. Now it will be edited on APP CS4 but we're now doing some compatibility tests. Since PP wouldn't run the Quicktimes made during shooting using XDCAM Transfer to FCP, I made a couple of MPEG2 files on Compressor and that ran well.
I got PP to read an EDL made on FCP and now I'm trying to read an EDL from PP to FCP but it says it can't. For secuence Preset I use XDCAM 720p24 since it doesn't have option for regular MPEG-2, is there an export option on PP that we're overlooking? What is to be done in order to get this to work?
Thanks a lot.

Thanks for your answers guys.
I can't reimport since it has been deleted from the original cards where it was captured.
I import from the import menu, then EDL. I don't know if my setting is correct (XD CAM EX 720p24) but it does match with original clip. Also, the files exported from PP are marked as *edl.txt, is this a problem? I tried changing the extension to just .edl but it didn't work either. The exact message is: "Error importing EDL"
Is there a workaround for this?

Cannot import photos from Go Pro

I get the error downloading image
IPhoto cannot import your photos because there was a problem downloading an image

Can you access the images with Image Capture (in your Applications Folder) ?

Import database from ACDSee Pro 8.1

Similar Messages

Maybe you are looking for