Import dialog - change in appereance and functionality

HI!
I have spent hours of searching photographs accidentaly imported in different Catalogue. To avoid this problem, I have idea to highlight Catalogue name when importing photographs.
This is one of stupid mistakes that anyone can make: Came from shooting, start importing photographs before you have checked catalogue where you are importing photographs.Import has finished, camera turned off, and you have switched on other catalogue to finish unfinished job. After that you start to scratch your head where are the photographs....
Easy solution for "lost heads" like mine can be:
When someone "with lost minds" see fault catalogue name, he or she can stop importing process and create new or load appropriate catalogue.
Isidor

OK, I have since discovered that the second iPhone device is listed only when my iPhone is plugged into a DIFFERENT USB port on my MBP. If I plug it into the same port I usually use, it is only listed one. However, both Aperture and iPhoto still see one iPhone device whether it is plugged in or not, and both show images with outlines only and won't import photos. So strange

Similar Messages

  • Trying to import a .mov file made with gotomeeting - no problems in past yet says No importable files -None of the selected files or folders can be imported. Change the selection and try again.  re-recorded 3 times and still not accepting HELP

    Trying to import a .mov file made with gotomeeting - no problems in past doing this. After 3 attempts recording the hour long video and trying to upload it to iMovie, it says No importable files -None of the selected files or folders can be imported. Change the selection and try again. What could the reason be?

    After much research and troubleshooting, GoToMeeting replied with the final answer: We do not support the uploading of recordings to editing software. If you are having issues uploading a recording, unfortunately, we do not have tools or steps to resolve this. It is not a supported feature. I am sorry for any inconvenience this may have caused you. 
    The no longer plan to support editing of recordings made with their software.  So, we are planning to find a new meeting provider.

  • Import dialog shows iPhone twice, and photo list only shows outlines

    In Aperture 2.1.2 I have been able to import photos from my iPhone until just recently. Now the import dialog shows three choices of import devices/locations, Local Disk, RJH iPhone and a second RJH iPhone. If I select either iPhone the main window displays outlines of 7 images but no picture information except for the filename. If I actually try to import the pics it says 'Import completed with errors, the following files were not imported' and it lists all the filenames. One of the iPhone devices shows up in the import list EVEN WHEN THE iPHONE IS NOT CONNECTED!
    I'm sure there is a plist or something that has the list of import devices bu I have not been able to find it despite extended web and support searches.
    Anyone heard of this?

    OK, I have since discovered that the second iPhone device is listed only when my iPhone is plugged into a DIFFERENT USB port on my MBP. If I plug it into the same port I usually use, it is only listed one. However, both Aperture and iPhoto still see one iPhone device whether it is plugged in or not, and both show images with outlines only and won't import photos. So strange

  • List of changes in Equipment and Functional Location

    Dear Colleagues?
    Is there an easy way to get a list of all Functional Location and Equipments changed in the last week?
    Thanks and Regards

    Dear Davison,
    You can use transaction /N/ISDFPS/IL21 , it will give you detailed history of equipments and functional locations with usage change. It''s a DFPS transaction, hope its available in your system, or else you can goto Usage List in extras menu and customize the layout by adding the colums required to get the information you want in case of equipments or goto Usage Period in case of functional location in structure menu.
    Thanks & Regards
    Niraj Visnoi
    Edited by: Niraj Visnoi on Aug 30, 2010 9:14 PM

  • Change equipment and functional task list

    Hi All,
    I have a requirment to mass change the equipment and functinal task list data.The upload file has the group, group counter and operation which i have to use has key fields and only one field value needs to be changed. the field value that needs to be changed is 'Work involved in the activity' (PLPOD-ARBEI) field. we have change the no of hours.
    could anyone please let me know if there is a BAPI or function module to fulfill this particular requirment. I searched the forum but could not find any BAPI.
    Thanks in advance.

    hello,
    see i can tell you onething....when you will go to routing screen (ca01,ca02,ca03)...
    you will get a find button there on screen (see binacular sign)...when you click on that and enter any operation number ..then it brings that operation to first rwo and then you can modify the fields you wanted...
    but if you want to modify operation ..user has to give the operation number along with routing group and group number....
    while doing bdc recording you have to follow same same sequence of step...go to ca02 enter routing grp and grp counter from that screen go to header and from there go to operation screen ..click binacular button to find operation...then when that operation will come on first screen ..edi the field you want for that operation...
    you can include all this recording in a Function module...take these grp number and grp counter as import parameters to FM and define a table for operation details .....and the execute ..it will change the operation..but remember the thing taht user shd know the vales op operation to be modify and grp number and grp counter..if he is trying to modify the operation which is not existing then ..you can give error message stating the same...so he will change the operation

  • Lightroom will not import my photos.   It did up to a week ago.   I have changed cards and cameras (both worked two weeks ago).   I can import the photos to Picasa and iPhoto

    Lightroom will not import my photos.   It did up to a week ago.   I have changed cards and cameras (both worked two weeks ago).   I can import the photos to Picasa and iPhoto.   I get the following error message:  
    Some import operations were not performed.
    The following files were not imported because they could not be read  [followed by a list of the files I wanted to import]
    Thumbnails show up.  LR just will not import them.
    Any idea what is going wrong?

    If the Import button is not clickable, that means that Lightroom thinks you have no new photos to import (one possible reason is that they are duplicates)
    So, you need to figure out why Lightroom thinks that. The way I would do this is to search your Library module for at least one of the photos, by file name. To do this, you would follow all 4 of these steps in sequence:
    Click on All Photographs in the Catalog Panel on the left of the Library Module
    Turn off all Filters (Ctrl-L or Cmd-L once or twice)
    Expand all stacks: Photo->Stacking->Expand All Stacks
    Search for one or more of the photos using the Filter Bar (press backslash), search by File Name

  • IPhoto suddenly doesn't seem to recognize my camera, and essentially freezes. The only thing that makes sense is that another person in my house imported using a different camera and that changed things somehow. Ideas?

    iPhoto suddenly doesn't seem to recognize my camera, and essentially freezes. The only thing that makes sense is that another person in my house imported using a different camera and that changed things somehow. Ideas?

    Hi There!
    The camera is a Panasonic Lumix. I don't have a USB card reader. I did try and different port although not a different cable.
    I did remember one additional thing. I plugged my camera in at work to a PC. It was after that, when I came home, that the iPhoto wasn't working when I connected my camera to our iMac/iPhoto at home. I think this may have caused the problem.
    Cheers!

  • HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

    HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

    I have the same problem, and the solutions in   Error changing modules | Lightroom do not work.  Even uninstalling and reinstalling a new copy did not solve the problem.  As anyone got an idea what other lingering files might be causing the problem?

  • Creation and Change Date for Tcode and Function Groups

    Hello All,
    I need to display the Creation and Change Dates for Custom Tcodes and Function Groups in a Report. Can anyone please let me know the logic of retrieving it.
    regards,
    Mahesh

    Hi,
    TADIR and TRDIR is the tables where you can find all these data
    Regards
    Sudheer

  • Import weirdness and import dialog box

    I'm in the import box and I want to import just the RAW (DNG) files from a folder and not the accompanying JPEGs. First strange thing I notice is that Aperture is telling me that the JPEG files are roughly the same size as the RAw files. I thought I could sort the list by file size, knowing that the RAw files would all be bigger than the JPEGs. Wrong. Aperture is giving me bogus file sizes for the JPEGs. I went to the Finder to double check and, surely enough, the average JPEG file size is about 2.5 megabytes. Aperture has got them listed, on averages, as 15 megabyte files. So I cannot sort by file size.
    So, I go down to the sort drop-down menu at the bottom of the Import box and I can only sort by File Name, File Size, or Image Date; the Custom is greyed out. How do I access the "Custom" sort feature in the Import Dialog box? And why is Aperture giving me bogus file sizes for my JPEGs?
    Aperture is in sore need of a real update.

    jrg_uk has the answer. The list view is often ignored, or just plain forgotten!
    See here for metadata set information:
    http://www.bagelturf.com/aparticles/metadata/msets/
    And for an example of using the list view:
    http://www.bagelturf.com/files/0b72b7bfc88b7dab1c33730facaec655-1012.php

  • Is there api function to change access mode and set a passcode to recording in meeting?

    Is there api function to change access mode and set a passcode to recording in meeting?
    When I'm trying to use "action=acl-field-update&acl-id=SCO_ID_RECORDING&field-id=meeting-passcode&value=MY_PASSC ODE" it just clean the password and do not set it or change.
    And "action=permissions-update&acl-id=SCO_ID_RECORDING&principal-id=public-access&permission- id=view-hidden" do not work too.

    There is not a specific API for doing this. This was discussed in the other Connect forum here, Adobe Connect User Community.
    For you call I would make the second part differently. Instead of 'field-id=meeting-passcode&value=MY_PASSCODE' I would call 'meeting-passcode=MY_PASSCODE' and see if that worked better.

  • HT204053 Our Apple ID is ok and functioning.  However, I just came on as the IT for the group and cannot find how to change the name.

    Our Apple ID is ok and functioning.  However, I just came on as the IT for the group and cannot find how to change the name.

    Assuming you mean the personal name associated with the account, as opposed to the login (which you can change if it's not an @icloud.com. @me.com or @mac.com address) you can change this at http://appleid.appla.com . Click on 'Manage your account' and then on 'Edit' next to 'Your name' and the name currently associated with the ID.

  • LR3 Bug - No import dialog and menu flash

    If I go to the "File" menu and choose "Import photos" nothing happens; when I try again, the menu (and all others) will just flash whenever I try to select it.  I did notice that the import progress bar above the navigator panel in the Library Module is showing as if the import dialog is open.  I've tried repeatedly and cannot get the import dialog to open...it was fine yesterday.  Ideas?

    And what happens if you delete the dot at the end of the folder name?

  • Hi, My ipad has been stolen and I set up the erase data function in i cloud "find my device". I then changed my mind and wanted to change this to locate my device

    Hi, My ipad has been stolen and I set up the erase data function in i cloud "find my device". I then changed my mind and wanted to change this to locate my device rather. When I deleted the "erase" option it removed my ipad from the find my device list. Can I restore it back onto the list?

    Once a wipe is sent, it cannot be stopped. You will not be able to track your iPad after that.

  • Attempt Import and after Choose Clicked - No Import Dialog

    When attempting to import pictures, after I select the pictures to import, then click choose, the box closes, but the next import diaglog box does not open.
    Then,the program is locked and nothing works until ESC is pressed.
    All worked fine before with CS2 Premium and Lightroom 1.4.
    However, I now have CS3, and both Lightoom 1.4 and 2.1 don't import photos as explained above.
    Is there a conflict or some routine I have to run to sort this out? Thank you!

    It sounds like the Import dialog is off-screen. Did you used to have two monitors and now only have one, or used to have a higher resolution and now have a lower resolution?
    If it is off-screen, the way you can get it back is to use the Move command that most all Window's-windows have. You can access it by using Alt-Space when the window has focus, which would be just after you do the Choose... command.
    Hit Alt-Space and then M and then use the cursor-arrow keys to move the window in one direction then the other until you see it peek onto the screen.
    You can try this with an on-screen window to see what happens.
    If you're on a Mac there is likely an equivalent command sequence.

Maybe you are looking for