Import digital8 iMovie 11 problem

Hi all. I would import my video tape on my iMac but i'm experiencing some problem.
Hi have a sony digital handycam DCR-TRV145e PAL, the format is digital8. I use iMove 11 to import the video. I connect my camcoder to the mac through firewire 4 to 9 pin.
I follow to procedure i can read almost everywhere on the web. In theory, everything should be simple...in theory!
I switch the camcoder to VCR mode then iMovie open the blue screen window to import the video. I click the import button, select the name of the event, and the import process starts. I can see the images of the video tape in the window.
When i stop the import, iMovie pop up me saying that X minutes of video are successfully imported.
But no clips are are created. The thumbnails are not generated. If I select the event in the event library in the bottom-left side no clips are displayed in the bottom-right side.
Looking at the folder of the event (using Finder) it is empty or, in some case, there are many empty files (zero byte) with dv extension.
I've tested it with 3 different OS, snow leopard, lion, mountain lion (always iMovie 11), but the result is the same.
Any idea?

Hi
May be a grain of help here - May be ?
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Similar Messages

I had old 8mm converted to dvd then used "Rip It" then imported to iMovie. My problem: in the event library a complete person is shown, in the project the top of their head is missing. How can I fix?

I had old 8mm movies converted to dvd. I then used "rip it" and imported to imovie. In the event library a complete person is shown on a clip. However, when I move that clip to the project the tops of peoples heads are missing in the playback. I have used standard (4:3) because the cut is lower in widescreen. How do I fix this problem?

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

Problems importing to iMovie 10.0.5

When I import to iMovie 10.0.5 from SD card, I get an icon of a small video camera in each imported frame saying that the media is still associated with the camera and asks me to reimport from File menu, but there's nothing in the File menu allowing me to reimport... How can import from the camera to iMovie? At the moment, I can't finalise or share project as it hasn't been imported properly from the video camera. I've imported no problems before. I just want to get the files off the camera and imported into iMovie. iMovie detects the video camera (comes up as 'Unknown' in left-hand menu) and asks me to import to an event, which it does - I can see all the scenes I've shot on the camera, but with the aforementioned icon in each frame...

Hummm...
I just opened the clip with Quicktime, and after "converting", it shows the same false 4:3 aspect ratio, so now i think it's not only a iMovie issue.
Remember: iMovie 9.0.9 KEEPS working OK.
Quicktime here says its version is 10.3 (727.4)

Problems with Canon HF100 (NTSC) importing into imovie

I know this question has been asked, but nothing I have tried has worked. I have a Canon HF100 and when I try to import my files (mts) into imovie 08 I get a message that says, "There was a problem with - out of - of your clips. Check your clips." or something to this affect. While it looks like they've imported, they are nowhere to be found in the event. What am I doing wrong? I have VoltaicHD which worked for the first clips but now everything I try to convert "fails". Please help.

hey there tomaswk, welcom to Discussions.
1) when importing HDV, iMovie/FCE HD converts it on the fly to A.I.C.-Apple Intermediate Codec. you'll need @ least 2 GB of RAM to approach realtime ingest to your MBP. i have 2.5 GB on my DP G5.
2) the conversion also results in file sizes about 4 times the size of SD video. plenty of RAM is a necessity for HDV in iMovie or FCE HD. sounds like the partition could be the culprit. maybe get an external FireWire HDD for your HDV iMovies.
good luck.
Message was edited by: Donna Jones1

Importing from iMovie HD project

I bought a new iMac and i'm importing in iMovie 08 a project from iMovie06.
But i have 2 problems: first not all the clips are imported and second that the clips that are imported are not in the same order of the original projct.
Does anyone have any ideas?

If in iMovie 06 have a project with 20 clip in iMovie 08 found less clips but everyone is complete. Entire clips are missing.
1) If you are counting "rendered" clips in the "Project.PKG > Media folder," they are not included in the import. You will have o move them manually if you want them.
2) If you are counting clips included in the source bin, then I don't know if they are supposed to import or not. (I.e., I don't use the built-in HD import option in iMovie '08.) You can check and see if these are your missing clips. if they are, then add them to the HD project before import and see if they are imported to iMovie '08. If they aren't, then you may need to send a feedback to Apple regarding this issue.
And the order in which are imported is not the same as in the original project
Editing and rendering in an iMovie HD project will change the clip names which, in turn, may re-order the files as the finder "sees" them. (I.e., they are ordered alphabetically in the project media folder.) So, if they are imported in alphabetical order, they would be out of their original "source" or timeline order.

Older DV Tapes Will Not Play or Import Into iMovie

I have a lot of DV tapes shot ten years ago on a JVC camcorder that I want to import into iMovie.
I have a new Canon Vixia hv 30 and I'm assuming these older mini DV tapes are compatible because these old tapes play fine in the camcorder itself, and also on my TV, but when I try to import them into iMovie, they do not display in the iMovie import window. However, new tapes shot recently with the new hv 30 display and import just fine.
Is there a problem with the old tapes being incompatible in some way I'm not understanding?
Dino1956 answered a similar problem in 2008:
*iMovie Camcorder Import Fix*
*Connect your camera. put it in 'play' mode (sometimes also called vcr). start up imovie (hd or 08; both work, but i use HD). go to the blue 'import' screen. it should just say 'camera connected'.*
*Now comes the trick. don't click import, but instead put your camera in 'record' mode. you should now see whatever it is that your aiming the camera at on your computer screen.*
*QUICKLY put your camera back in play mode. again very quickly press the 'play' button, either on the imovie import screen or on your camera. your DV tape will start to play back.*
*-On my computer, the video now suddenly shows up in imovie! You can now click the 'import' button in imovie, and imovie will start importing the tape in realtime. This is a bit slower than the normal import method, but hey, at least you can now get your video into imovie!*
...but this solution doesn't work for me. I cannot "quickly" click the Play button on the camera monitor or in the iMovie window after switching from record to Play on the camera because there is a 5 second time lag on both the camera's monitor and in the iMovie window while the iMovie screen/camera monitor switches over from Record to Play.
Is there any way I can get older DV footage into iMovie from my Vixia hv 30? My resources are at a very low ebb right now.

I found a clue on the www.hv20 website: Old DV tapes recorded before HDV...you need to go into the hv 30 menu and select "DV" rather than "HDV", then the video shows up in the iMovie import screen and imports easily.

How do i import my iMovie event library to FCPX when the iMovie library is NOT in the home folder.

my situation:
my MBP is running two drives: a 160gb SSD that has my home folder, OS and all apps, and a 500gb HDD for data and non-essential software.
the HDD used to be my OS and home folder, so I used to run iMovie off it. but after installing the SSD, i am now running Lion off it, and it is now my new home folder.
so my iMovie events are now marooned on my ex-home folder, on what is now my HDD data drive.
I can import iMovie events no problem, as FCPX prompts for where the project files are. but FCPX doesn't prompt for the location of the iMovie events library, so how do i get those old iMovie events in?
i suppose i could copy all the events over to my SSD, then do the import, and then delete them. but that would take up a lot of space, and id rather not be copying and deleting so much data on the SSD.
is there any other way?

It is definitely to your advantage to use the FCP command to Import your iMovie Events all at once. The reason is you will not double up on space. FCP will create a hard lingk to your events so you can access them in FCP without altering the iMovie Event in any way, but without doubling the space.
So there are several ways you could approach this.
1) If you are not using iMovie anymore, you could simply move them to the iMovie Event folder at the top level of either your old drive, or any attached drive that is formatted correctly (Mac OS Extended (journaled). This would likely break any iMovie Projects that you currently have, so it is not recommended if you will continue to use iMovie.
2) If iMovie is still working, you can use iMovie to move the Events to a proper drive. Click VIEW/EVENTS BY DISK in iMovie, and Command-Drag in iMovie to Movie Events to the drive you want while maintaining your project links. This option is probably only available to you if you have set up your old drive as your official Home directory.
3) As long as you set your "old" drive to be your Home Folder in OSX, you can just leave them where they are. OSX lets you have the Home folder on a different drive than your startup drive. This is not ususally recommended, but it is useful when you have an SSD. When I got my current Mac with an SSD, I moved my home folder to the internal hard drive but OSX and my Apps are on the SSD.
To do this, I followed the advice of longtime poster Pondini, who has a great website that walks you through this.
Here is a link.
Link to Pondini's site. http://pondini.org/OSX/Home.html
Link to Pondini's post on your topic. http://pondini.org/OSX/SetupOther.html

Why do some AVI files not import into iMovie?

Some of my AVI video does not import into iMovie. When I try, it gives me a non-specific error message. Is there a way I can import it? Other AVI files import with no problem.

AVI is a container, not a format; the audio and video in an AVI may use any codec, and some codecs can't be used in Mac OS X. Installing Perian may help.
(34138)

Video footage I've imported from iMovie to Premiere cs6 is missing after the import! please help!

I initially imported raw video footage from an event that I shot into iMovie 11, but later decided to try an edit the footage in Adobe Premiere CS6. I successfully imported the iMovie file folder into CS6, then saved and exited the program to work on it after lunch. When I returned and reopened the file, the footage could not be found. I attempted to reopen it in iMovie and it came up as a missing file also. I know it successfully opened in Premiere because I've seen the footage. I didn't trash anything so it's not in the trash. Where did my footage go, and how can I retrieve it?

Hi Ann, Hi JSW,
I looked around a bit and noticed that this same problem sometimes happens in iMovie itself. People lose their media because it gets copied inside the project file itself. If you right click to see the package contents, you might be able to locate the media and copy it to a dedicated folder, then reconnect media to it in Premiere Pro. See this post on the apple website: Source clip missing | Apple Support Communities
Thanks,
Kevin

Frustating Import over iMovie as Final Cut throws errors

I have recorded some WOW videos (using Apple intermediate codec, 25 fps) and Final Cut Pro fails, if I try to import the file directly.
But iMovie imports it without any problem. Export to XML works sometimes, sometimes not. Exporting to Quicktime (using Apple Intermediate, 25 fps) from iMovie and then importing this file in Final Cut Pro is the only solution.
I'm really disappointed that a big suite like Final Cut Pro is NOT able to import files, that iMovie imports without problems.
Apart from this every application I tried (Quicktime, Cinema Tools etc.) is able to open the file.
Error message Final Cut Pro is in german:
Dateifehler: 1 Datei(en) erkannt, Zugriff auf 0 verweigert, 1 unbekannt
Translated this may be something like
File error: 1 file(s) identified, Access on 0 denied, 1 unknown
Message was edited by: MichaelLindenau

Sorry, but why should I call those video guys. It works for most of the programs and if FCP is pickier, than at least I expect, that it can do the same transformation as I'm doing with a workaround (import into iMovie, export again and import it into FCP)
I've no problem if FCP tells me it has to correct some characteristics to fit with the desired FCP quality. But giving me strange error messages and not doing anything is a simple malfunction for this price I paid.
And I have a workaround, so why start with more workarounds.
I would like to have a solution. But Apple is not available directly, so I can claim this malfunction or do you have a mail address, where you can claim bugs in FCP?
Thanks for all your good intentions, but I want a program that works or at least tells me clearly, which standard is not fulfilled by the video I want to import (and why other Apple programs are able to deal with it). Especially if the price is not just a few dollars.

Why can't I import old imovies into idvd?

Why can't I import old imovies into idvd?

I have 68 GB free and the movie is a small one. The iDVD file is on my hard drive and in the dock.
Today I found a work around for this problem. While I cannot open the original movie, I can access the clips in the media folder. I put the clips together and made a new movie. And I can import this to iDVD by going to "share" in the menu and selecting iDVD.

Still photos imported to imovie change to solid green

i'm using all the newest versions of iLife and Aperture (as of 11/13/13)... i use iMovie to make slideshows from my photography because i like the controls better than in Aperture or iPhoto... however, since upgrading to Mavericks and all of the new iWorks, iLife, Aperture on my Fall 2011 MBA, when i import still photos into iMovie to make a slideshow, they have a propensity to be rendered, at least in previews, as solid green images (think green screen)... i'm using jpeg images that have been exported to a separate file from my Aperture library, all using RGB color... there seems to be no rhyme or reason to which ones render incorrectly and which do not... sometimes the thumbnail image appears as the solid green, most of the time, though, it will appear as a standard thumbnail image, but show up green on the preview screen. I have not tried actually exporting the project as a quicktime movie to see what happens. I have tried closing and reopening imove after import, but that seems to make no difference. if i delete the files and reimport, sometimes they will import correctly, but often they do not.
My iMovie files, as well as the exported jpg's are all located on my internal SSD. Is anyone else having this kind of thing happen?

I have been having the same problem with iMovie and the iPhoto library, where the imported pictures turn to solid green.
What I tried was to convert the photos to a video fileand import into iMovie - this is what I did:
- I opened up iPhoto and created a slideshow with the picture (or pictures) to be added to the iMovie project.
- Then I exported the slideshow to the desktop (or wherever you want) which creates a video file. I noticed it is mpeg-4 format, and I do not see anywhere to change this format.
- Back in iMovie, I imported the new video into the project either by Import Media or dragging it in, I guess either way works.
This seems to work for me so far, even though I'm still experimenting. But I am still disappointed in this, since it only happened since the upgrade to Mavericks and iMovie 10.

How to fix iMovie 08 problems under 10.5.3

iMovie problems under Mac OS X 10.5.3 linked to color system
After updating to Mac OS X 10.5.3, users may have problems with launching iMovie. For most, iMovie refuses to opens, and the usual fix of removing the iMovie preferences, caches, and other iMovie settings files, and then relaunching the program does not appear to help. One user reinstalled the program with no luck resolving the problem:
"I have the same problem. I've tried to reinstall the imovie, but it still does not work. I have imported a lot of video in iMovie. Please help!!! "
For other users, while iMovie would start, they could not open any projects or use the program.
One user, while not initially affected by this problem, found that after changing the color calibration of his Apple Cinema display iMovie suddenly wouldnt open just as described by others; however, upon reverting to a previous color profile iMovie became functional again. This indicates the problem lies somewhere in computer's color system configuration; and changing color settings seems to have fixed the problem for all affected users.
Fixes
Change the screen colors Go to the "Displays" system preferences and change the color output of the screen (either from thousands to millions, or vice versa) and relaunch iMovie. Somehow changing the display color depth modifies the color system so iMovie properly loads.
Calibrate the display While for some users calibrating the display resulted in the iMovie error, for others the problem was fixed by re-calibrating the display. Calibrating the display can be an involved process, but it is recommended to ensure your screen outputs the most accurate colors as possible. This option is available in the "Displays" system preferences under the "Color" tab.
More:
Correcting the problem by changing profiles suggests a permissions problem which repairing permissions won't fix. Use the terminal command
ls -al /Library/ColorSync/Profiles
Compare the permissions on the working and non-working profiles. If they are different, correct the non-working instance.
Everyone should read MacFixit Every Day

Another fix for iMovie launch problems We previously reported that, after updating to Mac OS X 10.5.3, users may have problems with launching iMovie. For most, iMovie refuses to opens, and the usual fix of removing the iMovie preferences, caches, and other iMovie settings files, and then relaunching the program does not appear to help. One user reinstalled the program with no luck resolving the problem.
We noted a few fixes for the issue, including changing scren colors and calibrating the display. Now some users have reported that temporarily adjusting screen resolution can allow iMovie to properly launch. The resolution can be changed back to normal after the update.
"Neither suggested trick worked for me. However I temporarily changed the resolution to 1024x768 and then launched imovie. I then went back to my native resolution of 1280x800 (white ibook) and now imovie always launches. Thanks for the tips"

No sound in file import by iMovie 2013 (version 10.0.2)

Hello,
When I import video File, there is no sound in iMovie 2013 (version 10.0.2)
My camera is a sony cam with hdd (model DCR-SR 190E). It's a compatible camera (sony dcr-sr 100 is same model)
The same import in iMovie 9.0.9 have no problem. The sound is present.
Have someone the same problem ?
Thanks
Arnaud

no idea ?
Up
thanks

Camtasia import to iMovie losses quality

I'm creating a number of screen capture videos and looking for high quality/best practice settings for Camtasia and iMovie. For camtasia I've been using 30 fps and recording in 1280 x 720.
I've exported to both mp4 and .mov for import to iMovie but the end result is a loss of quality when the files are imported. I just upgraded to camtasia 2.2 and still have the same problems.
I'm not sure what I'm missing. Are there any iMovie import settings or file management actions I should take after importing?
Any help would be appreciated.
-Bill

Yes, I realize this , I have made many movies but the finished product (a burned dvd using iDVD still presents the photos in a lower resolution. I am thinking it must be a bug in the computer. Someone suggested turning off the Ken Burns effect in preferences to improve the situation. It never happened on my non intel iMac 20in. This iMac (intel 20inch with 2 gigs of ram even) seems to be quirker than any other mac I have owned.
Joe McGarry

Import digital8 iMovie 11 problem

Similar Messages

Maybe you are looking for