Import Discussion Groups into Forums (7.0)

Hi,
is there a way to import old Discussion groups content into new Forums (7.0) application?
Regards,
Ladislav

Hi,
What is the solution ?
Regards

Similar Messages

In address book how do I move all cards from my 'last import' smart group into a new group?

In Address Book, how do I move all cards from my 'last import' smart group into a new group that I will create? So far I am not being allowed to Edit Smart Group!
Thank you x

Simon
You’re going to have a very big problem and very soon. These missing pics are the beginning of trouble.
the total size of all my folders on my 60gb internal drive is 46.5 gb, yet only 1.9 gb is available,
OS X needs about 10 gigs of free space on the hard drive for normal OS operations such as virtual memory and temporary files. Without this space the machine slows down as the OS hunts for free space, files become fragmented and applications begin to crash. The risk of data corruption increases exponentially.
You must, as a matter of urgency, make space on the drive. I cannot stress this enough.
You may be able to recover the pics from your camera card using an app such as MediaRecover
Regards
TD

Import Distribution Group into SharePoint as "Audience"

I've been searching these threads all day for a solution, and I haven't located one that answers my question...
We are creating a SharePoint3 site which will have 4 different departments as the audience for it. Due to the ingress and egress of employees & contractors, both onshore and off, attempting to maintain individual users
and permissions will be incredibly difficult.
Is there a way to add the Distribution Group into SharePoint so that all those people on the list can be provided access, with the same permissions, and maintained along with the DG? There will be little to no emailing from the site itself, we just
need a way to import the staff without having to do it manually.
Can this be done? And if so, can you help guide me through the process?
Thanks in advance.

Are you sure you want to use an audience? Audiences are for showing/hiding information, but are not to be used as a security boundary (permissions).
You can instead set up Active Directory Security Groups, then add those Security Groups to a SharePoint Group (or even down to individual lists/items). Add/remove members from the group (using ADUC, etc.) to allow/deny them access to the site.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

HT2486 How do I import existing Outlook contact groups into Mac Address Book?

After months of problems with Microsoft Outlook 2011 for Mac, I am switching to Mac Mail. I seem to have successfully imported my individual contacts into Address Book. However, I have been unsuccessful in figuring out how to import group contacts into Mac Mail.
So far I have created .txt files, (a separate one for each group), listing each e-mail address in that group separated by a comma. Can I input this information into Address Book somehow? If not, how else can I import my groups into Address Book in a more efficient way than manually entering them? Manually dragging and dropping names into each new Address Book group is not an option, since I have about 50 groups with 20-50 people in each of them. It would take me extraordinary amounts of time to do that, not to mention the frustration.
A second question: There are many duplicates listed in my address book. When I select Card>Look for Duplicates, it tells me that No duplicates are found. They most definitely exist, however. How can I erase them without having to manually delete each duplicate?

You can't transfer the groups, you'll need to do it the hard way.
As for the duplicates, how many accounts do you have in your Address Book?

Import Content into Forums (7.0)

I see that it is possible on Jive's website that it is possible to import content into Jive forums through xml.
I do not know of a way to do this with the forums available with SAP Portal.
Does anyone know if this is possible yet?
(What I am wanting to do is migrate content from a MS SharePoint discussion to SAP Forum.)

Hi Eric,
you might use the XML Import in the Jive Admin Tool. You see the schema definition here: [http://www.jivesoftware.com/products/forums/jiveforums.xsd|http://www.jivesoftware.com/products/forums/jiveforums.xsd]
Regards,
Michael

Import of material groups into hierarchy not possible (note 432339)

Dear All,
I am trying to replicate material groups (DNL_CUST_PROD1) from R3 system. Prior to this our SRM system configured as standalone and Material Hierarchy is already defined. When I am trying to replicate the material groups in SMQ2 I am receiving status as "sysfail" and further I am getting above message. In the message the OSS note also mentioned. In the OSS note they have given following solution
Error message "Import of material groups into hierarchy &1 not possible":
In transaction COMM_PRAPPLCAT, you specify that the hierarchy specified in the error message is to be used for application 'Purchasing' (02). This means that the material groups would be created in this hierarchy. Delete this setting in Transaction COMM_PRAPPLCAT. If hierarchy R3MATCLASS already exists, assign
hierarchy R3MATCLASS to application 'Purchasing'. Then the material groups are created in hierarchy R3MATCLASS. If you want to import the material groups into the hierarchy specified in the error message, you can also keep this hierarchy
assigned to application 'Purchasing' and deactivate the error message. Error message "Import of material types into hierarchy &1 not possible". You can do this in Customizing under 'Customer Relationship Management -> Master data -> Basic settings -> Define system message characteristics'.
My problem is I am not able to find out the path given in the OSS note ( i.e, Customer Relationship Management u2013 Master data) . Any one can help me in this regard ?
with regards
Ram

Hi ram
one upon a time supplier relation ship management and customer relation ship management comes under EBP node i.e ebp 3.5 versions.
/people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
plz visit Marchin blog to.o
since u r aleady in standalone but now you may try push material group from ecc to srm .
so you need to do set up all crm middleware settings in ecc and srm.
br
muthu

LDAP- When importing a Group it goes into Security Users and not Groups.

Hello,
I created a new LDAP Server
cn=GroupBI,OU=Groups,OU=Systems,OU=Milan,OU=Italy,OU=Countries,DC=u,DC=a,DC=g
Connection Test was ok.
The problem is on importing members of my group, on Security Import window instead of having the group drop-down list populated I have the user drop-down list populated with "GroupBI".
If I import this group (considered as a user by BI) it goes into Security > Users and not Security > Groups.
This does not make sense.
I'm sure this "GroupBI" is a group and not a user and the atribute type used is sAMAccountname
Any help?
Cheers

Let me tell how we did Authentication using LDAP
I havent imported any groups or users once the LDAP is set up and connection was successfull. I simply created the session variables USER DISPLAYNAME EMAIL and mapped to LDAP Variables uid, displayname, mail.
Authentication is done in this way by mapping the OBIEE variables to LDAP variables instead of importing the groups.
Now for Authorization I created the groups populated using some db tables and captured the group name and loglevel and applied filters on the group in the rpd for data level and permissions on the group in webcat for object level.
So just for Authentication purposes I think we can authenticate with out really importing groups as long as you map OB variables to LDAP
hope it helps
Prash

Import multiple contacts into a group from an email message

I have received an email from which I wish to import the additional contacts into my address book.
I used to be able to drag/drop them into my address book all at once, but can't any more.
I have also tried drag/drop into a Numbers file to try to convert to a csv and then import, but it copied all the addresses into a single field and I couldn't get them to separate.
UGH. How can I import multiple contacts into a group in my address book from an email message?

That is a few too many to do one at a time.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Issue importing a file into photoshop elements 11

I am new to Photoshop Elements 11. I am just playing around with it right now to get used to it since I've never worked with the program before. I am importing files from iphoto and it is working fine except for one thing. I imported a group of photos and while I was playing around in Elements (basically to get used to naming folders/albums/moving things around/etc) I deleted the folder I had imported, more or less to see what happens, and now when I try to import the same file into Elements again, it tells me that "the file selected to import did not contain supported file types or the files are already in this catalog." I cannot find these pictures anywhere within my catalog, so why will it not let me import them a second time? I have looked all over online for an answer to this and have come up empty handed. If someone knows how I can get this group of pictures into Elements, please let me know! I'd like to start practicing with the editing options but need these pictures in the program first. (I did also create an album from the file I imported, again to practice moving things around within Elements, and when I deleted the Folder the Album went away too.) I am still able to import other files from iphoto, it is just that this one particular file will not transfer....is it because I deleted it and now it somehow does not recognize the file??

Welcome to the forum.
As you have reposted to the Photoshop Elements Forum, where you will get quick and expert help, I will Lock this thread, and all discussion can take place in the Ps Elements Forum.
Good luck,
Hunt
[Thread Locked]

Has anyone been successful importing h.264 into Encore?

First, my system and goal:
A MacPro with 2.66mHz dual core and 12 gigs of RAM.
Multi Terrabytes of space.
I shoot on a Panasonic HVX-200, edit in Final Cut Pro and output Quicktime files as the basis for rendering to DVD and Blu-ray. I shot this stuff in 1080i. The camera codec is DVCPROHD and that is what I output to also.
I am trying to burn Blu-ray discs. I have an external Pioneer BDR-203 Blu-ray burner and it works fine.
I have done my tests and have decided that for Blu-ray, h.264 is far superior to mpeg2 in look and file size so I am sticking with it.
Here is the issue (and I have scoured this forum area and found no one discussing or solving this issue to date):
I have made hundreds of different DVDs with DVDStudioPro and am very familiar with it. Not to get off on a tangent but my beloved Apple has decided to betray me by not supporting Blu-ray (the ONLY way to output HD for us independents) so I studied up on Encore and have been using it to format my latest project to HD. The interface works pretty nice and even has some superiority to DVDSP but you have to have the patience of JOB to see your results. 5 Day (Remember. That's 24 Hour Days) Rendering is my tops so far. (OK. Full Disclosure... the documentary is 3 hours and 15 minutes long BUT DVDStudioPro took the same Quicktime files and crunched them down to mpeg2 for the DVD in about a day) Anyway about 6 days ago I had a 3 day render session that crapped out on me as it was finally recording to disc. For some reason it didn't like the BD-RE disc I had in the machine and just bagged the whole process. When I put in a new disc it just started rendering All Over Again. After that debacle I gave up on that method and now am rendering to BDMV folders which I then burn to disc using Toast. (While I am writing this my fingers are crossed that it will make it to the end - it's been another 3 days...)
I provide the details above to show why I am more than dismayed that I cannot figure any way to import h.264 files INTO Encore from another renderer. Either Compressor or Encoder render much faster than Encore. So I have tried render my project to a variety of output types from both Apple's Compressor and Adobe's Encoder with no joy any way I try.
(as a side note I am also dismayed that when I made a change to a MENU, Encore decided to encode The Whole Project Again rather than just the menu part...)
One of my latest file testing adventures was based on a theory that the problem has to do with DVCPROHD recording to 1280 x 1080 anamorphic rather than 1440 x 1080 (the "expected" frame size for 1080i). I fooled with that a half day but could not get either renderer to generate any test material from my FCP output that Encore would burn without re-rendering. By that I mean I cajoled and tricked Compressor and Encoder to output 1920 x 1080 files; 1440 x 1080 files and 1280 x 1080 files (all h.264) to see if Encore would recognize any of them without re-rendering them. No Luck.
So. Has anyone had success importing h.264 into CS4Encore from anywhere (but particularly using the same or similar gear I am using)? The Encore literature really doesn't give you much to go oon.
Lately I am very inclined to think the problem has something to do with this 1280 x 1080 DVCPROHD issue but I can't say for sure. I offer that as a suggestion if anyone else with a similar production stream is having the same problem and maybe it will trip a switch in their mind for a solution.
I like the Encore interface and design possibilities you have by swinging back and forth from PShop and After Effects but using Encore's renderer is like Chinese Water Torture.
Thanks for your help.

Brian,
I got your test file into Encore and got Encore to show its Blu-ray transcode status as "Don't Transcode".
Screenshots:
PrCS4 Export settings:
EnCS4 Project Panel:
Since it's hard to make out the En Project panel, I'll attach the same image to another message.
-Jeff

How do I import multiple images into single individual cells?

Hi folks,
I'm new to the Mac (yeah!) and imagine there just has to be a way to import a bunch of images into separate cells in Mac "Numbers" ... am I right?
Essentially what I'd like to do is a file folder with 600 images in it, and import those directly into Mac Numbers with one picture being assigned to it's own cell. So if below were a spreadsheet it would look like this:
Actual Picture - Picture Name - Item Description ... and so on.
I'm trying to work with inventory items, and this is the only way I can think of doing it. Suggestions!?!?
Here is a link to creating a macro in Excel to do a similar thing:
http://en.kioskea.net/forum/affich-269046-adding-a-loop-to-macro-to-insert-pictu res
Thanks for your help.
D

D,
I guess you're taking another shot at getting a response. You risk getting parallel discussions going with the same content.
What you are contemplating seems logical enough, but I think you will find that it is impractical in Numbers. Given the size of photograph files these days, you will choke Numbers in short order. You will have to be careful that you embed only photos large enough to be of use/viewable, and keep your full-sized copies elsewhere. You might find that an Apple Script can do the import for you, but otherwise it's drag and drop from the Media Browser.
Jerry

Is there a way to import a group of layers in one project in to another project ?

Hi all,
I'm currently using After Effects 5... yes that is version 5, not CS5.
I'm trying to figure out if I can import a group of layers and their applied Effects in to another project while keeping all the editable attributes and the positions of the imported layers with respect to one another.
I see that I can import a AEP project file in to another project via IMPORT FILE, but that just brings the raw layers/files in to the project window and does not place the layers in the timeline with all of their positions, Effects and edited attributes, the way that I'd like.
I also tried Pre-Composing the layers, but that does not leave them editable once a pre-comp has been made... it just makes the 7 layers that I want to import in to another project all one layer and does not leave them editable the way the the 7 layers are separately.
In Adobe Premiere, there is an actual "IMPORT PROJECT" selection under IMPORT that allows me to import an entire project file in to another project and lets me place the imported project where I want in the new project timeline... that is what I'm trying to do in After Effects.
I realize that there may be an easy way to do this in one of the newer versions of After Effects, and one might say, "just buy the new AE CS5", but I figured out allot of things on my own so far and I like After Effects 5 for what I'm doing now... maybe later on the newer version.
Thanks for any input,
digi

Hi Andrew,
No, the two threads that I wrote back to report finding that old 1999 plug-ins package that were removed were...
Cannot find "Caustics" and "Wave World" Effects in After Effects downloads
...origianally at this link, but it is now gone and also missing from my "Discussions" list...
http://forums.adobe.com/thread/959158
and
Is there an underwater effect that can be produced in AE 4.1 ?
...originally at this link, and it is also gone and missing from my "Discussions" page...
http://forums.adobe.com/message/4151249
I had saved the links to those threads with bookmarks, but they were removed the day after I posted about finding those plug-ins.
I wanted to get some info from earlier in the thread on one of those and when I went back they both were gone.
I was able to find those two threads by doing a site-webcach search on Google to see if there was a snapshot of each thread in Google's cache... I did find shapshots of those two thread but they were taken the day that I first posted the questions before any replies or subsequent posts by me were posted. Below are the Google cache links to those snapshots of those threads' pages, but as you'll be able to see, it only shows my original questions before all the replies by you and others on the forum and my final report of finding the plug-ins package...
http://webcache.googleusercontent.com/search?q=cache:S06cU1F1-C4J:forums.adobe.com/thread/ 959158%3Fstart%3D0%26tstart%3D0+site:http://forums.adobe.com/thread/959158&cd=1&hl=en&ct=c lnk&gl=us
http://webcache.googleusercontent.com/search?q=cache:3dtym60qrHcJ:forums.adobe.com/message /4151249+site:forums.adobe.com/message/4151249&cd=1&hl=en&ct=clnk&gl=us
Having the Adobe forums Gestapo remove those threads is a little like burning old software books... meaning, I guess Adobe just doesn't want people discussing old software downloads, even though I did not post the actual link for the the old "AE 6.0 Bonus Plugin Pack" and "AE 5.5 Power Pack Plug-Ins" that I found. I only reported back on those threads that I found the plug-ins packages after several lengthy Google searches. Since those plug-ins packages were no longer available from Adobe, I thought it was quite a find to be able to track them down elsewhere after all this time. They were 12 and 13 year old plug-ins packages, but they had been posted only in the last couple of years.
Someone else on one of those threads had also told me that AE 6 plug-ins would not work in AE 5, but that turned out to not be true... I don't remember who that was... maybe that was the person who removed my threads because he/she didn't like having a thread that indicated that he/she was wrong.
Anyway, thanks for your info again today... very, very helpful.
digi

I can't import raw files into lightroom

I have been using lightroom 4. I shoot with a nikon d300s. I recently used a nikon D610 and now it says preview not available. It also says the the raw images aren't able to import. So I recently upgraded to Lightroom 5 and it still says preview not available. I need some suggestions on how to import them.

I don't use nikon software. I just use lightroom. I just got lightroom 5. I tried to update to 5.3 but couldn't find the location where to find it.
Sent from Yahoo Mail on Android
From:"dj_paige" <[email protected]>
Date:Thu, Apr 23, 2015 at 10:22 AM
Subject:[Photoshop Lightroom] I can't import raw files into lightroom
I can't import raw files into lightroom
created by dj_paige in Photoshop Lightroom - View the full discussion
Do you have Lightroom 5.3 or higher?
Did you use Nikon software at any point on these photos?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7470470#7470470 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7470470#7470470
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Importing excel data into oracle tables

Hello gurus,
Importing excel data into oracle tables..
I know this is the most common question on the thread ...First, i searched the forum, i found bunch of threads with loading data using sqlloader, converting excel into .Txt, tab delimited file, .csv file etc....
Finally i was totally confused in terms how to get this done....
Here is wat i have
   - Excel file on local computer.
   - i have laod data into dev environment tables(So no risk involved, but want to try something simple)
   - Oracle version 11.1.0.7
   - Sqlplus and toad (editors)
Here is wat i like to do ....i dont know if its possible
    - Without going to unix server can i do everthing on local system by making use of oracle db and sqlplus or toad
   SQLLOADER might be one option...but i dont want to go the unix server for placing files and logs and stuff.
Wat will be best and simplest option to do?? and wat format will best to convert from excel into csv, or txt or tab delimited etc.....
If you suggest sqlloader, any code example will be greatly appriciated.
Thank you so much!!!

Hi,
user642297 wrote:
Imran,
This is increadible option in toad!!! It works absolutely sweet!! I have toad 9.7 version. IT works great. Thank you so much!!You are welcome :)
Well i have further discussion on this ....this option is great if you doing in staging or development area. What if your doing in prod?? If you automating the sqlloader then how do u do it?? I think we still need to stick with traditional approach of laoding data by making use of SQLLoader right ?? If m wrong please correct me.well, in our case, we do have access to a custom schema in prod where we create the staging table and load the data from datafiles.
try this:
load data
infile 'C:\dest.csv'
into table dest_table
fields terminated by "~" optionally enclosed by '"'
TRAILING NULLCOLS
(name,
owner_nm,
description_column,
UPDT_DT DATE 'MM/DD/YYYY')
{code}
you can get more info about sql loader and your error here:
http://download.oracle.com/docs/cd/B10501_01/server.920/a96652/ch05.htm
http://www.allinterview.com/showanswers/53766.html
And one more quick question ...i found an example of control file , in that i see .dat format file. Is it a data file ?? can i try that option ?? But in excel i didnt see to convert the .dat format file.
Any thoughts ???
It is same as a delimiter text file.
steps to create a .dat file (from a excel file):
1. Insert a column between two columns and populate it with the delimiter (in our case, it is ~)
2. Save the file as unicode text.
3. Open the file in text editor and remove all the tabs (find an replace with blank)
4. Save the file as "DEST.dat". Select encoding as UTF-8 while saving.
5. Your .dat file is ready.
Regards
Imran
Edited by: Imran Soudagar on Apr 22, 2010 10:22 PM

Importing InTouch data into Mail in OS 10.4.8

How do I import the data from my old InTouch program into the new Mail Application?
Thanks.

You might want to check the Mail forum:
http://discussions.apple.com/forum.jspa?forumID=753
Thank you. I will check it out.

Import Discussion Groups into Forums (7.0)

Similar Messages

Maybe you are looking for