Import DNG preference not working

I have set the import extension as dng to auto import as dng from a Canon 40D. Doesn't happen and after I import I have to convert the raw to dng. Is there anything I need to do in addition to setting the preference?
Jay Gould

The import extension is only a naming preference, either 'dng' or 'DNG'. It does not guarantee that an import will convert to dng. You still have to ensure that you convert to dng within the import dialog.

Similar Messages

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Importing bookmarks I go to file and the IMPORT link is not working ... not Illuminated ... what can I do?

I want to import bookmarks from Explorer and I go to File Tab and the IMPORT link is not working or not illuminated?

Make sure that you not run Firefox in permanent [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Permanent Private Browsing mode"

"Do not import duplicates" is not working

The "Do not import duplicates" box is checked for all imports but is not working. This is both for my Nikon DSLR, my Canon S-95 and my iPhone. This was happening with both Snow Leapord and Lion as operating system. I have been using Aperture since the first release and only in the last few months has this been an issue. Any thoughts?

There's a known (and old) bug when duplicate identification fails on photos
that have been imported from another catalog.
Sent from phone.

DNG Converter not working on a qualified camera raw photo

DNG Converter not working on a qualified camera raw photo Always comes back with this Message " check if camera is recognized. "

Supported Cameras Camera Raw plug-in | Supported cameras

1.4 - Important sites will not work & why are the AIM / Facebook contacts integrated with my phone contacts?

Two issues I am having with my phone.
1 - Before upgrading to the 1.4 software patch, I was able to visit some sites that I use regularly, one being www.hotschedules.com. I bartend and use my phone to look at my weekly schedule but now it will not work. Just to test it, I used a buddies phone who had not upgraded to 1.4 and the site opened JUST FINE!
2 - I want to use facebook and AIM on my phone but for some (stupid?) reason, ALL of my facebook and aim contacts get listed in the SAME LIST as my phone contacts. I do NOT want to scroll through hundreds of contacts to find someone. Yes I know there are shortcuts but why even do this in the first place?

Hello eculley and welcome to the forums;
I attempted the website you mentioned, and it loaded fine on 1.4.1.1 on my Sprint Pre. We did identify some issues with websites on 1.4, and this should be resolved with 1.4.1. I know 1.4.1 is not available for Verizon yet, however it should be available soon.
As for Facebook contacts, they show in the Synergy contact list by design, so that you can see all of your contacts in one master list. If you do not want those contacts showing in your Contacts app, you can open Preferences & Accounts for contacts and remove any account you don't want to see contacts for.
Hope this helps!
TreoAide

Import metadata xml not working

Import metadata as Xml Datasource with network files(using url) not working and giving a message cannot connect - invalid url.
but the same url can be run from a browser.
What can be the problem?

Hi Radosla,
Yep, thx for the hint.
Looks like i put it on th test server in compatibility mode, but not on the real server.
Changing this with F12 to IE 8 did the trick!
Regards
Frederik

Import scenario package not working

Hi exports,
On a test environment i created a scenario which i now would like to transfer to another server.
I exported the correct scenario, but on the other server, the import is not working.
I can submit my package, it shows that there is no current version of this package, but hitting the "IMPORT" button doesnt do anything.
Im using (on both servers) SAP B1 9.0 pl 08 with the same integration framework.
Any idea's on how to solve this?
Kind regards
Frederik

Hi Radosla,
Yep, thx for the hint.
Looks like i put it on th test server in compatibility mode, but not on the real server.
Changing this with F12 to IE 8 did the trick!
Regards
Frederik

Bridge and Camera RAW preferences not working

I'm setting up a new Macbook Pro, late 2013 15", 10.9.2
CS6 Production Premium, Also have Indesign CS6, LR5, Acrobat Pro 11. Camera RAW is version 8.4. Everything is up to date.
Bridge and Camera RAW preferences are not working correctly. Bridge prefs related to Bridge display, e.g. color theme, text beneath thumbnails, favorite locations, etc.. all work fine. Bridge prefs open and close fine with no errors. "Double Click Edits Camera RAW Settings in Bridge" does not take. Photoshop launches to open Camera RAW regardless of whether this is checked or not. Camera RAW preferences will not open. Selecting "Camera RAW Preferences" from Bridge does nothing. Camera RAW seems to work fine hosted by Photoshop.
I tried a new user with the same results.
What's up with this? Anyone else seeing this? Solution?
--David

fixed it with this work around
Camera Raw 8.4 | No metadata or Camera Raw edit

Sd photo import camera kit not working with iOS 8

I bought an Apple brand sd card photo import camera kit for the iPhone 5 (lightning cable) a couple years ago. It no longer works with iOS 8.x. I now have an iPhone 6 Plus and it still does not work. I get the error "This accessory is not supported by this iPhone." Since it is Apple brand it should work.
I have googled and searched the forums and found no leads on this. I was hoping with the latest 8.3 release it would be addressed. Does anyone know how to get this to work or is it an apple bug?

One article that might be helpful is here (suggesting you need HUB if it's drawing too much power):
http://support.apple.com/kb/HT4106
@ rotorcraft:
It has to have a DCIM folder, but the directory after the DCIM folder, and the files themselves, have to follow DCF rules (http://en.wikipedia.org/wiki/Designrule_for_Camera_Filesystem)..if it's the structure created by the camera it should be fine but if you change the folder to something other than DSC_xxxx and you change the image filename to something other than ABCD1234.whatever then it won't show up.
You can double check if the kit is being recognized at all in Settings -> About, then scroll to the bottom, it should say like Apple Card reader or something I forget. If it isn't, I would just reboot

DNG SDK not working on Mac (Leopard)

Hi, I am writing a program to create dng files via the latest adobe dng sdk. I follow the same basic recipe as outlined in the example dng_validate code. On a Windows PC, the created thumbnails and previews appear just fine. However, the same code on the Mac creates dng files that do not show the thumbnails or the previews. In addition, apple programs like Aperture do not recognize these dng files either, even though they validate correctly by the provided dng_validate program on the Mac. Is this a bug in the Mac version of the SDK? OR, are there additional steps that are needed for these dng files to work???

Hi Eric,
An example image is given below. The first one (test.dng) is the image we created with the Adobe DNG SDK on a Mac. The second image (test_dngv.dng) is the result of running it through the dng_validate program (which uses a compressed image by default with the -dng option), and therefore much smaller in size.
Neither of these images produce visible thumbs or previews on the Mac (not in any of the Apple programs such as Finder, Preview, Aperture, iPhoto etc.). However, when placed onto a Windows machine, they appear just fine everywhere.
As the previous poster has indicated, this may not be the fault of the Adobe DNG SDK, but for all practical purposes it is a hindrance to us. Whoever is at fault, the bottom line is that the DNG format is proving to be less portable than other image formats such as TIFF or JPG. We have no problem moving these other formats from any computer to any other computer, whether it be Mac or Windows. We are trying to support Adobe and its efforts with new standards, but this is costing us valuable engineering time in dealing with these matters, that just do not exist with other formats.
And, I apologize if this is presented in the wrong forum. However, we would appreciate if you can help us in this matter. Obviously, it can be done, since the Adobe DNG Converter program is capable of generating dng files with proper thumbs and previews on a Mac. It is just not documented anywhere for developers trying to work with the DNG SDK.
http://www.davidklepacki.com/test.dng
http://www.davidklepacki.com/test_dngv.dng
Thank you,
David

Mountain Lion feature preferences not working

Ever since Mountain Lion was released some of the new features preference panes wont open for me. Every time I try to open one, my Settings app just freezes and I have to force quit it. Things that wont open: Security & Privacy and adding Twitter and Facebook accounts. My Messages app doesnt even work, I can send and recieve but nothing shows up in the app. I've been looking online and trying many different things (removing preferneces, adding preferences from another account where they work) and I have a test account where everything works. Any other things I could try?
EDIT: I forgot to add that my AppStore freezes everytime I open it too. I can view the Updates Tab but if I click anything else it freezes.

Hi,
IF you have another computer you can transfer things like an whole Users account to your Mac or in some cases you can transfer the whole thing, Applications, And Users normally.
There can be issues with this as some Applications may not work in a newer OS
Some Preferences (what is kept in the .plists in the User's Library/Preferences) may not work properly with newer version of the apps they go with.
For example iChat in Lion has been replaced by Messages and iChat 6 should not be installed /Transfered/Migrated to Mountain Lion
Repair Permissions is done with the Disk Utility in the Applications/Utilities folder.
I am not sure the Disk Utility is accessible on a Restore Boot (CMD+ R)
This could be really simple such as the Contacts app > My Card (Head And Shoulders icon) not being set to your details and App like Messages that make use of the info can't read it.
On the other hand it could be a lot deeper than than and you may need to Restore the whole OS (CMD + R on Start up)
9:08 PM Monday; November 5, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

?Import ? Statmenet Not working When Deploying it on Server.

What should be the process if I want to use import statement in RTf template on Standalone BI Publisher (Verision 10.1.3.4)
I have uploaded both the main.rtf and include.rtf and I have put the <?import:include.rtf?> in main but it does not work.
Please advise
Thanks

I did that but it complains that file not found. I used the following statement
MAIN FILE
<?import:include.rtf?>
<?call:TC?>
SUB TEMPLATE (include.rtf)
<?template:TC?>
TESTING THIS Include Page
End Template
It complains that file not found.
I have uploaded both the file BI Publisher Console.
May be I am putting the wrong path or something now sure.

Import package does not work - beginner help

Hi, I'm a beginner with java. I just trying to figure out how to use packages. I followed everything in the tutorial, but I can't figure out why my simple example does not work.
I made the following directories three, for the sake of the example.
in /home/username/Desktop I created a directory named it
inside it I created prove
inside prove I created test1 and test2
Inside test1 I created the following sample class:
package it.prove.test1;
public class HelloWorld
     private String message;
     public HelloWorld(String message)
          this.message = message;
     public String getMessage()
          return this.message;
}in the directory test2 I created this other one:
package it.prove.test2;
import it.prove.test1.HelloWorld;
public class HelloWorldProgram
     public static void main(String[] args)
          HelloWorld hw = new HelloWorld("Guten Tag, Welt!");
          System.out.println(hw.getMessage());
}So now I have this three:
it
it/prove
it/prove/test1, it/prove/test2
As I said in test1 there is HelloWorld.java and in test2 HelloWorldProgram.java.
When I compile HelloWorld.java, it worked fine.
When I try to compile HelloWorldProgram.java, the compiler says that cannot find package it.prove.test1..
Why that? What did I make wrong?
Sorry both for my bad english (it is not my first language) and for the really trivial question (I'm a really beginner).
Tnx to whoever will help

Assuming you are running on Windows here.
Packages are directly tied to the classpath. Before java can find the it.prove.test1 package, it needs to be a part of the classpath. To make this possible, you need to add the root of the path, where the 'it' directory is in, to the classpath, like this:
javac -cp .;/home/username/Desktop file.java
the -cp switch tells java which classpath to use; it consists of two elements:
. = current directory
/home/username/Desktop = the directory containing the 'it' package root
When run like this, it should work. The same goes for running the code, you would run it like this:
java -cp .;/home/username/Desktop it.prove.test2.HelloWorldProgram
Hope that gives you the hints you need.

Import tabular data not working with Word file

The File-->Import-->Tabular Data feature works fine
with a text file, but only puts in table tags
(<table></table>) when I use a Word file (same data
with same delimiter in both files).
Any idea what's going on?

You will not be able to use Import Tabular Data with a *.doc
file - how
would DW know what to import when you give it the entire
document? You
would need to use either a plain text file, as you have found
out, or save a
new document containing only the table, and import that.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Laura MS" <[email protected]> wrote in
message
news:flte4o$qmf$[email protected]..
>I didn't know you could do that, so I tried it. However,
it imported my
>file as is, not as a table, which is what I need. Thanks,
though.

Import DNG preference not working

Similar Messages

Maybe you are looking for