Import doesn't work for me on Vista

I am running on Vista. I try to import from a CF card to my Users/John/Pictures directory. Although Lightroom sees my card and the files on it, when I try to do the import I get a dialog box saying "The following files were not imported. Could not copy a file to the requested location." with a list of all the files on the CF that I had tried to import. I assume this means that there is some sort of permission problem writing to the Pictures directory. Since other programs (e.g. Canon Zoombrowser ) write to that directory with no problems, this would seem to be a Lightroom issue.
Anyone with any ideas or a solution?
Thanks,
John

If you did a search on Vista, you'd discover that 1) LR is not fully compatible with Vista, and 2) one of those incompatibilities is reading from a CF card.
- Pierre

Similar Messages

Receiver determination doesn't work for same IDoc type but in differentSWCV

hi guys,
we have an emergency now. Receiver determination doesn't work for same IDoc type but in different SWCV.Please check below for detail.
1. The process flow is : R/3 IDoc -> XI -> Third party system
2. In previous release R13, IDoc ORDERS05 was imported and used in XI and software component version is R13. And receiver determination was created.
3. Now, in new release R17, IDoc ORDERS05 was imported from R/3 to XI again and software component version is R17. And in R17, the receiver determination created in R13 was used for both old interface(R13) and new interface in R17.
Then we encountered the problem, both interfaces doesn't work now, even we deleted the receiver condition(In R13, IDoc ORDERS05 was sent to system A, and in R17 IDoc ORDERS05 was sent to system B, RCVPRN was used as an condition).
Does anyone encounter this problem? really need and appreciate your help.
-Eddie

information from monitor:
Status Sender Service Sender Namespace Sender Interface
reschedul XXXCLNT100 urn:sap-com:document:sap:idoc:messages ORDRSP.ORDERS05
columns for "Receiver Service","Receiver Namespace", "Receiver Interface" are blank
And then double click records in monitor, go into detail information...
Normally there's lots of setps existed, such as
Inbound Message ( CENTRAL )
Receiver Identification
Interface Determination
Receiver Grouping
Message Branch According to Receiver List
Technical Routing
Call Adapter
But now there's only one setp -
"Inbound Message ( CENTRAL )" existed, no any another setp..., and payload in inbound message looks good.
And in SMQ2, I checked the queue information, found there's an error - "An exception occurred that was not caught." No any other detail information for this error.

Website doesn't work for downloading driver software

http://support.hp.com/us-en/product/HP-Officejet-Pro-8600-Plus-e-All-in-One-Printer-series---N911/43... doesn't work for downloading driver software, the link to your page sends me here and it just hangs

Suz1st wrote:
I also had download issues re: with getting a newer driver version.
I have an HP Photosmart Premium (All-in-One_ model c309g-m )
can you send me a link for that driver?
What operating system? ForXP, Vista or Windows 7 download the latest software from the link here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Microphone doesn't work for Creative Live! Cam Socialize HD AF HD Webcam

Microphone doesn't work for Creative Live! Cam Socialize HD AF HD Webcam (for Windows 7).
I have to use external microphone from Logitech now.
I send few emails to Customer Service. They answered once to check my Device Manager and disappeared after that. I'm really disappointed.
It looks like the drivers for Windows 7 are wrong.

hey Killthebeeping,
if you have the USB Mic connected kindly remove it first then uninstall the audio drivers for your B510.
let windows install its generic driver.
once done plugin your usb mic and test it again.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

[kde] "Only show tasks from the current desktop" doesn't work for max

Hi,
I have two monitor setup (laptop + main monitor) and I would love to use "Only show tasks from the current desktop" option in KDE Task Manager but for some strange reason it doesn't work for me. Well, it works but only partially - for restored/unmaximized windows. When I maximize one it appears on the Taskbar on both screens. Is this normal? May it be due to the fact that I've placed Taskbar on top of the screens?

Did you miss this bit
"Graphics : 1 GB NVIDIA Quadro 600 (1DP & 1DVI-I) (1DP-DVI & 1DVI-VGA adapter) (ELGA13) 1"
And the final image clearly states the type of Graphics Card he has
Photoshop CS6 GPU FAQ
Tested video cards for Photoshop CS6
Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. The minimum amount of RAM supported on video cards for Photoshop CS6 is 256 MB. Photoshop 13.1 cannot display 3D features if you have less than 512 MB of VRAM on your video card.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2012, you can assume that the card will work with Photoshop CS6.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500, 600 series
nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows & Mac OS)

Import doesn't work anymore

I just installed the lastest version of Forte and now import doesn't work. I was importing my own class files located in the same directory as the main class. It work just fine before I upgraded.
Here's what import section used to look like:
import java.lang.Math;
import EDU.emporia.mathtools.*;
import LoadFileBox;
import SaveFileBox;
import InfoBox;
import ReportErrorBox;
import javax.swing.*;
import java.awt.*;
import java.io.*;
Here's the error message:
Java Code/Modeler.java [17:1] '.' expected
import LoadFileBox;
^
It says that for all the custom ones. After I do add a .* to all of them it gives:
Java Code/Modeler.java [17:1] package LoadFileBox does not exist
import LoadFileBox.*;
^
The files are there. They are named:
Modeler.java (the main class)
LoadFileBox.java
SaveFileBox.java
InfoBox.java
ReportErrorBox.java
They are all located in the same directory. I did try to compile the ones that don't import anything custom first and work my way up, but that failed.
Please help me, I hate Java with a passion but this damn assignment......

... and that helps because they have made importing classes that are in the default package (which is what you don't need to do in the first place) illegal.

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

Push notifications doesn't work for apps like (fb viber , whatsapp etc ) iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

Sorry, I've forgotten the actions done.
I've restarted the iphone, and I've recovered a previous backup.
Thanks.

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

download the new you tube apps in i tunes, in os6 just pick a video in the photos apps and select share, the old you tube app icon will appear

I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.

I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.

Did you fail to look at the requirements before purchasing?
All sales are final. You can try contacting itunes support and asking for an exception

Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through j

Certainly I realized that Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through jquery or javascript.
e.g.
In Felix Console , in Apache Sling JCR Resource Resolver configuration I have added following mapping.
/content/myproject/-/
So If any anchor tag is there like <a href="/content/myproject/en.html"> click me </a> then it will be mapped to "/en.html" automatically.
But the problem is there in following scenario.
I have an anchor tag as follows.
<a href="#" id="test"> click here </a>
And I am assigning the href to anchor through JQUERY.
<script>
$("#test").attr("href","/content/myproject/en.html");
</script>
Ideally this should have been mapped to "/en.html".
But it is not mapping to "/en.html". It still shows "/content/myproject/en.html".
How to resolve this.
Thanks,
Sai

In a servlet you have access to the resourceResolver so if you know which attributes contain links then it's relatively easy to apply resourceResolver.map to those links.
Your challenge is clearly how do you know which attributes are links and which aren't. Its is the same challenge that makes parsing the response and rewriting it on the way out difficult - the JSON doesn't have any semantic meaning so how do identify which attributes require rewriting. There really is no good answer ot that question in my experience - all the options have down sides.
Create some convention - all attributes matching this pattern X get mapped before being converted to JSON (could be attributes whose name ends in link, or it could a convention applied to the value of the attribute - if the attribute is a string that starts with /content apply the resource resolver mapping. In this case you have train your developers to follow this convention which is the down side.
Create some configurable list of attribute names that require mapping. This is brittle, requires training and is easy to break.
Implement a client side version of the resource resolver mapping. It wouldn't be as full proof as server side mapping (because that takes into account but you could make it work for simple logic like stripping of /content/site/en. If ou are just trying to solve the simple version of this issue - stripping off the top of the repository path this might be your best option.
Not worry about it and set up Apache 301 redirects that catch any long URLs and redirect them to short URLs (so configure apache to look for any URL matching /content/site/en and strip off /content/site/en and do a 301 redirect to the shortened URL. You end up with a lot of extra HTTP request because of all the 301s but it would work (I wouldn't recommend this option - but it is possible).

HT201263 Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTune

Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTunes.Help! Thank you.

Besweet, I'm having the very same problem with 60GB colour which was bought new and worked for 6 months before suddenly just not being recognised by PC. I hadn't changed anything at all.
I've followed all troubleshooting advice and reinstalled and updated iTunes and iPod updater software but all troubleshooting routes seem to hit the dead end of either the need to access the iPod via the PC (which isn't possible as it's not showing up at all) or the iPod in disc mode stuck at "ok to disconnect".
It's still under 1yr warranty so will have to take to a dealer.
I'm sorry that's not much help for you but at least you know it's not a unique problem.
PC Windows XP

How do I uninstall Firefox 4 & get previous version back? The new upgrade has problems & doesn't work for me.

How do I uninstall Firefox 4 and get the previous version back?
The upgrade has many problems and doesn't work for me.

new version is the worst Firefox ever, no lip.

Import doesn't work for me on Vista

Similar Messages

Maybe you are looking for