Import emails, call logs, etc from another BB

I have 2 BB's. My original, a Curve 8330, was in to get repaired so I was using a World Edition (8830??). Now that I have my original Curve 8330 back again, is there a way to transfer/import the emails & call logs from the World Edition BB so I have all of them on my original Curve?

Hi there!
The Device Switch Wizard should do what you desire. See these:
KB16291 How to use the Device Switch Wizard to switch to a new BlackBerry smartphone
KB05421 What is Switch Device Wizard
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Had to restore iphone from a backup that was done 1 week ago. any way to get back the texts, call logs, etc. that happened within the last week?

this morning, i had to restore iphone from a backup that was done 1 week ago. is there any way to get back the texts, call logs, etc that happened within the last week?

No

How to call a servlet from another servlet

hi everybody,
i have a problem, i have to call one servlet from another one.
Everything works on my pc, but when i install the application on the customer's server i got an error about an Uknown URL followed by the name of the machine.
Wjat i do is the folloqing :
String urlString = request.getScheme()+"://"+request.getServerName()+":"+request.getServerPort()+"/"+servletName;
URL url = new URL(urlString);
HttpURLConnection conn = (HttpURLConnection) url.openConnection();
the variable servletName is the name of the servlet i have to call.
Is there another way to call the servlet ?
All the servlet are installed in the same server.
Any suggestion ?
Cheers.
Stefano

Sweep is correct about requestDispatcher being another approach for inter-servlet delegation; the only issue that i recall with this approach is that it defaults the method of the destination servlet to the one it was called from...for example, calling servlet2 from within servlet1.post() resulted in the dispatcher attempting to utilize servlet2.post() - i believe that i searched for a parameterize solution to no avail :( (ended up handling the request by placing a "fake" doPost() in servlet2 that simply called servlet2.doGet())
however, if your application is functioning correctly on your pc/webserver then the problem may be external to servlet communication (e.g. client webserver's ports not configured or blocked, missing runtime classes, etc.)
my suggestion would be to set aside the programmatic concerns for the moment - what is the response if you open a browser on a client's machine and access the URL in question (i.e. http://clientserver:port/stefanoServlet)? If it will not respond to access in this manner then it certainly won't when your application calls for it.
It's possible that there is a coding error but, given the info supplied, i'd start examining the environment, first. Let us know if you have any luck with the test i recommended or not (please provide abundant detail). Or, if you've found the solution then you may want to post back with a quick blub so the next person knows how to escape the trap.
D

How to call one .SWF from another?

How do I call one .SWF from another. I built a very beefy
base .SWF, and want to add music overlay, and an intro slide show
to the exsting Flash animation, but put it in a second .FLA/.SWF
file. How do I call one from the other?
This will be embedded in an HTML file but I assume this is
superfluous to my question.
F.Z.

I think you should open that Another SWF (FLA),
and add some actionscript..
For example, you could create a movie clip, and write
actionscript in the
first keyframe:
loadMovie("
http://www.somewebpage.com/movie.swf",
this);
"FredZimmerman" <[email protected]> wrote in
message
news:ftnjas$mj5$[email protected]..
> How do I call one .SWF from another. I built a very
beefy base .SWF, and
> want
> to add music overlay, and an intro slide show to the
exsting Flash
> animation,
> but put it in a second .FLA/.SWF file. How do I call one
from the other?
>
> This will be embedded in an HTML file but I assume this
is superfluous to
> my
> question.
>
> F.Z.
>

Calling a method from another class... that requires variables?

I'm calling a method from another class to change the date (its a date object) in another class.
I keep getting the error 'setDate(int,int,int) in Date cannot be applied to ()'
My code is:
public int changeDate()
cycleDate.setDate();
}I'm guessing I need to pass 3 parameters (day, month, year), but I'm not sure how! I have tried, but then I get errors such as ')' expected?
Any ideas! :D

f1d wrote:
I'm calling a method from another class to change the date (its a date object) in another class.
I keep getting the error 'setDate(int,int,int) in Date cannot be applied to ()'
My code is:
public int changeDate()
cycleDate.setDate();
}I'm guessing I need to pass 3 parameters (day, month, year), seems that way from the error you posted
but I'm not sure how!
setDate(16, 6, 2008);
I have tried, but then I get errors such as ')' expected?
Any ideas! :Dyou need to post your code if you're getting specific errors like that.
but typically ')' expected means just that, you have too many or not enough parenthesis (or in the wrong place, etc.)
i.e. syntax error

Web dynpro abap : Call an application from another with parameters

Hi ,
Could you please tell me how to call an application from another with parameters?
Thanks a lot
Karim

* Construct the URL
      call method cl_wd_utilities=>construct_wd_url
        exporting
        application_name              = 'APPLICATIION_NAME'
      importing
        out_absolute_url              = g_url.
* Append parameters to URL
data: g_par1 = lv_value. " value of your parameter
call method cl_http_server=>append_field_url
    exporting
      name = 'PAR1' " Parameter name
      value = g_par1
    changing
      url   = g_url.
* Call the Application
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window         TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window         = lo_window_manager->create_external_window(
                   url = g_url ).
lo_window->open( ).

How to call a method from another class

I have a problem were i have to call a method from another class. What is the command line that i have to use. Thanks.

Here's one I wipped up in 10 minutes... Cool!
package forums;
import javax.swing.JFrame;
import javax.swing.JTextArea;
import krc.utilz.io.Filez;
import java.io.FileNotFoundException;
class FileDisplayer extends JFrame
private static final long serialVersionUID = 0L;
FileDisplayer(String filename) {
    super(filename);
    this.setDefaultCloseOperation(EXIT_ON_CLOSE);
    this.setSize(600, 800);
    JTextArea text = new JTextArea();
    try {
      text.setText(Filez.read(filename));
    } catch (FileNotFoundException e) {
      text.setText(e.toString());
    this.add(text);
public static void main(String args[]) {
    final String filename = (args.length>0 ? args[0] : "C:/Java/home/src/forums/FileDisplayer.java");
    try {
      java.awt.EventQueue.invokeLater(
        new Runnable() {
          public void run() {
            new FileDisplayer(filename).setVisible(true);
    } catch (Exception e) {
      e.printStackTrace();
Filez.read
   * reads the given file into one big string
   * @param String filename - the name of the file to read
   * @return the contents filename
public static String read(String filename) throws FileNotFoundException {
    return Filez.read(new FileReader(filename));
   * Reads the contents of the given reader into one big string, and closes the reader.
   * @param java.io.Reader reader - a subclass of Reader to read from.
   * @return the whole contents of the given reader.
public static String read(Reader in) {
    try {
      StringBuffer out = new StringBuffer();
      try {
        char[] bfr = new char[BFRSIZE];
        int n = 0;
        while( (n=in.read(bfr,0,BFRSIZE)) > 0 ) {
          out.append(bfr,0,n);
      } finally {
        if(in!=null)in.close();
      return out.toString();
    } catch (IOException e) {
      throw new RuntimeIOException(e.getMessage(), e);
}Edited by: corlettk on Dec 16, 2007 1:01 PM - dang [code [/tags][

Emails, Call Logs and BlackBerry Messenger messages deleted

Almost exactly 2 years from the date I got my BlackBerry Curve 8300, my emails, call logs and BlackBerry Messenger messages keeps getting deleted without notice. The BlackBerry then stalls until I remove the battery and I log on again. Can anyone help me idetify the problem and how I can resolve this?
Solved!
Go to Solution.

HI and Welcome to the Forums!
Wow -- 2 years without an issue on a computing device! A record! Excellent! Here are some KB's that might be helpful:
KB14213 Call logs, SMS text messages, and email messages are deleted on the BlackBerry smartphone
KB14320 How to maximize free space and battery power on the BlackBerry smartphone
KB15345 How to qualify low memory situations on the BlackBerry smartphone
http://www.blackberryforums.com/general-blackberry-discussion/116396-managing-your-bb-memory-lost-ca...
http://www.blackberryforums.com/general-blackberry-discussion/112029-losing-call-logs-sms-emails-opt...
Hopefully something there will be useful.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to import tables, indexes, tablespace, etc from a DMP.

Hello,
I like to know how to import tables, indexes, tablespace, etc from an DMP export of a Oracle 10.2.0.1 to be apply on a Oracle 11.2.0. When I import the DMP file all the data is going to one single Tablespace, for example, Users tablespace.
On the original database we have various tablespace's each separated with different content (tables, indexes) and I like to know if it posible to import the same schema,tables, indexes, tablespace all made with one single DMP Export. I can't use DBUA because the software of the database on the 10.2 is missing, I have only a DMP file (24GB) of DMP!.
Thanks for the reply,
Sorry for my english :).
Regards.

thanks for that but is not what Im looking for.
Look, on my ORCL directory of the oracle 10.2 I have for example this:
CONTROL01.CTL
EXAMPLE01.DBF
REDO01-1.LOG
REDO01.LOG
REDO02-2.LOG
REDO02.LOG
REDO03-3.LOG
REDO03.LOG
RMAN.DBF
SYSAUX01.DBF
SYSTEM01.DBF
TEMP01.DBF
UNDOTBS01.DBF
USERS01.DBF
TABLESPACE1.ORA
TABLESPACE2.ORA
TABLESPACE3.ORA
TABLESPACE4.ORA
TABLESPACE5.ORA
I make a full export to a DMP. Then in my 11.2 version first I created the user then when import the DMP file none of the tablespace (TABLESPACE1, TABLESPACE2, ETC...) is created, all is going to the USERS tablespace, SO, im looking a way to tell imp command that generates the exactly tablespace structure that i was have on the 10.2.
Hope this can explain more my problem.
Thanks again!.

Importing emails, signatures and contacts from Entourage

I've been trying to find a way to import emails, signatures and contacts from Entourage to mail. I want to change accounts so I can eventually use mobileme in the office I'm working at but don't want to have to go through the arduous process of having to copy everything manually into mail.
Has anyone found a fool-proof way of doing this yet ?
Thanks & cheers, Jan

Just imported everything myself for Entourage X a few weeks ago.
iCal will directly import Entourage's calendar.
Address book can be done to ways. In Entourage, open Address book, under the file tab select export contacts. This will save a .txt file on the desktop which can be imported by mail. Another way is to create a folder on the desktop, then highlight and drag all Entourage contacts to the folder which can also be imported. Either way, if you have more than one email address per contact, you may have to cut and paste those manually.
Mail will import email from Entourage directly. I had to import several times to get everything. In Mail under the File Tab, just click import mailboxes and select Entourage. Another window will open and you are able to pick which Entourage folders to import. All are selected initially.
As far as signatures, you most likely will need to cut and paste those manually.

Calling a report from another report

Hi,
Is there any way ,(any built in ) to call a report from another report in Report Builder 2000 and Report Builder 6i.
Regards

Try to call report from report by a button in the calling report:
1     In the Layout Model view, click in the tool palette. Note
2     Click and drag a rectangle.
3     Double-click the button object to display the Property Palette.
4     Under the Button Label node, set the Label Type property to either Text or Icon:
n     If the button label is text, set the Text property to the text you want to appear on the button.
n     If the button label is an icon, set the Icon Name property to the name of the file containing the icon (the file must reside in the directory specified by the UI_ICON environment variable).
5     Under the Button Behavior node, set the Type property to PL/SQL.
6     Double-click the PL/SQL Trigger property value field.
7     In the PL/SQL Editor, define the PL/SQL for the action trigger or format trigger when the button is clicked in the formatted report.
8     Set other properties as desired.
9     To activate the button, run the report, then display it in the Runtime Previewer.

Calling a Report from another Report.....URGENT

Hi,
I am calling a report from another report using hyperlink. I want that this new report should come in a new page.
Can any body help me where i can set this property, so that the new report will open in a new page.
Thanks in advance
Regards
Kamal

Try to call report from report by a button in the calling report:
1     In the Layout Model view, click in the tool palette. Note
2     Click and drag a rectangle.
3     Double-click the button object to display the Property Palette.
4     Under the Button Label node, set the Label Type property to either Text or Icon:
n     If the button label is text, set the Text property to the text you want to appear on the button.
n     If the button label is an icon, set the Icon Name property to the name of the file containing the icon (the file must reside in the directory specified by the UI_ICON environment variable).
5     Under the Button Behavior node, set the Type property to PL/SQL.
6     Double-click the PL/SQL Trigger property value field.
7     In the PL/SQL Editor, define the PL/SQL for the action trigger or format trigger when the button is clicked in the formatted report.
8     Set other properties as desired.
9     To activate the button, run the report, then display it in the Runtime Previewer.

Problem regarding calling a program from another program

Hi,
I have a requirement that i need to call a program from another program and in that case the called program should be executed with a value in the selection screen coming from the first program..i.e.
a standard report to view the user Notes for annual leave is RPTARQDBVIEW. Can we create a report to display all the users under a manager as a hyperlink and run the report(RPTARQDBVIEW), with the pernr of the employee selected
Regards,
saumik

Submitting a report using ranges for select-options
* Define range for ltak-tanum
RANGES: r_tanum FOR ltak-tanum.
* Read values from database tabel into the range
* These values are later used for select-options in the report
SELECT * FROM ltak
WHERE lgnum = w_lgnum AND           "Warehouse number/complex
        vbeln = w_screen1000-io_vbeln.      "Transfer order number
MOVE ltak-tanum TO r_tanum-low.
MOVE 'I' TO r_tanum-sign.
MOVE 'EQ' TO r_tanum-option.
APPEND r_tanum.
ENDSELECT.
* Submit report with range
SUBMIT zmm00100 WITH p_tanum IN r_tanum.
or
Submitting a report from ABAP with selection criterias
TYPES: tt_selection TYPE STANDARD TABLE OF rsparams.
DATA: l_iblnr        TYPE st_iblnr,
*     Define internal table and work area for select-options
        l_selection    TYPE rsparams,
        li_selection   TYPE tt_selection.
* Create selectIon table
LOOP AT gi_iblnr INTO l_iblnr.
    CLEAR l_selection.
    l_selection-selname = 'IM_IBLNR'.    "Option name
    l_selection-kind     = 'S'.           "S= select options P=Parameters
    l_selection-sign     = 'I'.           "Sign
    l_selection-option   = 'EQ'.          "Option
    l_selection-low      = l_iblnr-iblnr. "Value
    APPEND l_selection TO li_selection.
ENDLOOP.
* Submit report
SUBMIT rm07idif WITH SELECTION-TABLE li_selection AND RETURN.
Regards,
Prabhudas

Calling a method from another file

This is pretty basic stuff but i can't seem to get it right. I am calling a method from another file. The other file IS located in the same folder BUT when i compile i get errors
"cannot find symbol" <===referring to limit and sieve i believe.
The method name is "sieve" the file name is "PrimeSieve2008" and "limit" is the variable in brackets in the real method.
     public static void main (String [] args) {
final int [] PRIMES;
int sieve = PrimeSieve2008.sieve(limit);
     PRIMES = sieve(getValidInt());
          for (int j = 0; j<PRIMES.length; j++) {
               System.out.println("Prime[" + j + "] = " + PRIMES[j]);
Is "int sieve = PrimeSieve2008.sieve(limit)" the wrong way to call a file?
Thanks a million,
Alex
Edited by: Simplistic2099 on Apr 3, 2008 7:47 PM
Edited by: Simplistic2099 on Apr 3, 2008 7:49 PM

Simplistic2099 wrote:
the other method runs fine:
"public static int[] sieve(final int limit){
int candidate; // possible prime
int count; // no. of primes found
boolean[] mayBePrime = new boolean[limit+1];
// remaining possibilities
final int[] PRIMES; // array to return
// initialize mayBePrime
for ( int j = 0 ; j <= limit ; j++ ) {
mayBePrime[j] = true;
mayBePrime[0] = mayBePrime[1] = false;
// apply sieve, and count primes
candidate = 2;
count = 0;
while ( candidate <= limit ) {
if ( mayBePrime[candidate] ) {
count++;
for ( int j = 2 * candidate ; j <= limit ; j += candidate ) {
mayBePrime[j] = false;
} // end for
} // end if
candidate++;
} // end while
// fill up new array with the primes found
PRIMES = new int[count];
count = 0;
for (int j = 2 ; j <= limit ; j++ ) {
if ( mayBePrime[j] ) {
PRIMES[count] = j;
count++;
} // end if
} // for
return PRIMES;
} // sieve
I really am clueless here.in this one you are passing in limit.
in the other one you are getting limit from somewhere outside of main.

Help on Calling a method from another class

how can i call a method from another class.
Class A has 3 methods
i just want to call only one of these 3 methods into my another class.
How can I do that.

When i am trying this
A a=new A;
Its calling all the methods from class A. I just want
to call a specfic method.How can it be done?When i am trying this
A a=new A();
Its calling all the methods from class A. I just want to call a specfic method.How can it be done?

Import emails, call logs, etc from another BB

Similar Messages

Maybe you are looking for