Import emails from another server to iCoud

Hello. I would like to read my email from an email account I have created with my domain name on an hosting server company into my iCloud/Mail on my Mac. Is it possible? Thank you for your help.

You can drag mail from any account to any other in the Mail application on your Mac.

Similar Messages

  • Import app from another server

    Recieving an error when trying to import application that was developed on another server.
    The error message is:
    "ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 3: PLS-00201: identifier 'P_ID' must be declared ORA-06550: line 14, column 1: PL/SQL: Statement ignored <pre>begin wwv_flow_api.create_page_branch( p_id=&gt;2434179818019486112 + wwv_flow_api.g_id_offset, p_flow_id=&gt; wwv_flow.g_flow_id, p_flow_step_id=&gt; 1, p_branch_action=&gt; '2', p_branch_point=&gt; 'AFTER_PROCESSING', p_branch_type=&gt; 'BRAN"

    Hi again scott.
    well, we just tried and changed it to:
    wwv_flow_api.create_page_branch(
    p_id=>2434179818019486112 + wwv_flow_api.g_id_offset,
    p_flow_id=> wwv_flow.g_flow_id,
    p_flow_step_id=> 1,
    p_branch_action=> '2',
    p_branch_point=> 'AFTER_PROCESSING',
    p_branch_type=> 'BRANCH_TO_STEP',
    p_branch_when_button_id=>2257454128020560151+ wwv_flow_api.g_id_offset,
    p_branch_sequence=> 10,
    p_branch_comment=> 'Created by Noone');
    and i receive the same error, i think:
    ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 3: PLS-00201: identifier 'P_ID' must be declared ORA-06550: line 14, column 1: PL/SQL: Statement ignored <pre>begin wwv_flow_api.create_page_branch( p_id=&gt;2434179818019486112 + wwv_flow_api.g_id_offset, p_flow_id=&gt; wwv_flow.g_flow_id, p_flow_step_id=&gt; 1, p_branch_action=&gt; '2', p_branch_point=&gt; 'AFTER_PROCESSING', p_branch_type=&g
    so guess its not the problem then...

  • How do I import email messages from another server?

    Heya,
    So I can't figure out how to import mail messages from another server into this one? I had [email protected] pointing to the old one, when I repointed it obviously all my email "disappeared" because there is none on the new server. So how do I move it from the old server to the new one? Usually I'd just drag and drop the email message files over FTP but SLS doesn't seem to give me permission to do that on this one.
    Thanks!

    Search for discussions of the imapsync tool.

  • HT6030 Mac Mail 7.1 has stopped importing my POP emails from the Server

    I have suddenly realised (over the past 2 weeks) that Mail has stopped importing my POP emails from the Server, at first I thought it was just that no-one was sendfing me any, however, I created an Account with Thunderbird and suddenly received dozens of them. I've tried many of the "googled" fixes but none seem to work for me....
    Can anyone help me to get my Apple Mail performing correctly please.

    Do a backup.
    Take notes of all account information or take screen shots. You may need to set the accounts up again. Quit Mail.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Containers/com.apple.mail. Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
    Re-launch Mail and test. If the problem is solved, recreate any required Mail settings and import any emails you want to save from the folder on the desktop. You can then put the folder in the Trash. If the problem remains, return the folder to where you got it replacing the one that is there. 
    Information learned from Linc Davis. leonie also supplied some information.

  • Accept Mail from another server

    We are testing a migration scenario and are running into a few issues. I have our new mail server setup with the same domain as our old. We will slowly be migrating from the old to the new, sort of like a split domain. The old server is running GroupWise 7, the new is Zimbra based.
    What I am attempting to do is allow for users on Zimbra (using the same domain) to be able to send messages to users on Groupwise. So far I have been unable to find a setting in GWIA that allows me to say it is "ok" to accept email from this server. I believe that since both the Zimbra and GW servers are using the example.com domain GW is not allowing messages to go to mailboxes.
    How do I setup Groupwise to allow messages from another server using the same domain?

    I doubt that is it. Your GW system is set to receive messages for
    @example.com and shouldn't care where they have come from. Your Zimbra
    server should be set to forward to GW as a smarthost and have it forward
    undeliverables to that host.
    Usually, the Zimbra side is going to have problems, especially if it has all
    of the addresses configured on it. It knows that it handles email for
    example.com and will try to deliver it to itself, unless you do something
    with undeliverables instead.
    I think.......................
    "dabrown ksu" <[email protected]> wrote in message
    news:[email protected]..
    >
    > We are testing a migration scenario and are running into a few issues. I
    > have our new mail server setup with the same domain as our old. We will
    > slowly be migrating from the old to the new, sort of like a split
    > domain. The old server is running GroupWise 7, the new is Zimbra based.
    >
    > What I am attempting to do is allow for users on Zimbra (using the same
    > domain) to be able to send messages to users on Groupwise. So far I have
    > been unable to find a setting in GWIA that allows me to say it is "ok"
    > to accept email from this server. I believe that since both the Zimbra
    > and GW servers are using the example.com domain GW is not allowing
    > messages to go to mailboxes.
    >
    > How do I setup Groupwise to allow messages from another server using
    > the same domain?
    >
    >
    > --
    > dabrown_ksu
    > ------------------------------------------------------------------------
    > dabrown_ksu's Profile: http://forums.novell.com/member.php?userid=90079
    > View this thread: http://forums.novell.com/showthread.php?t=415905
    >

  • Anyone having trouble conisistenly downloading email from comcast server with IOS 5?

    My Iphone 4 with IOS 5 just started having issues downloading email from comcast server consistently. It is working, but there is SOMETIMES a delay in download and then it works perfectly other times.  Sometimes it tries to download the same 200 emails over and over. Anyone have any ideas? I have already deleted and re-added my email account, reset phone and still not working properly.  Apple genius bar thinks it is a comcast issue IOS 5.

    Hello David,
    Please follow the steps provided here to properly configure your iPhone.  This is a quide from another user.  I you follow this exactly, the Comcast e-mail account will verify properly, and you will be able to send and receive all of your e-mail without having to create a Gmail account, as previously discussed.  You can ignore their comment.
    Thank you.
    Best Regards,
    -- Morris
    Hyperlink:  http://forums.comcast.com/t5/E-Mail-and-Xfinity-Connect-Help/Can-t-configure-Com cast-email-on-iPhone-iOS-5/td-p/1099031

  • Hi, i am trying to open and view a report that comes from another server with different odbc connection

    hi, i am trying to open and view a report that comes from another server with different odbc connection
    i created a crystal report for a mysql database on my machine and everything works great
    but we have other reports that come from other machines with different odbc connection
    and this its not working when opens the report asks for credentials
    and i cannot use the remote ip for these reports that come from other machine
    question
    if i cannot connect to remote ip to open the report
    for each report i have to create a database the report database on my machine and then open the report ?
    or there is some other way to open the report ?
    i am using visual studio 2013 and mysql and
       <add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
    thanks

    short
    i have a report that it was created on another server with a specific dsn
    now i am trying to open the report on my machine
    the database from the other server does not exist on my machine
    the server machine where the report was created the ip its not accessible
    question ?
    can i open the report on my machine or its impossible ?
    thanks

  • How can i import contacts from another AIM account to this new one

    If you reference my last ichat question, you will see that I have had serious problems and had to create a new account.
    How can I import contacts from another AIM account to this new one??

    Hi,
    Use AIM for Mac and use the Export and Import features.
    Other than that it is a question on making sure every Single Buddy has more than just their Screen name in the IChat Address Card so it is added to the Address Book and dragging them back from there
    9:08 PM Thursday; February 7, 2008

  • No longer receive emails from iCloud server

    Since I transferred to iCloud from MobileMe, it seems that I no longer receive any emails from the server in my Outlook mailbox. I tried to add an new email account to Outlook but it kept saying "An encrypted connection to your mail server is not available". So I tried to search an unencrypted connection by clicking NEXT. The system then asked me to verify my me.com account details. I've tried many many times but no joy. Can anyone tell me how to fix it? Many thanks, C

    As mentioned, there is a critical MS patch that came out yesterday that they SHOULD install, but this has nothing to do with your iPhone.
    Does the phone get email when you manually launch the mail app, and it's only the notifications that are not happening, or can you not get mail at all?
    If it's only missing notifications you should first reboot the phone (hold HOME and SLEEP for about 10 seconds, until the Apple logo appears. Ignore the "Slide to Power Off" message and keep holding).
    If this doesn't fix notifications ask your IT guys what the KeepAlive timer is set to; it should be 59 minutes. This is NOT the default.
    Finally, it could be an AT&T network problem. Try turning off WiFi and see if you can access the Internet over AT&T.
    If you are not getting emails even when you launch the mail app you have a different problem. Then check if you can get mail via Safari and OWA.

  • Delete email from Telus server

    I have an iPhone 3GS and I use a telus.net account. I have my phone set to delete the email from the server if deleted from the inbox but this is not happening.
    Thank you

    hi..anyone has solutions to this? i tried all methods but it does not delete from server

  • Unable to send email from content server

    Hi,
    I have a requirement of sending the notification email to user from the stellent when he subscribe to it.To test it i logged in to content server as sysadmin.
    Administration->Actions->Send test email.
    I had filled some dummy data and when i click on send it gives me a error
    Content Server Request Failed
    Unable to send email. Could not send mail message from [email protected] with subject line: Test email from Content Server.
    intradoc.common.ServiceException: !csMailCouldNotSend,[email protected],Test email from Content Server
         at intradoc.server.InternetFunctions.sendMailToEx(Unknown Source)
         at intradoc.server.SystemAuditHandler.sendEmail(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at intradoc.common.IdcMethodHolder.invokeMethod(Unknown Source)
         at intradoc.common.ClassHelperUtils.executeMethodReportStatus(Unknown Source)
         at intradoc.server.ServiceHandler.executeAction(Unknown Source)
         at intradoc.server.Service.doCodeEx(Unknown Source)
         at intradoc.server.Service.doCode(Unknown Source)
         at intradoc.server.ServiceRequestImplementor.doAction(Unknown Source)
         at intradoc.server.Service.doAction(Unknown Source)
         at intradoc.server.ServiceRequestImplementor.doActions(Unknown Source)
         at intradoc.server.Service.doActions(Unknown Source)
         at intradoc.server.ServiceRequestImplementor.executeActions(Unknown Source)
         at intradoc.server.Service.executeActions(Unknown Source)
         at intradoc.server.ServiceRequestImplementor.doRequest(Unknown Source)
         at intradoc.server.Service.doRequest(Unknown Source)
         at intradoc.server.ServiceManager.processCommand(Unknown Source)
         at intradoc.server.IdcServerThread.run(Unknown Source)
    Caused by: intradoc.common.ServiceException:
         at intradoc.common.SmtpClient.sendMail(Unknown Source)
         at intradoc.server.InternetFunctions.sendMail(Unknown Source)
         ... 21 more
    Caused by: java.lang.Exception: !csSMTPInvalidMessage,"System Administrator" <[email protected]>!csSMTPUnableToFindRecipients,1
         at intradoc.common.SmtpClient.writeMultiMsg(Unknown Source)
         ... 23 more
    Caused by: java.lang.Exception: !csSMTPResponseIndicatesFailure,550 5.7.1 Unable to relay for [email protected]
         at intradoc.common.SmtpClient.writeMsg(Unknown Source)
         ... 24 more
    I had set the internet configration in admin server to this values..
    HttpServerAddress=blrdxp-rchithul.corp.capgemini.com
    MailServer=BLREX002.corp.capgemini.com
    [email protected]
    SmtpPort=25
    HttpRelativeWebRoot=/idc/
    CgiFileName=idcplg
    UseSSL=No
    WebProxyAdminServer=true
    But i am still getting the error.kindly help me...
    Thanks in Advance
    Regards
    Rakesh

    Hi Rakesh,
    You have to request you Network team to add the ip address of the machine where you have installed content server to your Exchange Server.
    Let me know if it works.
    Deepak

  • Problem in accessing the media files from another server

    Currently I am working in a project with streaming video on demand and using FMS 4.5.
    Let’s say the FMS is installed on one machine say ‘121.123.35.34’ and there is another server ‘100.54.88.222’ where all the media files belong. Now we need to point to this third server to play videos from FMS.I have done the below changes:
    In the fms.ini file: set the VOD_DIR2 = \\100.54.88.222\myvideos
    In the application.xml: Added the stream: <Streams>/hr;${VOD_DIR2}</Streams>
    From my application accessing the path of flv as:source= “rtmp:// 121.123.35.34:1935/vod/hr/test” . Not able to access the video.
    Note: If I will point to say ‘C:hrvideos’ in VOD_DIR2, then I am able to access the videos using the same URL.
    I also tried mapping the shared path to the FMS machine and then given the mapped drive path in the VOD_DIR2, but this also doesn’t work.
    Please let me know:
    If we need to configure any other parameter to stream videos from another server.
    VOD_COMMON_DIR: I modified this similar TO VOD_DIR to location 'C:hrvideos', I am able to stream the videos using rtmp, but not abl eto stream with http.
              Please let me know  can we stream using http also as we need this to run f4m manifest file.
              http://121.123.35.34:8134/vod/hr/sample.mp4.
              http://121.123.35.34:8134/vod/hr/sample.f4m
    Thanks,
    Anjali

    Hi Shiven,
    I followed the steps suggested by you:
    1) Changed the stream:
    <Streams>/hr;${VOD_DIR2}</Streams> to<Streams>/;${VOD_DIR2}</Streams>
    But not able to access the video with rtmp:// 121.123.35.34:1935/vod/test
    2) For http streaming, changes the HttpStreamingContentPath in hds-vod in the httpd config file, and tried to stream the video like:
    http:// 121.123.35.34:8134/vod/test.mp4 or
    http:// 121.123.35.34:8134/hds-vod/test.mp4
    But not able to load the video.
    Please suggest?
    Thanks & Regards,
    Anjali Rawat

  • On my ipad mini, when I delete an email from the inbox (and it goes into Trash), it immediately deletes that email from the server (ATT/Yahoo).  I've called support for both ATT and Apple and can't find a way to have the emails remain on the server.

    On my iPad Mini, when I delete an email from the inbox (and it goes into Trash), it immediately deletes that email from the server (ATT/Yahoo).  I've called support for both ATT and Apple and can't find a way to have the emails remain on the server. 
    My husband and I share an email address and if he misses a day checking email on his notebook, he doesn't receive the items that I have sent to Trash on my iPad Mini.
    Appreciate suggestions.
    [The curious thing is, if I "move" the deleted emails from Trash on my iPad Mini into the Inbox, I can go to my notebook, open my online email and they are back in my ATT/Yahoo Inbox.]

    Is your Yahoo account set up as POP3 or IMAP?

  • Authentication Error while Sending Email from SMTP server.

    Authentication Error while Sending Email from SMTP server.  Can receive emails but cannot send emails from this account. 

    no email account was setup on the phone unless it was issued by your company.
    gmail is required but no server address ports to enter.
    my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
    i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
    i doubt if it's a verizon issue.

  • How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

    I had an interview question that is:
    How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
    Set up steps so inset, update or delete operation takes place across the servers.
    It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
    Also please describe would it be different for SQL Server 2012?
    If so, then what are the steps?

    I had an interview question that is:
    How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
    Set up steps so that inset, update or delete operation gets done correctly across servers.
    I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
    Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

Maybe you are looking for

  • JFileChooser - after slecting save -- the JFC reappers

    Hello, I having a problem with JFileChooser. After inputing the filename in which to be saved and slecting the save button - JFileChooser re-appears! Does anyone know why? I just want the JFileChooser to dissapear after I select Save. i'm using j2sdk

  • Cant query view but have table privileges (not found in ALL_VIEWS)

    Hi guys, I have a strange (to me~) problem where I have a view querying 4 tables. the creator and another user can call the view but a third user cannot. If I query ALL_OBJECTS or ALL_VIEWS with this user the view is not listed. However, the user has

  • Simple Question: new() from Generic

    I have a simple Class: public class Test<T>   public void test()     T obj = new T(); //error }I get the error: found : type parameter T required: class Suppose this isn't possible in java? Thanks!

  • Exporting exact size image file

    CS3/4 Can anyone tell me now to go about setting things up so that if I export my work to an image format like *.psd... I can predetermine the exact size the image will be? I've groped around in the help file but this kind of thing is hard to nail do

  • Multiple webcam

    Hello, Could anyone help me, please. I have download Labview Webcam Library from Pete's homepage and I have problem in capture image from multiple webcams. I have 4 webcams , All of my webcams use WDM Driver so when i capture image from my webcams, I