Import error: First track of disc

**Sorry if this has already been asked/answered! but I couldn't find it...**
When I import a CD the first track has a pause in it at about the 5 sec. mark. It will pause for 1/2 - 1 sec. and resume playing... this is quite anoying!
Can this be fixed??? HELP!!!
BTW I have tried 4 different CD/DVD drives, same problem. If I rip using Win Media Player or MusicMatch no problems... (but I don't like them!)
One of a kind Windows XP Pro MCE 2005

Id say the simple thing to do is use WMP to rip it, since it does not add the annoying pause, and then add/import what it rips to iTunes by playing it with iTunes or going to file and selecting "Add File To Library"

Similar Messages

Import Only First Track

I tried importing a CD as MP3 yesterday, and only the first track was actually imported -- the rest of the tracks appeared in the list of files created, but each was 2K in size, with no content.
When I went to another computer and did the same, it worked fine. Both machines are using Vista ... I am a bit surprised, and would like to know if there is any specific setting that might cause this, or if perhaps there is something that someone knows about that is an issue ... it would be frustrating to have to use the other machine when I will be using the MP3s on the other ...

Your notebook PC probably has different hardware & different drivers. You can mess around trying to fix it, or as Vixen suggested, just rip your CDs using WMP as MP3 files and add them to the itunes library.
If you want AAC or AIFF files, you'll have to figure out itunes & the drivers.
http://support.apple.com/kb/HT1768

First track does not import BUT no error messages

This problem only appears to be happening when I import songs from cds burned by friends.
iTunes appears to be importing Track One along with all the following tracks but when I look up the album in my Library, Track One is missing.
It does this about 90% of the time and it never indicates there's been an error.
In cases where there is just one track, it goes through all the appearances of importing it normally and the track never appears in my Library.
What's up with that?

Addendum to all about this question - I am trying to import my original CDs - hangs and does nothing at first track. Trashed the .plist, no help. Reinstalled fresh copy of iTunes - helped - FOR ONE DISK. After that, same problem.

Itunes stops working as soon as it reads first track while importing CD (APPCRASH). Need help!

Itunes stopped working error comes up as soon as it reads first track while importing CD and needs to close program (APPCRASH). I have uninstalled and reinstalled iTunes several times - also ran CD diagnostics in iTunes and looks OK. I'm on Vista Home Premium Edition. If it will help I saved the CD Diagnostics from ITunes and the Windows APPCRASH info. I've spend several hours trying to figure this out. Any ideas?

Problem solved! I had my pc plugged into a port replicator to use a bigger screen, etc. When I unplugged it and tried to import the CDs it worked fine. Not sure why I got the error but whenever I get unexpected errors in the future, I will take it off the replicator to eliminate that possibility. Thanks to all who reviewed.

Importing Troubles: Incomplete First Tracks

When I try to import a CD, the first track invariably winds up... how should I say... abbreviated. It will start importing, get a little ways into the first track, get stuck there for a while, then skip to track 2. The rest of the CD imports just fine, but I only get about 30 seconds or so of the first track. I'm running XP on a new Mtech laptop. I've updated all my hardware drivers. I've uninstalled and reinstalled iTunes. I don't get any error messages or funky track times or anything else that other people have reported. Just an incomplete first track. Anyone have any suggestions?

Thanks for the info. I did try just re-importing the incomplete tracks, and it worked the first couple of times, but then iTunes started merely re-importing the same partial track length it had the first time around. But good news: the issue has been resolved without having to resort to using a separate program for ripping, converting .WAV files, etc - none of which I was keen on doing.
For anyone else who might be having this problem, what seemed to fix it was this: I turned Error Correction on, and I turned the automatic import feature off. BUT... just doing this alone wasn't enough. After making these adjustments, I completely closed out of iTunes and then rebooted my computer. I opened up iTunes after the reboot and have been happily importing CDs problem-free ever since.

First track when importing - silent 'beat' 5 secs in

Hi, I've always had this problem and its beginning to drive me crazy
When I import songs from a cd onto itunes, about 5 seconds in on the first track there is always a silent beat. It doesnt sound like skipping as such, just as if someone has turned the volume off for a split second.
The thing is, my computer also broke last week and I needed a new hard drive. It is still happening with the new hard drive!!
I have the latest version of itunes and I dont have the problem when uploading music into, say, windows media player, and so I cant figure out where the problem is.
Anyone got any idea?!

please!

ITunes 10 will only play the first track of a CD, including brand new CDs.

I reinstalled my operating system and had to reinstall iTunes. Now I have version 10 and after I import a CD it will only play the first track then progressively go track by track skipping through the rest without playing. Does it even whether I try to play from the CD or from the music section I imported it to. Even have 3 brand new CDs that it is doign the same thing to, so I have a hard time believing it is a disc reading issue.

Microsoft Windows Vista Ultimate Edition Service Pack 1 (Build 6001)
Dell Inc. Inspiron 531s
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 00D2AD08030F0338
Current user is an administrator.
The current local date and time is 2011-07-10 13:45:32.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., Radeon X1300 Series (Microsoft Corporation - WDDM)
ATI Technologies Inc., Radeon X1300 Series Sec. (Microsoft Corporation - WDDM)
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.3.1.55 is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: HL-DT-ST DVD+-RW GSA-H31N, Rev B109
Drive is empty.

Why does the first track on an album appear after the other tracks?

When I downloaded iTunes and did an initial media scan, it added all my music files. However, on some of the albums added, not all, the first track is listed after the other tracks. For instance, the track list goes from 2-13 and then 1. This is only happening on some of my multi-disc albums, again not all, and not on the single disc albums. One of the tracks on Disc 2 actually appears on Disc 2 but has Disc 1 written above it. I am running the latest version of iTunes on Windows 7 Home Premium edition, and everything else seems to work fine. This is what I've tried on my own so far, all without success;
1.) I've checked the track 1 properties using "get info" and compared them to other tracks. They seem fine.
2.) I've deleted the track 1 songs and re-added them, but they return the same way.
3.) I've deleted the entire albums and re-added them, but the problem remains.
Does anyone have any ideas about what's causing this bit of weirdness?

I had this problem too, and for a long time it aggravated me. I found that you just have to keep importing the cd, again and again, until it sounds ok. Select only the tracks that are fuzzy to speed things up. Hope this helps.

IPod Touch skips (jumps to the end of) the first track. Bug?

Hello,
I'm experiencing the following problem with my iPod Touch and was unable to find any information about similar cases in different forums:
I have several Audible.de audiobooks on my iPod that are by default listed under "audiobooks". Recently I noticed that sometimes my Touch would jump over the first track of a music album when I would start playing the first song, directly jumping to the end of the track and starting to play the second (while the status dot stays at the end of track 1 for a while). It looks as if I had fast forwarded to the very end of the first track - and it happens with the first track only.
I've removed all the music and books from my Touch and moved it back using iTunes, but this didn't help for long. If I completely turn off the Touch and turn it back on, the problem is solved for a moment. I kept asking myself why the problem would reoccur and it seems to me that it has to do with the audiobooks I'm listening to often. I tried the following:
1. Switched off and on. Listened to music without any title jumping problem.
2. Opened an audiobook and listened to it for a few seconds.
3. Went back to music (any album) - the Touch jumps over the first track.
This leads me to believe that listening to audiobooks (maybe just audible audiobooks) creates this problem.
I also found out that after starting to play the first track (which gets immediately jumped over or, more exactly, to its very end), I can "heal" the Touch (until I listen to an audiobook again) by pressing Pause, then the back arrow twice so that I jump to the beginning of the first track, then back to the album cover and track list. After that, I can listen to music as long as I want to without any skipping or jumping, as long as I don't play an audiobook.
To me, this sounds like a bug, but I can't tell if Audible or Apple is to blame. Besides, I don't see an easy way to contact Apple about a bug that might be related to their OS, which I find upsetting (they hide their contact adresses so well that you can't tell them about bugs in their own software, or you have to pay for expensive calls?).
Maybe someone knows what to do or has already heard about a similar problem. I try to circumvent a complete reset of my iPod, as I have lots of apps that are arranged into many different groups. I'd prefer not to sort all of them again, but if resetting the iPod seems to be the only possible solution, I would try that of course. Of course I'd appreciate if someone could tell me how to fix this or whom to contact about it.
Thanks (also for reading this long description),
Alex
Message was edited by: alexhager

Hi MikeSpike,
Thanks for your comment! Have you tried everything to resolve it, like resetting the iPod as a new device after deleting the IPSW from your computer first? Does the error still occur?
In fact, I cannot reproduce the problem using podcasts (they work fine for me, as far as I can tell there's no effect between podcast and music on my device), but it may very well be that the error is the same or a similar one (this would be for Apple to investigate, I'll forward parts of your comment to the Apple Advisor taking care of my case, if you agree).
Yes, it is the first track. Although I had one rare occasion where only track 2 was skipped and another one where tracks it happened to tracks 1 and 2 (no shuffle, no remember position activated), the highly reproducible issue touches track # 1 only.
Thanks for precising that you're using a BT headset. Could you please tell me which one, in case that matters? Has your iPod sometimes reacted weirdly when you used your BT headset to remote control the iPod, for instance skipping more titles than you wanted when you pressed "forward"? This is kind of what happened to me on my iPad and since then I've noticed the error appear on the iPad too.
Regarding your other issues, I cannot confirm the podcast problem where a podcast starts at some random point. Podcast seem to work fine in my case, but maybe all of this is caused by one and the same error. Let's hope Apple will find it all and fix it in an update asap.
Also, I don't have the artwork problem where an album displays artwork from a different album. I have had a case where a few tracks of one specific album (and just that one) were not displaying the artwork at all, although everything was properly tagged using the software MP3Tag. If you haven't reset your iPod (as a new device, not from the backup), maybe this would at least resolve some of your problems?
While my problem is just annoying for people like me who simply want their new device to work without any errors (even if there's an easy temporary fix or workaround to these errors so that I could live with it), your errors sum up to a nuisance that makes it hard to enjoy using the device. Having wrong artwork displayed with albums (or none at all) and podcasts being played at random positions is certainly not what you'd expect from such an expensive device.
Have you thought of contacting Apple about it? Not only might they have a solution for your specific problems, but it might also be more convincing if more people would independently report the first-track-skipping-issue we're all experiencing! What they need to know is that the bug is global, not just a corner case, and that it seems to be somehow related to their iOS. They couldn't afford ignoring it if several people would complain about this, especially now that a new iOS beta is already out!
Maybe some other users who read this thread have made similar experiences without paying attention to it? To all other forum users: would you please try if you notice anything weird like first tracks being skipped, either music or podcast? Maybe related to audiobook listening, maybe related to BT headset use? I'd be happy to forward any observation to Apple (to the existing issue case number) in order to better convince Apple to investigate this - asap.
Thanks again, MikeSpike, of course I will keep you all updated if I hear back from Apple!

Error message when burning discs on a MacBook and MacPro Desktop

I have encountered a problem burning a CD-R with the MacBook. I created 12 image files (JPEG) totaling 48 MB. I placed them in a Burn Folder and tried to burn them to a CD-R. I recevied the following error message "Burning the disc failed because an unexpected error occurred (error Code 0x80020000). The same problem occurred on my MacPro desktop. I spoke with an Apple technician. She had me reset the hardware on my desktop. When that did not work she told me the disk was bad. I tried a different brand of CD-R and a DVD disk with the same results. She suggested that I reinstall the operating system. Since it happened on both of my Apple computers it seems to me that the problem is related to a software bug, since it is unlikely that both machines went bad at the same time. The MacBook is only 3 months old and the MacPro desktop a little over a year old. Today I discovered that the desktop would burn a CD-R if I had only one image file in the Burn folder. Has anyone run into this problem? Does anyone have a solution?

Thank you for your reply. I have some additional information that may help you. I initially found that if I tried to burn 12 JPEG image files to a CD-R I received the error message I reported in my first post. If, however, I only tried to burn 3 files to the CD-R, they were burned onto the CD and I was able to retrieve them. If I tried to burn more than 3 files it did not work.
I took my MacBook to the Apple store Genius counter yesterday to get some help and was able to exactly reproduce the errors. The Apple techs suggested replacing the CD/DVD drive. I am waiting for the new drive to arrive. In the mean time, I discovered that if I included any number of files and sub-folders in a single main folder, and then tried to burn that main folder it worked. I was subsequently able to successfully burn a single folder containing 300MB of files and sub-folders. This seems to me to be a bug in the Mac OS, especially since it happened in exactly the same way on 2 different late model Macs. Hope this helps. Let me know if you can reproduce my experience or have any additiona information.

"Template import error: No VM configure file found" on brand new setup

Previously, I posted Console does not launch OVM 3.1.1, Win7x32 Firefox15/IE8 - Empty .jnlp file which was about VM Console not launching. Since this is a new installation, and it seemed to be a unique problem, I scratched the whole installation and started again from scratch. Everything, including the NFS file server, was re-installed from scratch CD OS installation.
The process is pretty straightforward once you're used to it, and in less than three hours I was ready again to import my first template (a template I had imported before). But now, I submit the the request, and almost immediately the process aborts. (You can see in the information below, that 1 second passes between the Import request (06:32:36) and the failure.)
Thing is, it takes about three minutes, even locally on the web server, to get an index of that large file (tar tzf), and at completion, the vm config file is listed.
Am I misreading the error? My web searches for enlightenment found only one good hit on this error, and in that case it appeared to be an "out of space" issue. In this case, though, I'm importing a 5GB tarfile into a 390GB, otherwise-empty file system, so I don't think that is the issue. The failure in ovs-agent.log is below. What other information may I provide to get to the bottom of this? (Thanks for any guidance/help, of course!)
[2012-10-31 06:31:40 3341] DEBUG (monitor:36) Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3341] INFO (notification:67) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3338] INFO (notification:193) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:48 4914] DEBUG (service:77) discover_cluster: ()
[2012-10-31 06:31:48 4914] DEBUG (service:85) discover_cluster: call completed.
[2012-10-31 06:32:03 4926] DEBUG (service:77) storage_plugin_mount: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, {'status': '', 'uuid': 'fc3564eb-ce8b-489c-96bc-df6de2cc8a11', 'ss_uuid': '0004fb00000900003cf41964f3476788', 'size': '330279518208', 'free_sz': '330075340800', 'state': 2, 'access_grp_names': [], 'access_path': 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', 'name': 'nfs:/mnt/ps_big/repo/repo'}, '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55', None, True, [])
[2012-10-31 06:32:03 4926] INFO (storageplugin:108) storage_plugin_mount(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:03 4926] DEBUG (NFSPlugin:353) cmd = ['mount', '-t', 'nfs', 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55']
[2012-10-31 06:32:03 4926] DEBUG (service:85) storage_plugin_mount: call completed.
[2012-10-31 06:32:03 4931] DEBUG (service:77) add_repository: ('filesrv.ps.***.com:/mnt/ps_big/repo/repo', '0004fb0000030000659e0ce6f2ecfb55')
[2012-10-31 06:32:03 4931] DEBUG (service:85) add_repository: call completed.
[2012-10-31 06:32:36 4972] DEBUG (linux:847) async call function: import_template
[2012-10-31 06:32:36 4975] DEBUG (service:77) import_template: ('0004fb0000030000659e0ce6f2ecfb55', '0004fb0000140000fdc18a572a244015', ['http://aspire/pstop/OVM_EL5U7_X86_64_TOOLS8_52_06_PVM.tgz'])
[2012-10-31 06:32:37 4975] INFO (notification:74) async_proc_prog: notification {ASYNC_PROC} progress PID 4975 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 0L, 'CURRENT_BYTES': 613L, 'OPERATION': 'download'}
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 4975] ERROR (service:96) catch_error: Template import error: No VM configure file found.
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/agent/service.py", line 94, in wrapper
return func(*args)
File "/usr/lib64/python2.4/site-packages/agent/hypervisor/xenxm.py", line 1041, in import_template
raise RuntimeError('Template import error: %s' % err)
RuntimeError: Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] DEBUG (linux:879) ovs_async_proc: pid 4975 status 1 output Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:39 4987] DEBUG (service:77) storage_plugin_listFileSystems: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, True)
[2012-10-31 06:32:39 4987] INFO (storageplugin:108) storage_plugin_listFileSystems(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:142) ENTER: listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:257) EXIT : listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (service:85) storage_plugin_listFileSystems: call completed.
[2012-10-31 06:32:39 5005] DEBUG (service:77) discover_pool_filesystem: ()
[2012-10-31 06:32:39 5005] DEBUG (service:85) discover_pool_filesystem: call completed.

How did you get the template to where you staged it?
I'd say the template is corrupt or you only have a partial template.
I did notice the call to the template is based on the short name of the host. Can you confirm the VM manager can access the http path via short name?

I moved my iTunes Library and now the first track of most CDs is missing. Why? What can I do?

I have moved my iTunes library several times. Sometimes to free up space on the main drive, I have moved the library to an external drive. I have also moved the library when changing drives and changing computers. I find that most of the CDs I have imported into iTunes in the past are now missing the first track. It shows the sign, but I haven't been able to locate them. In many cases, I have given the CDs themselves away and so I have no easy way of re-importing the tracks. Why does iTunes do this? Is there something I can do in the future to prevent this from happening? It gets rather tedious to go through hundreds of CD and locate a single track for each one after upgrading a drive or the computer. HELP?

What process did you use for moving the library?
I have noticed iTunes on rare occasions loses files. Don't know why. Keep back ups. Before updating a backup run a script such as Dougscript List MIAs so you can make sure you aren't deleting your only copy should one get lost from your main drive.
You might want to note that it is a mistake giving away the CDs. When you no longer posess the CD you relinquish the right to keep a copy of the music. Also, as you are finding, you no longer have a backup source for the music.

Getting import error in jsp in creating war project of masthead for portal 7.31

Hi,
I am getting error in customize masthead war project in jsp for import statement.
<%@ page import="com.sapportals.htmlb.*"%>
<%@ page import="com.sapportals.htmlb.hovermenu.*"%>
<%@ page import="com.sap.security.api.UMFactory"%>
<%@ page import="com.sapportals.portal.prt.service.license.ILicenseService"%>
<%@ taglib uri="prt:taglib:tlhtmlb" prefix="hbj"%>
I have asked basis team for jar relative to these but they have not found in system.
We are using portal 7.31 version.
Kindly help me to remove this error from jsp.
Thanks in advance.

Hi Hemendra,
At first i have done this and after that even i was facing error that's why i created this thread.
Kindly check my first post for error.
Getting import error in jsp in creating war project of masthead for portal 7.31
This question is Not Answered.(Mark as assumed answered)
Swati Joshi Apr 29, 2015 12:34 PM
Hi,
I am getting error in customize masthead war project in jsp for import statement.
<%@ page import="com.sapportals.htmlb.*"%>
<%@ page import="com.sapportals.htmlb.hovermenu.*"%>
<%@ page import="com.sap.security.api.UMFactory"%>
<%@ page import="com.sapportals.portal.prt.service.license.ILicenseService"%>
<%@ taglib uri="prt:taglib:tlhtmlb" prefix="hbj"%>
I have asked basis team for jar relative to these but they have not found in system.
We are using portal 7.31 version.
Kindly help me to remove this error from jsp.
Thanks in advance.

Import error with MPEG-2 files: Brorsoft Video Converter to Apple Prores.

Hi,
The Brorsoft Video Converter software gives me an 'import error' message when I attempt to import files from a folder on my desktop. That folder contains many mpg files (MPEG-2 Video, AC3). Those files in the folder on my desktop came from a Sony video camera.
I need to convert those mpg files to Apple Prores 422 HQ so I can then edit them in Apple Final Cut Pro X.
But when I go to import those mpg files into the Brorsoft Video Converter software, it comes up with a message saying: 'import error', indicating that the Brorsoft Video Converter software does not understand the type of file.
I am on Mac OS X Version 10.6.8.
I've emailed Brorsoft support but I don't think English is their first language – they've emailed back to me asking for clarification of the problem. And I need the problem fixed as I have to edit this video for someone that has many waiting customers.
Could something have changed in the files when I copied them from the video camera to the desktop?
Thanks in advance.
Cheers,
Paul

Hi Tom,
Thanks for your prompt reply. I was using a friend's video camera – I've just texted him for the exact model of Sony video camera. I didn't yet have the Brorsoft Video Converter software when I had to give the video camera back to my friend. So, I copied the files off the video camera to my desktop.
It records onto an internal hard drive. And yes you're right, I don't need to go HQ. I also tried plain Apple Pro Res. That didn't work either. It comes up with 'Import error' message, so it seems like it just doesn't understand the file type.
When I go 'Get Info' on one of the files off the camera, it tells me it is an 'MPEG-2 video, AC3' file.
I'll try and get MPEG Streamclip like you suggested and see if that works.
Thanks again.
Cheers,
Paul

Import error as error number is -12018

Hi All,
While importing a project getting an error as:
Import Error: com.fatwire.cs.core.realtime.DataException: com.fatwire.assetapi.common.AssetAccessException: Error met whiling saving assets [AttrTypes:1415189814137] and the error number is -12018
https://docs.oracle.com/cd/E29542_01/apirefs.1111/e39371/MISC/errno.html shows error related to Missing publication. No clue..

-12018 means " Missing publication."
Since the DemoSite is a new site that doesn't exist in the CSDT target environment, I would import the site first, e.g.
java com.fatwire.csdt.client.main.CSDT http://hostOrIP:8080/cs/ContentServer username=fwadmin password=xceladmin resources=@SITE:DemoSite cmd=import
NOTE: Make sure the site was exported to your datastore before import.
Then, import assets of this site:
java com.fatwire.csdt.client.main.CSDT http://hostOrIP:8080/cs/ContentServer username=fwadmin password=xceladmin resources=@ALL_ASSETS:*;@ALL_NONASSETS:* fromSites=DemoSite cmd=import
Note that the parameter is fromSites, not fromSite.
See if this helps.
Thanks,
Yu-Chun

Import error: First track of disc

Similar Messages

Maybe you are looking for