Import error - key cannot be null

We upgraded to v7.5 (MS) back in December with no major issues, and everything has been functioning normally. But, a few days ago I tried to run an import package (we get our actual data into the program by creating a file from Oracle then importing it). I used our usual Transformation file, and was about to validate the data file. But, when I went to import the file it failed and said "Key cannot be null. Parameter name: key". Can somebody tell me what is causing this and how to fix it?

Hi Shawn,
If you are using CSV file for data upload, Try this and let me know if it works:
1. Go to the last record in your Row and Select the entire Row next to your last record.
2. Press "Shift", "Control" and "Down Arrow" key and delete the entire selection. It will not have any data anyways.
3. Go to the last record in your Column and select the entire Column next to your last record.
4. Press "Shift", "Control" and "Right Arrow" key and delete the entire selection.
5. Save the file and try uploading it again.
regards,
Amit

Similar Messages

Key cannot be null error

Hi
When loading data i'm getting the error
Key cannot be null.
Parameter name: key
What does this error mean? I have done this with a large load, then started testing with a small load. But Im still getting the same error.
Here is the full log
TOTAL STEPS 2
1. Convert Data:         completed in 0 sec.
2. LOAD AND PROCESS:     Failed in 0 sec.
3. Import:               completed in 0 sec.
[Selection]
FILE=\BPC\FINANCE\DataManager\DataFiles
BPC_GL_DATA.TXT
TRANSFORMATION=\BPC\FINANCE\DataManager\TransformationFiles
BPC_Transformation.xls
CLEARDATA= Yes
RUNLOGIC= No
CHECKLCK= No
[Messages]
Convert Data
Success
Record Count : 3
Accept Count : 3
Reject Count : 0
Skip Count   : 0
Key cannot be null.
Parameter name: key
I have looked at a similar thread and tried this. Was not helpfull for me.
BPC excel error
any assistance will be appreciated

Hi
I have looked more into this.
If I use the import package with the option "Merge data values" it works fine.
I can also use the clear data package fine with no problem.
I only get this error when i say "Replace & Clear Data Values" when using the import package.
This means my data is ok, my transformation is also ok.
I'm using BPC 7.5, has anyone had a similar problem?? I also tried using BPC 7 import package, still get the same error.
Any ideas is appreciated.

Exception: Error decoding message (Key cannot be null)

Hi guys,
     Coherence 3.3.1/389
     .Net API 3.3.1.2
     I've wrote small invocation task, which collects the info about cluster members, stores it to HashMap and return it as result. This is the code:
     NamedCache cache = CacheFactory.getCache(sCacheName);
     CacheService service = cache.getCacheService();
     Cluster cluster = service.getCluster();
     HashMap res = new HashMap();
     Set members = cluster.getMemberSet();
     Iterator iter = members.iterator();
     while(iter.hasNext())
     Member member = (Member)iter.next();
     res.put((Object)member.getProcessName(), new Integer(member.getPort()));
     As you can see if member.getProcessName() returns null, then null is placed to HashMap.
     When the result was returned to the client, I've got this exception:
     2007-10-04 09:55:45.849 <Error> (thread=Tangosol.Net.Messaging.Impl.ConnectionManager+ConnectionManagerDaemon): Error decoding message
     System.ArgumentNullException: Key cannot be null.
     Parameter name: key
     at System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
     at System.Collections.Hashtable.set_Item(Object key, Object value)
     at Tangosol.IO.Pof.PofStreamReader.ReadAsObject(Int32 typeId) in c:\dev\release.net\coherence-net-v3.3\src\Coherence\IO\Pof\PofStreamReader.cs:line 3446
     at Tangosol.IO.Pof.PofStreamReader.ReadObject(Int32 index) in c:\dev\release.net\coherence-net-v3.3\src\Coherence\IO\Pof\PofStreamReader.cs:line 2284
     at Tangosol.Net.Messaging.Impl.Response.ReadExternal(IPofReader reader) in c:\dev\release.net\coherence-net-v3.3\src\Coherence\Net\Messaging\Impl\Response.cs:line 117
     at Tangosol.Net.Messaging.Impl.Codec.Decode(IChannel channel, DataReader reader) in c:\dev\release.net\coherence-net-v3.3\src\Coherence\Net\Messaging\Impl\Codec.cs:line 118
     at Tangosol.Net.Messaging.Impl.Connection.DecodeMessage(DataReader reader) in c:\dev\release.net\coherence-net-v3.3\src\Coherence\Net\Messaging\Impl\Connection.cs:line 874
     I understood why it was happened, but I did not understood why it was masked and my client application was frozen until request time accured (180s).
     Why did you mask it?
     Regards,
     Dmitry.

Hi
Thanks for answered.
I tried to import just 6 lines but the same error.
Did you know, what could be?
I am pasting the log.
TOTAL STEPS 2
1. Convert Data:         completed in 1 sec.
2. Load and Process:     Failed in 1 sec.
3. Import:               completed in 1 sec.
[Selection]
FILE=\GrupoPit\FRATECO\DataManager\DataFiles
41010100001.csv
TRANSFORMATION=\GrupoPit\FRATECO\DataManager\TransformationFiles
Frateco.xls
CLEARDATA= Yes
RUNLOGIC= Yes
CHECKLCK= No
[Messages]
Convert Data
Success
Record Count : 6
Accept Count : 6
Reject Count : 0
Skip Count   : 0
Key cannot be null.
Parameter name: key

SOAP Error : Server was unable to process request. Key cannot be null.#

HI, When I process SOAP call from ABAP using class csoaptransporthttp->request_response, I am getting following error message:
"Server was unable to process request. > Key cannot be null.##Parameter name: key"
Is anybody as the clue to resolve this error ?

Hi,
if you're doing a SOAP client - did you compare with this example:
http://help.sap.com/saphelp_47x200/helpdata/en/2d/64d053e74911d6b2e400508b6b8a93/content.htm
Regards,
Michal Krawczyk

Login Management screen System.ArgumentNullException: Key cannot be null

Hi,
We are following the below technical note to configure BAM:
Tutorial: Oracle BAM Plans to collect data from JMS bus
(Tutorial_2_BAM_Administrator.doc)
Under the section "Creating a BAM user", when trying to create a new user, we noticed that there were two pre-existing entries for the user "aocdom1\aocrac" - one in lowercase and one in uppercase:
aocdom1\aocrac
AOCDOM1\AOCRAC
We did not find the "Delete" option in the Login Management screen. So we clicked on the edit option and deleted the username and full name for the user "aocrac" from the fields and saved the information. Now we are getting the below error whenever we enter into the Login Management screen:
System.ArgumentNullException: Key cannot be null.
Parameter name: key
at System.Collections.Hashtable.ContainsKey(Object key)
at Oracle.BAM.Administrator.ManageLogins.IsUnknownUser(SystemObject soUser, Hashtable& rhtUnknowns)
at Oracle.BAM.Administrator.ManageLogins
The screen is accepting creation of new users though.
Please let us know how to resolve above issue.
Regards,
Balu

Hi,
We are following the below technical note to configure BAM:
Tutorial: Oracle BAM Plans to collect data from JMS bus
(Tutorial_2_BAM_Administrator.doc)
Under the section "Creating a BAM user", when trying to create a new user, we noticed that there were two pre-existing entries for the user "aocdom1\aocrac" - one in lowercase and one in uppercase:
aocdom1\aocrac
AOCDOM1\AOCRAC
We did not find the "Delete" option in the Login Management screen. So we clicked on the edit option and deleted the username and full name for the user "aocrac" from the fields and saved the information. Now we are getting the below error whenever we enter into the Login Management screen:
System.ArgumentNullException: Key cannot be null.
Parameter name: key
at System.Collections.Hashtable.ContainsKey(Object key)
at Oracle.BAM.Administrator.ManageLogins.IsUnknownUser(SystemObject soUser, Hashtable& rhtUnknowns)
at Oracle.BAM.Administrator.ManageLogins
The screen is accepting creation of new users though.
Please let us know how to resolve above issue.
Regards,
Balu

Remote PowerShell Error: Value cannot be null

I am trying to run commands on our exchange server from another server, and I keep running into this problem regard less of the command I run. For example I am trying to run the New-MailboxExportRequest and I alway get the error "Value cannot be null."
If I run the command from the exchange server console it works fine.
the client machine is Server 2008 (x86) and the server is Server 2008 R2 (x64).
Here is the exact log of what I am doing
Windows PowerShell
Copyright (C) 2009 Microsoft Corporation. All rights reserved.
PS C:\Users\Administrator> Enter-PSSession -computerName SAM
[sam]: PS C:\Users\Administrator\Documents> Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010
[sam]: PS C:\Users\Administrator\Documents> new-mailboxexportRequest
cmdlet New-MailboxExportRequest at command pipeline position 1
Supply values for the following parameters:
Mailbox: eric
FilePath: C:\Test\eric.pst
Value cannot be null.
Parameter name: parameters
+ CategoryInfo :
+ FullyQualifiedErrorId : System.ArgumentNullException,Microsoft.Exchange.Management.RecipientTasks.NewMailboxExportRequest
[sam]: PS C:\Users\Administrator\Documents>
It seems that almost all the exchange commands do not work using this connection method. Can any one tell me what I am missing?

Have the remote powershell ever worked before?
Have you tried to use the procedure in the article below to connect the remote exchange server?
Connect Remote Exchange Management Shell to an Exchange Server
James Luo
TechNet Subscriber Support (http://technet.microsoft.com/en-us/subscriptions/ms788697.aspx)
If you have any feedback on our support, please contact [email protected]

Error "Values cannot be null"

Hello. I'm trying load a picture from file using the cards that are dealt. But the Error I get is the values cannot be null. I'm trying to use a build path with a string on the class FiveCard. Then I'm trying to call its property from the frmGameBoard. But
That's where the values cannot be null.
The files are saved in bin/Debug/Cards with extension of .gif with the name in lowercase. Example "bin/Debug/Cards/clubace.gif"
Here is the class FiveCard:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace Final_Project_Barry_Lovelace
    public class FiveCard : Deck
        private Card[] PlayerHand;
        private Card[] ComputerHand;
        private Card[] dealtPlayer;
        private Card[] dealtComputer;
        public void DealCards()
            PlayerHand = new Card[5];
            dealtPlayer = new Card[5];
            ComputerHand = new Card[5];
            PlayerHand = new Card[5];
            dealtComputer = new Card[5];
        public void Deal()
            DealCards();
            setDeck();
            getHand();
            sortCards();
            displayCards();
            compareHands();
        public void getHand()
            for(int i = 0; i < 5; i++)
                PlayerHand[i] = getDeck[i];
            for (int i = 5; i < 10; i++)
                ComputerHand[i - 5] = getDeck[i];
        public void sortCards()
            var queryPlayer = from hand in PlayerHand
                              orderby hand.MyValue
                              select hand;
            var queryComputer = from hand in ComputerHand
                                orderby hand.MyValue
                                select hand;
            var index = 0;
            foreach (var element in queryPlayer.ToList())
                dealtPlayer[index] = element;
                index++;
            index = 0;
            foreach (var element in queryComputer.ToList())
                dealtComputer[index] = element;
                index++;
        //display the cards
        public void displayCards()
            //declares a string to make a path
            string PHcard0 = dealtPlayer[0].GetDisplay().ToString().ToLower() + ".gif";
            string PHcard1 = dealtPlayer[1].GetDisplay().ToString().ToLower() + ".gif";
            string PHcard2 = dealtPlayer[2].GetDisplay().ToString().ToLower() + ".gif";
            string PHcard3 = dealtPlayer[3].GetDisplay().ToString().ToLower() + ".gif";
            string PHcard4 = dealtPlayer[4].GetDisplay().ToString().ToLower() + ".gif";
            string CHcard0 = dealtComputer[0].GetDisplay().ToString().ToLower() + ".gif";
            string CHcard1 = dealtComputer[1].GetDisplay().ToString().ToLower() + ".gif";
            string CHcard2 = dealtComputer[2].GetDisplay().ToString().ToLower() + ".gif";
            string CHcard3 = dealtComputer[3].GetDisplay().ToString().ToLower() + ".gif";
            string CHcard4 = dealtComputer[4].GetDisplay().ToString().ToLower() + ".gif";
        public string PHcard0 { get; set; }
        public string PHcard1 { get; set; }
        public string PHcard2 { get; set; }
        public string PHcard3 { get; set; }
        public string PHcard4 { get; set; }
        public string CHcard0 { get; set; }
        public string CHcard1 { get; set; }
        public string CHcard2 { get; set; }
        public string CHcard3 { get; set; }
        public string CHcard4 { get; set; }
        public void compareHands()
Here is the form frmGameBoard:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
namespace Final_Project_Barry_Lovelace
    public partial class frmGameBoard : Form
        public frmGameBoard()
            InitializeComponent();
        FiveCard newGame = new FiveCard();
        private void btnDeal_Click(object sender, EventArgs e)
            newGame.Deal();
            pcPH0.Image = (Bitmap)Cards.ResourceManager.GetObject(newGame.PHcard0);
            pcPH1.Image = (Bitmap)Cards.ResourceManager.GetObject(newGame.PHcard1);
            pcPH2.Image = (Bitmap)Cards.ResourceManager.GetObject(newGame.PHcard2);
            pcPH3.Image = (Bitmap)Cards.ResourceManager.GetObject(newGame.PHcard3);
            pcPH4.Image = (Bitmap)Cards.ResourceManager.GetObject(newGame.PHcard4);
            pcCH0.Image = (Bitmap)Cards.ResourceManager.GetObject(newGame.CHcard0);
            pcCH1.Image = (Bitmap)Cards.ResourceManager.GetObject(newGame.CHcard1);
            pcCH2.Image = (Bitmap)Cards.ResourceManager.GetObject(newGame.CHcard2);
            pcCH3.Image = (Bitmap)Cards.ResourceManager.GetObject(newGame.CHcard3);
            pcCH4.Image = (Bitmap)Cards.ResourceManager.GetObject(newGame.CHcard4);
I appreciate any help! If you haven't noticed. I'm new to C#

Why do you have string in this method?
public void displayCards()
//declares a string to make a path
string PHcard0 = dealtPlayer[0].GetDisplay().ToString().ToLower() + ".gif";
string PHcard1 = dealtPlayer[1].GetDisplay().ToString().ToLower() + ".gif";
string PHcard2 = dealtPlayer[2].GetDisplay().ToString().ToLower() + ".gif";
string PHcard3 = dealtPlayer[3].GetDisplay().ToString().ToLower() + ".gif";
string PHcard4 = dealtPlayer[4].GetDisplay().ToString().ToLower() + ".gif";
string CHcard0 = dealtComputer[0].GetDisplay().ToString().ToLower() + ".gif";
string CHcard1 = dealtComputer[1].GetDisplay().ToString().ToLower() + ".gif";
string CHcard2 = dealtComputer[2].GetDisplay().ToString().ToLower() + ".gif";
string CHcard3 = dealtComputer[3].GetDisplay().ToString().ToLower() + ".gif";
string CHcard4 = dealtComputer[4].GetDisplay().ToString().ToLower() + ".gif";
Change it as only variable name as:
public void displayCards()
//declares a string to make a path
this.PHcard0 = dealtPlayer[0].GetDisplay().ToString().ToLower() + ".gif";
this.PHcard1 = dealtPlayer[1].GetDisplay().ToString().ToLower() + ".gif";
this.PHcard2 = dealtPlayer[2].GetDisplay().ToString().ToLower() + ".gif";
this.PHcard3 = dealtPlayer[3].GetDisplay().ToString().ToLower() + ".gif";
this.PHcard4 = dealtPlayer[4].GetDisplay().ToString().ToLower() + ".gif";
this.CHcard0 = dealtComputer[0].GetDisplay().ToString().ToLower() + ".gif";
this.CHcard1 = dealtComputer[1].GetDisplay().ToString().ToLower() + ".gif";
this.CHcard2 = dealtComputer[2].GetDisplay().ToString().ToLower() + ".gif";
this.CHcard3 = dealtComputer[3].GetDisplay().ToString().ToLower() + ".gif";
this.CHcard4 = dealtComputer[4].GetDisplay().ToString().ToLower() + ".gif";

"WITH" causes key cannot be null

Hi
Is the problem using "WITH" in sql statement with bind variables solved.i am using ODP.NET 9.2.0.4.01 version.Are there any patches to solve the above problem.
regards
srinivas

Hi
I have looked more into this.
If I use the import package with the option "Merge data values" it works fine.
I can also use the clear data package fine with no problem.
I only get this error when i say "Replace & Clear Data Values" when using the import package.
This means my data is ok, my transformation is also ok.
I'm using BPC 7.5, has anyone had a similar problem?? I also tried using BPC 7 import package, still get the same error.
Any ideas is appreciated.

"Value cannot be null" error when trying to edit or create Maintenance Plan in SQL Server 2008

I have SQL Server 2008 installed on Windows Server 2008 64bit, every time I try to open or create a new Maintenance Plan I receive the error:
Value cannot be null.
Parameter name: component (System.Design)
Program Location:
   at System.ComponentModel.Design.DesignerHost.System.ComponentModel.Design.IDesignerHost.GetDesigner(IComponent component)
   at Microsoft.DataTransformationServices.VsIntegration.DtsDesignerService.OpenDesigner(String connectionString, Object connection, String objectUrn)
   at Microsoft.SqlServer.Management.DatabaseMaintenance.MaintDesignerMenuHandler.Invoke()
And in the Design view screen
"Microsoft SQL Server Management Studio is unable to load this document: Could not load type 'Microsoft.SqlServer.Dts.runtime.Wrapper.IDTSPackageSigning100' from assembly 'Microsoft.SqlServer.DTSRunTimeWrap, Version=10.0.0.0, Culture=neutral'.
I have searched for a possible solution and have tried some suggestions of registering the msxml6.dll but and have installed VS2008 SP1 but I'm not in a position where I can do a full reinstall of SQL Server right now. Any help is appreciated. My SQL server
environment information is below.
Microsoft SQL Server Management Studio
10.0.1600.22 ((SQL_PreRelease).080709-1414 )
Microsoft Analysis Services Client Tools
2007.0100.1600.022 ((SQL_PreRelease).080709-1414 )
Microsoft Data Access Components (MDAC)
6.0.6002.18005 (lh_sp2rtm.090410-1830)
Microsoft MSXML 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 8.0.6001.18943
Microsoft .NET Framework 2.0.50727.4206
Operating System 6.0.6002

I digged a little deeper and figured out it was a missing directory/file in %TEMP%. Seems some CleaningTool removes all files/directories in %Temp% and after that SSMS was not working any longer. The missing file is actually not needed, but the
missing directory causes the "Value cannot be null" error.
My missing file name was:
C:\Users\<username>\AppData\Local\Temp\2\6vvdaozf.tmp
But the file name changes on every startup.
So my missing directory name was:
C:\Users\<username>\AppData\Local\Temp\2
After creating a empty directory with the name "2" in %TEMP% all went back to work fine for me.
I'm not sure the directory name is every time the same, but you can discover your missing file with the process monitor from Sysinternal Tools and filters to "Process Name is ssms.exe" and "Path contains AppData\Local\Temp"
Hope this helps other people to solve their issues too.
Thank you!! When I run %temp% it takes me to "C:\Users\Admin ...~\AppData\Local\Temp\some random number". At first the random number was 3, after I logged off and back on it was 2. My temp variable in enviromental variables is correct. I looked on another machine
running SQL2008 and temp is correct there. If I try to rename the numbered folder SSMS stops working. Any idea?

Ironport certificate key cannot be parsed or found

i uploaded this certification to the WSA and it returned this error "Key cannot be parsed or found"
i am using a csr generated by the WSA
what could be the issue

Have you enaled TDE for any user database? if yes, and you do not want to continue with having TDE encryption, then you need to run the first command by changing the dbname to that user database instead of master.
ALTER DATABASE DBName SET ENCRYPTION OFF
You can run below command to see if any database are encrypted using TDE
Select is_encrypted,* from sys.databases
Keerthi Deep | Blog SQLServerF1 |
Facebook

Error when cloning a AD connector (cannot insert NULL into ("OIMUSER"."OIU"

I am getting below error when trying to clone AD connector (new resource). I Imported/Exported AD resource Object, Process form and the dependent lookup tables.
I can see the new resource object, process definition, process forms and Recon rule, when i tried provision a the new resource i see this error in logs.
DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT], Importing ProcessAdministrator(XMLCREATED)
DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT], Object is being created
DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT], Creating data object
DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT],Creating data object with params: com.thortech.xl.dataobj.tcDataBase@14d388c,41,null,[B@9355bd
DEBUG,23 Dec 2010 02:34:45,803,[XELLERATE.DDM.IMPORT], Resolving dependency to {UserGroup=SYSTEM ADMINISTRATORS}
DEBUG,23 Dec 2010 02:34:45,803,[XELLERATE.DDM.IMPORT], Dependency resolved with key: 1
DEBUG,23 Dec 2010 02:34:45,803,[XELLERATE.DDM.IMPORT], Saving data object
INFO,23 Dec 2010 02:34:46,256,[XELLERATE.DDM.STATS],Purging 6 prepared statements
ERROR,23 Dec 2010 02:35:52,663,[XELLERATE.DATABASE],Class/Method: tcDataBase/writeStatement encounter some problems: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
java.sql.SQLIntegrityConstraintViolationException: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:85)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:947)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3462)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1349)
     at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:159)
     at com.thortech.xl.dataaccess.tcDataBase.writePreparedStatement(Unknown Source)
     at com.thortech.xl.dataobj.PreparedStatementUtil.executeUpdate(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.insertImplementation(Unknown Source)
Please let me know if you have any idea..
Thanks..
Edited by: IDMuser19 on Dec 29, 2010 2:21 PM

After Setting Database to DEBUG mode i see below errors in the log
DEBUG,27 Dec 2010 16:26:44,850,[XELLERATE.DATABASE],select ost_launch_dependent, ost_key, ost_status from ost ost, obi obi where ost.obj_key=obi.obj_key and obi.obi_key=181
INFO,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],DB read: select upp_deny_list from upp,usr where usr.usr_key=upp.usr_key and usr.usr_key=21
DEBUG,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],select upp_deny_list from upp,usr where usr.usr_key=upp.usr_key and usr.usr_key=21
INFO,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],DB read: select pol_key, obi.obj_key from rqo,obi where rqo.obi_key = obi.obi_key and obi.obi_key = 181
DEBUG,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],select pol_key, obi.obj_key from rqo,obi where rqo.obi_key = obi.obi_key and obi.obi_key = 181
INFO,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],DB read: select evt.evt_key, evt.evt_name, evt.evt_package from dob dob, evt evt, dvt dvt where dob.dob_key=dvt.dob_key and dvt.evt_key=evt.evt_key and (dob.dob_name='com.thortech.xl.dataobj.tcOIU' or dob.dob_name='com.thortech.xl.dataobj.tcTableDataObj' or dob.dob_name='com.thortech.xl.dataobj.tcDataObj' ) and dvt.dvt_pre_insert_sequence>0 order by dvt.dvt_pre_insert_sequence
DEBUG,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],select evt.evt_key, evt.evt_name, evt.evt_package from dob dob, evt evt, dvt dvt where dob.dob_key=dvt.dob_key and dvt.evt_key=evt.evt_key and (dob.dob_name='com.thortech.xl.dataobj.tcOIU' or dob.dob_name='com.thortech.xl.dataobj.tcTableDataObj' or dob.dob_name='com.thortech.xl.dataobj.tcDataObj' ) and dvt.dvt_pre_insert_sequence>0 order by dvt.dvt_pre_insert_sequence
DEBUG,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],insert into oiu (OIU_KEY, OBI_KEY, USR_KEY, OIU_SERVICEACCOUNT, OIU_CREATE, OIU_CREATEBY, OIU_UPDATE, OIU_UPDATEBY, oiu_rowver) values (?, ?, ?, ?, ?, ?, ?, ?, ?)
DEBUG,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],select OIU_seq.nextval from dual
ERROR,27 Dec 2010 16:26:44,928,[XELLERATE.DATABASE],Class/Method: tcDataBase/writeStatement encounter some problems: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
java.sql.SQLIntegrityConstraintViolationException: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:85)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
INFO,27 Dec 2010 16:26:44,990,[XELLERATE.DATABASE],DB read: select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
DEBUG,27 Dec 2010 16:26:44,990,[XELLERATE.DATABASE],select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
ERROR,27 Dec 2010 16:26:45,006,[XELLERATE.SERVER],Class/Method: tcDataObj/save Error :Insertion of dataobject into database failed
INFO,27 Dec 2010 16:26:45,006,[XELLERATE.DATABASE],DB read: select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
DEBUG,27 Dec 2010 16:26:45,006,[XELLERATE.DATABASE],select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
ERROR,27 Dec 2010 16:26:45,006,[XELLERATE.DATABASE],Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
java.lang.Exception: Rollback Executed From
     at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
Thanks .... Please reply if you have any idea..

Error for the fact table while processing the cube - attribute key cannot be found when processing

Please help as I am new to SSAS and this is urgent requirement. This is a MOLAP cube and below is the error that I am receiving when processing the cube. The cube is set to Prrocess Full. Several similar errors are popped up for various dimensions.
"Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table: 'Fact_Table', Column: 'ID', Value: '1'. The attribute is 'Id'. Errors in the OLAP storage engine: The attribute key was converted to an unknown member because
the attribute key was not found. Attribute Id of Dimension: 17 - Ves - PoC Cont from Database: DB, Cube: IPNCube, Measure Group: iSrvy, Partition: Partition1, Record: 1."
Thanks in advance.

Thanks for the recommendations David.
It will be really great if you can clear some of my doubts:
To my information, all the dimensions need to be processed first and then the fact table will be processed.
So if the ID's are not present in the dimension tables, then it should not be present in the Fact table either.
Here we found null values in the dimension table and the ID's were present in the Fact table. What might be the reasons causing such situation?
Also how frequently the cube needs to be processed? Currently the ETL which processes the cube, is scheduled in a SQL Job Agent on hourly basis everyday.
Is there any possibilty that the cube might be under processing state and the SQL job for the next run getting executed trying to access and process the cube while it was still processing?

TypeError: Error #1009: Cannot access a property or method of a null object reference.

Hi all,
I am new to ActionScript and Flash, and I am getting this error: TypeError: Error #1009: Cannot access a property or method of a null object reference.
at jessicaclucas_fla::MainTimeline/stopResumescroll()
I have several different clips in one movie that have scrolling content. When I click a button to move to a different clip that doesn’t have a certain scroll, it gives me this error. I cannot figure out how to fix this. You can see the site I am working on: http://www.jessicaclucas.com. I would really appreciate some help! Thank you in advance. Here is the code:
//Import TweenMax and the plugin for the blur filter
import gs.TweenMax;
import gs.plugins.BlurFilterPlugin;
//Save the content’s and mask’s height.
//Assign your own content height here!!
var RESUMECONTENT_HEIGHT:Number = 1500;
var RESUME_HEIGHT:Number = 450;
//We want to know what was the previous y coordinate of the content (for the animation)
var oldResumeY:Number = myResumecontent.y;
//Position the content on the top left corner of the mask
myResumecontent.x = myResume.x;
myResumecontent.y = myResume.y;
//Set the mask to our content
myResumecontent.mask = myResume;
//Create a rectangle that will act as the Resumebounds to the scrollMC.
//This way the scrollMC can only be dragged along the line.
var Resumebounds:Rectangle = new Rectangle(resumescrollMC.x,resumescrollMC.y,0,450);
//We want to know when the user is Resumescrolling
var Resumescrolling:Boolean = false;
//Listen when the user is holding the mouse down on the scrollMC
resumescrollMC.addEventListener(MouseEvent.MOUSE_DOWN, startResumescroll);
//Listen when the user releases the mouse button
stage.addEventListener(MouseEvent.MOUSE_UP, stopResumescroll);
//This function is called when the user is dragging the scrollMC
function startResumescroll(e:Event):void {
//Set Resumescrolling to true
Resumescrolling = true;
//Start dragging the scrollMC
resumescrollMC.startDrag(false,Resumebounds);
//This function is called when the user stops dragging the scrollMC
function stopResumescroll(e:Event):void {
//Set Resumescrolling to false
Resumescrolling = false;
//Stop the drag
resumescrollMC.stopDrag();
//Add ENTER_FRAME to animate the scroll
addEventListener(Event.ENTER_FRAME, enterResumeHandler);
//This function is called in each frame
function enterResumeHandler(e:Event):void {
//Check if we are Resumescrolling
if (Resumescrolling == true) {
//Calculate the distance how far the scrollMC is from the top
var distance:Number = Math.round(resumescrollMC.y - Resumebounds.y);
//Calculate the percentage of the distance from the line height.
//So when the scrollMC is on top, percentage is 0 and when its
//at the bottom the percentage is 1.
var percentage:Number = distance / RESUME_HEIGHT;
//Save the old y coordinate
oldResumeY = myResumecontent.y;
//Calculate a new y target coordinate for the content.
//We subtract the mask’s height from the contentHeight.
//Otherwise the content would move too far up when we scroll down.
//Remove the subraction to see for yourself!
var targetY:Number = -((RESUMECONTENT_HEIGHT - RESUME_HEIGHT) * percentage) + myResume.y;
//We only want to animate the scroll if the old y is different from the new y.
//In our movie we animate the scroll if the difference is bigger than 5 pixels.
if (Math.abs(oldResumeY - targetY) > 5) {
//Tween the content to the new location.
//Call the function ResumetweenFinished() when the tween is complete.
TweenMax.to(myResumecontent, 0.3, {y: targetY, blurFilter:{blurX:22, blurY:22}, onComplete: ResumetweenFinished});
//This function is called when the tween is finished
function ResumetweenFinished():void {
//Tween the content back to “normal” (= remove blur)
TweenMax.to(myResumecontent, 0.3, {blurFilter:{blurX:0, blurY:0}});

Hi again,
Thank you for helping. I really appreciate it! Would it be easier to say, if resumescrollMC exists, then execute these functions? I was not able to figure out the null statement from your post. Here is what I am trying (though I am not sure it is possible). I declared the var resumescrollMC, and then I tried to put pretty much the entire code into an if (resumescrollMC == true) since this code only needs to be completed when resumescrollMC is on the stage. It is not working the way I have tried, but I am assuming I am setting up the code incorrectly. Or, an if statement is not supposed to be issued to an object:
//Import TweenMax and the plugin for the blur filter
import gs.TweenMax2;
import gs.plugins.BlurFilterPlugin2;
//Save the content's and mask's height.
//Assign your own content height here!!
var RESUMECONTENT_HEIGHT:Number = 1500;
var RESUME_HEIGHT:Number = 450;
var resumescrollMC:MovieClip;
if (resumescrollMC == true) {
//We want to know what was the previous y coordinate of the content (for the animation)
var oldResumeY:Number = myResumecontent.y;
//Position the content on the top left corner of the mask
myResumecontent.x = myResume.x;
myResumecontent.y = myResume.y;
//Set the mask to our content
myResumecontent.mask = myResume;
//Create a rectangle that will act as the Resumebounds to the scrollMC.
//This way the scrollMC can only be dragged along the line.
var Resumebounds:Rectangle = new Rectangle(resumescrollMC.x,resumescrollMC.y,0,450);
//We want to know when the user is Resumescrolling
var Resumescrolling:Boolean = false;
//Listen when the user is holding the mouse down on the scrollMC
resumescrollMC.addEventListener(MouseEvent.MOUSE_DOWN, startResumescroll);
//Listen when the user releases the mouse button
stage.addEventListener(MouseEvent.MOUSE_UP, stopResumescroll);
//This function is called when the user is dragging the scrollMC
function startResumescroll(e:Event):void {
//Set Resumescrolling to true
Resumescrolling = true;
//Start dragging the scrollMC
resumescrollMC.startDrag(false,Resumebounds);
//This function is called when the user stops dragging the scrollMC
function stopResumescroll(e:Event):void {
//Set Resumescrolling to false
Resumescrolling = false;
//Stop the drag
resumescrollMC.stopDrag();
//Add ENTER_FRAME to animate the scroll
addEventListener(Event.ENTER_FRAME, enterResumeHandler);
//This function is called in each frame
function enterResumeHandler(e:Event):void {
//Check if we are Resumescrolling
if (Resumescrolling == true) {
//Calculate the distance how far the scrollMC is from the top
var distance:Number = Math.round(resumescrollMC.y - Resumebounds.y);
//Calculate the percentage of the distance from the line height.
//So when the scrollMC is on top, percentage is 0 and when its
//at the bottom the percentage is 1.
var percentage:Number = distance / RESUME_HEIGHT;
//Save the old y coordinate
oldResumeY = myResumecontent.y;
//Calculate a new y target coordinate for the content.
//We subtract the mask's height from the contentHeight.
//Otherwise the content would move too far up when we scroll down.
//Remove the subraction to see for yourself!
var targetY:Number = -((RESUMECONTENT_HEIGHT - RESUME_HEIGHT) * percentage) + myResume.y;
//We only want to animate the scroll if the old y is different from the new y.
//In our movie we animate the scroll if the difference is bigger than 5 pixels.
if (Math.abs(oldResumeY - targetY) > 5) {
//Tween the content to the new location.
//Call the function ResumetweenFinished() when the tween is complete.
TweenMax.to(myResumecontent, 0.3, {y: targetY, blurFilter:{blurX:22, blurY:22}, onComplete: ResumetweenFinished});
//This function is called when the tween is finished
function ResumetweenFinished():void {
//Tween the content back to "normal" (= remove blur)
TweenMax.to(myResumecontent, 0.3, {blurFilter:{blurX:0, blurY:0}});

TypeError: Error #1009: Cannot access a property or method of a null object reference.      at FC_Home_A

Dear Sir,
I really need your valuable assistance i was about to finish a project but at very last moment i am stuck. Here is the explanation below...
I have two files called "holder.swf" and "slide.swf" i want to improt the "slide.swf" using this action below
var myLoader:Loader = new Loader();
var url:URLRequest = new URLRequest("slide.swf");
myLoader.load(url);
addChild(myLoader);
myLoader.x = 2;
myLoader.y = 2;
Also i have attached the flash file of "holder.swf". My concern is the moment i am calling the "slide.swf" inside the "holder.swf" it is showing the following error...
" TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at FC_Home_Ads_Holder_v2_fla::MainTimeline() "
Here are the files uploaded for your reference, please download this file http://www.touchpixl.com/ForumsAdobecom.zip
This error is being occured from "MainTimeline.as" file here is the code been use inside of this file below....
package FC_Home_Ads_Holder_v2_fla
    import __AS3__.vec.*;
    import adobe.utils.*;
    import com.danehansen.*;
    import com.greensock.*;
    import com.greensock.easing.*;
    import com.greensock.plugins.*;
    import flash.accessibility.*;
    import flash.desktop.*;
    import flash.display.*;
    import flash.errors.*;
    import flash.events.*;
    import flash.external.*;
    import flash.filters.*;
    import flash.geom.*;
    import flash.globalization.*;
    import flash.media.*;
    import flash.net.*;
    import flash.net.drm.*;
    import flash.printing.*;
    import flash.profiler.*;
    import flash.sampler.*;
    import flash.sensors.*;
    import flash.system.*;
    import flash.text.*;
    import flash.text.engine.*;
    import flash.text.ime.*;
    import flash.ui.*;
    import flash.utils.*;
    import flash.xml.*;
    public dynamic class MainTimeline extends flash.display.MovieClip
        public function MainTimeline()
            new Vector.<String>(6)[0] = "Productivity";
            new Vector.<String>(6)[1] = "Leadership";
            new Vector.<String>(6)[2] = "Execution";
            new Vector.<String>(6)[3] = "Education";
            new Vector.<String>(6)[4] = "Speed of Trust";
            new Vector.<String>(6)[5] = "Sales";
            super();
            addFrameScript(0, this.frame1);
            return;
        public function init():void
            var loc1:*=null;
            com.greensock.plugins.TweenPlugin.activate([com.greensock.plugins.Aut oAlphaPlugin]);
            loc1 = new flash.net.URLLoader(new flash.net.URLRequest(this.XML_LOC));
            var loc2:*;
            this.next_mc.buttonMode = loc2 = true;
            this.prev_mc.buttonMode = loc2;
            stage.scaleMode = flash.display.StageScaleMode.NO_SCALE;
            stage.align = flash.display.StageAlign.TOP_LEFT;
            loc1.addEventListener(flash.events.Event.COMPLETE, this.xmlLoaded, false, 0, true);
            this.prev_mc.addEventListener(flash.events.MouseEvent.CLICK, this.minusClick, false, 0, true);
            this.next_mc.addEventListener(flash.events.MouseEvent.CLICK, this.plusClick, false, 0, true);
            return;
        public function xmlLoaded(arg1:flash.events.Event):void
            var loc1:*=null;
            var loc2:*=0;
            this.xmlData = new XML(arg1.target.data);
            loc2 = 0;
            while (loc2 < this.LABELS.length)
                loc1 = new Btn(this.LABELS[loc2], loc2);
                this.btnHolder_mc.addChild(loc1);
                this.BTNS.push(loc1);
                trace(this.LABELS[loc2]);
                ++loc2;
            this.current = uint(this.xmlData.@firstPick);
            trace("-----width-----");
            trace(this.contentMask.width);
            var loc3:*=this.contentMask.width / this.LABELS.length;
            trace(loc3);
            loc2 = 0;
            while (loc2 < this.BTNS.length)
                this.BTNS[loc2].width = loc3;
                this.BTNS[loc2].x = loc3 * loc2;
                ++loc2;
            this.btnHolder_mc.addEventListener(flash.events.MouseEvent.CLICK, this.numClick, false, 0, true);
            this.selectMovie();
            return;
        public function numClick(arg1:flash.events.MouseEvent):void
            this.killTimer();
            this.current = arg1.target.i;
            this.selectMovie();
            return;
        public function killTimer():void
            this.timerGoing = false;
            if (this.timer)
                this.timer.reset();
                this.timer.addEventListener(flash.events.TimerEvent.TIMER, this.plusClick, false, 0, true);
                this.timer = null;
            return;
        public function selectMovie():void
            if (this.timerGoing)
                this.timer = new flash.utils.Timer(uint(this.xmlData.ad[com.danehansen.MyMath.modulo(t his.current, this.xmlData.ad.length())].@delay), 1);
                this.timer.start();
                this.timer.addEventListener(flash.events.TimerEvent.TIMER, this.plusClick, false, 0, true);
            while (this.holder_mc.numChildren > 0)
                this.holder_mc.removeChild(this.holder_mc.getChildAt(0));
            var loc1:*=new flash.display.Loader();
            loc1.load(new flash.net.URLRequest(this.xmlData.ad[com.danehansen.MyMath.modulo(thi s.current, this.xmlData.ad.length())].@loc));
            this.holder_mc.addChild(loc1);
            var loc2:*=0;
            while (loc2 < this.BTNS.length)
                this.BTNS[loc2].deselect();
                ++loc2;
            this.BTNS[com.danehansen.MyMath.modulo(this.current, this.xmlData.ad.length())].select();
            var loc3:*=this.BTNS[com.danehansen.MyMath.modulo(this.current, this.xmlData.ad.length())].x + this.BTNS[com.danehansen.MyMath.modulo(this.current, this.xmlData.ad.length())].width / 2 + this.btnHolder_mc.x;
            trace("addLength:" + this.xmlData.ad.length());
            trace(loc3, com.danehansen.MyMath.modulo(this.current, this.xmlData.ad.length()));
            com.greensock.TweenLite.to(this.indicator_mc, 0.3, {"x":loc3, "ease":com.greensock.easing.Cubic.easeOut});
            loc1.contentLoaderInfo.addEventListener(flash.events.Event.COMPLETE, this.adLoaded, false, 0, true);
            return;
        public function adLoaded(arg1:flash.events.Event):void
            var evt:flash.events.Event;
            var loc1:*;
            evt = arg1;
            try
                evt.target.content.xmlData = this.xmlData.ad[com.danehansen.MyMath.modulo(this.current, this.xmlData.ad.length())];
            catch (er:Error)
            return;
        public function minusClick(arg1:flash.events.MouseEvent):void
            this.killTimer();
            var loc1:*;
            var loc2:*=((loc1 = this).current - 1);
            loc1.current = loc2;
            this.selectMovie();
            return;
        public function plusClick(arg1:flash.events.Event):void
            if (arg1.type != "timer")
                this.killTimer();
            var loc1:*;
            var loc2:*=((loc1 = this).current + 1);
            loc1.current = loc2;
            this.selectMovie();
            trace("next");
            return;
        public function ENDED(arg1:flash.events.Event):void
            if (arg1.type != "timer")
                this.killTimer();
            var loc1:*;
            var loc2:*=((loc1 = this).current + 1);
            loc1.current = loc2;
            this.selectMovie();
            trace("next");
            return;
        public function STARTED(arg1:flash.events.Event):void
            this.killTimer();
            return;
        function frame1():*
            this.timerGoing = true;
            addEventListener("endNow", this.ENDED, false, 0, true);
            addEventListener("startNow", this.STARTED, false, 0, true);
            this.init();
            return;
        public const XML_LOC:String=stage.loaderInfo.parameters.xmlLoc ? stage.loaderInfo.parameters.xmlLoc : "home_ads.xml";
        public const LABELS:__AS3__.vec.Vector.<String>=new Vector.<String>(6);
        public const BTNS:__AS3__.vec.Vector.<Btn>=new Vector.<Btn>();
        public const TRANSITION_TIME:Number=0.2;
        public var contentMask:flash.display.MovieClip;
        public var btnHolder_mc:flash.display.MovieClip;
        public var holder_mc:flash.display.MovieClip;
        public var indicator_mc:flash.display.MovieClip;
        public var prev_mc:flash.display.MovieClip;
        public var next_mc:flash.display.MovieClip;
        public var current:int;
        public var xmlData:XML;
        public var timer:flash.utils.Timer;
        public var timerGoing:Boolean;
Here is the folder uploaded on the server for you to get clear picture, please click on this link to download the entire folder. http://www.touchpixl.com/ForumsAdobecom.zip
I am not being able to resolve the issue, it needs a master to get the proper solution. I would request you to help me.
Thanks & Regards
Sanjib Das

Here is the entire code of MainTimeline.as below, please correct it.
package FC_Home_Ads_Holder_v2_fla
    import __AS3__.vec.*;
    import adobe.utils.*;
    import com.danehansen.*;
    import com.greensock.*;
    import com.greensock.easing.*;
    import com.greensock.plugins.*;
    import flash.accessibility.*;
    import flash.desktop.*;
    import flash.display.*;
    import flash.errors.*;
    import flash.events.*;
    import flash.external.*;
    import flash.filters.*;
    import flash.geom.*;
    import flash.globalization.*;
    import flash.media.*;
    import flash.net.*;
    import flash.net.drm.*;
    import flash.printing.*;
    import flash.profiler.*;
    import flash.sampler.*;
    import flash.sensors.*;
    import flash.system.*;
    import flash.text.*;
    import flash.text.engine.*;
    import flash.text.ime.*;
    import flash.ui.*;
    import flash.utils.*;
    import flash.xml.*;
    public dynamic class MainTimeline extends flash.display.MovieClip
        public function MainTimeline()
            new Vector.<String>(6)[0] = "Productivity";
            new Vector.<String>(6)[1] = "Leadership";
            new Vector.<String>(6)[2] = "Execution";
            new Vector.<String>(6)[3] = "Education";
            new Vector.<String>(6)[4] = "Speed of Trust";
            new Vector.<String>(6)[5] = "Sales";
            super();
            addFrameScript(0, this.frame1);
            return;
        public function init():void
            var loc1:*=null;
            com.greensock.plugins.TweenPlugin.activate([com.greensock.plugins.AutoAlphaPlugin]);
            loc1 = new flash.net.URLLoader(new flash.net.URLRequest(this.XML_LOC));
            var loc2:*;
            this.next_mc.buttonMode = loc2 = true;
            this.prev_mc.buttonMode = loc2 = true;
            stage.scaleMode = flash.display.StageScaleMode.NO_SCALE;
            stage.align = flash.display.StageAlign.TOP_LEFT;
            loc1.addEventListener(flash.events.Event.COMPLETE, this.xmlLoaded, false, 0, true);
            this.prev_mc.addEventListener(flash.events.MouseEvent.CLICK, this.minusClick, false, 0, true);
            this.next_mc.addEventListener(flash.events.MouseEvent.CLICK, this.plusClick, false, 0, true);
            return;
        public function xmlLoaded(arg1:flash.events.Event):void
            var loc1:*=null;
            var loc2:*=0;
            this.xmlData = new XML(arg1.target.data);
            loc2 = 0;
            while (loc2 < this.LABELS.length)
                loc1 = new Btn(this.LABELS[loc2], loc2);
                this.btnHolder_mc.addChild(loc1);
                this.BTNS.push(loc1);
                trace(this.LABELS[loc2]);
                ++loc2;
            this.current = uint(this.xmlData.@firstPick);
            trace("-----width-----");
            trace(this.contentMask.width);
            var loc3:*=this.contentMask.width / this.LABELS.length;
            trace(loc3);
            loc2 = 0;
            while (loc2 < this.BTNS.length)
                this.BTNS[loc2].width = loc3;
                this.BTNS[loc2].x = loc3 * loc2;
                ++loc2;
            this.btnHolder_mc.addEventListener(flash.events.MouseEvent.CLICK, this.numClick, false, 0, true);
            this.selectMovie();
            return;
        public function numClick(arg1:flash.events.MouseEvent):void
            this.killTimer();
            this.current = arg1.target.i;
            this.selectMovie();
            return;
        public function killTimer():void
            this.timerGoing = false;
            if (this.timer)
                this.timer.reset();
                this.timer.addEventListener(flash.events.TimerEvent.TIMER, this.plusClick, false, 0, true);
                this.timer = null;
            return;
        public function selectMovie():void
            if (this.timerGoing)
                this.timer = new flash.utils.Timer(uint(this.xmlData.ad[com.danehansen.MyMath.modulo(this.current, this.xmlData.ad.length())].@delay), 1);
                this.timer.start();
                this.timer.addEventListener(flash.events.TimerEvent.TIMER, this.plusClick, false, 0, true);
            while (this.holder_mc.numChildren > 0)
                this.holder_mc.removeChild(this.holder_mc.getChildAt(0));
            var loc1:*=new flash.display.Loader();
            loc1.load(new flash.net.URLRequest(this.xmlData.ad[com.danehansen.MyMath.modulo(this.current, this.xmlData.ad.length())].@loc));
            this.holder_mc.addChild(loc1);
            var loc2:*=0;
            while (loc2 < this.BTNS.length)
                this.BTNS[loc2].deselect();
                ++loc2;
            this.BTNS[com.danehansen.MyMath.modulo(this.current, this.xmlData.ad.length())].select();
            var loc3:*=this.BTNS[com.danehansen.MyMath.modulo(this.current, this.xmlData.ad.length())].x + this.BTNS[com.danehansen.MyMath.modulo(this.current, this.xmlData.ad.length())].width / 2 + this.btnHolder_mc.x;
            trace("addLength:" + this.xmlData.ad.length());
            trace(loc3, com.danehansen.MyMath.modulo(this.current, this.xmlData.ad.length()));
            com.greensock.TweenLite.to(this.indicator_mc, 0.3, {"x":loc3, "ease":com.greensock.easing.Cubic.easeOut});
            loc1.contentLoaderInfo.addEventListener(flash.events.Event.COMPLETE, this.adLoaded, false, 0, true);
            return;
        public function adLoaded(arg1:flash.events.Event):void
            var evt:flash.events.Event;
            var loc1:*;
            evt = arg1;
            try
                evt.target.content.xmlData = this.xmlData.ad[com.danehansen.MyMath.modulo(this.current, this.xmlData.ad.length())];
            catch (er:Error)
            return;
        public function minusClick(arg1:flash.events.MouseEvent):void
            this.killTimer();
            var loc1:*;
            var loc2:*=((loc1 = this).current - 1);
            loc1.current = loc2;
            this.selectMovie();
            return;
        public function plusClick(arg1:flash.events.Event):void
            if (arg1.type != "timer")
                this.killTimer();
            var loc1:*;
            var loc2:*=((loc1 = this).current + 1);
            loc1.current = loc2;
            this.selectMovie();
            trace("next");
            return;
        public function ENDED(arg1:flash.events.Event):void
            if (arg1.type != "timer")
                this.killTimer();
            var loc1:*;
            var loc2:*=((loc1 = this).current + 1);
            loc1.current = loc2;
            this.selectMovie();
            trace("next");
            return;
        public function STARTED(arg1:flash.events.Event):void
            this.killTimer();
            return;
        function frame1():*
            this.timerGoing = true;
            addEventListener("endNow", this.ENDED, false, 0, true);
            addEventListener("startNow", this.STARTED, false, 0, true);
            this.init();
            return;
        public const XML_LOC:String=stage.loaderInfo.parameters.xmlLoc ? stage.loaderInfo.parameters.xmlLoc : "home_ads.xml";
        public const LABELS:__AS3__.vec.Vector.<String>=new Vector.<String>(6);
        public const BTNS:__AS3__.vec.Vector.<Btn>=new Vector.<Btn>();
        public const TRANSITION_TIME:Number=0.2;
        public var contentMask:flash.display.MovieClip;
        public var btnHolder_mc:flash.display.MovieClip;
        public var holder_mc:flash.display.MovieClip;
        public var indicator_mc:flash.display.MovieClip;
        public var prev_mc:flash.display.MovieClip;
        public var next_mc:flash.display.MovieClip;
        public var current:int;
        public var xmlData:XML;
        public var timer:flash.utils.Timer;
        public var timerGoing:Boolean;

DataGrid - Error #1009: Cannot access a property or method of a null object reference.

I am getting a runtime error when I click a button that fires
the addPerson function.
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
at main/addPerson()[C:\Documents and Settings\edunn\My
Documents\Flex Builder 3\workspace2\Test-1\src\main.mxml:178]
at main/___main_Button4_click()[C:\Documents and
Settings\edunn\My Documents\Flex Builder
3\workspace2\Test-1\src\main.mxml:228]
I am new to Action Script - and object programming - so
understand...
I do not understand what I have done wrong here...
I have a result list coming from an external web service that
populates in a datagrid. I'd like to be able to update that
datagrid and then push back to the web service the new array.
Any ideas?????
import mx.rpc.events.ResultEvent;
import mx.rpc.events.FaultEvent;
import mx.collections.ArrayCollection;
import generated.webservices.FxAppiaUserFeaturesService;
import generated.webservices.UserSimRingConfig;
import generated.webservices.SimRingType;
public var plist:ArrayCollection
//Updated Function to populate the data from WS
public function
retrieveUserSimRingConfig(e:ResultEvent):void {
var UsrSimRngCfgNumList:Array = new
UserSimRingConfig().simRingNumberList;
var plist:ArrayCollection = e.result.simRingNumberList;
dgSimPhoneList.dataProvider = plist;
if (e.result.active) {
chboxSimultaneousRingPhones.selected=true;
} else {
chboxSimultaneousRingPhones.selected=false;
if (e.result.simRingType == "NO_RING_WHILE_ONCALL") {
chboxSimultaneousRing.selected=true;
} else {
chboxSimultaneousRing.selected = false;
// Add a person to the ArrayCollection.
public function addPerson():void {
plist.addItem({simRingNumberList:txtPhoneNumber1.text});
I posted this in the General Section first by
mistake...

can u explain abt this line
var plist:ArrayCollection = e .
result.simRingNumberList;

Import error - key cannot be null

Similar Messages

Maybe you are looking for