Import Error (Partial Set failure with RC error code = 0x84020020 for rec
Hi,
While importing the data through xls file , i am getting the error message "Partial Set failure with RC error code = <0x84020020> for record number
0 through 212" and no record get created in Data manager.
Although i mapped all values , still it giving me an error message.
I tried to Import other data and it was all working fine.
Please guide
Regards
Sandeep Kumar
HI,
I checked the exl file and found that in the first column and first data was in text format ('0001)but later on when i change the record and moved it to the last record , it worked fine. I was able to load all records including ('0001)
I don't know wht the logic behind this:
if my first record was ('0001), system was giving me the error and not allowing me to load the data. But when i moved the record as the last record it not only allow me to load the records but allow ('0001) also.
If anyone have any clue , plz let me know.
Regards
Sandeep
Similar Messages
-
Document control failed due to error in [DOCMGR-CANCEL] with a return code
i am getting this error while calceling the purchase order "Document control failed due to error in [DOCMGR-CANCEL] with a return code of [OTHER]. "
I am doing the calcel like this
Nav: buyer work centre --> order
searche the po and then
select order --> cancel then click GO button
i gave the Reason as Cancel
communication method: email
Cancel Requisition: Yes
Please help on this, its urgent.
Thanks,
Vijay.Hi Vijay,
Check this MOS note.
Cancelling A Standard Purchase Order In Buyer Work Center Results In Error [Docmgr-Cancel] With A Return Code [ID 1338826.1]
Thanks
-Arif. -
Hi All,
My Web application is FBA application and I am using the lists.asmx services in my custom webpart. To run this lists.asmx service in FBA enabled site we need to use Authentication.asmx service..
I referred this link:
http://social.msdn.microsoft.com/Forums/en-US/sharepointdevelopment/thread/21867e28-75d5-42c8-850b-bfb5c5894eed .
I wrote a code as mentioned in this article but now I am getting error "The request failed with HTTP status 401: Unauthorized " for Authentication.asmx service itself. Can somebody help me why it is not working even everything looks
correct?
Thank you.
Regards,
Rahul Shinde.Hi Rahul,
Give permissions to the user on the web application.
Central Admin -->Application Management --> Application Security -->Policy for web application --> Select the
web application --> Add User
For more information, refer to
http://microsoftdev.blogspot.com/2009/10/sharepoint-web-services-access-give.html
http://www.codeproject.com/Articles/24244/Access-a-Forms-Based-SharePoint-Site-s-Web-Service
Best Regards.
Kelly Chen
TechNet Community Support -
When I run ical on my mac I get the error:
The server responded with an error.
The request for account “Yahoo!” failed.
The server responded with
“504”
to operation CalDAVAccountRefreshQueueableOperation.
I hit "go online" and almost immediately I get the same message again. Any ideas?I am tired of how Yahoo has gotten worse and worse. It is the ONLY account I get problems with DAILY (even after removing and re-adding). AOL will act up once in a while not taking a saved password but accepting it when OK is clicked.... But Yahoo is always responding with such errors.... Today's calendar error is:
The request (CalDAVAccountRefreshQueueableOperation) for account “Yahoo” failed. -
I share an iTunes account with my daughter, I just got an ipad and need to set up with my own I'd for iCloud sync how can I keep my apps and music?
ColleenMcG wrote:
You can continue to share the same iTunes account ID with your daughter and set up a separate iCloud account with a different ID.
=> is this a different iCloud account for each device? I thought iCloud account ID had to match some iTunes account ID, for which we only have one i Tunes account?
You need to set up a separate iCloud account for each person that does not want to share their iCloud data. If you share an iCloud account with someone, any data you both sync with the shared account is merged, and you end up with each other's data on your device(s). If, for example, you owned two devices and someone else in the family also owned two devices, you would both want your own iCloud accounts, and you would each set up your personal iCloud account on the two devices you own. In other words, you want a separate iCloud account for each person to be used on the devices they own. Each iCloud account has to have a separate Apple ID. The ID does not need to be the same as the ID used for iTunes. Many families perfer to share the same iTunes account/ID, but maintain separate iCloud accounts with different IDs to keep there data separated.
ColleenMcG wrote:
It does not need to be the same as the ID used for iCloud.
=> what ID, iTunes? So I can have a separate iCloud account "only" ID which I also assume must be some [valid] email address? The children currently do not have email accounts anywhere.
Yes, I was referring to the iTunes ID not needing to be the same as the ID used for iCloud. In order to set up an Apple ID your children will need to have a valid email address that can be verified by Apple. Apple requires this so they have a way of contacting the owner if there is a problem with the account, such as when you may need to reset the password on the account. When you set up the ID, Apple will send a verification email to this email account and you will need to click on the verificating link in the email to complete the process. If they don't currently have an email account you can just set one up with gmail or another free email hosting service. They don't have to use the account but you will need it to set up the ID. -
Backup completed with status "communications failure with client" error
Hi
Getting error while taking filesystem backup of client in oracle secure backup.
We have administrator server & media server on same server.
We want to take backup of filesystem/rman backup of client host...but unable to communicate.
following steps have done
1.install oracle secure backup client on host
2. add host in administrator domain server
3.check connectivity from administrator server to client host but getting following error
[root@isgmmlds06 ~]# obtool pingh isgmmlds250.insolutionsglobal.local
Error: can't connect to NDMP server on isgmmlds250.insolutionsglobal.local (address isgmmlds250.insolutionsglobal.local) - timeout waiting for connection status message
isgmmlds250.insolutionsglobal.local (address isgmmlds250.insolutionsglobal.local): Oracle Secure Backup services are available
also tried to take filesystem backup but getting following error
2011/09/28.19:50:49 Job created.
2011/09/28.19:50:49 Dispatching job to run on administrative server.
2011/09/28.19:53:59 Backup completed with status "communications failure with client".
2011/09/28.19:53:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.20:09:55 Dispatching job to run on administrative server.
2011/09/28.20:09:59 Backup completed with status "communications failure with client".
2011/09/28.20:09:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.20:25:55 Dispatching job to run on administrative server.
2011/09/28.20:25:59 Backup completed with status "communications failure with client".
2011/09/28.20:25:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.20:41:55 Dispatching job to run on administrative server.
2011/09/28.20:41:59 Backup completed with status "communications failure with client".
2011/09/28.20:41:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.20:57:55 Dispatching job to run on administrative server.
2011/09/28.20:57:59 Backup completed with status "communications failure with client".
2011/09/28.20:57:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.21:13:55 Dispatching job to run on administrative server.
2011/09/28.21:13:59 Backup completed with status "communications failure with client".
2011/09/28.21:13:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
2011/09/28.21:29:55 Dispatching job to run on administrative server.
2011/09/28.21:29:59 Backup completed with status "communications failure with client".
2011/09/28.21:29:59 (Diagnostic data: 0x20008F06/21, dev_delay 0, data_delay 900, fail, data_err.)
Note : we are able to take filesystem/rman backup of same server where administrator domain & media server is installed.
please revert.
Regards
shdoutput for pingh
from administartor server
[root@isgmmlds06 ~]# obtool pingh isgmmlds250.insolutionsglobal.local
isgmmlds250.insolutionsglobal.local (address isgmmlds250.insolutionsglobal.local): Oracle Secure Backup and NDMP services are available
and from cllient server
[root@isgmmlds250 ~]# obtool pingh isgmmlds06
isgmmlds06 (address isgmmlds06): Oracle Secure Backup and NDMP services are available
Error: can't connect to Oracle Secure Backup service daemon on isgmmlds06 (address 169.254.95.120) - operation timed out -
For about two days all my devices have been failing to sync, with "Unknown error" in the bottom bar, and errors like this in the sync logs:
<pre><nowiki>1366935522699 Sync.Tracker.History DEBUG Saving changed IDs to history
1366935524160 Sync.Collection DEBUG mesg: POST success 200 https://phx-sync500.services.mozilla.com/1.1/zackw/storage/history
1366935524160 Sync.Collection DEBUG POST success 200 https://phx-sync500.services.mozilla.com/1.1/zackw/storage/history
1366935524544 Sync.Engine.History INFO Uploading 100 - 200 out of 643 records
1366935524547 Sync.Collection DEBUG POST Length: 53358
1366935525789 Sync.Collection DEBUG mesg: POST success 200 https://phx-sync500.services.mozilla.com/1.1/zackw/storage/history
1366935525789 Sync.Collection DEBUG POST success 200 https://phx-sync500.services.mozilla.com/1.1/zackw/storage/history
1366935525981 Sync.Engine.History INFO Uploading 200 - 300 out of 643 records
1366935525985 Sync.Collection DEBUG POST Length: 48900
1366935527259 Sync.Collection DEBUG mesg: POST success 200 https://phx-sync500.services.mozilla.com/1.1/zackw/storage/history
1366935527259 Sync.Collection DEBUG POST success 200 https://phx-sync500.services.mozilla.com/1.1/zackw/storage/history
1366935527654 Sync.Engine.History INFO Uploading 300 - 400 out of 643 records
1366935527657 Sync.Collection DEBUG POST Length: 47409
1366935527786 Sync.Collection DEBUG mesg: POST fail 400 https://phx-sync500.services.mozilla.com/1.1/zackw/storage/history
1366935527786 Sync.Collection DEBUG POST fail 400 https://phx-sync500.services.mozilla.com/1.1/zackw/storage/history
1366935527786 Sync.Engine.History DEBUG Uploading records failed: <h2>Client sent a bad request.</h2>
1366935527795 Sync.Status DEBUG Status for engine history: error.engine.reason.record_upload_fail
1366935527795 Sync.Status DEBUG Status.service: success.status_ok => error.sync.failed_partial
1366935527795 Sync.ErrorHandler DEBUG history failed: <h2>Client sent a bad request.</h2>
No traceback available
1366935527795 Sync.Synchronizer INFO Sync completed at 2013-04-25 20:18:47 after 14.18 secs.
1366935527795 Sync.SyncScheduler DEBUG Next sync in 600000 ms.
1366935527796 Sync.ErrorHandler DEBUG Some engines did not sync correctly.</nowiki></pre>They are having sync server issues for the past few days.
https://services.mozilla.com/status/
https://twitter.com/mozservices
'''''Mozilla Services @mozservices 26m'''''
'''''Sorry folks, we're still experiencing some intermittent server/hardware issues with sync. We really do appreciate your patience!''''' -
Flex Error #1001: Digest mismatch with RSL error
I apologize if this is not the correct location for this question but it was the closest I could find.
I am working in salesforce trying to add a new content pack. This screen uses a tool written in flash. The screen that comes up is an error with the following:
Flex Error #1001: Digest mismatch with RSL
https://cs13.salesforce.com/_swf/121310/sfc/flex/framework_3.5.0.12683.swf.
Redeploy the matching RSL or relink your application with the matching
library.
I have been working with SalesForce support but they don't have a clue and want to punt to Adobe.
The support staff at SalesForce has no trouble accessing the page with the flash control from thier pc. I have tried several computers in my office and from several browsers (IE 9 and Chrome). I have reinstalled Flash Player 11 and cleared browser caches. Nothing seems to work.
It has to be something common to computers in my office or my network. All of the information I can find on the Internet talks about rebuilding the application and redeploying it. I can't do that since this is part of SalesForce and not something I own. Also, it works for them on their computers.
I am running windows 7 64 bit. I have McAfee running (and have checked that Flash is not blocked).
The flash player itself works when I go to the Adobe site and try other content.
The only other odd thing I have is that my hard drive is encrypted.
Any ideas?
Thanks,
MikeChris,
I have cleared the browsser and flash cache data then restarted browswers and windows. Still no luck. I reverted the flash player back to 10.3 after following the instructions in the link you provided for a clean install but still get the error. SalesForce did not state what version of FlashPlayer they are using but I will check with them later today.
All of the machines that I have tested on have been at the office and all have encrypted hard drives with PGP desktop. I am going to try my laptop on my home network tonight to see if we are blocking something during the download.
This is driving me nuts. I know is it something specific to the machines in the office or the office network but I can't find it.
Thanks for your help. Please let me know if you have any other ideas.
Mike -
Ical Error :The server responded with an error.
Please help!!!!!!! I got Error Message :The server responded with an error. But I can't delete that event which is cause Error I can't find any library to delete my cacha please help!!!!!!!!!!!!!!
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.
-
System Refresh SAPINST.exe error ExeProcs was executed with status Error
Hi Everyone,
As part of system refresh, our QA ECC is restored with Production Data backup. In this process, sapinst.exe is executed to perform homogeneous system copy steps. This process is being terminated with error at the step *"Create SAP stored procedures"*.
The error being displayed is as follows:
An error occurred while processing option SAP Toools for MS SQL Server > Database Copy Completion( Last error reported by the step: Errors when executing sql command: [Microsoft][ODBC SQL Server Driver][SQL Server]The specified @job_name ('SAP CCMS_qpe_QPE_Update_Tabstats') does not exist.
SOLUTION: If this message is displayed as a warning, you can ignore it. If this is an error, contact SAP support.
). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY.
sapinst.log file contains following information:
INFO 2010-11-06 17:40:30
Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.4.xml'.
INFO 2010-11-06 17:40:30
Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.5.xml'.
INFO 2010-11-06 17:40:31
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2010-11-06 17:40:41
Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/keydb.3.xml'.
INFO 2010-11-06 17:40:41
Execute step ExeProcs of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssProcs|ind|ind|ind|ind|4|0.
ERROR 2010-11-06 17:40:58
FCO-00011 The step ExeProcs with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssProcs|ind|ind|ind|ind|4|0|ExeProcs was executed with status ERROR .
Our Environment details:
SAP Version : ECC6
OS : Microsoft windows server 2003
DB : Microsoft SQL Server 2005.
Can some please guide me in debugging this issue. Your help is highly appreciated.
Thanks a lot in advance.
Kind Regards,
Bharani.Hi Satya,
Thank you for the reply. QA in our landsacpe was in use since 2008. Serveral times system refresh is carried out on our QA with production data but never came accross this issue.
Usually if the SAPINST.exe run is successfull, temperory licence will be installed and we will be allowed to login into the sytem with our user names normally and carry out post installation steps.
As the SAPISNT.exe is being terminated, temperory license is not being installed and we got to work around by including parameter to allow default sap* userid and password to login and install license and carry on with the post installation steps. To be frank this issue is not really a show stopper, but there seems to be an issue that is to be resolved.
Thank you,
Kind Regards,
Bharani. -
I was connected to my Yahoo mail using ical but kept getting the error message. I deleted my Yahoo profile from ical and then added it again. Now all my entries in my Calendar are gone and I am still getting the error message.
I am tired of how Yahoo has gotten worse and worse. It is the ONLY account I get problems with DAILY (even after removing and re-adding). AOL will act up once in a while not taking a saved password but accepting it when OK is clicked.... But Yahoo is always responding with such errors.... Today's calendar error is:
The request (CalDAVAccountRefreshQueueableOperation) for account “Yahoo” failed. -
VPN error - Function CreateFile failed with an error code of 0x00000002
I got an error when connecting VPN, detailed messages are attached. I am using administrator to log on. The issue is there after I run a virus clean activity. Any help is appreciated.
Cisco Systems VPN Client Version 4.6.04.0043
Copyright (C) 1998-2005 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 5.1.2600 Service Pack 2
1 15:16:21.625 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
2 15:16:22.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
3 15:16:23.046 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
4 15:16:23.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
5 15:16:24.046 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
6 15:16:24.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
7 15:16:25.046 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
8 15:16:25.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
9 15:16:26.046 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
10 15:16:26.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)Please see my post in the IPsec and Firewall forum.
-
Error in set an Z field by code.
Hi;
I enhance the method on_save of save of account, because i need create a validate method to execute before on_save, but in the validate method i need to set a Z field by code. When I exit of validate method, this field is filled, but when i execute the standard code of on_save (because i call the standard code) the field exit empty.
Any suggestions?
Regards.Hi,
Once you set value to the field, modify the core and the cal the save method. Insert the below code after you set value to the
field,
Data: lr_core type ref to cl_crm_bol_entity.
lr_core = cl_crm_bol_core=>get_instance( ).
lr_core->modify( ).
Regards,
Arun -
Update book inventory with NEW company code assignment for the same site
Hi gurus ,
Our company have this business scenario:
the site has run in Company Code A for several month with business of Material Management function, then the site have to be changed to Company Code B for financial requirement .
What we want is we change the CC assignment by OX18 for site master without changing the site number (creating a new site master ),except for the open purchasing or sales document clearance , is there any way we can update the book inventory with new profit center corresponding to the CC B ?
Thanks in advance ,
RyanActually we have made some discussion with SAP consultant about this requirement ,and they suggest the same thing ,but for many reasons ,we need to make it that way ,and we also made some test for this direct changing by OX18 for new CC assignment .
All other questions are under control now , for financial reason ,we need to update the book inventory to new CC assignment (new profit center after site-specific material master changed ) in some batch session or program ,any idea for this? -
Error in setting value with prepareStament
Dear Friends,
I've a problem with prepareStatement while setting the value. Bellow i'm mentioning the error which i get while compiling. Could any please guide me what is the problem.
String str="insert into prep (id,name,age,dob) values (?,?,?,?))";
PreparedStatement pstmt=conn.prepareStatement(str);
pstmt.clearParameters ();
pstmt.setString(1,"dhananjay",28,"10/10/1975");
pstmt.execute();
pstmt.close();
while compiling bellow error comes :-
TLogin.java:214: setString(int,java.lang.String) in java.sql.PreparedStatement cannot be applied to (int,java.lang.String,int,java.lang.String)
pstmt.setString(1,"dhananjay",28,"10/10/1975");
^
Thanking you..
JayshriThanx Tom for your reply,
As you suggested i tried to use bellow code :
PreparedStatement pstmt=conn.con.prepareStatement("insert into prep(id,name,age,dob) values (?,?,?,?)");
pstmt.setString(1,1);
pstmt.setString(2,"dhananjay");
pstmt.setString(3,28);
pstmt.setString(4,"10/10/1975");
pstmt.execute();
it gave me bellow error :
TLogin.java:214: setString(int,java.lang.String) in java.sql.PreparedStatement cannot be applied to (int,int)
pstmt.setString(1,1);
^
TLogin.java:216: setString(int,java.lang.String) in java.sql.PreparedStatement cannot be applied to (int,int)
pstmt.setString(3,28);
^
so i changed the code to :
PreparedStatement pstmt=conn.con.prepareStatement("insert into prep(id,name,age,dob) values (?,?,?,?)");
pstmt.setString(1,"1");
pstmt.setString(2,"dhananjay");
pstmt.setString(3,"28");
pstmt.setString(4,"10/10/1975");
pstmt.execute();
above got compiled without error but while executing it is not inserting row in table, because id and age is integer in database and here i'm passing as string.
what i do to solve this problem?
thanking you.
Jayshri
Maybe you are looking for
-
One domain in different mailhost
Sorry for my english: it's very terrible! I have Sun Java Communication Suite with Sun Java(tm) System Messaging Server 6.3-0.15 (built Feb 9 2007) libimta.so 6.3-0.15 (built 18:37:56, Feb 9 2007) Linux public23.dmz.ritanet 2.6.9-55.ELsmp #1 SMP Fri
-
My macbook pro 13 inch early 2011 don't have an airplay mirroring. What should I do?
-
How to send 10000 records to RFC in packets of 1000 records
Hi Folks, I have to send some 10k record to a rfc and that RFC will return the details of those 10k records. Now since the processing time for all the 10k records crosses 5 hrs, RFC connection is getting failed. So i want to send the d
-
Anytime I go to charge my iPad starting Sunday It won't charge, it isn't even being detected my any of my computers Tested Scenarios: 27" i7 iMac 2x Xeon Mac Pro Macbook Pro Windows 7 64bit PC wall outlet.. All have the same end result - it doesn't t
-
Please help me with this basic JSF question!
Hi, I m creating a JSF website using Sun Studio Creator, i think the problem i have is quite basic, after a bit research, i still couldn't solve it, i hope someone can help me here, thanks. This is the scenario: There are 2 buttons on the page, B1 an