IMPORT ERROR : RFC Error
Dear Experts,
I have successfully upgraded Kernal Version from 129 to 175 in SAP ERP ECC 5.0, but when i am importing the queue the following error is coming.
System PRD
Command TMS_MGR_READ_TRANSPORT_QUEUE
Client 000 Service
Transport Service User TMSADM
Start Online
Date 03.08.2007
Function TMS_TP_SHOW_BUFFER
Time 13:49:42
Message TP_CALL_FAILED
Could not start transport control program tp
RFC error:
My SAP Version: ECC 5.0
DB : MS SQL SERVER 8.0
OS : WINDOWS NT
Please help me to find out the solution.
Regards,
Praveen Merugu
Hi ,
I m VASU, basis consultant from Bangalore.
I m unable to get the IMPORT QUEUE in STMS.
System PRD
Command TMS_MGR_READ_TRANSPORT_QUEUE
Client 000 Service
Transport Service User TMSADM
Start Online
Date 03.08.2007
Function TMS_TP_SHOW_BUFFER
Time 13:49:42
Message TP_CALL_FAILED
Could not start transport control program tp
RFC error:
My SAP Version: ECC 5.0
DB : MS SQL SERVER 2005.
OS : WINDOWS NT
I saw ur MSG in this forum....
Plzzz guide me how to reolve this issue at OS level...
I have tried updating the KERNAL level 142 to 175 , but still TP is not connecting.
Rest of all work in PRD is working fine ...only TP is not working due to this REQUESTS r not getting imported into PRD.
Tested tp connect <PRD> , R3trans -d, both were not giving any error..
Waiting for ur reply
VASU.G
[email protected]
Similar Messages
-
STMS, RFC-error,Name or password is incorrect (repeat logon)
hi.
I' ve problem with stsm
i do :
1) import request from development system to test system
2) quit from stms
3) start stms and refresh queues and recive error:"RFC-error,Name or password is incorrect (repeat logon)"
after this, i do "reset user tmsadm" and "generate rfc destination" in test system and all works.
But when i do 1) 2) 3) all repates again .Hello Denis
I have seen a problem recently relating to the error "Name or password is
inocorrect. Please re-enter." The error can be caused if you are not
using downward compatible passwords. Please check note 807895.
Ensure that the passwords are compatible, try entering the password in
uppercase and see if this helps.
Thanks
Kenny -
RFC ERROR timeout during allocate
Hi all,
We are trying to connect our ECC 6.0 system to ECC 5.0 system thru RFC we get the following error. Both the systems are available running
Timeout during connection setup. Please check partner availability
[abrfcio.c 8139]
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2799
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
DEST =RQ3CLNT300
HOST =168.189.35.139
SERV =sapdp11
GWHOST =dcecqv1
GWSERV =sapgw02
[abrfcio.c 8139]
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M Wed May 14 05:41:59 2008
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host dcecqv1 / sapgw02
M * ERROR timeout during allocate
M *
M * TIME Wed May 14 05:41:59 2008
M * RELEASE 700
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 242
M * MODULE gwr3cpic.c
M * LINE 1872
M * DETAIL no connect of TP sapdp11 from host cpchrpq1.clorox.com after
M * 20 sec
M * COUNTER 1679
M *
M *****************************************************************************
M
A RFC 2318 CONVID 77332474
A * CMRC=27 DATA=0 STATUS=0 SAPRC=242 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: DDIC (Client: 300)
A RFC> Destination: RQ3 (handle: 2, , {482AC1FF-A0EE-2871-E100-0000A8BD2A0B})
we have mentioned the system no, hostname..every thing correctly
Any help
Thanks
SenthilHi Senthil,
I had faced a similar issue working with my previous company. Upgrading the kernel had done the trick. I am not sure of the SAP note but please check Note, 827872 - Work process waits for registered RFC server
Regards,
Atul Lotlikar. -
RFC Error when using SAPRFC against a Unicode System
Hi Everybody,
I try to use the PHP SAPRFC extension against a Unicode System. When I call the client.php which comes with the source package from http://saprfc.sourceforge.net/ where I added:
"CODEPAGE"=>"4103", // codepage Unicode
"UNICODE"=>"1", // Unicode
to the $LOGIN array I get this error:
Warning: RFC Error Info : Group : 103 Key : RFC_ERROR_LOGON_FAILURE Message : D
in /var/www/saprfc/client.php on line 48
RFC connection failed with error:RFC Error Info : Key : C
Status : EXCEPTION SYSTEM_FAILURE RAISED Message : D Internal:
there are two trace files after the call. One called dev_rfc.trc with this content:
**** ERROR file opened at 20060605 050220 CEST, SAP-REL 640,0,119 RFC-VER 3 818129 MT-SL
T:1079532480 Error in program 'apache2': ======> D
T:1079532480 Error in program 'apache2':
<* RfcReceive [1] : returns 3:RFC_SYS_EXCEPTION
and a file called rfc27443_1079532480.trc:
**** Trace file opened at 20060605 050500 CEST, SAP-REL 640,0,119 RFC-VER 3 818129 MT-SL
<<< RfcOpenEx failed
>TS> Mon Jun 5 05:05:06 2006
resize I/O buffer to 16000 bytes
>>>> [7] <unknown> : EXT <ac: 74> L sapserver.test.com >>> OPEN
UUID: ab_drvstate create uuid {44839DD5-9DCE-6B32-E200-12FDBA107532}
>>>> [7] <unknown> : EXT <ac: 75> L sapserver.test.com >>> 45573492 (45573492)
-{44839DD5-9DCE-6B32-E200-12FDBA107532}
>>> RfcOpenEx ...
Got following connect_param string:
ASHOST=sapserver.test.com SYSNR=00 CLIENT=002 USER=developer PASSWD=*******
LANG=EN CODEPAGE=4103 UNICODE=1 TRACE=1
Send RFCHEADER: 01/LIT/IEEE/SPACE/4103
Send UNICODE-RFCHEADER: cp:4103/ce:IGNORE/te:REJECT/cs:1/rc:0x00000023
UUID: send_rfcuuid {44839DD5-9DCE-6B32-E200-12FDBA107532}
>>> Logon check: calling RFCPING
>>> RfcCall [7] ...
*> RfcCall
FUNCTION RFCPING
handle = 7
parameter = <NULL>
tables = <NULL>
UUID: RfcCallNew send the uuid to the partner {44839DD5-9DCE-6B32-E200-12FDBA107532}
>>>> [7] <unknown> : EXT <ac: 76> L sapserver.test.com >>> WRITE (45573492)
-{44839DD5-9DCE-6B32-E200-12FDBA107532}
000000 | D9C6C3F0 F0F0F0F0 F0F0F0E3 01010008 |................|
000010 | 01010101 04010003 01010103 00040000 |................|
000020 | 020B0103 0106000B 04010003 01000100 |................|
000030 | 00002301 06000700 0F313237 2E302E30 |..#......127.0.0|
000040 | 2E312020 20202020 00070011 00014500 |.1 ......E.|
000050 | 11001200 04363430 20001200 13000436 |.....640 ......6|
000060 | 34302000 13000800 20736172 67652D77 |40 ..... sarge-w|
000070 | 77772020 20202020 20202020 20202020 |ww |
000080 | 20202020 20202020 20000800 0600803C | ......<|
000090 | 756E6B6E 6F776E3E 00000000 00000000 |unknown>........|
0000a0 | 00000000 00000000 00000000 00000000 |................|
0000b0 | 00000000 00000000 00000000 00000000 |................|
0000c0 | 00000000 00000000 00000000 00000000 |................|
0000d0 | 00000000 00000000 00000000 00000000 |................|
0000e0 | 00000000 00000000 00000000 00000000 |................|
0000f0 | 00000000 00000000 00000000 00000000 |................|
000100 | 00000000 00000000 00000000 00000000 |................|
000110 | 06051400 10D59D83 44CE9D32 6BE20012 |........D..2k...|
000120 | FDBA1075 32051401 30000761 70616368 |...u2...0..apach|
000130 | 65320130 01110009 44455645 4C4F5045 |e2.0....DEVELOPE|
000140 | 52011101 17000D56 F94AFD31 E72211B4 |R......V.J.1."..|
000150 | 1DCED7F3 01170114 00033030 32011401 |..........002...|
000160 | 15000145 01150501 00010105 01050200 |...E............|
000170 | 00050200 0B000336 3430000B 01020007 |.......640......|
000180 | 52464350 494E4701 02051400 10D59D83 |RFCPING.........|
000190 | 44CE9D32 6BE20012 FDBA1075 320514FF |D..2k......u2...|
0001a0 | FF0000FF FF000000 00000000 00000000 |................|
>>>> [7] <unknown> : EXT <ac: 77> L sapserver.test.com >>> FLUSH(WRITE) (45573492)
-{44839DD5-9DCE-6B32-E200-12FDBA107532}
<* RfcCall [7] : returns 0:RFC_OK
>>>> [7] <unknown> : EXT <ac: 78> L sapserver.test.com >>> FLUSH(WRITE) (45573492)
-{44839DD5-9DCE-6B32-E200-12FDBA107532}
>>>> Listen/WaitForRequest (counter = 4)
>>>> [7] <unknown> : EXT <ac: 79> L sapserver.test.com >>> LISTEN (45573492)
-{44839DD5-9DCE-6B32-E200-12FDBA107532}
000000 | 01010008 01010101 04010003 01010103 |................|
000010 | 00040000 020B0103 0106000B 04010003 |................|
000020 | 01000200 00002301 06001600 08310031 |......#......1.1|
000030 | 00300030 00001600 07001E31 0030002E |.0.0.......1.0..|
000040 | 00310032 0038002E 00330036 002E0031 |.1.2.8...3.6...1|
000050 | 00350020 00200020 00000700 11000233 |.5. . . .......3|
000060 | 00001100 12000836 00320030 00200000 |.......6.2.0. ..|
000070 | 12001300 08360032 00300020 00001300 |.....6.2.0. ....|
000080 | 08004064 00650063 00720030 0034005F |[email protected]._|
000090 | 00430052 0034005F 00300030 00200020 |.C.R.4._.0.0. . |
0000a0 | 00200020 00200020 00200020 00200020 |. . . . . . . . |
0000b0 | 00200020 00200020 00200020 00200020 |. . . . . . . . |
0000c0 | 00200000 08000601 003C756E 6B6E6F77 |. .......<unknow|
0000d0 | 6E3E0000 00000000 00000000 00000000 |n>..............|
0000e0 | 00000000 00000000 00000000 00000000 |................|
0000f0 | 00000000 00000000 00000000 00000000 |................|
000100 | 00000000 00000000 00000000 00000000 |................|
000110 | 00000000 00000000 00000000 00000000 |................|
000120 | 00000000 00000000 00000000 00000000 |................|
000130 | 00000000 00000000 00000000 00000000 |................|
000140 | 00000000 00000000 00000000 00000000 |................|
000150 | 00000000 00000000 00000000 00000000 |................|
000160 | 00000000 00000000 00000000 00000000 |................|
000170 | 00000000 00000000 00000000 00000000 |................|
000180 | 00000000 00000000 00000000 00000000 |................|
000190 | 00000000 00000000 00000000 00000000 |................|
0001a0 | 00000000 00000000 00000000 00000000 |................|
0001b0 | 00000000 00000000 00000000 00000000 |................|
0001c0 | 00000000 00000000 00000605 140010D5 |................|
0001d0 | 9D8344CE 9D326BE2 0012FDBA 10753205 |..D..2k......u2.|
0001e0 | 14050000 00050004 03002E43 0041004C |...........C.A.L|
0001f0 | 004C005F 00460055 004E0043 00540049 |.L._.F.U.N.C.T.I|
000200 | 004F004E 005F004E 004F0054 005F0046 |.O.N._.N.O.T._.F|
000210 | 004F0055 004E0044 00040304 02004046 |.O.U.N.D......@F|
000220 | 0075006E 00630074 0069006F 006E0020 |.u.n.c.t.i.o.n. |
000230 | 006D006F 00640075 006C0065 00200022 |.m.o.d.u.l.e. ."|
000240 | 00524643 50494E22 0020006E 006F0074 |.RFCPIN". .n.o.t|
000250 | 00200066 006F0075 006E0064 002E0004 |. .f.o.u.n.d....|
000260 | 02FFFF00 00FFFF00 00000000 00000000 |................|
<* RfcListen [7] : returns 0:RFC_OK
>>> RfcReceive [7] ...
Received RFCHEADER [7]: 01/LIT/IEEE/SPACE/4103
Received UNICODE-RFCHEADER [7]: cp:4103/ce:IGNORE/te:REJECT/cs:2/rc:0x00000023
UUID: ab_rfccheck_uuid compare uuid's {44839DD5-9DCE-6B32-E200-12FDBA107532}
Error in program 'apache2': ======> F
>>>> [7] <unknown> : EXT <ac: 80> L sapserver.test.com >>> CLOSE abrfcrcv_mt.c 429 (45573492)
-{44839DD5-9DCE-6B32-E200-12FDBA107532}
*> RfcReceive
handle = 7
parameter = <NULL>
tables = <NULL>
Data conversion On
Error in program 'apache2': <* RfcReceive [7] : returns 3:RFC_SYS_EXCEPTION
>>>> [7] <unknown> : EXT <ac: 81> L sapserver.test.com >>> FREE abrfcio_mt.c 3517 (45573492)
-{44839DD5-9DCE-6B32-E200-12FDBA107532}
**** Trace file opened at 20060605 050506 CEST, SAP-REL 640,0,119 RFC-VER 3 818129 MT-SL
<<< RfcOpenEx failed
Our SAP Environment is:
- SAP Web AS 6.20 Unicode Kernel Patchlevel 1602
- Windows 2003 Server
- Oracle
On the PHP Side I use:
- Debian GNU/Linux 3.1 (Sarge)
- Apache 2 2.0.54-5
- PHP4 4.3.10-16
- SAPRFC 1.4.1
- SAP RFC SDK non Unicode 6.20 and 6.40 (The problem occurs in both versions)
Had anyone had sucess using SAPRFC against a Unicode System?
Regards
GregorHi Anton,
I've just tried your suggestion. I've commented out the CODEPAGE and UNICODE values in my Array and placed:
[code]saprfc_set_code_page($rfc, "4103");[/code]
after the
[code]$rfc = saprfc_open ($LOGIN);[/code]
The error message I get now is:
[code]Warning: RFC Error Info : Key : Status : EXCEPTION FU_NOT_FOUND RAISED Message :
Internal: in /var/www/saprfc/client.php on line 58
Discovering interface of function module RFC_READ_REPORT failed[/code]
In the trace File I see:
[code]>>>> [3] <unknown> : EXT <ac: 40> L sapserver.test.com >>> WRITE (80999721)
-{44839E3E-9E3B-6B30-E200-0534B0CD3057}
000000 | 05020000 0502000B 00063600 34003000 |..........6.4.0.|
000010 | 000B0102 00385200 46004300 5F004700 |.....8R.F.C._.G.|
000020 | 45005400 5F004600 55004E00 43005400 |E.T._.F.U.N.C.T.|
000030 | 49004F00 4E005F00 49004E00 54004500 |I.O.N._.I.N.T.E.|
000040 | 52004600 41004300 45005F00 50000102 |R.F.A.C.E._.P...|
000050 | 05140010 3E9E8344 3B9E306B E2000534 |....>..D;.0k...4|
000060 | B0CD3057 05140201 00104600 55004E00 |..0W......F.U.N.|
000070 | 43004E00 41004D00 45000201 0203001E |C.N.A.M.E.......|
000080 | 5246435F 52454144 5F524550 4F525420 |RFC_READ_REPORT |
000090 | 20202020 20202020 20202020 20200203 | ..|
0000a0 | 03010010 50004100 52004100 4D005300 |....P.A.R.A.M.S.|
0000b0 | 5F005000 03010330 00040000 00010330 |_.P....0.......0|
0000c0 | 03020008 000000D8 00000000 0302FFFF |................|
0000d0 | 0000FFFF 00000000 00000000 00000000 |................|
>>>> [3] <unknown> : EXT <ac: 41> L sapserver.test.com >>> FLUSH(WRITE) (80999721)
-{44839E3E-9E3B-6B30-E200-0534B0CD3057}
<* RfcCall [3] : returns 0:RFC_OK
>>> RfcReceive [3] ...
>>>> [3] <unknown> : EXT <ac: 42> L sapserver.test.com >>> FLUSH(WRITE) (80999721)
-{44839E3E-9E3B-6B30-E200-0534B0CD3057}
>>>> [3] <unknown> : EXT <ac: 43> L sapserver.test.com >>> READ (80999721)
-{44839E3E-9E3B-6B30-E200-0534B0CD3057}
000000 | 05000000 05000415 00044600 4C000415 |..........F.L...|
000010 | 04160002 45000416 04170006 30003400 |....E.......0.4.|
000020 | 36000417 04010018 46005500 5F004E00 |6.......F.U._.N.|
000030 | 4F005400 5F004600 4F005500 4E004400 |O.T._.F.O.U.N.D.|
000040 | 0401FFFF 0000FFFF 00000000 00000000 |................|
>>>> [3] <unknown> : EXT <ac: 44> L sapserver.test.com >>> FLUSH (READ) (80999721)
-{44839E3E-9E3B-6B30-E200-0534B0CD3057}[/code]
Regards
Gregor -
RFC Error Received while opening queries from BEx Analiser
Hi Friends,
We have recently upgraded BW 3.5 to BI 7.0 and installed SAP GUI 710.
When we try to open queries using old 3.5 BEx Analyser, we are getting error ' RFC Error Received '.
strange thing is, it is not happening with all the users. For some users it is working fine and for some users they are getting this error only on first instance when they login after upgrade and this error is not comming from second time onwards with out implementing any corrective actions. Some users are still getiing this error even on second time when they login after upgrade.
We are prety much confident that the authorisation is not an issue here. Not sure about the GUI.
Pls help me to understand the possible resons for this error and how we can fix it.
Thanks,
NanvakanthMorning Experts,
I have the same problem while opening the Query Designer or the WebApplicationDesigner in 3.5 or 7.0 it doesn`t matter....
If I open a query with BEX and go to customize mode of the query --> the querydesigner will be open correctly --> very strange!
Could anybody have a solution for this issue?
Kind regards
mrpynk
Edited by: mrpynk on May 4, 2009 11:22 AM -
Error while importing an RFC from R/3
Hello,
I am getting the following error while importing an RFC from an R/3 system in the Repository:
***Ready for import***
Import started...
/XXX/YYY_CREATE_NOTIFICATION:
+ com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: PERMISSION_ERROR
Import failed with 1 error
Does any one know what is required? Is it missign authorizations on the R/3 side or on the XI side?
Thank you,
Sumant.Hi,
please check your User (used for importing RFC) authorizations,
it should have RFC authorization .
Thanks,
Madhav
Note: Points If Useful. -
Hi All,
i have setup CHARM created a TR and task and assigned a correction to thes task, released the task and TR and while trying to import the the trequest to quality system (from solutionmanager) throwing an error"TMS Communication Error with [email protected]". opened the performance assisant of this error which displays "User SAPSYS has no RFC authorization for function
group TMSC "
rgds,
AnandDear Anand,
Please go to Tcode:SM59,select the [email protected] rfc under ABAP Connections and check for the connection test.
In the Log on tab(when you double click [email protected])check for the user which is mentioned there.
If you get same RFC error when you do the connection test,the proper RFC authorization should be given to the user mentione in the log on tab in the satellite system.
Revert for any clarifications,
Thanks and Regards,
Avinash. -
Error in Import Adaptive RFC Model
Hi SDN,
I am trying to develop an application using Import Adaptive RFC Model, while creating a model i could not able to connect to the backend system after giving the single server parameters. When i click on the next button a pop up is displayed with an error message *"User Name or Password wrong" *.
But i could able to login to R/3 with the same userid and password from SAP logon pad.
Really i am at Six and Seven's to trace out this error. Please suggest me how to overcome this error and create the model succesfully.
Regards
BashaHi Praveen & Chaitanya
Thanks for your quick response and informative threads.
Actually in order to import an adaptive rfc model
I have right clicked the model node to create a model and given the model name,package name,model data and metadata names and clicked next button. Then in the next screen
Tab Strip -> Single Server:
Host name :
System Number :
client details:
Tab Strip -> Load balancing:
System :
Message Server:
System Name:
Group:
(in Tcode: SLMG i have added the group public also)
client details:
After entering the required details either in Single Server or Load balancing and clicked the next button I could not able estabilish a connection to the backend R/3 and get the list of Bapi's or RFc's. Instead i am getting a pop up message "User Name or Password Wrong". I could not able to proceed from here.
But with the same above parameters i could able to logon to R/3 from SAP Logon Pad. I have tried by giving the user name in Cap's and small letters but no use.
As i was strucked at the intial step while creating the model but not during the execution of the program, as far as my knowledge is concerned i think we no need to worry on SLD or JCO connections during the creation of the model. Please correct me if i am wrong and suggest me to rectify the error.
Regards
Basha -
hello
I am trying to import an RFC and recieve this error.
You cannot create new objects since the system is not the original system of the software component version
any ideas?
KfirREFRESH THE CACHE AND IT WORKED
-
RFC Error While Invoking A Remote Function Module.
I am invoking A remote function module while invoking it get an exception when i see the error logs
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Screen output without connection to user. , error key: RFC_ERROR_SYSTEM_FAILURE at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101) at... [see details]
can anyone pls tell me what the error is..
regards
Nilesh Taunk.Hi Nilesh Taunk,
You can go through the following steps
-o JCO Exceptions 1. http://help.sap.com/saphelp_nw04s/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
-o JCO Exceptions 2. http://help.sap.com/saphelp_nw04/helpdata/en/f6/e002416225f023e10000000a155106/frameset.htm
-o Restart of the J2EE instance and try re-importing the RFC model. Sometimes it helps.
-o Logon into WebDynpro Content Administrator as a J2EE Admin and check if the JCO Connections and User /pwd of your application is correct. You can <b>ping </b>or <b>test your JCO connections</b>. if something is wrong, enter the values again for JCO n retest them.
-o Try undeploying or removing the complete application and redeploy it.
Tu undeploy please go to
Go to <b>Visual Admin -> Server -> Services -> Deploy ->
</b>
Under Runtime Tab
select the server, open the tree , you would find the webdypro list there.
Now select an application, first stop it, remove it and redeploy if necessary.
Let us know if you could solve the problem or not, gud luck!
Rgds,
Sreenivas. -
RFC error when trying to add transport request in queue in STMS..
Hi,
When I try to add a Transport request in queue in STMS transaction. I get RFC error saying some problem with tp program.
But when I go and check the RFC connection through STMS in system overview -> Communication -> RFC setting, it says RFC connection Ok.
What may be the issue ? I really need some light on this..
Regards,
Rajesh.Hi Rajesh,
At times when u try to add the TR to a queue there would be 2 reasons.
1. If u have imported a TR into a system say QTY and it needs to be re imported, then we delete it fromthe STMS queue and add it again to re import it.
2. If u have some transport from external sap system to be imported here we place the data and Co files in the trans directory and then add the TR to this queue.
A TP failure happens if the data and co files does not exist in the TP directory or else, the TR target system is incorrectly mentioned.
Hope it helps.
Br,
Sri
Award points for helpful answers -
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
I am having this error pop up very frequently on some new SAP systems. This will randomly happen and keep us from being able to release transports and import them in STMS. I receive the following error:
There was an attempt to start the transport control program tp using the local RFC interface.
An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
- When I check the Transport Tool (STMS: import queue> check> transport tool) I get the following information:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
out during connection setup (check that partner exists
- When checking the TP System Log I receive the same error. The RSTPTEST report does not give any additional information. SM21 shows a warning and an error:
Warning:
Communication Error, CPIC return code 020, SAP Return code 456
Dialog Process No. 000
Problem cl: SAP web AS problem
Package: STSK
Further Details:
Module Name: thxxhead
Line: 7488
Error Text: 020456
Caller: ThRecei
Error:
Problem cl: transaction problem
Package: STTO
All of these errors are only pointing to a time out. I cannot figure out why this is happening. I checked the TMS RFC connection in SM59 and they are fine. I have been able to work around this issue in 2 different ways. First, I can delete the files in the "\trans\tmp" directory on the server. Sometimes this resolves the error. Else I have to restart the system.
I need to understand where this issue is coming from and how to resolve it. It is becoming more and more frequent. Thank you for your help!Hi,
i have had similar issues during this week. After looking for a solution everywhere i found out that i didn't set up the FQDN on this system.
Symptoms were:
se38 > RSTPTEST timed out sometimes(not always)
sm59 > TCP/IP connections > CALLTP_WindowsNT > test connections timed out sometimes (again, not always)
STMS Overview > Systems: I was not always able to distribute and activate configuration from the Domain controller via Extras > Distribute and Activate Configuration (it died on the mentioned system)
Transports failed mostly with the same error.
The error log was somewhere deep in ST11. It could not resolve our FQDN.
The solution, for me, was to add our FQDN to the WINDIR\System32\drivers\etc\hosts file.
We upgraded the kernel as well (from 7.20 patch 046 to most current) but this didn't help.
The FQDN is a concatenation of computer name and dns suffix of the network (if you have none, you can add one via rightclick on the used network adapter>ipv4>properties>Advanced>DNS tab, so in the end the host file looked like
127.0.0.1 localhost computer-name.ourSuffix.com
After this line has been added, the error stopped and the transports work again.
I hope it helps. Good luck. -
Error " RFC Status :- Lock table overflow "in event trace ( SWEL )
Hi experts ,
I will not mention this post as URGENT but you guys can understand the importance as I am in PRD Support of my workflows .
My Workflow is throughing error in SWEL , as below and after error its getting deactivated .
The workflow is triigering based on the BO : DRAW and event CREATED .
Error : RFC Status Lock table overflow
In feedback after error the message is : A system error has occurred in lock management .
I have resolved the deactivation problem after error , but can any body please suggest me what is the root cause of this error , so that i can try to avoid that error .
Regards
Prabhudutta
Edited by: Prabhudutta Behera on Nov 20, 2008 5:58 AMThis error I have not faced. i will suggest you to check SWU3 transaction Code and check everything is configured. Also check SM12 and SM58. Also I will ask you to contact the Basis Guys related to this issue. Also check WF-BATCH is having all the authorization required. Try to replicate this from the system where Workflow is working.
Thanks
Arghadip -
Jco error RFC adapter field PT F not defined
Hi Experts,
I am in a strange situation as I have become clue less on this issue
It is a file to XI to RFC scenario.. runs fine in dev environment
When I change the parameters in teh rfc communication channel to point to QAS it throws
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling Z_TRAX_PO_CHG_IV in remote system (RfcClient[CC_QAS]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Field selection PT F not defined:
There is no such field as PT F and besides the version of the bapi in QAS is in sync with the dev..
pls help me ou ton this
Edited by: Ravindra Teja on Feb 27, 2011 8:45 AMHi,
First of all, can you please elaborate what you want?
secondly, why don't you transport your developments to QAS?
Third, what is the reason behind changing the receiver RFC adapter parameter to QAS?
4th, do you want to post data to QAS, if yes, did you transported the RFC to QAS ? Please re import the rfc to your swcv from QAS system.
Please check communication channel if you getting any error?
Regards
Aashish Sinha -
TMS_TM_GET_TRLIST and RFC error
Hello,
I am having problem with RFC call to TMS_TM_GET_TRLIST. Since this function is not remote enabled, I copied it and made it remote enabled. Function works well from SAP but when I call it from PHP, I get:
Errors found during saprfc calls:
RFC Error Info :
Key :
Status : EXCEPTION ALERT RAISED
Message :
Internal:
How can I debug this exception and what causes it? Can this be resolved?Hi everyone,
Eduard,
I tried to do what you suggested. I will include output below. However I think this alert is raised because of missing export parameter which is not found during function discover. The parameter I am talking about is export ET_TMSTPALOG and it has following metadata, which can be checked in SE37:
ET_TMSTPALOG
LISTNAME CHARACTER 40
TRTIME NUMC 14
TRKORR CHARACTER 20
TRCLI CHARACTER 3
TRSTEP CHARACTER 1
ALLCLI CHARACTER 1
TRFUNCTION CHARACTER 1
KORRDEV CHARACTER 4
PROJECT CHARACTER 20
TRUSER CHARACTER 12
RETCODE CHARACTER 4
ADMIN CHARACTER 12
AS4TEXT CHARACTER 60
LINENR CHARACTER 10
I added this manually with saprfc_function_define but then after a call I get RFC error again.
Debug info before and after call is displayed below:
--- BEFORE CALL ---
--- saprfc_function_debug_info(Resource id #8) --->
Function module: Z_TMS_TM_GET_TRLIST (remote SAP R/3: 40B)
IMPORT
IV_ALLCLI C 1 0 offset = 0
IV_DOMAIN C 10 0 offset = 0
IV_ENDDATE D 8 0 offset = 0
IV_ENDTIME T 6 0 offset = 0
IV_EXPORTS C 1 0 offset = 0
IV_GET_LINENR C 1 0 offset = 0
IV_IMPORTS C 1 0 offset = 0
IV_LAST_IMPORT C 1 0 offset = 0
IV_LATEST C 1 0 offset = 0
IV_LISTNAME C 40 0 offset = 0
IV_PROJECT C 20 0 offset = 0
IV_STARTDATE D 8 0 offset = 0
IV_STARTTIME T 6 0 offset = 0
IV_SYSTEM C 10 0 offset = 0
IV_TPSTAT_KEY C 20 0 offset = 0
IV_TRCLI C 3 0 offset = 0
IV_TRFUNCTION C 1 0 offset = 0
IV_TRSTEPS C 30 0 offset = 0
EXPORT
ES_EXCEPTION ID C 32 0 offset = 0
DOMNAM C 10 0 offset = 32
SYSNAM C 10 0 offset = 42
CLIENT C 3 0 offset = 52
SERVICE C 10 0 offset = 55
FUNCTION C 30 0 offset = 65
ERROR C 30 0 offset = 95
SEVERITY C 1 0 offset = 125
TEXT C 100 0 offset = 126
MSGID C 20 0 offset = 226
MSGTY C 1 0 offset = 246
MSGNO N 3 0 offset = 247
MSGV1 C 50 0 offset = 250
MSGV2 C 50 0 offset = 300
MSGV3 C 50 0 offset = 350
MSGV4 C 50 0 offset = 400
METHODPTR C 32 0 offset = 450
ET_TMSTPALOG LISTNAME C 40 0 offset = 0
TRTIME N 14 0 offset = 40
TRKORR C 20 0 offset = 54
TRCLI C 3 0 offset = 74
TRSTEP C 1 0 offset = 77
ALLCLI C 1 0 offset = 78
TRFUNCTION C 1 0 offset = 79
KORRDEV C 4 0 offset = 80
PROJECT C 20 0 offset = 84
TRUSER C 12 0 offset = 104
RETCODE C 4 0 offset = 116
ADMIN C 12 0 offset = 120
AS4TEXT C 60 0 offset = 132
LINENR C 10 0 offset = 192
EV_SERVICE_VERS C 10 0 offset = 0
TABLE
IRT_REQUESTS SIGN C 1 0 offset = 0
OPTION C 2 0 offset = 1
LOW C 20 0 offset = 3
HIGH C 20 0 offset = 23
Value of import (input) parameter IV_ALLCLI (memory = 1):
"X"
Value of import (input) parameter IV_DOMAIN (memory = 10):
Value of import (input) parameter IV_ENDDATE (memory = 8):
"31012007"
Value of import (input) parameter IV_ENDTIME (memory = 6):
"000000"
Value of import (input) parameter IV_EXPORTS (memory = 1):
Value of import (input) parameter IV_GET_LINENR (memory = 1):
Value of import (input) parameter IV_IMPORTS (memory = 1):
"X"
Value of import (input) parameter IV_LAST_IMPORT (memory = 1):
Value of import (input) parameter IV_LATEST (memory = 1):
Value of import (input) parameter IV_LISTNAME (memory = 40):
Value of import (input) parameter IV_PROJECT (memory = 20):
Value of import (input) parameter IV_STARTDATE (memory = 8):
"01012007"
Value of import (input) parameter IV_STARTTIME (memory = 6):
"000000"
Value of import (input) parameter IV_SYSTEM (memory = 10):
"B10"
Value of import (input) parameter IV_TPSTAT_KEY (memory = 20):
Value of import (input) parameter IV_TRCLI (memory = 3):
Value of import (input) parameter IV_TRFUNCTION (memory = 1):
Value of import (input) parameter IV_TRSTEPS (memory = 30):
Value of export (output) parameter ES_EXCEPTION (memory = 488):
ID DOMNAM SYSNAM CLIENT SERVICE FUNCTION ERROR SEVERITY TEXT MSGID MSGTY MSGNO MSGV1 MSGV2 MSGV3 MSGV4 METHODPTR
"" "" "" "" "" "" "" "" "" "" "" "0" "" "" "" "" ""
Value of export (output) parameter ET_TMSTPALOG (memory = 208):
LISTNAME TRTIME TRKORR TRCLI TRSTEP ALLCLI TRFUNCTION KORRDEV PROJECT TRUSER RETCODE ADMIN AS4TEXT LINENR
"" "0" "" "" "" "" "" "" "" "" "" "" "" ""
Value of export (output) parameter EV_SERVICE_VERS (memory = 10):
Internal table IRT_REQUESTS (memory = 48):
SIGN OPTION LOW HIGH
0 rows
--- AFTER CALL ---
RFC Error Info :
Key :
Status : EXCEPTION SYSTEM_FAILURE RAISED
Message :
Internal:
--- saprfc_function_debug_info(Resource id #8) --->
Function module: Z_TMS_TM_GET_TRLIST (remote SAP R/3: 40B)
IMPORT
IV_ALLCLI C 1 0 offset = 0
IV_DOMAIN C 10 0 offset = 0
IV_ENDDATE D 8 0 offset = 0
IV_ENDTIME T 6 0 offset = 0
IV_EXPORTS C 1 0 offset = 0
IV_GET_LINENR C 1 0 offset = 0
IV_IMPORTS C 1 0 offset = 0
IV_LAST_IMPORT C 1 0 offset = 0
IV_LATEST C 1 0 offset = 0
IV_LISTNAME C 40 0 offset = 0
IV_PROJECT C 20 0 offset = 0
IV_STARTDATE D 8 0 offset = 0
IV_STARTTIME T 6 0 offset = 0
IV_SYSTEM C 10 0 offset = 0
IV_TPSTAT_KEY C 20 0 offset = 0
IV_TRCLI C 3 0 offset = 0
IV_TRFUNCTION C 1 0 offset = 0
IV_TRSTEPS C 30 0 offset = 0
EXPORT
ES_EXCEPTION ID C 32 0 offset = 0
DOMNAM C 10 0 offset = 32
SYSNAM C 10 0 offset = 42
CLIENT C 3 0 offset = 52
SERVICE C 10 0 offset = 55
FUNCTION C 30 0 offset = 65
ERROR C 30 0 offset = 95
SEVERITY C 1 0 offset = 125
TEXT C 100 0 offset = 126
MSGID C 20 0 offset = 226
MSGTY C 1 0 offset = 246
MSGNO N 3 0 offset = 247
MSGV1 C 50 0 offset = 250
MSGV2 C 50 0 offset = 300
MSGV3 C 50 0 offset = 350
MSGV4 C 50 0 offset = 400
METHODPTR C 32 0 offset = 450
ET_TMSTPALOG LISTNAME C 40 0 offset = 0
TRTIME N 14 0 offset = 40
TRKORR C 20 0 offset = 54
TRCLI C 3 0 offset = 74
TRSTEP C 1 0 offset = 77
ALLCLI C 1 0 offset = 78
TRFUNCTION C 1 0 offset = 79
KORRDEV C 4 0 offset = 80
PROJECT C 20 0 offset = 84
TRUSER C 12 0 offset = 104
RETCODE C 4 0 offset = 116
ADMIN C 12 0 offset = 120
AS4TEXT C 60 0 offset = 132
LINENR C 10 0 offset = 192
EV_SERVICE_VERS C 10 0 offset = 0
TABLE
IRT_REQUESTS SIGN C 1 0 offset = 0
OPTION C 2 0 offset = 1
LOW C 20 0 offset = 3
HIGH C 20 0 offset = 23
Value of import (input) parameter IV_ALLCLI (memory = 1):
Value of import (input) parameter IV_DOMAIN (memory = 10):
Value of import (input) parameter IV_ENDDATE (memory = 8):
"00000000"
Value of import (input) parameter IV_ENDTIME (memory = 6):
"000000"
Value of import (input) parameter IV_EXPORTS (memory = 1):
Value of import (input) parameter IV_GET_LINENR (memory = 1):
Value of import (input) parameter IV_IMPORTS (memory = 1):
Value of import (input) parameter IV_LAST_IMPORT (memory = 1):
Value of import (input) parameter IV_LATEST (memory = 1):
Value of import (input) parameter IV_LISTNAME (memory = 40):
Value of import (input) parameter IV_PROJECT (memory = 20):
Value of import (input) parameter IV_STARTDATE (memory = 8):
"00000000"
Value of import (input) parameter IV_STARTTIME (memory = 6):
"000000"
Value of import (input) parameter IV_SYSTEM (memory = 10):
Value of import (input) parameter IV_TPSTAT_KEY (memory = 20):
Value of import (input) parameter IV_TRCLI (memory = 3):
Value of import (input) parameter IV_TRFUNCTION (memory = 1):
Value of import (input) parameter IV_TRSTEPS (memory = 30):
Value of export (output) parameter ES_EXCEPTION (memory = 488):
ID DOMNAM SYSNAM CLIENT SERVICE FUNCTION ERROR SEVERITY TEXT MSGID MSGTY MSGNO MSGV1 MSGV2 MSGV3 MSGV4 METHODPTR
"" "" "" "" "" "" "OK" "" "" "" "" "0" "" "" "" "" ""
Value of export (output) parameter ET_TMSTPALOG (memory = 208):
LISTNAME TRTIME TRKORR TRCLI TRSTEP ALLCLI TRFUNCTION KORRDEV PROJECT TRUSER RETCODE ADMIN AS4TEXT LINENR
"" "0" "" "" "" "" "" "" "" "" "" "" "" ""
Value of export (output) parameter EV_SERVICE_VERS (memory = 10):
Internal table IRT_REQUESTS (memory = 48):
SIGN OPTION LOW HIGH
0 rows
Maybe you are looking for
-
Someone is purchasing games from my account yet I have no monies in the account to purchase anything nor do I use a charge card ...what is happening and cs an I resolve the issue...
-
VF01 Issue: no accounting document generated
Dears, While Billing the Down Payment (VF01) in ETO case of IDES, the system issued a message: no accounting document generated. So the payment data can not be updated. Does anyone know how to solve this problem? Thx!
-
How do I get CS3 to work in this system?
-
Ora-03135 not in alertlog?
Oracle Version: 10.2.0.4 OS: RedHat 5.5 Hi all, recently we had a problem with a delete statement, that was triggered by a JBoss Server. This statement didn't finish, so I started tracing it as I couldn't find any ora- in the alert log. But funnily e
-
Recommendations for laptop coolers?
Any recommendations for laptop coolers? I'm thinking aluminum, largest fans possible and I want it as large as the footprint of the MBP 15" (no little postage stamp sized units). I was considering the Startech NBCOOLERPRO. Opinions?