Import Error when using Apple Lossless

Thanks to all in advance for their help. I have iTunes l0.1.1.4 running on several Windows 7 computers and am currently getting an error when I try to import a CD using ALC.
The error message says "Error occurred while converting the file "Song name". An unknown error occurred (-39)."
This also happens when I try to convert to using AAC. But as an experiment, I was able to import using either WAV or AIFF formats. I also can play CDs directly so I would assume hardware isn't the fault.
I do have another computer running XP and iTunes 10.1.1.4 and am able to import using ALC so my guess is there's something between iTunes and Windows 7 that's causing the issue.
Again, thank you in advance for any guidance and apologies if this has been covered in another string.

I think I may have stumbled onto my own solution. On the WinXP machine that was letting me import ALC successfully, I had my C:drive set as the destination for the import files. I changed that setting to a Network Attached Storage (NAS) device and suddenly could no longer import using ALC. I reset back to the C:drive and it worked, confirming that the conflict was between iTunes and the NAS or my Network.
I then reset the destination on my Win7 machine to also use a folder on the c:drive as the file destination and that solved in there as well.
So, if anyone can shed light on why importing/compressing to ALC/sending to a non-c:drive location is causing a failure, I'm listening.
And hopefully this solution will help someone else along the way.

Similar Messages

Can't Import Songs To iTunes Using Apple Lossless Encoder

I have about 4,000 songs in FLAC format (which is a lossless format) on my external hard drive. I want to import them into iTunes using the Apple Lossless Encoder. I called Apple support and asked them how to do this, and they told me to go under "Preferences" in iTunes and chose to import using Apple Lossless Encoder.
I did this using Preferences>General>Import Settings, and then went to File>Add Folder to Library, however, it still imported my songs as AAC Audio Files. Does anyone know what I'm doing wrong? Thanks.

iTunes cannot read nor import FLAC files - not without third-party plugins, anyway, and I don't know of any that will allow iTunes to convert a FLAC file to another format - so I'm a bit confused as to the procedure you're following. If all you're doing is using the Add to Library command and choosing the FLAC files, it's quite possible that iTunes is misinterpreting the format and adding what is in reality an invalid link with erroneous format information.
If you have some sort of third-party plugin for FLAC for iTunes, please post that information and perhaps someone here can determine whether iTunes can do a conversion successfully.

I'm getting a error message when using Apple Configurator "unable to send ClearPasscode command to device"

I'm getting a error message when using Apple Configurator "unable to send ClearPasscode command to device"

Yes, that is correct. My spreadsheet has the following information in those cells if you want to compare yours on Monday:
Product Type
Application
|
AdamId:
<and a 9 digit number>
I ended up bringing the Macbook Pro home with me after struggling with it for a half hour at the end of a long day. I called and within 5 minutes the problem was corrected. The technician said they were getting calls all day.

Error when used hana studio to import Delivery Unit

HANA version:1.00.80.00.391861
HANA studio version:1.80.3
Plantform :SUSE Linux Enterprise Server 11.2
I meet a error when used hana studio followed that steps to import Delivery Unit:
Launch HANA Studio
Select your HANA instance
On the Quick launch page, choose Content -> Import
Now Select HANA Content -> Delivery unit.
Choose Next
Select the server, browse the Service DU (Service DU on server: SYS/global/hdb/content): HCO_INA_SERVICE.tgz
Who can help me what shoud i do.
thanks.

I has Resolved.
You must set the OS directory privileges which has listed on the picutre to 777 by 'chmod' command ,
if it's 775 or others.

Error When Using Class :(

Hey,
Class:
package
    import flash.display.MovieClip;
    import flash.events.Event;
    public class Main extends MovieClip
        public var enemyA:Array = [];
        public var birdA:Array = [];
        public var rowNum:int = 2;
        private var gap:int = 100;
        private var obj_no = 2;
        public var enemy1:mychar = new mychar();
        public var TheBird:BirdChar = new BirdChar();
        public function Main()
            // constructor code
            createEnemyF();
            createBirdF();
            this.addEventListener(Event.ENTER_FRAME,loopF);
        public function createEnemyF()
            for (var i:int = 0; i < rowNum; i++)
                for (var j:int = 0; j < obj_no; j++)
                    enemy1.x = Math.random() * stage.stageWidth - enemy1.width;
                    enemy1.y = - i * (gap + enemy1.height) - 30.65;
                    enemyA.push(enemy1);
                    addChild(enemy1);
        public function createBirdF() {
            TheBird.x = 270.95;
            TheBird.y = 350.95;
            birdA.push(TheBird);
            addChild(TheBird);
        public function loopF(event:Event) {
            updateEnemyPositionsF();
            updateBirdPositionsF();
            hitTestF();
        public function updateEnemyPositionsF() {
            enemy1.y += 2;
        public function updateBirdPositionsF() {
            TheBird.x = mouseX;
        public function hitTestF() {
            if(TheBird.hitTestObject(enemy1))
                gotoAndPlay(5);
                trace('The Bird Hit Enemy 1');
This conflicts and causes this error:
1046: Type was not found or was not a compile-time constant: MouseEvent
^ ^ Code repeats to all of my event listeners
Thanks for your time.

Thanks, i thought it might be this because of previous problems but i seen i already had : import flash.events.Event; so i thought that would be OK!
Second Error:
1180: Call to an undefined method Timer.
I think this is the same sort of thing but what to import to fix this?
So far these are my imports:
    import flash.display.MovieClip;
    import flash.events.Event;
    import flash.events.MouseEvent;
    import flash.events.TimerEvent;
Thanks for helping.
Date: Thu, 3 Nov 2011 05:36:22 -0600
From: [email protected]
To: [email protected]
Subject: Error When Using Class
    Re: Error When Using Class
    created by markerline in Flash Pro - General - View the full discussion
Looks like you imported events.Event but not events.MouseEvent (or some similar syntax) basically you must import MouseEvents separately from other Events.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4005227#4005227
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4005227#4005227. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Flash Pro - General by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Any solution for 4280 error when using Itunes to burn CDs?

Any solution for 4280 error when using Itunes to burn CDs?

http://support.apple.com/kb/TA38101?viewlocale=en_US

Photoshop CS4 "Program Error" when using Text tool

Hello. I was having problems with Photoshop displaying a "Program Error" every so often, so I deleted the preference file and all seemed good. But after deleting the preference file for my Photoshop CS4 and re-launching Photoshop, the text tool causes Photoshop to display a Program Error when using the tool. It never did this before. Should I reinstall Photoshop? I am using a Powermac G5 running 10.5.8. I have already tried repairing the disk permissions.
Thanks

Thats kinda what I thought too, but the problem started happening randomly. It started when we were trying to use photomerge with large photos. The program just started giving the program errors. I still think it may be a font problem, but without going through my 2000+ fonts and disabling them one by one, how can I resolve this issue?
Thanks

I have a Mac Pro using OSX 10.7.4. When using apple mail I click on the address icon to obtain email address and nothing happens. I've restarted both the application and the Mac but still won't open address book. Any ideas please.

I have a Mac Pro using OSX 10.7.4. When using apple mail I click on the address icon to obtain email address and nothing happens. I've restarted both the application and the Mac but still won't open address book. Any ideas please.

Assuming you have these accounts set up in Mail, open preferences and under Accounts tab, edit the SMTP outgoing server list. Do you have a .mac address in the list? If so, delete it.
Are you using iCloud?
For the troubled account, select the correct SMTP server for that account in the box and check the box to use only that server with that account.

Has anyone experienced the loss of audio when using Apple TV when it has been working fine?

I can't get any audio through my reciever when using Apple TV. It's been working fine until a week ago. I've check my reciever, unplug the TV, and Apple TV as described but nothing. I switch to my Direct TV input and I can get audio when not using ATV. I've tried most everything I've read on blogs but nothing. One of those "pull your hair out" issues. Any direction would be appreciated. Thanks, Vince

Hi there Vfall!
I have some information for you that can help you troubleshoot this issue:
If you can see video but can't hear sound
If Apple TV is connected to a receiver, make sure the receiver is turned on.
Make sure the input setting you've selected on your receiver matches the input you have your audio cables connected to. See the documentation that came with your receiver for more information.
Make sure the volume on your TV or receiver is turned up and isn't muted.
Check whether you can hear sound while playing video only. Also, check whether you can hear audio feedback while clicking through menu options.
If you're connected to the HDMI port on your TV and Apple TV, make sure your TV supports audio through its HDMI port. The HDMI ports on some older TVs support only video.
If you are using HDMI audio, try disconnecting and reconnecting the HDMI cable.
If you're connected to the HDMI port on your TV and Apple TV, make sure your TV is setup to receive audio from HDMI. For some TV's this is automatic, but for others there is a choice between digital and analog (for HDMI audio, choose digital). Read more about HDMI audio.
Try the other audio outputs on Apple TV to see if they work.
If possible, try using different audio cables.
This information is taken from the following article:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Error when using PPR in the OA page developed.

HI,
We are encountering an error when using PPR for the custom OA page being developed. I am using JDeveloper version 9.0.3.5(Build 1437) and Oracle Applications version 11.5.10.CU2. The scenario we are using PPR and the steps to reproduce the issue is mentioned below,
Scenario:
1) PPR is enabled for a custom OA page that is developed.
2) The PPR is being used to enable or disable a particular field based on the
selection of a value in a poplist in the same OA Page.
Error replication steps:
1) The user enters a value in the primary mandatory field which has to have
unique value.
2) The user selects a value from the poplist of a field which has PPR associated.
3) The user enters data in all other mandatory fields in the OA page except one
and tries to save the form and is shown a error message saying that all
mandatory fields are not entered(This is correct). Now the page gets
automatically refreshed and so the entered values are wiped off.
4) Now if the user again enters a value in the primary mandatory field (as in
step1) and if that value happens to be already existing value and then select
a value from the poplist which has PPR enabled then immediately the error
"Please enter a unique value" is entered, though we did not save the record.
The unique record validation would happen only at the time of saving the
record as per out business logic.
5) But if in Step 4 if i had entered a unique value again then the above said error
does not happen. There are few more similar kind of issues happening in the
same page because PPR is enabled.
Please note that this issue happens only when the page is deployed in a oracle
applications instance and not in JDeveloper.
Would this issue because of some cacheing problem? If Yes then how do we resolve it? Or would it be some other problem caused by our internal coding.
Any inputs for resolving this issue would be highly appreciated.
Thanks, Raja.

What works in Jdeveloper should work when deployed in iAS as well.
And PPR is an old feature given quite enough time to mature, so before we suspect OA we should investigate the code. What I do not understand is how the page refreshes in Step 3 and why does the user have to re-enter the fields just because he missed entering one mandatory field the last time.
Mandatory field validations are client validations set by making the fields 'Required'. You obviously have client validations turned off on your PPR, otherwise you would be stuck with a javascript popup on PPR. The only way you can get the "Please enter unique..." error on PPR is Server Validation. So where have you placed this validation? If it is not in the EO, is it in the AM? And are you unconditionally calling the AM validation method in your processFormRequest? The PPR will also go through processFormRequest so I hope the PPR event is in a different if-else block.

Java Heap Error when using Stateless Session Timer Bean deployed in Oracle

Hi,
Am getting following Java Heap Error when using Stateless Session Timer Bean deployed in Oracle 10g AS R3 (Oracle Containers for J2EE 10g (10.1.3.0.0) (build 060119.1546.05277) ):
06/08/02 14:58:43 javax.ejb.EJBException: java.lang.OutOfMemoryError: Java heap space
06/08/02 14:58:43 at com.evermind.server.ejb.EJBUtils.getLocalUserException(EJBUtils.java:304)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.system.AbstractTxInterceptor.convertAndHandleMethodException(AbstractTxInterceptor.java:67)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:45)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
06/08/02 14:58:43 at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:86)
06/08/02 14:58:43 at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:71)
06/08/02 14:58:43 at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1624)
06/08/02 14:58:43 at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:92)
06/08/02 14:58:43 at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:184)
06/08/02 14:58:43 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819)
06/08/02 14:58:43 at java.lang.Thread.run(Thread.java:595)
06/08/02 14:58:43 Caused by: java.lang.OutOfMemoryError: Java heap space
I had tried using -Xms / -Xmx options (upto 1 GB).
The trace of exception gets delayed (from being displayed on the console) as the memory size is increased; but after sometime it starts getting displayed on the console.
Even though this exception is displayed on the console, the Timer Bean continues to execute upto sometime before it finally crashes!
If anyone has encountered such problem; would appreciate if you could share the solution.
Regards, Vidyadhar

Hi guys, I have the same problem. I have an application EAR file with two modules (EJB and WAR starting in this order). The application can schedule a process via EJB timer. In this case restarting the server I receive the error above. If I change the modules start order --> WAR - EJB the server start correctly, but the application scheduler fails (the persistency is not working) with this error:
07/10/09 10:30:54 FINISSIMO: TimerTask.runBeanTimer java.lang.NullPointerException; nested exception is: java.lang.NullPointerExceptionjavax.ejb.TransactionRolledbackLocalException: java.lang.NullPointerException; nested exception is: java.lang.NullPointerException
java.lang.NullPointerException
     at java.util.ListResourceBundle.handleGetObject(ListResourceBundle.java:107)
     at java.util.ResourceBundle.getObject(ResourceBundle.java:319)
     at java.util.ResourceBundle.getString(ResourceBundle.java:285)
     at java.util.logging.Formatter.formatMessage(Formatter.java:108)
     at oracle.j2ee.util.TraceLogFormatter.format(TraceLogger.java:124)
     at oracle.j2ee.util.TraceLogger$TraceLoggerHandler.publish(TraceLogger.java:105)
     at java.util.logging.Logger.log(Logger.java:428)
     at java.util.logging.Logger.doLog(Logger.java:450)
     at java.util.logging.Logger.log(Logger.java:539)
     at oracle.ias.container.timer.TimerEntry.readObjFromBytes(TimerEntry.java:308)
     at oracle.ias.container.timer.TimerEntry.getInfo(TimerEntry.java:107)
     at oracle.ias.container.timer.Timer.getInfo(Timer.java:367)
     at oracle.ias.container.timer.EJBTimerImpl.getInfo(EJBTimerImpl.java:89)
     at com.finantix.foundation.integration.ejbtimer.EJBTimerServiceExecutorBean.ejbTimeout(EJBTimerServiceExecutorBean.java:42)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBTimeoutJoinPoint.invoke(EJBTimeoutJoinPoint.java:20)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:38)
     at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1714)
     at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:106)
     at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:220)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
javax.ejb.TransactionRolledbackLocalException: java.lang.NullPointerException; nested exception is: java.lang.NullPointerException
     at com.evermind.server.ejb.EJBUtils.getLocalUserException(EJBUtils.java:309)
     at com.evermind.server.ejb.interceptor.system.AbstractTxInterceptor.convertAndHandleMethodException(AbstractTxInterceptor.java:73)
     at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:55)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:38)
     at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1714)
     at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:106)
     at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:220)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
     at java.util.ListResourceBundle.handleGetObject(ListResourceBundle.java:107)
     at java.util.ResourceBundle.getObject(ResourceBundle.java:319)
     at java.util.ResourceBundle.getString(ResourceBundle.java:285)
     at java.util.logging.Formatter.formatMessage(Formatter.java:108)
     at oracle.j2ee.util.TraceLogFormatter.format(TraceLogger.java:124)
     at oracle.j2ee.util.TraceLogger$TraceLoggerHandler.publish(TraceLogger.java:105)
     at java.util.logging.Logger.log(Logger.java:428)
     at java.util.logging.Logger.doLog(Logger.java:450)
     at java.util.logging.Logger.log(Logger.java:539)
     at oracle.ias.container.timer.TimerEntry.readObjFromBytes(TimerEntry.java:308)
     at oracle.ias.container.timer.TimerEntry.getInfo(TimerEntry.java:107)
     at oracle.ias.container.timer.Timer.getInfo(Timer.java:367)
     at oracle.ias.container.timer.EJBTimerImpl.getInfo(EJBTimerImpl.java:89)
     at com.finantix.foundation.integration.ejbtimer.EJBTimerServiceExecutorBean.ejbTimeout(EJBTimerServiceExecutorBean.java:42)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBTimeoutJoinPoint.invoke(EJBTimeoutJoinPoint.java:20)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
     ... 9 more
Any idea?
Thx Auro

When using apple remote app on ipad or iphone to control apple TV is there a way of selecting different airplay speakers?

When using apple remote on ipdad or iphone to control apple TV is there a way to select different airplay speakers without having to control the menu on screen. Eg I want to listed to my music through apple tv (which is in the living room) and beam it to my airplay speakers in my bedroom, at the moment I would have to go back into the living room to see my tv screen to select the bedroom airplay speakers, then go back upstairs to listen to the music. YOu should be able to select the speakers in app without looking at the TV screen. Hopefully that makes sense!?!

Look at this.
Tango Remote Control for iOS6-7 on the App Store on iTunes

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Have no idea of what you were even doing in Photoshop my crystal ball is out for repairs so I can not see.

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

UDESEncrypt Errors when using the JAVA engine (NW IDM 7.0)

Folks,
I'm seeing an error when I use the uDESEncrypt function with the Java Engine in NW IDM SP2 Patch 3.
The error I am getting is:
runFunctionsInString($FUNCTION.encrPWD()$$) got exception
org.mozilla.javascript.EvaluatorException: uDESEncrypt: Key should be exactly 24 bytes long.
The code calling it is:
// Main function: encrPWD
function encrPWD(Par){
     //Example calling DSE internal function
     //UserFunc.uStop("Terminated by user");
     key = "C:\Program Files\SAP\IdM\Workflow\configs\KEY\keys.ini";
     OutString = UserFunc.uDESEncrypt(key, Par);
     return OutString;
I have also seen this error when using Patch 4.
Interestingly enough, the error does not occur when using the Windows Engine. Anyone else seeing this?
Thanks,
Matt

Hi Matthew,
Try to replace the '\' with '
key = "C:
Program Files
SAP
IdM
Workflow
configs
KEY
keys.ini";
Alternative approaches,
1) setting key empty and it will look into %DSE_HOME%\KEY\key.ini
which should be C:\Program Files\SAP\IdM\Identity Center\Key\key.ini on default installation path.
2) or setting the key to something like = 6D5A2AF59B1CDD7F9592484F178331C891537A3F9B91D362
   a 24 byte key...
Also when using DES you should ensure that in Identity Center underneath Options/General
you have encryption algorithm set to 3DES.
Normally if you intend to use this for password provisioning in IC you would also
on the identity store (for instance 'Enterprise people') underneath 'password policy' check
of for 'enable password provisioning.'
By doing so the MX_ENCRYPTED_PASSWORD with be set when operating through
workflow (3DES encryption version of the MX_PASSWORD) which allows you to obtain password
when provisioning to other target systems...

Import Error when using Apple Lossless

Similar Messages

Maybe you are looking for