Import errors using TIFF, JPEG, BMP, PSD
I've been trying to import as assets or slideshows from Adobe Bridge (using CS2 as my main program) still images with the same message for 25% of the files, that being that Encore cannot decode the media, and perhaps you should find the proper decoder. For Christ sake. I'm using and Adobe product throughout the procedure.
The files are all 8 bit, with no layers, without imbedded file data.
It's like Encore 2.0 isn't talking with CS2 at all, or at least not all the time. Some files import fine, others simply will not.
I'm using the Nikon D2x camera and maybe there is a problem there??? Shouldn't be in my mind. Professionals use professional equipment!!!
I'm just about at my wit's end. I've a deadline here and Encore is proving to be a nightmare.
I've called tech support and they were no help at all. they did suggest converting to bitmap, and that works-- like I say -- all but 25% of the time still. What about my files are corrupted??
Computer is a 3.2 Ghz Intel Pentium 4 with 2 GBs of RAM, running Windows XP.
HELP!!
Though far too late for someone with a deadline almost a year ago, one thing that I have noticed when using PSD files in other Adobe Apps is that one should always Save w/ Max Compatibility checked, even though the files are a bit larger. I have all my copies of PS set to this, as the default, but had changed it on one (for some now unknown reason) and Save(ed) several PSDs. InDesign CS2 would not Place these files.
Another thing to look for is the excess baggage (Paths, Channels, etc.), that is necessary when working on the files in Photoshop. I always Save all of that material in my working folder, but then clean it up, when I do the final Save_As to the images folder for Import/Place into another app. I still have that material in the original working version, but do not include much of it, for final output. If I need it for Edit in Photoshop, I can always drag it in from the working version, and then Delete it, when the re-work is done.
I would have loved to hear the answer to Ruud's question from the OP, but assume that he/she found the difference, and just got too busy to share it.
As for the Nikon - should not be a problem. I shoot NEF (Nikon's RAW) and then, using ARC in PS CS2, Save_As PSD, when I have applied my settings and corrections. Never had a problem with this workflow. However, I do Image Size to whatever I will need in the other apps., so the files are no larger, than they will need to be.
Hunt
Similar Messages
-
I imported many files that were tiff & jpeg pairs (with the import preference box checked 'Do Not treat as seprate files when file names are the same') into LR3. Since then, i have been unable to write new metadata, such as captions, keywords, etc., to both the JPG and Tif files. LR3, and now also LR5 both only seem to want to write to the tiff files. How do i get the metadata easily saved onto the jeg files as well? (preferably without re-importing as separate files). Thank you.
To separate them:
0. Make sure the 'Treat JPEGs separately' box is ticked in Lr preferences, and
1. Invoke the 'Separate Jpegs from Raws' feature of RawPlusJpeg, *iff* it recognizes your tiffs as raw, or
2.1 Rename the jpegs temporarily (to an invalid extension), then resync the folder(s) (that will force Lr to forget about the sidecars).
2.2 Rename the jpegs back, and resync again, reimporting the jpegs.
That way, you won't need to re-import your tiffs, thus losing photo standing (e.g. collections, publish services, ... ) and edit-history...
Rob -
Lightroom 3.5 Import Errors using Synology NAS on Macbook
Hi all,
I've been trying out Lighroom 3.5 and I love it, with one exception....
When importing my archive (which is stored on a Synology Diskstation DS211j, accessed via an Airport Extreme), I get multiple import errors (around 5% of the total files), saying files are unreadable, unrecognisable etc. Some of the previews are also corrupt. I also get the "Server connection interupted" dialog in OS X Lion too, during the import. After Synchronizing the folder, it successfully imports more of the files yet still with a few errors. After the third or forth successive Sync, the operation is successful, with all files imported.
Now, this would point to a problem with my network connection or my NAS or its drives, however, this only happens with Lightroom. The files are not corrupt as they are imported sucessfully eventually. I work with the files outside of Lightroom all the time, and also stream my iTunes library sucessfully from the same drive, with no problems.
I have imported the same archive into Aperture, and encountered not a single read error or "Server connection interupted" dialog box.
Any ideas what is going on here?
Thanks,
John
MacBook Pro, Intel Core i7, 8GB RAM
OS X Lion 10.7.2I am having the same problem with my iPad and ios5 since I switched I have had the same issue. I am a wedding photographer so I transfer about 2000 raw images at a time. Also, is there a way to see a log of the old import problems. Once I close out the error window I can't seem to find a way to see what exact files it had problems with unless they haven't been imported to the catalog at all ever and I just do a reimport and skip duplicates. Sometimes it takes upwards of 5 times for those problematic files to be imported into LR just fine.
-
Language Import Error using Transaction SMLT - STRALAN_MSAG 075
Hi ,
My current client required Chinese Language - ZH (Chinese Simplified) in ECC 6.0 SR3 Unicode System
As per procedure, i have added chinese language 'ZH' using i18n -> i18n Customising -> i18n System Configuration menu.
Later in Transaction 'SMLT', i tried to add the language pack "ZHECC63F.PAT" by pasting & importing from EPS/in folder. The Import is getting terminated stating "Incorrect package format".
Kindly let me know what is the correct format. I have pasted the "ZHECC63F.PAT" file from the Language Installation DVD (51033496) delivered by SAP with license order.
SM37 gives the below message
Date Time Message text Message class Message no. Message ty
06.11.2008 17:06:56 Job started 00 516 S
06.11.2008 17:06:56 Step 001 started (program RSTLAN_IMPORT, variant &0000000000000, user ID KPITBASIS) 00 550 S
06.11.2008 17:06:56 Application log IHBD9Cot09hX08002aGV2W STRALAN_MSAG 109 I
06.11.2008 17:06:56 Restart import (state:lc_disassemble) STRALAN_MSAG 103 I
06.11.2008 17:06:56 ... system date: 06.11.2008 system time: 17:06:56 STRALAN_MSAG 363 I
06.11.2008 17:06:57 Step DISASSEMBLE ... STRALAN_MSAG 050 I
06.11.2008 17:06:57 ... system date: 06.11.2008 system time: 17:06:57 STRALAN_MSAG 363 I
06.11.2008 17:06:57 ... do not overwrite data files and cofiles (settings) STRALAN_MSAG 095 I
06.11.2008 17:06:57 Incorrect package format STRALAN_MSAG 075 E
06.11.2008 17:06:57 Job cancelled after system exception ERROR_MESSAGE 00 564 A
Action Log from SMLT givesbelow error
Start import (state:initial)
... system date: 06.11.2008 system time: 16:42:51
Version: 700.F.15
Step INIT ...
... system date: 06.11.2008 system time: 16:42:51
... configuration "Selective Language Import"
... executed successfully
Step DISASSEMBLE ...
... system date: 06.11.2008 system time: 16:42:52
... do not overwrite data files and cofiles (settings)
Incorrect package format
Restart import (state:lc_disassemble)
... system date: 06.11.2008 system time: 16:50:24
Step DISASSEMBLE ...
... system date: 06.11.2008 system time: 16:50:24
... do not overwrite data files and cofiles (settings)
Incorrect package format
Rgds
Ganesh.SHello Ganesh,
You need to restart the import by cancelling it and restarting it again from SMLT.
Just cancel the current import! And we would need to reimport the same with the correct patches!
Following OSS notes would provide you further insights:
Note 830722 - Current note for language transports in Release 7.0
Note 195442 - Language import and Support Packages
Note 48047 - Mode of operation of report RSREFILL
Thank You,
Antarpreet -
Import graphics using se78 in bmp format
Dear Moderator,
I search all of them but no one of them solve my issues. Its a very urgent. Please Unlock them .so I am getting my solutions as early as possible.
Regards,
AnishHi.....
I try to import a graphics in bmp format using se78 t-code. but image looks different from orginal one i.e. it becomes blur.
Any other method we can import bmp format images .
Regards,
Anish -
FDM import error (using ERPi)
Hi,
Could anyone guide me how can I solve this error?
The text file is generated fine if I run rule direct in ERPi.
HFM Version: 11.1.1.3
admin.log
** Begin FDM Runtime Error Log Entry [2012-11-19-15:17:04] **
ERROR:
Code............................................. 4003
Description...................................... Oracle (SQL-Loader) data load failed, please see processing log for details!
At Line: 200
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1111
Thread........................................... 3268
IDENTIFICATION:
User............................................. admin
Computer Name.................................... BAYHFM-APP-UAT
App Name......................................... BAY_Group_Database
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... UHYPERDB
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... ACAL
Location ID...................................... 753
Location Seg..................................... 7
Category......................................... FDMACTUAL
Category ID...................................... 13
Period........................................... Jun - 2011
Period ID........................................ 6/30/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... False
Is Auditor....................................... False
datafile.log
User ID........... admin
Location.......... ACAL
Source File....... D:\Hyperion\products\FinancialDataQuality\FDMApplication\BAY_Group_Database\Inbox\admin243232682665.dat
Processing Codes:
BLANK............. Line is blank or empty.
ESD............... Excluded String Detected, SKIP Field value was found.
NN................ Non-Numeric, Amount field contains non numeric characters.
RFM............... Required Field Missing.
TC................ Type Conversion, Amount field could be converted to a number.
ZP................ Zero Suppress, Amount field contains a 0 value and zero suppress is ON.
Create Output File Start: [2012-11-19-15:17:02]
[Blank] -
Excluded Record Count..............0
Blank Record Count.................1
Total Records Bypassed.............1
Valid Records......................3405
Total Records Processed............3406
Begin Oracle (SQL-Loader) Process (3405): [2012-11-19-15:17:03]
Oracle (SQL-Loader) Log File Contents:
SQL*Loader: Release 10.2.0.1.0 - Production on Mon Nov 19 15:17:03 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File: C:\DOCUME~1\fdmadmin\LOCALS~1\Temp\tWadmin243232688577.ctl
Character Set UTF16 specified for all input.
Using character length semantics.
First primary datafile C:\DOCUME~1\fdmadmin\LOCALS~1\Temp\tWadmin243232688577.tmp has a
little endian byte order mark in it.
Data File: C:\DOCUME~1\fdmadmin\LOCALS~1\Temp\tWadmin243232688577.tmp
Bad File: C:\DOCUME~1\fdmadmin\LOCALS~1\Temp\tWadmin243232688577.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Continuation: none specified
Path used: Direct
Load is UNRECOVERABLE; invalidation redo is produced.
Table TWADMIN243232688577, loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
DATAKEY SEQUENCE (1, 1)
PARTITIONKEY FIRST * CHARACTER
Terminator string : '~|'
CATKEY NEXT * CHARACTER
Terminator string : '~|'
PERIODKEY NEXT * DATE YYYYMMDD
Terminator string : '~|'
DATAVIEW NEXT * CHARACTER
Terminator string : '~|'
ACCOUNT NEXT * CHARACTER
Terminator string : '~|'
ENTITY NEXT * CHARACTER
Terminator string : '~|'
ICP NEXT * CHARACTER
Terminator string : '~|'
UD1 NEXT * CHARACTER
Terminator string : '~|'
UD2 NEXT * CHARACTER
Terminator string : '~|'
UD3 NEXT * CHARACTER
Terminator string : '~|'
UD4 NEXT * CHARACTER
Terminator string : '~|'
UD5 NEXT * CHARACTER
Terminator string : '~|'
UD6 NEXT * CHARACTER
Terminator string : '~|'
UD7 NEXT * CHARACTER
Terminator string : '~|'
UD8 NEXT * CHARACTER
Terminator string : '~|'
UD9 NEXT * CHARACTER
Terminator string : '~|'
UD10 NEXT * CHARACTER
Terminator string : '~|'
UD11 NEXT * CHARACTER
Terminator string : '~|'
UD12 NEXT * CHARACTER
Terminator string : '~|'
UD13 NEXT * CHARACTER
Terminator string : '~|'
UD14 NEXT * CHARACTER
Terminator string : '~|'
UD15 NEXT * CHARACTER
Terminator string : '~|'
UD16 NEXT * CHARACTER
Terminator string : '~|'
UD17 NEXT * CHARACTER
Terminator string : '~|'
UD18 NEXT * CHARACTER
Terminator string : '~|'
UD19 NEXT * CHARACTER
Terminator string : '~|'
UD20 NEXT * CHARACTER
Terminator string : '~|'
DESC1 NEXT * CHARACTER
Terminator string : '~|'
DESC2 NEXT * CHARACTER
Terminator string : '~|'
ATTR1 NEXT * CHARACTER
Terminator string : '~|'
ATTR2 NEXT * CHARACTER
Terminator string : '~|'
ATTR3 NEXT * CHARACTER
Terminator string : '~|'
ATTR4 NEXT * CHARACTER
Terminator string : '~|'
ATTR5 NEXT * CHARACTER
Terminator string : '~|'
ATTR6 NEXT * CHARACTER
Terminator string : '~|'
ATTR7 NEXT * CHARACTER
Terminator string : '~|'
ATTR8 NEXT * CHARACTER
Terminator string : '~|'
ATTR9 NEXT * CHARACTER
Terminator string : '~|'
ATTR10 NEXT * CHARACTER
Terminator string : '~|'
ATTR11 NEXT * CHARACTER
Terminator string : '~|'
ATTR12 NEXT * CHARACTER
Terminator string : '~|'
ATTR13 NEXT * CHARACTER
Terminator string : '~|'
ATTR14 NEXT * CHARACTER
Terminator string : '~|'
MEMOKEY NEXT * CHARACTER
Terminator string : '~|'
AMOUNT NEXT * CHARACTER
Terminator string : '~|'
CALCACCTTYPE CONSTANT
Value is '9'
CHANGESIGN CONSTANT
Value is '0'
AMOUNTX CONSTANT
Value is '0'
ACCOUNTR CONSTANT
Value is '0'
ACCOUNTF CONSTANT
Value is '0'
ENTITYR CONSTANT
Value is '0'
ENTITYF CONSTANT
Value is '0'
ICPR CONSTANT
Value is '0'
ICPF CONSTANT
Value is '0'
UD1R CONSTANT
Value is '0'
UD1F CONSTANT
Value is '0'
UD2R CONSTANT
Value is '0'
UD2F CONSTANT
Value is '0'
UD3R CONSTANT
Value is '0'
UD3F CONSTANT
Value is '0'
UD4R CONSTANT
Value is '0'
UD4F CONSTANT
Value is '0'
UD5R CONSTANT
Value is '0'
UD5F CONSTANT
Value is '0'
UD6R CONSTANT
Value is '0'
UD6F CONSTANT
Value is '0'
UD7R CONSTANT
Value is '0'
UD7F CONSTANT
Value is '0'
UD8R CONSTANT
Value is '0'
UD8F CONSTANT
Value is '0'
UD9R CONSTANT
Value is '0'
UD9F CONSTANT
Value is '0'
UD10R CONSTANT
Value is '0'
UD10F CONSTANT
Value is '0'
UD11R CONSTANT
Value is '0'
UD11F CONSTANT
Value is '0'
UD12R CONSTANT
Value is '0'
UD12F CONSTANT
Value is '0'
UD13R CONSTANT
Value is '0'
UD13F CONSTANT
Value is '0'
UD14R CONSTANT
Value is '0'
UD14F CONSTANT
Value is '0'
UD15R CONSTANT
Value is '0'
UD15F CONSTANT
Value is '0'
UD16R CONSTANT
Value is '0'
UD16F CONSTANT
Value is '0'
UD17R CONSTANT
Value is '0'
UD17F CONSTANT
Value is '0'
UD18R CONSTANT
Value is '0'
UD18F CONSTANT
Value is '0'
UD19R CONSTANT
Value is '0'
UD19F CONSTANT
Value is '0'
UD20R CONSTANT
Value is '0'
UD20F CONSTANT
Value is '0'
ARCHIVEID CONSTANT
Value is '11071'
HASMEMOITEM CONSTANT
Value is '0'
STATICDATAKEY CONSTANT
Value is '0'
Referential Integrity Constraint/Trigger Information:
NULL, UNIQUE, and PRIMARY KEY constraints are unaffected.
Trigger BAY_HYPER4."TWADMIN243232688577_AK" was disabled before the load.
Record 1: Rejected - Error on table TWADMIN243232688577, column AMOUNT.
ORA-01400: cannot insert NULL into (AMOUNT)
BAY_HYPER4."TWADMIN243232688577_AK" was re-enabled.
Table TWADMIN243232688577:
3404 Rows successfully loaded.
1 Row not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Bind array size not used in direct path.
Column array rows : 3000
Stream buffer bytes: 256000
Read buffer bytes:18576000
Total logical records skipped: 0
Total logical records read: 3405
Total logical records rejected: 1
Total logical records discarded: 0
Total stream buffers loaded by SQL*Loader main thread: 2
Total stream buffers loaded by SQL*Loader load thread: 3
Run began on Mon Nov 19 15:17:03 2012
Run ended on Mon Nov 19 15:17:04 2012
Elapsed time was: 00:00:00.97
CPU time was: 00:00:00.56
Oracle (SQL-Loader) Bad File Contents:
753~|13~|20110630~|YTD~|Required Field Missing.~|Required Field Missing.~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|0~|
[RDMS Bulk Load Error Begin]
Message: (4003) - Oracle (SQL-Loader) data load failed, please see processing log for details!
See Bulk Load File: C:\DOCUME~1\fdmadmin\LOCALS~1\Temp\tWadmin243232688577.tmp
[RDMS Bulk Load Error End]When I go to see the data in "C:\DOCUME~1\fdmadmin\LOCALS~1\Temp\tWadmin243232688577.tmp", the data shows as below
753|13|20110630|YTD||||||||||||||||||||||||||||||||||||||||0|
753|13|20110630|YTD||||||||||||||||||||||||||||||||||||||||0|0
753|13|20110630|YTD||||||||||||||||||||||||||||||||||||||||0|0
753|13|20110630|YTD||||||||||||||||||||||||||||||||||||||||0|0
It seems that the data is missing (total record is correct but the value is missing). But If I generate text file by running rule in ERPi direct, the data is ok.
PS. I try to change to "SQL Insert" but it's not work.
Any idea?
Thanks. -
Cheers,
Using TIFF/JPEG-12 (Photoshop CS3/CS4) for long term image storage format - are there any cons? Images will be in both RGB/CMYK/gray tagged/untagged and subsequently used in printed advertisements (layouted using InDesign) - high image fidelity is not the goal.
Thanks.
Best wishes,
Rasmus OlsenGentlemen, allow me to explain:
I have a partner with somewhat low bandwidth. This partner will receive images with layers/transparency and return images with layers/transparency. I started with lossless formats like PSD and TIFF/ZIP, but this takes way to long to upload/download. TIFF/JPEG seems to be the only feasible way to solve this. Besides, preliminary tests show no visible difference when comparing highres JPEG with PSD on printed paper.
When I wrote cons I wasn't thinking of image quality degradation (JPEG is a lossy format - I allready know that). Obviously TIFF/JPEG is supported by Adobe and InDesign, but are there be any compatability issues regarding for instance TIFF/JPEG-embedded ICC's? Any possible trouble with TIFF transparency? Etc?
BTW When working with advertisements you will inevitable receive untagged material. Later in the workflow these images will have a profile assigned.
Best wishes,
Rasmus Olsen -
new to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(
So where is LR trying to copy the files? Check your destination in the Import panel at the right.
-
Adding Metadata to JPEG, EPS, PSD, TIFF
Hi all,
I would like to know how if is possible to a read and write metadata (basically Caption and Kewords fields) to a different kind of files (EPS with JPEG compression, TIFF, JPEG, PSD...) WITHOUT opening them in Photoshop.
I need to manage all from Scripting, usually AS or AppleScript Studio.
At the moment I do this opening them, writing them and resaving them but I would like to know if a more faster and professional way exists.
I know exiftool but I would like to use Adobe routine or products.
StefanoStefano, I would have thought that 'exiftool' was the best solution for you by far. Never done it but if I recall correctly the developer allows for this to be included in your AppleScript Studio app? The problems that you are going to encounter with the Bridge option are No Access to the Application directly from AppleScript, Bridge is ONLY scriptable via Adobe's ExtendScript/JavaScript. Adobe's other Applications allow AppleScript to perform JavaScript so the ONLY way to communicate with Bridge is via one of these and the BridgeTalk messaging system. Although Bridge will alter the metadata without actually opening the file you will end up launching 2 App's if they are NOT already running. If you don't already know JavaScript then the learning curve for what's involved in this process is considerably more than that of the 'exiftool' man pages. Plus I would expect the performance of calling the shell from your app would blow the Adobe route out of the water… BTMO
-
Pardon the fact that this reiterates information now part of other threads, but this is an issue of make or break proportions for some users--it certainly was for me. And it needs prominent clarification
So I decided to give itits own thread! I had written off LR for production work when the word got out that the same name solution was only partial in 1.1. I needed to see archived folders with same named sets of RAW, tif, jpeg, and psd images ( or combnations thereof). There is a solution to getting these into LR:
Jim Burgess found that if you import a newly made folder that has a RAW, tif, jpeg, and psd with the same name, it will bring them all in side by side.
I had at first found that none of my existing folders in the db could be refreshed from the INSIDE and do that--all that got brought in was the jpeg to join the RAW of the same name already in there!
After learning of Jim's success, I then deleted a folder that was already in the db that had all four same name but different format files in it with only the RAW showing. I then reimported that folder and it saw all the files with the same name (all four formats-RAW,tif,jpeg, and psd) and ingested them.
Why it can't be refresed from the inside is a mystery to me--or I just haven't discovered any way to do it, and I have tried synchronize folder and reimport repeatedly--neither work. Looks like one has to dump the folder and then import it afresh to get them all--but that for sure will do it! Whoopoeee!
It does mean that if new file formatted images with the same name get added from outside LR to a folder already in LR with the RAW in there, that you will then have to delete that folder and reimport when you go back to LR.
Looks like an incomplete implementation of this feature to me, but a whole lot better than not being able to see all same named files side by side.It is actually pretty easy for those only wanting to get the jpegs from existing folders, and fine for importing new folders. I am still puzzed why they implemented it this way--or perhaps they intended that one could use synchronize folders to get all the formats in, and this is really just a 'bug'.
In any event, let's hope they finish the job. -
Import logo using RSTXLDMC prg giving error msg like
Hi All
I am importing logo(tif format)
by using RSTXLDMC program, it's giving error mesage "TIFF format error: No baseline TIFF 6.0 file"
can anyone explain me this issue.
Regards
Chinnaprogram: RSTXLDMC , upload .tiff file from C drive . ( type = BMON/ BCOL , text id = ST ..., text = name..so10) INCLUDE name OBJECT ID STANDARD in layout set window .
Save a Logo using Paintshop Pro or Corel Draw as Tiff file. Use RSTXLDMC to convert the logo to standard text in SapScript. When the program is executed, the path and file name have to be correctly specified.
Process could be like the following:
Run RSTXLDMC
Enter file name C:\MAIL\COMPLOGO.TIF
Resolution for Tiff file
Absolute X-position
Absolute Y-position
Absolute positioning
Reserved height
Shift to right
UOM = CM
Text title
Line width for text = 132
Text name ZHEX-MACRO-COMPLOGO
Text ID ST
Text language = E
Postscript scaling
Width & Height according to PS scaling
Number of Tiff gray levels (2,4,9) 2
Then Create a new window 'COMP' with attributes;
Window COMP description Company Logo
Window type CONST
Left margin 7.00 CH window width 10.00 CH
Upper margin LN window height 8.00 LN
Finally in the text element , mention
/: INCLUDE 'ZHEX-MACRO-COMPLOGO' OBJECT TEXT ID ST LANGUAGE 'E'.
Please note that if object name is not indicated as 'ZHEX...', the logo may not be printed!
You will not be able to see the logo in a test print. The same will be printed in actual printout.
If you are using two logos in the same layout, the names of the logos should be unique. Say 'ZHEX-MACRO-LOGO1' and 'ZHEX-MACRO-LOGO2'. Else all the information will be overwritten.
If the logo is not EXACTLY TIFF 6.0 , the same will not be printed.
See OSS notes 5995, 18045, 39031 for some inputs.
regards
vinod -
How to compress image files, jpeg, bmp, gif, png, tiff, etc
I am new to Jave imaging, does anybody know how to compress an image file, including jpeg, bmp, gif, png, tiff format.
Thanks
JCsome are already compressed.
If you just want generic compression, it doesn't really matter what type of file they are. A simple approach would be to use ZipOutputStream -
Getting error while importing metadata using View Objects
Hi All,
I am trying to create a repository using View Object in OBIEE 11.1.5.1 but getting error while viewing the data, after importing the metadata in the repository "[nQSError: 77031] Error occurs while calling remote service ADFService11G. Details: Runtime error for service -- ADFService11G - oracle/apps/fnd/applcore/common/ApplSession".
I am also getting error "žADFException-2015: The BI Server is incompatible with the BI-ADF Broker Servlet: BI Server protocol version = null, BI-ADF Broker Servlet protocol version = 1" during testing my sample which is deployed to Admin server. I followed BI Adminstrator help file guide in order to create the sample for creating repository using view object.
Admin server log says
[2011-09-27T02:59:03.646-05:00] [AdminServer] [NOTIFICATION] [] [oracle.bi.integration.adf] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: b260b57746aa92d3:-1f9ca26:1328fcfd3e6:-8000-0000000000006744,0] [APP: BIEEOrders] [[
QUERY:
<?xml version="1.0" encoding="UTF-8" ?><ADFQuery><Parameters></Parameters><Projection><Attribute><Name><![CDATA[Deptno]]></Name><ViewObject><![CDATA[AppModule.DeptViewObj1]]></ViewObject></Attribute><Attribute><Name><![CDATA[Dname]]></Name><ViewObject><![CDATA[AppModule.DeptViewObj1]]></ViewObject></Attribute><Attribute><Name><![CDATA[Loc]]></Name><ViewObject><![CDATA[AppModule.DeptViewObj1]]></ViewObject></Attribute></Projection><JoinSpec><ViewObject><Name><![CDATA[AppModule.DeptViewObj1]]></Name></ViewObject></JoinSpec></ADFQuery>
[2011-09-27T02:59:04.199-05:00] [AdminServer] [ERROR] [] [oracle.bi.integration.adf.v11g.obieebroker] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: b260b57746aa92d3:-1f9ca26:1328fcfd3e6:-8000-0000000000006744,0] [APP: BIEEOrders] java.lang.NoClassDefFoundError: oracle/apps/fnd/applcore/common/ApplSession[[
at oracle.bi.integration.adf.ADFDataQuery.makeQueryBuilder(ADFDataQuery.java:81)
at oracle.bi.integration.adf.ADFDataQuery.<init>(ADFDataQuery.java:70)
at oracle.bi.integration.adf.ADFReadQuery.<init>(ADFReadQuery.java:15)
at oracle.bi.integration.adf.ADFService.makeADFQuery(ADFService.java:227)
at oracle.bi.integration.adf.ADFService.execute(ADFService.java:136)
at oracle.bi.integration.adf.v11g.obieebroker.ADFServiceExecutor.execute(ADFServiceExecutor.java:185)
at oracle.bi.integration.adf.v11g.obieebroker.OBIEEBroker.doGet(OBIEEBroker.java:89)
at oracle.bi.integration.adf.v11g.obieebroker.OBIEEBroker.doPost(OBIEEBroker.java:106)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:62)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.ClassNotFoundException: oracle.apps.fnd.applcore.common.ApplSession
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
... 38 more
Please suggest how to make it work.Hi,
Thanks for providing the online help URL, i have already completed the steps mentioned in URL
I am able to import metadata using view object but getting above error("[nQSError: 77031] Error occurs while calling remote service ADFService11G. Details: Runtime error for service -- ADFService11G - oracle/apps/fnd/applcore/common/ApplSession".") while validating the data.
It fails at step 5 of "To import metadata from an ADF Business Component data source:" section of above URL. -
Error message when importing data using Import and export wizard
Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
URGENT: Error while importing personalizations using Functional Admin Resp
Hi all,
We are facing problem when importing personalizations using Functional Administrator responsibility.
We have personalised a standard oracle page in development instance and have successfully exported the personalizations in a file.
But when we try to import the same files in another instance, we get the following error when opening "Exported Personalizations" tab in "Personalizations> Import/Export" tab .
The path ' $HOME/ ' you specified does not exist. Please specify an existing path in the profile 'FND: Personalization Document Root Path'.
We have tried giving different paths in profile option 'FND: Personalization Document Root Path', but it gives the same error for every path in this new instance.
This was not the case with the development instance where we were able to import/export personalizations successfully.
Can anybody give inputs on this.
This is a bit urgent.
Regards,
Anas.What is the current value in the Profiles Form?
What is the value that is displayed in the "About this Page" -> "Profiles", from the Functional Administration screen.
Can you also confirm if the directory has 777 permissions?
Maybe you are looking for
-
Updating my mid 2010 MacBook Pro
This is the third time I have tried to post this so if it is here three times.....my humble apologies... After adding Yosemite to my mid 2010 macbook pro I realized, after experiencing the beach ball of death every 3-4 minutes and slow activity, that
-
Creating a logical data model in BPA 11g
Hi, Can we create a logical data model in BPA 11g? If we can do that can it be moved over to the BPM environment seamlessly. I was under the impression that during the modelling exercise a business analyst would develop process models and logical dat
-
After installing the WCS upgrade to 7 to the wrong drive letter, I uninstalled it and reinstalled to the correct drive. I then restored the database backup and all looked ok. I noted that in the restore, I now had a System campus. Thought I would
-
My computer beeps when I turn it on . I have tried to reset pram but can't get past the beeps.
-
I have lost appstore from my iphone4. ¿How could I download it again?
Hi, I ihave lost appstore from my iphone, then I can't download other apps. How could I get it again? Thanks.