Import Existing EAR file into JSE 8

Hi
Can anyone tell me how I can import an existing EAR file (generated outside of SJSE) into sun Java Studio Enterprise 8 using it to creating a project so I can use JSE8 as my development tool? The EAR file has been exported including the source code.
Thanks
John.

There is create new �Enterprise Application with Existing Source� option in
File -> New Project -> Enterprise wizard.
This �imports an existing enterprise application into a standard IDE project.
The enterprise application must conform
to the J2EE BluePrints Project Conventions for Enterprise Applications
(see http://java.sun.com/blueprints/code/projectconventions.html).
This wizard also imports components that are nested in the enterprise application.
Standard projects use an IDE-generated Ant build script to build and run your project.�

Similar Messages

How to best import existing audio files into iTunes?

Hello,
In sum, my question is: What is the difference between adding music to iTunes Library by the following methods:
Placing the audio files in the 'Automatically Add to iTunes' Folder;
Dragging the files from my hard drive to the Source Pane in iTunes; or
Using the File > Add Folder to Library dialogue?
Here are the particulars of my situation:
I have over 3,000 music files, and I would like to know the best way to get them into iTunes. From a lynda.com training video about using iTunes, I learned that there is a folder called "Automatically Add to iTunes", which is monitored by iTunes for new files to import into the iTunes library. However, I would like to know if this is the *best* way to do this. For example, can I just *move* my 3,000 music files into this 'Automatically Add to iTunes' folder and then let iTunes do its thing?
Will iTunes *move* the files that it is able to manage OUT of this folder and into one of its managed folders, such that there would be no duplicate file left behind? Is it correct in saying that the files that are left in this folder that were not able to be handled by iTunes and must be handled differently before they can be imported into iTunes? Or is there just an all around different, and better, way to get these music files into iTunes?
Thanks for your advice and opinions!
~Antonio

Hello tt2,
I have given this a lot of thought and attention over the last few days. As well, I appreciate very much your input and offers of help.
The major 'problem' that I have is that the files are most definitely not consistently named. For example, they include the likes of the following:
07 - Song Name - Song Artist.mp3
01 - Song Artist_Song Name.wma
Song Name [Song Artist].aac
And these are only examples, based on my trying to get across how variant the names are. The actual file names are far more wildly various than even these, seemingly consistent file names.
So, this is what I was thinking of doing, per your suggestion:
An alternative aproach would be to use something like MediaMonkey (has advanced filename/path to tag tools) or MusicBrainz Picard (attempts to match audio fingerprints) to update the tags before the files get introduced to iTunes.
Then...
1. Move the files into the 'Automatically Add to iTunes' folder, then let iTunes have a go at getting them in to iTunes.
2. Using either Tuneup or MusicBrainz Picard (Any comment on which is better?) to cleanup the file names (again) properly; and
3. Then using your script to force iTunes to update itself, based on any new id3 data.
Does this sound like madness? Or is it a good solution for this application? I am very grateful for your, or any other, input.
Take good care,
~Antonio

Importing .ear file into NWDS

Hi Experts,
Do we have an option to import .ear file into NWDS directly? This ear file contains .war file. But I am not getting any option to do this import. Pls guide me.
Thanks in Advance
Mathur Saurabh

Hi,
Try in this way
Select the Appropriate Project as per you .ear file(WDA,JAVA,J2ee)
If java project
1) File--> New > Project>Java> Java Project> Project Name--> Choose the unziped Earfile path as the DictionaryPath.
If Enterprise Application Like(.war file and .jar)
File--> New > Project>J2eeProject> Enterprise Applicaion> Project Name--> Choose the unziped Earfile path as the DictionaryPath.
Thanks,
Sreeni.

Error coming while deploying portal EAR file into the weblogic Portal 8.1..

HI Guys,
When I deploy the latest PORTAL EAR file into the BEA portal environment we
receive a number of these errors:
####<Feb 27, 2008 4:36:14 PM PST> <Warning> <netuix> <dev147> <portalName>
<ExecuteThread: '0' for queue: 'weblogic.kernel.System'> <<WLS Kernel>>
<BEA-423171> <
java.lang.Throwable: New portlet file
[portlet/portletname.portlet] and existing portlet
file null have the same definition label
Lebel Name. Will not create a definition for
portlet file [portlet/portletname.portlet].
at
com.bea.netuix.application.manager.persistence.jdbc.PortletDefinitionDelegate.c
reatePortletDefinitionInternal(PortletDefinitionDelegate.java:1442)
at
com.bea.netuix.application.manager.persistence.jdbc.PortletDefinitionDelegate.c
reatePortletDefinition(PortletDefinitionDelegate.java:906)
at
com.bea.netuix.application.manager.persistence.jdbc.PortletDefinitionManagerImp
l.createPortletDefinition(PortletDefinitionManagerImpl.java:520)
at
com.bea.netuix.application.manager.persistence.jdbc.PortletDefinitionManager_41
0kn4_EOImpl.createPortletDefinition
(PortletDefinitionManager_410kn4_EOImpl.java:476)
at
com.bea.netuix.servlets.repository.PortletFilePersistenceManager.create
(PortletFilePersistenceManager.java:189)
at
com.bea.netuix.servlets.repository.PortletFilePersistenceManager.createUpdatePo
rtletDefinitions(PortletFilePersistenceManager.java:304)
at com.bea.netuix.servlets.repository.PortletFilePersistenceManager.sync
(PortletFilePersistenceManager.java:609)
at
com.bea.netuix.servlets.repository.AbstractFilePersistenceManager$Sync.run
(AbstractFilePersistenceManager.java:187)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs
(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs
(SecurityManager.java:147)
at
com.bea.netuix.servlets.repository.AbstractFilePersistenceManager.startup
(AbstractFilePersistenceManager.java:86)
at com.bea.netuix.servlets.manager.PortalServlet.initFilePoller
(PortalServlet.java:511)
at com.bea.netuix.servlets.manager.PortalServlet.init
(PortalServlet.java:242)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at weblogic.servlet.internal.ServletStubImpl$ServletInitAction.run
(ServletStubImpl.java:1099)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs
(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs
(SecurityManager.java:121)
at weblogic.servlet.internal.ServletStubImpl.createServlet
(ServletStubImpl.java:975)
at weblogic.servlet.internal.ServletStubImpl.createInstances
(ServletStubImpl.java:954)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet
(ServletStubImpl.java:893)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet
(WebAppServletContext.java:3456)
at weblogic.servlet.internal.WebAppServletContext.preloadServlets
(WebAppServletContext.java:3413)
at weblogic.servlet.internal.WebAppServletContext.preloadServlets
(WebAppServletContext.java:3399)
at weblogic.servlet.internal.WebAppServletContext.preloadResources
(WebAppServletContext.java:3382)
at weblogic.servlet.internal.WebAppServletContext.setStarted
(WebAppServletContext.java:6262)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:892)
at weblogic.j2ee.J2EEApplicationContainer.start
(J2EEApplicationContainer.java:2181)
at weblogic.j2ee.J2EEApplicationContainer.activate
(J2EEApplicationContainer.java:2222)
at
weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.activateCo
ntainer(SlaveDeployer.java:2521)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.doCommit
(SlaveDeployer.java:2439)
at weblogic.management.deploy.slave.SlaveDeployer$Task.commit
(SlaveDeployer.java:2156)
at weblogic.management.deploy.slave.SlaveDeployer$Task.checkAutoCommit
(SlaveDeployer.java:2255)
at weblogic.management.deploy.slave.SlaveDeployer$Task.prepare
(SlaveDeployer.java:2150)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare
(SlaveDeployer.java:2402)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask
(SlaveDeployer.java:884)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta
(SlaveDeployer.java:592)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate
(SlaveDeployer.java:501)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute
(SlaveCallbackHandler.java:25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
Thanks in advance...
Regards,
Sandeep K

Before deploying the app, you could check database table PF_PORTLET_DEFINITION for any entries there which might conflict with yours.
--Stefan

Error While Importing from EIF file into AW

Hi All,
I am facing the following error while importing from EIF file into AW using AWM as well as from sql prompt.
java.sql.SQLException: ORA-36786: (IOSEC04) File POCAW/abc.eif does not exist or cannot be accessed.
ORA-06512: at "SYS.DBMS_AW", line 42
ORA-06512: at line 1
at oracle.olap.awm.eif.eifimport.ImportDialogActionThread.doExportOrImport(ImportDialogActionThread.java:172)
at oracle.olap.awm.eif.EifDialogActionThread.doAction(EifDialogActionThread.java:58)
at oracle.olap.awm.ui.dialog.ThreadedDialogActionThread.run(ThreadedDialogActionThread.java:49)
i have already created the directory pocaw.
i have done the following steps :
CREATE OR REPLACE DIRECTORY POCAW as 'D:\Olap_POC\export';
GRANT all ON DIRECTORY POCAW to PUBLIC;
execute dbms_aw.execute ('aw create ''POC_AW''');
execute dbms_aw.execute('cda pocaw');
execute dbms_aw.execute('dtb attach POC_AW rw');
execute dbms_aw.execute('import all from eif file ''/abc.eif'' dfns update ');
any idea or thought would be appreciable.
thanks n advance
anwar

execute dbms_aw.execute('import all from eif file''/abc.eif'' dfns update ');
Maybe one of the following file names could help
(have never tried it):
''abc.eif''
''POC_AW\abc.eif''Yes,
you don't need the slash. CDA is like setting a default directory.

Geting an error trying to import a data file into OWB repository

Hi,
We're using OWB 11.1.0.7.0
I'm trying to import a new data file and I'm getting an error.
When I go to The Project/Files/ I right click on the module I want to add the files to,
I get a 'Wizard' titled 'Welcome to the Import Metadata Wizard'.
I click next.
I get the 'Filter Information' screen that asks if I want to select 'All Data Files' or a specific file.
I pick 'All Data Files' and click 'next'.
I get the 'Object Selection' screen that has a left and right panel. The left side is titled 'Available' and the right side is titled Selected.
The 'Available' panel had the directory in Linux (/etl/datafeeds/dev) where our data files are stored with a plus sign next to it.
When I click the plus sign, I get an error message that says:
API2836: Directory
/etl/datafeeds/dev does not exist.Has anyone seen this? What is the work around? Is it a bug? How do I import a data file into OWB if this isn't the way to do it?
Thanks,

Hi, is there any obligation to use import wizard?
can you use right click and import view/table?
Ugur MIHCI
www.ifslibrary.com

BE6K - Is there a way to import Existing CUCM Config into the BE6K CUPM?

*Partner Question*
Is there a way to import import Existing CUCM Config into CUPM?
For example a customer has an existing CUCM deployment but wants to move to BE6K, can the existing config be exported a CSV and imported into the BE6K CUPM?

page 18 table 22 of BE6000 9.1 ordering guide says that if you have valid ESW contract then you can order upgrade to PCP via PUT tool.
Access to the Software Image, PAK and License File
The product numbers ordered for Prime Collaboration are: R-xxx and L-xxx. They result in an email being sent to the ordering ship-to email address providing instructions to access the Cisco eDelivery site to download the software image(s) and license Product Authorization Keys (PAKs) you ordered. The software image is downloaded and installed on the host server. The license PAK ID from the ESD site allows you to access the Cisco Licensing Site to associate the server MAC address to a license key or keys that are then installed on the host server(s). These license keys activate the Prime Collaboration software to be used in a production environment. These license keys also convert a trial installation into a production environment.
http://www.cisco.com/en/US/partner/docs/net_mgmt/prime/collaboration/9.0/quick/start/guide/Cisco_Prime_Collaboration_9.html#wp113706

How to import existing jsp project into jdeveloper

can someone help me how to import existing jsp project into jdeveloper?
can give me step by step to import..cause i am new for jdeveloper..
thank you very much

Well there are two options - if you have a WAR file with the code in it, then you can use the file->import WAR.
Or you can use the new->Project from source code.
Note that you'll probably need to do some library settings and some directory setting after that.
Have a look at this demo for basic steps:
http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/NBtoJDevProject/NBtoJDevProject.html

Deploying an existing WAR file into the Portal

I have downloaded the Enterprise Portal and the SAP Netweaver Developer Studio (NDS) and have succeeded in creating a couple of projects of the Hello World variety and deployed them on the Portal! So far, so good.
The problem I have is that need to deploy on the Portal an existing JSP/Struts application of ours which is available as a Web Archive (WAR) file.
The problem is that I cannot find a way of deploying an existing WAR file on the Portal either via a Project or otherwise. I have found an entry in the Help files with the NDS which sounds promising, as it is entitled Import a .WAR File into a new project. However, the menu entry it says you should use (File ‑> Import ‑> MDK: Import a web archive (.WAR) into a new project) this last entry does not exist on my installation of NDS.
Any ideas or suggestions?

Hi Mustafa (and All) - thanks you very much for your answers, which has enabled me to make good progress.
I have created a project in the Deploy Tool, imported a simple WAR file into it, loaded to project and depployed it on my instance of the Portal - or at least I have deployed it as far as the Deploy Tool is concerned.
However, when I try to find it in the Portal in order to assign it to an iView in the Portal content, I can't find any evidence of its existence!!
As another 'tack' in the NDS I have created an 'Enterprise Application Project', into which I appear to have imported the WAR file - but I cant package this as a PAR file, which is what I seem to need to do to get it into an iView on the Portal. To create a PAR package I seem to need to create a 'Portal Application Project' - but I can't find a way of getting the WAR file into that!!
Any further advice would be greatefully received.
Thanks for your help to date and thanks in advance for any more you may be able to give.
Regards,
Dave

How do I import a PSD file into AI?

How do I import a PSD file into AI?

Place the PSD (File menu) if you are bringing it into an existing AI document, or simply choose to Open it if you are going to use the document size from the PSD file and simply add to it.
Take care, Mike

Bizarre problem trying to import .MTS (AVCHD) files into PSE7 Organizer

Hi
b Summary of problem:
*I recently upgraded to PSE 7 / PRE 7
*I am trying to import .MTS (AVCHD) files into the PSE7 Organizer
*I get a "...did not contain any supported file types..." error on attempted import
b HOWEVER...
*I can edit same footage in PRE7
*This footage is automatically added to the Organizer
*I can play this footage in the PSE7 organizer but generating thumbnails takes ages
*Camera: Sony HDR SR12 producing .MTS files (full 1920x1080i HD)
*PC: Intel Core i7 940 CPU, 6GB RAM, RADEON HD 4870 512MB
*OS: Vista 64 bit
b Detail:
I have recently upgraded my PRE/PSE bundle to ver 7 primarily because the new version of PRE boasts support for AVCHD.
Having installed the new software I quickly tried editing footage in PRE7 with video taken on my Sony HDR SR12 camera (footage taken in full 1920x1080i HD) and it works! Hoorah! I can now finally edit AVCHD footage in it's native format using PRE. Thank you Adobe!
But my joy was very shortlived because when I tried to import some other footage from the same batch into my PSE7 Video Catalog it wouldn't work. I got a pop up box containing the following error:
i "Nothing was imported. The file(s) or folder(s) selected to import did not contain any supported file types, or the files are already in the catalog."
Under this message is a list of the files that I tried to import. Next to each one there is a reason (it's the same reason for each clip):
i "Reason: The file is damaged or is a format that cannot be included in the Organizer."
To import files I use the following method: File / Get Photos and Videos / From Files and Folders
HOWEVER, the files that I imported directly into PRE7 in order to edit them have (surprise, surprise!) automatically been added PSE7 Organizer's Catalog. It takes a quite a while to generate a thumbnail for each clip but it does eventually do it and when it does I can play that footage in PSE7.
Just in case you're confused by this stage... If I try and manually add files to the PSE7 Organizer it doesn't work BUT if I edit that footage in PRE7 and then load the PSE7 Organizer I see the footage has been automatically added. This makes no sense whatsoever!
Am I doing something really stupid here? Why oh why will the PSE7 Organizer not import .MTS (AVCHD) files?!
NB: While searching for a solution to this problem I have, thanks to this Forum, found out about the K-Lite Codec Pack. I downloaded and installed the Basic pack v4.4.5 and now I can, at least, play my .MTS video files in Windows Media Player... I wish I had found out about that a couple of months ago because it would have saved me from buying Cyberlink PowerDVD 8!
Please someone help before I lose the plot.
Thanks
Patrick
b PC: Intel Core i7 940 CPU, 6GB RAM, RADEON HD 4870 512MB, Vista 64 bit
b Camera: Sony HDR SR12 producing .MTS files (footage in full 1920x1080i HD)

Hi
I'd just like to add an update to this post.
b Summary:
*K-Lite Codec Pack clashes with Sony's Picture Motion Browser (PMB) software
*Analysis of video in Sony's PMB is well worth doing!
*You can Drag and Drop clips from Sony's PMB into PRE7
b Detail:
As you've probably gathered I have now settled on using Sony's Picture Motion Browser (PMB) to Catalog all my video. Sorry Adobe to talk about someone elses product but the Adobe Organizer just can't cope with AVCHD footage no matter how you manage to import it! It's far too sluggish and my PC has an Intel Core i7 940 CPU with 6GB RAM and a 10,000 RPM HDD!
Anyway, in my first post you'll have read me raving about the K-Lite Codec Pack but sadly I've had to uninstall it because it kept on causing PMB to crash. PMB runs much smoother and quicker WITHOUT that codec pack. Something about it clashed with PMB. The once agile PMB became sluggish and unresponsive.
Having now removed the codec pack PMB is back to being agile and generaly lovely.
To view AVCHD footage outside of PMB I have reverted to using Cyberlink's PowerDVD 8 - there's always a pregnant pause between double-clicking on the clip and it playing but that's the only drawback.
If you are going to use Sony's PMB for cataloging your video collection (and I recommend you do so BUT only if you have AVCHD footage - otherwise stick to Adobe's Organiser) then I can fully recommend "Analyzing" all of your footage. This takes time and a bit of patience because it kept stopping for no apparent reason but would readily start up again (without having to do anything else) BUT once it's done it'll reward you with the following:
*Filter on any combination of Scenery, People, Smiles - e.g. with a click of a button you can isolate footage that contains smiles, etc
*Face Search - if you select some or all of the footage in the right-hand pane it will then put a small thumbnail for all of the different faces in that selected footage in the bottom "Face Search" pane. If you then click on one of those thumbnails it will jump to the clip(s) that contain that face and grey out all the other clips
*Expand Videos - This tool is brilliant! In normal viewing mode you get a thumbnail of the video whether you're in Folder view, Calender view or Detail List view. If, however, you select "Expand Videos" from the tool bar it will show you a series of frames contained within that clip. You can choose from "Highlights" or various regular intervals (5 secs, 10 sec, 30 sec, 1 min, etc). The Highlights option does a pretty good job of picking out the significant changes within the clip
Lastly, I have discovered that you can drag a clip from Sony's PMB into PRE7. It won't let you put it directly onto the Timeline but it will let you drop it into the Project file list (found under the Edit tab).
I do hope that this info has helped others like me who are trying to get to grips with editing and cataloging AVCHD footage.
Patrick

How do I import one xml file into 3 separate tables in db?

I need to utilize xslt to import one xml file into 3 separate tables: account, accountAddress, streetAddress
*Notice the missing values in middleName, accountType
sample xml
<account>
<firstName>Joe</firstName>
<middleName></middleName>
<lastName>Torre</lastName>
<accountAddress>
<streetAddress>
<addressLine>myAddressLine1</addressLine>
<addressLine>myAddressLine2</addressLine>
</streetAddress>
<city>myCity</city>
<state>myState</state>
<postalCode>mypostalCode</postalCode>
</accountAddress>
<accountId>A001</accountId>
<accountType></accountType>
<account>
I need the following 3 results in 3 separate xml files in order for me to upload into my 3 tables.
Result #1
<rowset>
<row>
<firstName>Joe</firstName>
<lastName>Torre</lastName>
<accountId>A001</accountId>
<row>
<rowset>
Result #2
<rowset>
<row>
<addressId>1</address>
<city>myCity</city>
<state>myState</state>
<postalCode>myPostalCode</postalCode>
<row>
<rowset>
Result #3
<rowset>
<row>
<addressId>1</addressId>
<addressLineSeq>1</addressLineSeq>
<addressLine>myAddressLine1</addressLine>
<row>
<row>
<addressId>1</addressId>
<addressLineSeq>2</addressLineSeq>
<addressLine>myAddressLine2</addressLine>
<row>
<rowset>

Use XSU to store in multiple tables.
"XSU can only store data in a single table. You can store XML across tables, however, by using the Oracle XSLT processor to transform a document into multiple documents and inserting them separately. You can also define views over multiple tables and perform insertions into the views. If a view is non-updatable (because of complex joins), then you can use INSTEAD OF triggers over the views to perform the inserts."
http://download-west.oracle.com/docs/cd/B19306_01/appdev.102/b14252/adx_j_xsu.htm#i1007013

I can't import my iTunes files into pages, how can i fix the privileges problem?

when i try to import any mp3 file into a pages document, i get an access privileges error saying it is either corrupt, damaged or "can't be used" because I don't have access privileges. This has happened since I moved my iTunes library to an external drive. Anyone have any solutions? The privileges on both the library folder, and all its files are set to read and write for sharing and permissions.

If you do not have done so, set the "Ignore Ownership" flag on the external drive. YOu can set this flag from the "File > Get Info" panel for the drive.
How is your external drive formatted?
Can other applications open these mp3 files? QuickTime? Do they play in the Finder preview?
Do the filenames contain special charcters?
Léonie

A query while importing an XML file into a Database Table

Hi,
I am Creating an ODI Project to import an XML file into a Database Table.With the help of the following link
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/odi_11g/odi_project_xml-to-table/odi_project_xml-to-table.htm
I am facing a problem while creating Physical Schema for the XML Source Model.
For the
Schema(Schema)
and
Schema(Work Schema) field they have selected GEO_D.
What is GEO_D here??
or
What I have to select here?
1) schema of the xml file (NB:-I havn't created any .xsd or .dtd file for my .xml file)
or
2)my target servers schema
Please tell me what I'll do??
Thanks

and
Schema(Work Schema) field they have selected GEO_D.
What is GEO_D here??This is the schema name which is specified in the XML file .
What I have to select here?
1) schema of the xml file (NB:-I havn't created any .xsd or .dtd file for my .xml file)Yes
2)my target servers schema
Please tell me what I'll do??
Thanks

Errror while deploying ear file into sapwas

Hi all,
I am getting following error while deploying the ear file into sap web application server during the migration of j2ee medRec application into sapwas.
06/02/22 10:46:21 - ***********************************************************
Feb 22, 2006 10:46:21... Info: End of log messages of the target system.
Feb 22, 2006 10:46:21... Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Feb 22, 2006 10:46:21... Error: Aborted: development component 'Medical Records Patient Application'/'sap.com'/'localhost'/'2006.02.22.10.44.55':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/Medical Records Patient Application..
Reason: Incorrect multiplicity value: one. Use One or Many.; nested exception is:
com.sap.engine.services.ejb.exceptions.deployment.EJBXMLParserException: Incorrect multiplicity value: one. Use One or Many.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Feb 22, 2006 10:46:22... Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Feb 22, 2006 10:46:22... Error: -
At least one of the Deployments failed -
Thanks
Neeta Verma

Hi,
Check in the corresponding applcation.xml for entries
like <multiplicity>one</multiplicity>, <multiplicity>many</multiplicity> and replace them with <multiplicity>One</multiplicity> ,
<multiplicity>Many</multiplicity> respectively.
Regards,
Prasita

Import Existing EAR file into JSE 8

Similar Messages

Maybe you are looking for