Import/Export between different Portal versions

Hi, is there any resonable argument for not allowing imp/exp between different version? The thing is a developed a Page Group on a 9i AS and now need to export it to a 10g AS. It reasonable to think that an imp/exp machanism should exist, at least, for the latest version.

Hi there,
Yes, there is a reasonable argument for that and that is that the export code will be different from the import code. This means that alterations to the code in order to be more flexible or to even fix an issue, for example, on the export won't be in-place. Now when you'll try to import with the different code this certainly will clash your system (as the problem may already be within the DMP file that you've exported).
Although your request does make sense the implementation part is not that easy to be done.
I hope it helps you to better understand the constraints...
Cheers,
Pedro.

Similar Messages

  • Help Import Export between different database interfaces ODI

    Good morning!
    I am new to ODI and would like to help me in the following doubts: I'm developing some interfaces in a database tests, it logically all my configuration connection is that bank.
    When I import the interfaces in a database production, with another connection, I must reconfigure them totally, almost remaking them again? Or import, they automatically adjust?
    I thank you
    Emerson Formisano

    Hi  Emerson,
    I didn't get your point clearly.
    Please write in a proper statement.
    However I am telling you some checks and steps to export import.
    1> Before importing the interface please check all the source and target data stores are present in the deployment environment (where you are going to import)
    2> If not there Import the data stores first.
    3> data source should be physically present in DB (in case of table)
    4> If your data stores and KMs are available then you don't have to make the interfaces newly
    Thanks

  • Import objects between different SCV

    Hi,
    How can Import objects between different Software Component Versions
    Thanks

    Hi Sud,
    what do you mean by "import objects"? you mean swcv dependencies?
    you can make swcv dependencies in SLD.
    suppose if you have swcv x and y.if you want to access objects in x from y then in SLD select swcv y,in dependencies tab add swcv x.
    now all objects in swcv x are displayed under swcv y as <b>basis objects</b>.
    Please let me know if your requirement is different.
    Cheers,
    Jag

  • Differences between different IR versions

    Can you please tell me the differences between different IR versions?
    Thanks

    Here are the 11.1.2 specific IR changes: from the R&A Readme:
    Interactive Reporting
    Support for SFTP
    SFTP protocol is now supported for distribution outputs generated by jobs and schedules. For more information, see the Hyperion Reporting and Analysis Framework Administrator’s Guide.
    Interactive Reporting Roles
    Two new roles, IR HTML Viewer and IR WebClient Viewer, have been added for Interactive Reporting. For additional information, see the EPM User and Role Security Guide.
    Removal of CMC
    CMC is no longer a separate web application. All functionality has been merged into the Administer module. For more information, see the Hyperion Reporting and Analysis Framework Administrator’s Guide.
    There are also several Workspace changes which would could impact IR users as well, depening on your particular set up , it might be worthwhile reviewing those as well.
    Cheers, Iain

  • Unit Test exports between different SQL Developer versions

    Hi,
    I am having problems with trying to export and import unit test suites between SQL Developer versions. I can't find any documentation in this area. We have a number of unit test suites exported as XML files from version 2.1.1.64, and below are combinations of things I have tried:
    - I have tried to import a unit test suite into version 3.0.0.4 that was exported from version 2.1.1.64 and get the error "Import failed. unexpected null value". I expect that this is probably an unsupported action due to repository changes between the two versions - should I be able to do this?
    - I have upgraded the repository with unit tests in it. The unit tests run perfectly well in the upgraded repository. However, if I try to export any suites or individual tests, I get an error "Export failed.". A XML file is created but with what looks like only the header part of it.
    - I have created a new unit test suite in version 3.0.0.4 and this exports successfully.
    - I have gone into each test of a suite in the upgraded repository and made a change so that I can perform a commit. When I do an export, this does then work successfully.
    Therefore it appears that something is not carried out by default when the repository is upgraded, but this fixes itself if the test is amended and committed in the upgraded repository. Although this may be a workaround, we have 100's of tests and is not something I really want to do. Has anyone else experienced this and got any recommendations for this?
    Thanks, Pierre.

    Hi,
    I am having problems with trying to export and import unit test suites between SQL Developer versions. I can't find any documentation in this area. We have a number of unit test suites exported as XML files from version 2.1.1.64, and below are combinations of things I have tried:
    - I have tried to import a unit test suite into version 3.0.0.4 that was exported from version 2.1.1.64 and get the error "Import failed. unexpected null value". I expect that this is probably an unsupported action due to repository changes between the two versions - should I be able to do this?
    - I have upgraded the repository with unit tests in it. The unit tests run perfectly well in the upgraded repository. However, if I try to export any suites or individual tests, I get an error "Export failed.". A XML file is created but with what looks like only the header part of it.
    - I have created a new unit test suite in version 3.0.0.4 and this exports successfully.
    - I have gone into each test of a suite in the upgraded repository and made a change so that I can perform a commit. When I do an export, this does then work successfully.
    Therefore it appears that something is not carried out by default when the repository is upgraded, but this fixes itself if the test is amended and committed in the upgraded repository. Although this may be a workaround, we have 100's of tests and is not something I really want to do. Has anyone else experienced this and got any recommendations for this?
    Thanks, Pierre.

  • Data migration between different ECC versions

    Is there a way to migrate data between two different ECC versions?
    I know that there are differences between the tables and therefore TDMS transports are not possible. But is there another way to get master data from one version (6.0 EHP 3) to another one (6.0 EHP 4)? For example a tool that can prepare the exported data for the import in a higher version?
    thx

    That's indeed the most feasible option we have on the table right now. Although we have a lot of Z-fields and would need to transfer them with LSMW.
    The ZMATMAS has only been built for outbound...

  • Deployment manager between different OIM versions

    Hi everyone
    We installed OIM version 9.1.0.1 in our development environment but the customer want to install version 9.1.0.2 on the UAT environment. Is it safe to copy the customization between the 2 different verions using deployment manager?
    Thanks

    Hi,
    As per my knowledge in OIM, There are few things which you can go for export-improt in same version:
    1. Email Template
    2. UDFs
    3. Adapters.
    Process Form, Process Definitions, User Groups, Access Policies are not advisable to export/import in the same version alos if you have done any customization from your end if you are using OOTB you can do it.
    As you are going the change the OIM version, I will suggest you first export/import only three things as mentioned above, rest thing you try to recreate over there.
    Regards
    Alabhya Goel

  • Is import & export working in ECC version?

    i had one program. In which Export and Import is not working
    properly in ECC 6.0 version where as 4.6C working fine.
    If i commented the Import & Export than only it is working fine. Is there any other procedure OR how to use
    import and export in ECC version. Please advise me it is very
    urgent.
    Edited by: jagan ravula on Jan 29, 2008 8:00 AM

    Hi,
    To import from txt, look this:
    REPORT ZTXTTOTABLE .
    DATA: p_file TYPE string value 'C:\teste.txt',
    BEGIN OF TI_table OCCURS 0,
    COD(5) TYPE C,
    NAME(40),
    END OF TI_table,
    a(2).
    PARAMETERS: sel_file(128) TYPE c
    default 'C:\teste.txt' OBLIGATORY LOWER CASE.
    p_file = sel_file.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = p_file
    TABLES
    data_tab = ti_table[].
    format color COL_TOTAL INTENSIFIED ON.
    loop at ti_table.
    write: / sy-vline, ti_table-cod, at 10 sy-vline, ti_table-name,
    at 60 sy-vline.
    endloop.
    write: / sy-uline(60).
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
    CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
    def_filename = ''
    def_path = 'C:\'
    mask = ',Documentos de texto (*.txt), *.txt.'
    mode = ''
    IMPORTING
    filename = p_file
    EXCEPTIONS
    inv_winsys = 1
    no_batch = 2
    selection_cancel = 3
    selection_error = 4
    OTHERS = 5.
    find '.txt' IN p_file.
    if sy-subrc 0.
    concatenate p_file '.txt' into sel_file.
    else.
    sel_file = p_file.
    endif.
    top-of-page.
    format color COL_HEADING INTENSIFIED ON.
    uline (60).
    write: / sy-vline, 'COD', at 10 sy-vline, 'NAME', at 60 sy-vline.
    write: / sy-uline(60).
    to export to txt try it:
    *& Report ZTABLETOTXT *
    REPORT ZTABLETOTXT .
    TABLES: spfli.
    DATA: ti_spfli LIKE STANDARD TABLE OF spfli WITH HEADER LINE,
    p_file TYPE string value 'C:\spfli.txt'.
    PARAMETERS: sel_file(128) TYPE c
    default 'C:\spfli.txt' OBLIGATORY LOWER CASE.
    SELECT * FROM spfli INTO TABLE ti_spfli.
    p_file = sel_file.
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    FILENAME = p_file
    TABLES
    DATA_TAB = ti_spfli[].
    IF SY-SUBRC = 0.
    MESSAGE I398(00) WITH 'Arquivo criado com sucesso!'.
    else.
    MESSAGE E398(00) WITH 'Ocorreu um erro!'.
    ENDIF.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
    CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
    def_filename = ''
    def_path = 'C:\'
    mask = ',Documentos de texto (*.txt), *.txt.'
    mode = ''
    IMPORTING
    filename = p_file
    EXCEPTIONS
    inv_winsys = 1
    no_batch = 2
    selection_cancel = 3
    selection_error = 4
    OTHERS = 5.
    find '.txt' IN p_file.
    if sy-subrc 0.
    concatenate p_file '.txt' into sel_file.
    else.
    sel_file = p_file.
    endif.
    go through these links
    exporting internal table to memory variable
    http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/export01.htm
    Reward Points if found helpfull..
    Cheers,
    Chandra Sekhar.

  • Federated portal network to set a chat between different portals

    Hi,
    We need to set a chat between <b>two different portals</b> (each portal is placed in a different geographical location). Our doubt is if it's possible create the chat using a federated portal network.
    We think if we create the chat in the producer portal (enabling collaboration launch pad, instant messaging, etc. etc.) and after we use <b>remote content copy</b>, a user from the consumer portal can access to chat configured in the producer using producer's iViews and collaboration services.
    Is this scenario possible? Do we have to use remote role assigment instead of remote content copy?
    Thanks in advance,
    Samantha.

    There are two discussions going on same topic, we are heading nowhere, please take a part.
    How to create a chat between portals
    /thread/436045 [original link is broken]
    Regards,
    Nitin

  • Replication between different db versions?

    Can anyone tell me what limitations there might be performing data replication between different oracle database versions?
    Thanks

    Depends on the versions and what exactly you mean by "replication", since there are a variety of technologies that may fall under that umbrella.
    You can't directly replicate data between a 7.3.4 database and a 10.1 database, for example. You can use a variety of replication technologies between a 9.2 database and a 10.1 database-- materialized views, multi-master materialized views, Streams, transportable tablesspaces-- though you cannot use things like DataGuard, which may fall under the replication umbrella in some cases.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Import export in different encoding

    Is there a way to change an Import/Export Wizard's output in UTF encoding. Please help.

    please check this:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/fef48cda-dfb9-456e-9a54-ec2d989a47c3/output-utf8-file?forum=sqlexpress

  • Import / Export between pagegroups?

    hi,
    is it possible to use the export/import functionality
    to move pages between pagegroups? how?
    thanks

    No. You need to be at the same revision level of Portal in both source and target environments.
    Best Regards,
    Harry

  • Import / Export between two instances

    Hi everyone, in very new in oracle, i have created two new instances, prod and test, apps team have are now doing the setup on the test instance, is it possible to import and export all the things they have done on the test to the prod once they're finish?
    thanks and regards,
    jmak

    What version of Oracle Application Server are you using? And what type of application (Forms, PL/SQL, Java etc.) are you/they deploying on Oracle Application Server?
    If you are using 10gR2 10.1.2.x, refer this:
    http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/testprod.htm#BHBGBJFH
    Thanks
    Shail

  • Import/Export Between Gschem and PSpice,

    I have some .sch files I made with gEDA's schematic editor (gschem), and am trying to import them into PSpice for Windows. I'm not sure if this is the right community to ask, but I figured I'd just see if anyone here knows how to do it...
    Or, if anyone can point me in the right direction (where to look, who to ask), I'd be very grateful.
    Thanks!

    No. You need to be at the same revision level of Portal in both source and target environments.
    Best Regards,
    Harry

  • Dataguard between different oracle versions

    Can I dataguard an 11.1.0.6 database to a backup 11.2.0.1 database

    For rolling upgrade purposes yes. But only to a Logical standby. And you can also use the transient Logical standby rolling upgrade as well if you are a Physical standby user.
    See the following:
    Mixed Oracle Version support with Data Guard Redo Transport Services (Doc ID 785347.1) on Oracle Support
    MAA Rolling Upgrade paper at http://www.oracle.com/technology/deploy/availability/maa/maa_wp_11g_upgrades_made_easy.pdf
    Transient Logical Standby Rolling Upgrade MAA paper at http://www.oracle.com/technology/deploy/availability/pdf/maa_wp_11g_transientlogicalrollingupgrade.pdf
    Larry

Maybe you are looking for